Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

RV Electrical and Solar Power System Integration

Active

Federal

Response Deadline08/05/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the design and installation of 12V DC electrical systems, battery banks, inverters, and solar charging kits tailored for off-grid operation in recreational vehicles. The work must support reliable, self-sustaining power solutions in remote or mobile environments, with specifications centered on efficiency, durability, and compatibility with RV infrastructure. All components must be properly integrated to ensure seamless energy storage and conversion, with an emphasis on solar energy harvesting as the primary power source. The opportunity is posted as a subcontract under NAICS code 238210, associated with the Department of Defense through the agency designation FA2543 460 Cons, with performance required in Aurora, Colorado, 80011. Bidders must submit responses by August 5, 2026, at 7:00 PM, following the posted deadline. The contract seeks qualified providers with proven expertise in mobile electrical systems and solar power integration for off-grid applications, particularly within defense-related or military-supportive recreational vehicle contexts.

General Info

Design and install off-grid 12V solar electrical systems for RVs in Aurora, Colorado, by August 5, 2026.

Agency

Department Of Defense → FA2543 460 ConsView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Aurora, CO, 80011, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 07:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA2543 460 Cons

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA2543 460 Cons

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design and installation of 12V DC electrical systems, battery banks, inverters, and solar charging kits for off-grid operation in recreational vehicles.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, three service elevators, and three ramp landing elevators. This work is part of a broader effort to enhance emergency communication infrastructure within the airport facility and is being managed by the Aviation Project Management Group under the Port of Seattle. The project is forecasted with a posting date of July 31, 2026, and falls under NAICS code 238210, indicating it pertains to electrical contracting services. Primary point of contact is Angela Peterson, with Christina Burdett serving as the project manager, and all correspondence should be directed through the provided email addresses and phone numbers. The work location is at the Port of Seattle facility, though specific city or state details are not provided in the data.

Aviation Project Management Group

POSTED

about 13 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle will replace 125 aging Robicon variable frequency drives (VFDs) with new equipment as part of Phase 3 of its VFD Replacement initiative. This effort aims to upgrade outdated infrastructure to ensure system reliability and improve operational efficiency across aviation facilities and infrastructure. The new VFDs will be fully integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking, enhancing the Port’s ability to manage power consumption and maintain optimal performance. The scope includes all necessary wiring, testing, commissioning, and installation of associated equipment required to deliver a fully functional and synchronized system. The work falls under NAICS code 238210 and is managed by the Aviation Facilities & Infrastructure division, with technical oversight from Project Manager Sharon Miick and primary point of contact Yanet Maldonado. Although the solicitation number and set-aside details are not specified, the forecast was posted on July 31, 2026, signaling upcoming procurement activities. The project is critical for modernizing the Port’s electrical infrastructure and supporting long-term sustainability goals through precise control and monitoring of motor-driven systems. All work must be performed on-site at the Port’s facilities, with full accountability for system integration, performance validation, and operational readiness upon completion.

Aviation Facilities & Infrastructure

POSTED

about 13 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract requires the provision of design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and enforcement capabilities by replacing outdated systems with improved coverage, specifically targeting main terminal drive lanes and entrances previously unmonitored, with the goal of supporting forensic investigations and adherence to port movement rules. In the Bagwell area, the new cameras will shift focus from conveyor systems and security doors to critical transit corridors, while the North Cargo operations will benefit from flexible, user-controlled Pan Tilt Zoom units that provide broad surface area monitoring and dynamic viewing capabilities to address operational gaps. All work must be completed in accordance with specified technical and operational standards to ensure seamless integration with existing security infrastructure. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The North American Industry Classification System code 238210 identifies this as a specialty trade contracting effort focused on electrical and communication system installation. Although the solicitation has not yet been formally issued, the forecasted posting date is July 31, 2026, indicating this is a forward-looking opportunity for qualified contractors to prepare proposals. The place of performance is within the Port of Seattle’s operational boundaries, and all contractors must be prepared to navigate port-specific logistics, security protocols, and environmental constraints during installation and commissioning.

Aviation Project Management Group

POSTED

about 13 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing Aqueous Film Forming Foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac with a full dry chemical system to eliminate contamination from per- and polyfluoroalkyl substances (PFAS). The project entails the complete removal of the current foam-based system, including all contaminated components such as tanks, piping, and sprinkler heads, followed by the design and installation of a new dry system comprising new storage tanks, control valves, pumps, sprinkler lines, and sprinkler heads, along with reserve tanks for system integrity. The new system must be fully integrated with the facility’s existing Fire Alarm System to ensure seamless operation and compliance with safety protocols. The work is classified under NAICS code 238210 and is being advertised as a re-bid under the title Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement, targeting an efficient and timely execution to minimize service disruption. Primary point of contact for inquiries is Todd Rehm, with Pat Nakamura serving as the Project Manager.

Aviation Project Management Group

POSTED

about 13 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demonstration and full replacement of the existing uninterruptible power supply (UPS) system in a parking garage that supports critical operations including ticketing kiosks and automated gates. The scope includes installing new UPS equipment along with associated electrical infrastructure such as subpanels, feeders, disconnects, and circuit breakers to ensure reliable backup power. The new UPS system will feature integrated data connections to enable remote alarm monitoring and system diagnostics, enhancing operational awareness and response capabilities. All work will be performed at the Port of Seattle’s parking facility, under the oversight of the Aviation Project Management Group. The project is forecasted to be released on July 31, 2026, with no set-aside provisions indicated and NAICS code 238210 specifying electrical contracting services. Primary point of contact is Yanet Maldonado, reachable via email and phone, with JJ Jordan serving as the project manager for coordination and technical inquiries. All work must comply with the operational and safety standards required by the Port of Seattle, and performance is expected to be completed at the designated parking garage location without specified alternative sites.

Aviation Project Management Group

POSTED

about 13 hours ago

DEADLINE

Electrical Unit Price Portwide 2026_1 and _2This contract encompasses a broad range of electrical services to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, maritime properties, and surrounding areas. The work includes but is not limited to the installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, grounding, and associated testing, all in full compliance with applicable codes and regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidentals required to complete tasks as directed through Work Authorizations issued by the Port. Labor must be delivered according to the specified classifications outlined in the Schedule of Unit Prices, ensuring consistent pricing and accountability. The Port of Seattle anticipates a high volume of small-scale electrical projects over the coming year and plans to award two separate contracts under this solicitation to ensure sufficient capacity and rapid response times. The goal is to maintain operational continuity and meet dynamic project demands by leveraging two qualified contractors. The contract is identified under the NAICS code 238210 and is issued through Port Construction Services, with primary coordination handled by Heather Bowden and Lesley Miles. All work must be performed at designated Port-wide locations, and contractors are expected to adhere strictly to the terms and pricing structure detailed in the bid documents.

Port Construction Services

POSTED

about 13 hours ago

DEADLINE

Perimeter Security and Intrusion DetectionThe contract titled Perimeter Security and Intrusion Detection involves the supply and installation of a comprehensive security system for the Dekalb County School District in Georgia, including motion sensors, door and window alarms, glass break detectors, and perimeter fencing integrated with an alarm system. The work is classified under NAICS code 238210, indicating it is a subcontract related to electrical and other construction installation services, and is intended to enhance the physical security infrastructure of school facilities. The solicitation was posted on July 30, 2026, with a response deadline of August 27, 2026, providing interested vendors a four-week window to submit proposals. The place of performance is within the school district’s jurisdiction, though specific locations are not detailed, implying the work may be distributed across multiple campuses. The contract is not subject to any set-aside provisions, and all bidders must ensure compliance with technical specifications for device integration, durability, and alarm system synchronization to meet the district’s safety requirements.

Dekalb County School District

POSTED

about 20 hours ago

DEADLINE

Video Surveillance and Security Camera SystemsThe contract pertains to the design, supply, installation, and ongoing monitoring of IP-based closed-circuit television systems for the Dekalb County School District in Georgia. It encompasses all necessary hardware and software components including network cameras, network video recorders, data storage solutions, and remote viewing capabilities to ensure comprehensive security coverage across school facilities. The work must be executed in accordance with technical specifications that support seamless integration, reliable performance, and long-term operational effectiveness within the district’s existing infrastructure. All bids must be submitted by the deadline of August 27, 2026, and the contract is categorized as a subcontract under NAICS code 238210, indicating it falls within the electrical and other wiring installation contracting sector. The project requires strict adherence to industry standards for surveillance technology and emphasizes secure, scalable, and remotely accessible video monitoring to enhance school safety. The scope demands qualified vendors capable of end-to-end delivery, from initial system planning through final commissioning and support, with an expectation of compliance with all applicable state and federal security protocols for educational environments.

Dekalb County School District

POSTED

about 20 hours ago

DEADLINE

Electronic Access Control SystemsThe contract entitled Electronic Access Control Systems is a subcontract issued by the Dekalb County School District in Georgia for the supply and installation of comprehensive electronic security systems across school buildings. It encompasses the procurement and deployment of electronic door locks, keycard readers, biometric scanners, and a centralized access management software platform designed to modernize and secure facility entry points. The system will enable automated, auditable, and scalable control over who can access which areas, with the software providing real-time monitoring, user management, and emergency response capabilities tailored to the needs of a school environment. All components must be integrated to function as a unified system, ensuring seamless operation, compatibility, and compliance with educational facility safety standards. The solicitation was posted on July 30, 2026, with a response deadline of August 27, 2026, allowing interested vendors a limited window to submit proposals. The North American Industry Classification System code 238210 indicates the work falls under electrical and other construction installation services, suggesting the contractor must have expertise in both hardware installation and networked software integration. The place of performance is within the Dekalb County School District’s properties, though specific locations are not detailed. The subcontract nature implies the primary contract may be managed by a higher-tier prime contractor, and bidders must be prepared to meet stringent technical, logistical, and potentially security clearance requirements to deliver and support the system effectively across multiple school sites.

Dekalb County School District

POSTED

about 20 hours ago

DEADLINE

RFP - UPS-C Replacement and Distribution - 1825 St

Solicitation # ST-Doc5815124698

SaskTel is inviting qualified suppliers to submit proposals for the replacement and distribution of an uninterruptible power supply system at 1825 Lorne Street in Regina, Saskatchewan, under solicitation number ST-Doc5815124698. The project requires the installation of a new 2MW UPS system complete with input switchgear and output distribution panels, followed by the full removal of the existing unit. Participation is mandatory through SaskTel’s Ariba e-sourcing platform, and all interested suppliers must first register or ensure their existing Ariba account is properly linked to SaskTel’s domain to gain access. Only registered and approved suppliers will be considered, and access to the opportunity must be formally requested via email or phone. Key mandatory requirements include COR certification and bonding, and all participants must attend a mandatory site walkthrough on August 13, 2026, at 9:00 AM. Proposals must be submitted by August 27, 2026, and the contract term extends from award date through November 15, 2028. This procurement is governed by Chapter 5 of the Canadian Free Trade Agreement, and all inquiries should be directed to SaskTel’s Corporate Services Contracts team.

Saskatchewan Telecommunications

POSTED

about 20 hours ago

DEADLINE

Holiday Lighting Installation, Maintenance & Strike Services Longhorn Lights

Solicitation # 721-26004

The University of Texas at Austin is seeking qualified vendors to provide comprehensive holiday lighting services for the Longhorn Lights program, encompassing annual installation, maintenance, and complete strike of the university-owned lighting inventory. Work must be executed in accordance with detailed design drawings, renderings, and schematics developed by the UEE production team, ensuring alignment with the university’s aesthetic and operational standards. The vendor is responsible for all consultation, on-site adjustments, and full removal of equipment after the event period, with services rendered on an as-needed basis throughout the year as required by the university’s scheduling and programming needs. All proposals must be submitted by the deadline of August 17, 2026, in response to solicitation number 721-26004, which was posted on July 30, 2026. The procurement is managed by the University of Texas at Austin under the State and Local Government (SLED) category, with performance required in Texas. Primary point of contact for inquiries is Lina-Courtney Trejo, reachable via email at lina.trejo@austin.utexas.edu or by phone at 210-784-7316. Vendors are expected to demonstrate proven experience in large-scale lighting installations and the ability to work within strict design parameters while adhering to safety and logistical requirements on campus.

University of Texas at Austin

POSTED

about 22 hours ago

DEADLINE

Kindersley Early Years Family Resource Centre Life Safety Upgrades

Solicitation # SWSD-2026015

The Sun West School Division No. 207 is seeking qualified contractors to bid on the Kindersley Early Years Family Resource Centre Life Safety Upgrades project, solicited under SWSD-2026015, with a response deadline of August 27, 2026. The scope includes the full installation of a new fire alarm system and the replacement or installation of exit and emergency lighting throughout the facility, as specified in the technical documents prepared by Alfa Engineering Ltd. All work must comply with applicable codes and standards for life safety systems in public buildings, and bidders are expected to review all project documentation thoroughly before submitting proposals. The project is located in Kindersley, Saskatchewan, and is intended to enhance the safety and regulatory compliance of the early years center. Interested parties must direct all inquiries to Alfa Engineering Ltd., the designated point of contact, via phone at 306-352-7989 or email at alfa@alfaengltd.com. Tenders must be submitted through the SaskTenders portal by the stated deadline, and no late submissions will be accepted. The division has not designated any specific set-aside programs, making this an open opportunity for eligible contractors. Bidders are advised to verify site conditions, understand system integration requirements, and ensure all proposed equipment and installations meet current provincial fire and building safety regulations. The contract award will be based on technical competence, compliance, and competitive pricing.

Sun West School Division No. 207

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → FA2543 460 Cons

Same awarding agency

Transportation and Final Delivery LogisticsThe contract requires the secure transportation and final delivery of completed camper trailers from the manufacturer to Buckley Space Force Base, encompassing all logistics coordination such as route planning, obtaining necessary permits, and securing base access clearance. The work involves end-to-end management of the haul, ensuring timely and safe conveyance of the trailers while complying with all military and transportation regulations. Performance is specifically directed to the Aurora, Colorado area with a zip code of 80011, indicating the final delivery point within or near the base perimeter. This is a subcontract under NAICS code 484220, classified as a specialized freight transportation service, and was posted for responses with a deadline of August 5, 2026. The contracting activity is under the Department of Defense, specifically identified as FA2543 460 Cons, and the obligation extends to coordinating with military authorities to meet stringent access and security protocols. All parties must be prepared to handle sensitive logistics requirements associated with DoD facilities, including potential restrictions on timing, vehicle specifications, and personnel credentials.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Appliance Supply for RVsThe contract pertains to the supply of specialized appliances designed for recreational vehicles, including absorption refrigerators, two-burner stoves, and rooftop air conditioning units, all of which must meet stringent requirements for dual-fuel operation and vibration resistance to ensure reliable performance in mobile environments. These appliances are intended for integration into RVs used by military personnel or government-supported operations, necessitating durable, high-efficiency components capable of withstanding the rigors of travel and varied environmental conditions. Submissions are due by August 5, 2026, and the opportunity is classified as a subcontract under NAICS code 423620, indicating a focus on wholesale trade of appliances and electronics. Performance of the contract is expected to be tied to the Aurora, Colorado area with zip code 80011, though the contracting office is identified under the Department of Defense, specifically FA2543 460 Cons. While no set-aside status is specified, the solicitation is open to qualified subcontractors who can deliver compliant products by the deadline, with further details accessible through the provided SAM.gov portal link.

Household Appliances, Electric Housewares, and Consumer Electronics Merchant Wholesalers

POSTED

DEADLINE

Plumbing and Freshwater System InstallationThe contract pertains to the installation of freshwater tanks, pumps, sinks, showers, and gray water systems specifically designed for compact recreational vehicle configurations, with an emphasis on freeze-resistant and leak-proof construction to ensure functionality in extreme conditions. All components must meet rigorous performance standards to maintain system integrity under varied environmental and operational demands, particularly in mobile and confined spaces. The work involves precise integration of plumbing systems within existing RV chassis and structure, requiring expertise in compact design, material durability, and code-compliant installations. This is a subcontract under NAICS code 238220, issued by the Department of Defense through the agency designation FA2543 460 Cons, with performance required at Aurora, Colorado, 80011. The solicitation was posted on July 30, 2026, and responses are due by August 5, 2026, at 7:00 PM. While no set-aside type is specified, the procurement is structured to support defense-related mobile infrastructure needs, and contractors must be prepared to meet stringent quality and timeline requirements tied to military or federal operational use.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

RV Interior Cabinetry and Millwork FabricationThe contract involves the fabrication of custom cabinetry, bunk systems, storage units, and interior woodwork specifically designed for compact, multi-functional RV layouts, with an emphasis on lightweight and moisture-resistant materials to ensure durability and space efficiency. All work must adhere to high manufacturing standards suitable for mobile environments, prioritizing structural integrity, functional design, and aesthetic finish under the NAICS code 337110 for wood furniture manufacturing. The project is issued as a subcontract under the Department of Defense, managed by FA2543 460 Cons, with performance required in Aurora, Colorado, at the zip code 80011. Responses are due by August 5, 2026, at 7:00 PM, with the solicitation posted on July 30, 2026, offering a seven-day window for interested parties to submit proposals. The contract does not specify a set-aside designation, and no point of contact is listed, but all submissions must align with the technical requirements for RV-specific interior woodwork and be delivered to the designated performance location. The work demands precision craftsmanship and material selection capable of withstanding the unique stresses of travel, humidity, and frequent use in confined spaces.

Wood Kitchen Cabinet and Countertop Manufacturing

POSTED

DEADLINE

RV Chassis and Trailer Frame SupplyThe contract seeks suppliers to provide durable, lightweight trailer chassis and frames capable of supporting a gross vehicle weight rating of 3,000 pounds or more, designed specifically for integration with custom camper bodies while meeting all applicable Department of Transportation towing standards. The components must be engineered for reliability under heavy use, ensuring structural integrity and compatibility with a wide range of RV body configurations without compromising safety or performance. All deliveries must align with established federal compliance requirements and be capable of seamless incorporation into end-user manufactured units. This subcontract is issued under NAICS code 336211 by the Department of Defense through the FA2543 460 Cons office, with performance required in Aurora, Colorado, ZIP 80011. Responses are due by August 5, 2026, at 7:00 PM ET, following a posting date of July 30, 2026. While no set-aside designation is specified, eligible vendors must be prepared to meet all technical specifications, quality controls, and timelines associated with defense-related supply chains. The opportunity is open to qualified contractors with proven experience in manufacturing certified trailer frames for recreational vehicle applications, and all proposals must demonstrate adherence to DOT regulations and the ability to scale production as needed.

Motor Vehicle Body Manufacturing

POSTED

DEADLINE

Custom Towable Camper Trailer ManufacturingThe contract requires the full design, fabrication, and assembly of five towable camper trailers without slide-outs, with each unit meeting a strict dry weight range of 2,500 to 2,800 pounds and capable of comfortably accommodating four to five occupants. The trailers must comply with all applicable federal safety standards, ensuring structural integrity, braking systems, lighting, and towing compatibility meet or exceed regulatory requirements. The scope encompasses end-to-end production from initial engineering and material sourcing to final assembly and quality assurance, with no component or subsystem外包 permitted. The trailers are intended for functional, durable recreational use under diverse environmental conditions. This subcontract is issued under NAICS code 336212 for Motor Homes and Recreational Vehicle Manufacturing and is linked to the Department of Defense through the agency designation FA2543 460 Cons, with performance required at Aurora, Colorado, ZIP 80011. The solicitation was posted on July 30, 2026, and responses are due by August 5, 2026, at 7:00 PM Eastern Time, indicating a compressed five-day window for submission. While no specific set-aside classification is provided, the contract is open to qualified commercial manufacturers able to deliver on the technical, timeline, and compliance demands without deviation. All proposals must demonstrate proven capability in recreational vehicle manufacturing, adherence to weight and capacity specifications, and a clear plan for meeting federal safety mandates.

Truck Trailer Manufacturing

POSTED

DEADLINE

RFQ - Buckley SFB - 18FT PONTOON BOAT

Solicitation # RFQBuckleySFB18FTPONTOONBOAT

The 460th Contracting Squadron at Buckley Space Force Base is soliciting quotes for a single new, unused, and non-refurbished 18-foot pontoon boat complete with a marine outboard motor rated between 50 and 90 horsepower, a compatible galvanized or aluminum trailer equipped with a winch, tie-downs, and a spare tire, and all necessary accessories including a bimini top, boat cover, boarding ladder, anchor, and a full set of U.S. Coast Guard-approved safety equipment. The vessel must accommodate a minimum of eight to ten passengers and be delivered fully assembled, safety-inspected, and ready for immediate use at the Outdoor Recreation Center located at Building 1022 on Aspen Street, Buckley SFB, Colorado. All deliveries must occur within 60 calendar days after receipt of order, and contractor personnel and drivers must pass a background check to gain access to the installation. The Government intends to award a Non-Appropriated Funds Firm-Fixed-Price contract using a Lowest Price Technically Acceptable evaluation method, meaning offers must meet all technical requirements without exception to be considered. Offers must include a firm-fixed-price quote for the complete package, a detailed technical description demonstrating compliance with each specification, warranty information, company details including CAGE Code and UEI number, and confirmation of active SAM registration. Submissions must reference the RFQ number FA254326Q0020 and title ODR 18ft Pontoon Boat in the email subject line and be sent to both the Contracting Officer and Contract Specialist. Funds are not yet available, and no legal obligation is created until appropriation is confirmed. The deadline for responses is August 5, 2026, and the solicitation is issued under the Revolutionary Federal Acquisition Regulation Overhaul framework as a combined synopsis and solicitation with no separate written document to follow.

POSTED

DEADLINE

Engineering & Project ManagementThe contract involves technical oversight and project management for the deployment of secure VoIP conferencing systems at Buckley Space Force Base in Aurora, Colorado, with a ZIP code of 80011. It requires comprehensive coordination across multiple suppliers and installation teams to ensure seamless integration and operational readiness of the communications infrastructure. The work is classified as a subcontract under NAICS code 541311, indicating it falls within the engineering services category, and is being managed by the Department of Defense under the organization FA2543 460 Cons. All activities must be executed in alignment with stringent security protocols appropriate for military applications. The solicitation was posted on July 28, 2026, and responses are due by August 2, 2026, indicating a narrow window for submission. While no specific set-aside details are provided, the contract is targeted for a subcontractor capable of delivering project-managed engineering services in a secure, high-stakes environment. The place of performance is fixed at Aurora, and all deliverables must meet the technical, temporal, and security requirements dictated by the Department of Defense. Performance will demand rigorous scheduling, risk mitigation, and cross-functional team synchronization to ensure timely and secure system deployment.

POSTED

DEADLINE

T1 PRI Gateway ImplementationThe contract seeks the supply and integration of a 4-span T1 Primary Rate Interface gateway designed for secure wide area network connectivity, specifically compatible with the Consortium III platform. This subcontract is focused on delivering a hardware solution that enables reliable and encrypted voice and data transmission over T1 circuits, ensuring compliance with Department of Defense communication standards. The equipment must be fully integrated and tested to operate seamlessly within the existing secure infrastructure, with all components meeting stringent security and performance requirements. The opportunity was posted on July 28, 2026, with a response deadline of August 2, 2026, and falls under NAICS code 334220 for telecommunications equipment manufacturing. The place of performance is designated as Aurora, Colorado, with the contracting activity under the Department of Defense using the agency identifier FA2543 460 Cons. The work involves not only the provision of the gateway hardware but also its configuration, installation, and verification to meet operational readiness. All submissions must demonstrate technical capability, compliance with security protocols, and readiness for immediate deployment upon award.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

DoD/JITC Certified Installation ServicesThe contract requires on-site installation, configuration, and JITC certification of VoIP conferencing equipment to support secure Department of Defense communications systems. All work must be performed at the designated location in Aurora, Colorado, with precise adherence to DoD security standards and JITC certification protocols to ensure the equipment meets stringent compliance requirements for classified and sensitive communications. The services are to be delivered under a subcontract arrangement, with the North American Industry Classification System code 541330 indicating telecommunications and information technology services as the primary category. Bidders must submit their proposals by August 2, 2026, with no flexibility beyond the deadline, and the work must be conducted entirely on-site to meet operational and security constraints. The contracting organization is the Department of Defense under FA2543 460 Cons, emphasizing that only qualified contractors with proven experience in DoD-compliant VoIP deployments and JITC certification processes should respond. The success of the contract hinges on technical precision, timing, and the ability to deliver certified systems that are immediately operational within the DoD’s secure infrastructure.

Engineering Services

POSTED

DEADLINE

VoIP Conferencing Server Equipment SupplyThe contract requests the supply of secure VoIP conferencing server hardware and software components that meet Department of Defense Unified Communications and Collaboration Standards, specifically for deployment at Buckley Space Force Base located in Aurora, Colorado, with a ZIP code of 80011. The equipment must be fully compliant with UCCS requirements to ensure secure, encrypted, and resilient communication capabilities for military operations. This is a subcontract under NAICS code 334210 for communications equipment manufacturing, and the solicitation was posted on July 28, 2026, with proposals due by August 2, 2026. The contracting authority is the Department of Defense through the FA2543 460 Cons office, and performance is solely localized to the Aurora site. All deliverables must adhere to DoD security protocols and be capable of integration into existing classified communication infrastructure.

Telephone Apparatus Manufacturing

POSTED

DEADLINE

FA2543 Buckley SFB Conference Bridge

Solicitation # FA2543ConferenceBridge

This sources sought notice issued by the Department of Defense seeks market research to determine the appropriate procurement method for acquiring Consortium III VoIP grade conferencing server equipment to be delivered to Buckley Space Force Base in Colorado. The intent is to evaluate industry capabilities and identify potential suppliers, but no formal solicitation or award is guaranteed at this stage, and unsolicited quotes are not accepted. The requirement centers on the delivery of specific conferencing server hardware that meets VoIP standards for secure and reliable communication, with focus on compatibility with the Department of Defense Information Network Approved Products List. Respondents are asked to evaluate whether the assigned NAICS code 334310 is appropriate, suggest alternative systems on the DoDIN APL, confirm if Consortium III is proprietary, and validate if 60 days from award is sufficient for delivery to Buckley SFB. Additional inquiries include pre-priced contract vehicles, commercial and extended warranty terms, and company details such as contact information, CAGE/DUNS numbers, and existing contract vehicles for validation. Responses are due by August 2, 2026, and should be submitted to the designated point of contact at Buckley SFB.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE