Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Rotary Switch Supply and Delivery

Active

Federal

Response Deadline09/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense, specifically the Electrical Devices Division, is seeking a subcontract for the supply and delivery of two rotary switches under NSN 5930013666817. The contractor must ensure that all units are fully compliant with military specifications regarding packaging, preservation, and marking. This procurement falls under NAICS code 334419 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 8, 2026, following the posting date of August 27, 2026.

General Info

DoD seeks two rotary switches (NSN 5930013666817) by September 8, 2026, in Pennsylvania.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M8-26-T-6330.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SWITCH, ROTARY

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 27

subcontract

Response DeadlineSep 8

Submission deadline

Response Deadline

09/08/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ELECTRICAL DEVICES DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of 2 units of a rotary switch (NSN: 5930013666817) compliant with military specifications for packaging, preservation, and marking.

Similar Contracts

Same NAICS industry code

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-20EP

This contract is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 22 special purpose electrical cable assemblies, identified by NSN 6150-01-108-3883. The requirement specifies critical application items with associated part numbers from Ametek SCP Inc and Setra Systems, Inc. Delivery is required within 171 days after order, with a need ship date of February 14, 2027, and a final required delivery date of June 14, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA technical and quality requirements, including CMMC Level 2 self-assessment and specific documentation for source approval requests. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while sampling follows MIL-STD-1916 or ASQ H1331. A significant environmental restriction is in place prohibiting the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. The solicitation falls under NAICS code 334419 and requires submission via the DIBBS portal.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE4A6-26-T-19TN

This contract, identified as solicitation SPE4A6-26-T-19TN, is a total small business set-aside issued by the Department of Defense ASC Commodities Division for the procurement of six special purpose electrical cable assemblies. The items are identified by NSN 6150-01-604-8390 and part number EB4765-33-100FA, with identification associated with Brantner and Associates, Inc. and Electric Boat Corporation. The required delivery date is July 30, 2027, with a need ship date of February 14, 2027, and a delivery timeframe of 171 days after receipt of order. Shipping is FOB Origin, with the destination and inspection point located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is subject to strict technical and quality requirements, including adherence to MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, packaging, or marking, except for specific functional exceptions defined by NAVSEA. All supplies must be free of government identification if not accepted.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

CABLE ASSEMBLY, POWER, E

Solicitation # SPE7L4-26-T-6052

This contract is for the procurement of 15 electrical power cable harness assemblies, identified by NSN 6150-01-421-7061 and part number 12448176. The order is issued by the Department of Defense under solicitation SPE7L4-26-T-6052, with the items being delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The required delivery date is June 18, 2027, with a delivery window of 168 days after the order is placed. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and specific cushioning codes are required for connectors wider than one inch. Inspection and acceptance will take place at the destination point.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-19AY

This solicitation, identified as SPE4A6-26-T-19AY and issued by the Department of Defense ASC Commodities Division, is for the procurement of 103 units of a wiring harness, specifically Renk America LLC part number E8DR128-003 and NSN 6150-01-422-4190. This is a critical application item with a required delivery date of July 15, 2027, and a delivery window of 170 days after receipt of order. The contract specifies that delivery is FOB Origin, with both inspection and acceptance occurring at the origin. The procurement is subject to strict quality and technical standards, including DLA packaging requirements and MIL-STD-129 marking. Sampling must adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformances required for acceptance in certain lot sizes. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Shipping is directed to DLA Distribution Anniston in Alabama.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

INDICATOR SUBASSEMB

Solicitation # SPE7M4-26-T-341M

Solicitation SPE7M4-26-T-341M is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for one liquid quantity indicator subassembly, identified by NSN 6680-01-484-7269 and part number 973395. The procurement is managed through the DLA Internet Bid Board System (DIBBS) and may be subject to automated award. The required delivery date is August 6, 2026, with a delivery window of 10 days after receipt of order. Supplies are to be delivered to Fort Sill, Oklahoma, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirements (RP001), with the DLA Master List of Technical and Quality Requirements taking precedence. Environmental and safety compliance is required, specifically prohibiting the use of Class I ozone-depleting chemicals and requiring hazardous material labeling per the Hazard Communication Standard. Administrative requirements include the use of Wide Area Workflow (WAWF) for electronic invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered telecommunications equipment.

FLUID HANDLING DIVISION

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7M1-26-U-5206

DLA Land and Maritime is soliciting quotations for an indefinite-quantity, indefinite-delivery contract for the procurement of toggle switches, identified by NSN 5930-00-069-3487. This solicitation, number SPE7M1-26-U-5206, is a total small business set-aside under NAICS code 334419. The contract is intended for a one-year period with a maximum value of $350,000. While the estimated annual demand is 34 units, the contract includes a guaranteed minimum of 5 units and a minimum delivery order quantity of 17 units. This is a restricted source item manufactured to specific OEM drawings; therefore, any offers for parts from alternative manufacturers must include sufficient technical data for government evaluation. The procurement is subject to various federal and defense regulations, including the Buy American Act, the Berry Amendment, and strict cybersecurity requirements for safeguarding covered defense information. Technical and quality requirements are incorporated via the DLA Master List, and all packaging and marking must comply with MIL-STD-129 and DLA packaging standards. For hazardous materials, contractors must adhere to the Hazard Communication Standard and submit required warning labels and safety data sheets before award. Quotations must be submitted through the DLA Internet Bid Board System (DIBBS). The government will evaluate awardees based on price for the estimated annual demand and technical compliance, with inspection and acceptance occurring at the destination.

MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

MICROCIRCUIT, LINEAR

Solicitation # SPE7M1-26-T-251L

This contract is for the procurement of a linear microcircuit, identified by NSN 5962013948015 and part number 5962-8982401PA, under Federal Supply Class 5962 for electronic microcircuits. The acquisition specifies that the item must be sourced exclusively from approved manufacturers listed on the DLA website, and any offer submitted for a different part number or source is unacceptable. The component must comply with the Standard Microcircuit Drawing (SMD) referenced in the solicitation, and suppliers must certify that all components meet Qualified Product List (QPL) or Qualified Manufacturer List (QML) requirements. The item is designated as a critical application part, necessitating strict adherence to technical and quality requirements embedded in the DLA Master List of Technical and Quality Requirements, including supply chain traceability documentation retention per DLA Directive Procurement Note C03 (August 2016), which mandates that contractors maintain and provide traceability records linking the delivered item to its authorized manufacturer. Packaging and marking requirements are highly specific and tightly regulated to ensure component integrity and authenticity. All items must be packaged per MIL-STD-2073-1E using GX dry preservation methods, with cushioning thick enough to prevent lead damage, and must include ESD/EMI protective materials from approved sources on QPL-81705. Each unit pack must be labeled according to IPC/JEDEC J-STD-609 to clearly indicate lead content (Pb or Pb-free), with placement conforming to the standard’s guidelines. Shipment labeling must follow MIL-STD-129, and all deliveries must be FOB Origin to Columbus, Ohio, with delivery due 154 days after award, no later than February 8, 2027. A mandatory DLA Land and Maritime Form 918, containing traceability and test documentation, must be emailed to the government 15 days before shipment, and no material may be shipped until written authorization is received. The packaging must include a printed copy of the form and the authorization confirmation, and any discrepancy between submitted and delivered documentation will result in rejection and non-final payment. All submissions must be made through DIBBS, with electronic compliance reports limited to 15 MB per email and labeled per strict naming conventions. Contractors must also comply with FAR and DFARS clauses addressing employment practices, cybersecurity, hazardous materials, trafficking in

MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

FILTER, RADIO FREQUENCY

Solicitation # SPE7M5-26-U-0059

Solicitation SPE7M5-26-U-0059 is a request for information issued by the DLA Land and Maritime Active Devices Division for the procurement of Radio Frequency Interference Filters, identified by NSN 5915-01-256-4902 and part number 12359539. This is designated as a critical application item and is set aside for total small businesses under NAICS code 334419. The requirement is for an estimated quantity of 63 units, with a guaranteed contract minimum of 9 units, and an estimated maximum contract value of 350,000 dollars. Delivery is required within 125 days after receipt of order, with shipping terms set as FOB Origin under the First Destination Transportation program. The items must adhere to Technical Data Package Rev B Gen 2 and basic drawing NR 19207 12359539 Revision C. Quality and technical requirements are governed by the DLA Master List, and the contract includes tailored higher level quality requirements for both manufacturers and non-manufacturers. Compliance with CMMC Level 2 self-assessment and covered defense information regulations is required. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with specific labeling requirements for hazardous materials per 29 CFR 1910.1200. Inspection and acceptance will occur at the origin. Award will be based on a trade-off between price and other factors to determine the most advantageous offeror.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

SOCKET, PLUG-IN ELECTRO

Solicitation # SPE7M1-26-U-5169

Solicitation SPE7M1-26-U-5169 is a unilateral Indefinite Delivery Contract issued by the Department of Defense Maritime Supply Chain for the procurement of plug-in electronic component sockets, specifically NSN 5935013984624. The requirement is for an estimated quantity of 942 units with a contract maximum value of 3,500,000.00 dollars. This is a critical application item and a qualified product subject to the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts. Technical specifications are governed by MIL-DTL-12883G and MIL-DTL-12883/52B, with a strict prohibition on the intentional addition of mercury or mercury-containing compounds. Delivery is required within 90 days after receipt of order, with FOB and inspection/acceptance points set at the destination. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must adhere to MIL-STD-129 and include current and superseded part numbers per SAE-AS39029. Hazardous materials must be labeled according to the Hazard Communication Standard 29 CFR 1910.1200. Invoicing and payment requests are to be processed through the Wide Area Workflow system. Quotations must be submitted via the DLA Internet Bid Board System by August 27, 2026.

MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

MICROCIRCUIT, HYBRID

Solicitation # SPE7M1-26-Q-1419

The Defense Logistics Agency, acting on behalf of the Department of Defense, has issued solicitation SPE7M1-26-Q-1419 for the procurement of ten hybrid microcircuits. The items are identified by NSN/Part Number 5962-01-464-2446 and are requested under purchase request 7017601729. This federal solicitation was posted on August 28, 2026, with a response deadline set for September 12, 2026. Interested parties can find further details and submit responses through the DIBBS portal.

Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

CABLE ASSEMBLY, RADI

Solicitation # SPE4A6-26-T-19TE

This contract is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of ten cable assemblies, identified by NSN 5995015597086. The items are designated as critical application items and are associated with B/E Aerospace part number E29682-2325-1 and Boeing part number 30B9E2100-1. The delivery is required within 171 days after order, with a need ship date of February 14, 2027, and an original required delivery date of April 25, 2027. Shipping is FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement incorporates strict technical and quality standards, including DLA master lists of requirements, packaging standards per MIL-STD-2073-1E and RP001, and marking requirements according to MIL-STD-129. Quality assurance is governed by sampling methods such as MIL-STD-1916 or ASQ H1331, with specific verification levels for critical, major, and minor attributes. Additionally, the contract mandates compliance with Covered Defense Information protocols and requires a Cybersecurity Maturity Model Certification CMMC Level 2 self-assessment.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

FILTER SUBASSEMBLY

Solicitation # SPE7M5-26-T-413X

Solicitation SPE7M5-26-T-413X is a fixed-price request for quotations issued by the DLA Land and Maritime Active Devices Division for the procurement of 25 filter subassemblies, identified by NSN 5915-01-416-8113. The requirement is designated as a critical application item with a delivery period of 168 days after the award. Delivery is specified as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot at Hill AFB, Utah. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 Self-Assessment and the DLA Master List of Technical and Quality Requirements. Packaging must comply with MIL-STD-129 for marking and labeling, with specific palletization requirements under RP001. Hazardous materials must be handled according to FED-STD-313 and TQ requirement IP025. Offerors must comply with domestic sourcing restrictions, including the Buy American Act and the Berry Amendment, and utilize the Wide Area WorkFlow system for electronic invoicing and payment.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

SWITCH, PRESSURE

Solicitation # SPE7M8-26-Q-0228

This solicitation, numbered SPE7M8-26-Q-0228, is for the procurement of 72 pressure switches under NSN 5930-01-309-4365 for the Department of Defense Electrical Devices Division. The contract requires delivery within 120 days after order and mandates strict adherence to source controlled drawings, meaning only approved sources cited on the drawing are eligible unless otherwise qualified through the cognizant design activity. The agreement includes rigorous technical and quality standards, including DLA packaging requirements, higher level quality controls, and a prohibition on Class I ozone depleting chemicals. Additionally, the contract is subject to strict cybersecurity and export control regulations, specifically ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to handle export-controlled technical data.

Current-Carrying Wiring Device Manufacturing

POSTED

about 20 hours ago

DEADLINE

SWITCH, PRESSURE

Solicitation # SPE7M8-26-T-6004

Solicitation SPE7M8-26-T-6004 is a total small business set-aside request for quotations issued by the DLA Land and Maritime Electrical Devices Division for the procurement of 26 pressure switches, identified by NSN 5930004637442. The required delivery date is June 18, 2026, with a need ship date of June 8, 2026, and a delivery period of 144 days. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Warner Robins in Georgia. Due to insufficient controlling drawings and source data, this is a critical application item requiring a comprehensive data package from all potential sources. Offerors must provide detailed mechanical, physical, material, environmental, and electrical specifications, along with a proposed test plan based on industry, MIL-SPEC, or government standards. Failure to submit this data package will result in a technical non-responsive determination. The procurement is subject to the Buy American Act and the Berry Amendment, and all packaging must comply with MIL-STD-129 and RP001, with specific requirements for hazardous materials under FED-STD-313 and TQ requirement IP025. All quotes must be submitted via the DLA Internet Bid Board System.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 20 hours ago

DEADLINE

Packaging & Hazardous Materials Compliance

Packaging and Labeling Services

POSTED

DEADLINE

Small Business Subcontracting & Representation Support

Other Management Consulting Services

POSTED

DEADLINE

Domestic Sourcing & Buy American Compliance Support

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Toggle Switch Supply (NSN: 5930010870317)

Other Electronic Component Manufacturing

POSTED

DEADLINE

Domestic Sourcing and Trade Compliance Advisory

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Military-Compliant Packaging and Marking Service

Tobacco Manufacturing

POSTED

DEADLINE

Push Switch Component Supply

Other Electronic Component Manufacturing

POSTED

DEADLINE

Supply of Push Switches (NSN 5930-01-304-6671)This subcontract with the Department of Defense Electrical Devices Division involves the manufacture and delivery of 12 military-spec push switches under NSN 5930-01-304-6671. The contractor is required to provide a full technical data package for both approved and alternate parts. The items must be delivered FOB origin to Tracy, California, within a timeframe of 121 days. The opportunity was posted on August 27, 2026, with a response deadline of September 8, 2026, falling under NAICS code 334419.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Domestic Sourcing and Buy American ComplianceThis subcontract opportunity, titled Domestic Sourcing and Buy American Compliance, is issued by the Department of Defense under the Electrical Devices Division. The contract requires strict adherence to the Buy American Act, the Berry Amendment, and the Balance of Payments Program, necessitating verified domestic sourcing and detailed origin documentation for all components. The solicitation is categorized under NAICS code 423690 and specifies a place of performance in Tracy, California. Interested parties must submit their responses by the deadline of September 8, 2026, following the posting date of August 27, 2026.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

Cybersecurity Compliance (CMMC Level 2 Self-Assessment)This subcontract opportunity with the Department of Defense Electrical Devices Division requires the performance of a CMMC Level 2 self-assessment. The primary objective is to ensure compliance with NIST SP 800-171 requirements for the protection of controlled unclassified information within DoD systems. The work is categorized under NAICS code 541512 and will be performed in Tracy, California. Interested parties must submit their responses by September 8, 2026. The solicitation was officially posted on August 27, 2026, and further details can be accessed through the DIBBS portal.

Computer Systems Design Services

POSTED

DEADLINE