This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on July 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

S351 and S354 Dam Gate Seal Assembly Sets

Closed

W19EP26QA015Federal

Submission Closed07/31/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # FA446026Q0053

Solicitation FA446026Q0053 is a firm-fixed-price contract set aside for small businesses to provide all personnel, equipment, and materials necessary to replace playground surfacing at two infant areas in front of Building 1257 at the Little Rock Air Force Base Child Development Center. The scope of work includes the demolition and legal disposal of existing materials and the installation of a new pour-in-place rubber surface consisting of a 3/4-inch black SBR base layer and a 1/4-inch EPDM top layer in a 50/50 mixture of tan and light green. The project must adhere to ADA accessibility guidelines, ASTM F1951, and ASTM F1292 fall protection standards, with a total area of 1,188 square feet. The contractor is required to provide a minimum one-year warranty on all materials and workmanship. The period of performance is 60 calendar days after award. Award decisions will be based on best value, with price and technical capability considered equal in importance. Technical evaluations will use a binary acceptable or unacceptable rating. Contractors must be registered in SAM.gov with a mandatory CAGE code and comply with strict installation access requirements, including REAL ID verification and OPSEC protocols. Payment will be processed through the Wide Area WorkFlow (WAWF) system. Offers are due by September 14, 2026, at 2:00 PM CDT via email to the designated points of contact.

POSTED

DEADLINE

Supply of Nonmetallic Special Shaped Sections (NSN 9390-00-4207896)This subcontract with the Department of Defense, specifically DLA Dist San Joaquin, involves the supply of 35 nonmetallic special shaped sections under NSN 9390-00-4207896. The required components must match either Rubbercraft P/N 1602 or Boeing P/N HS4027-14400 and are intended for use by prime contractors on DLA Troop Support construction and equipment projects. Performance is based in Tracy, California, under NAICS code 325212. The supplier is responsible for manufacturing or sourcing the units and ensuring all items are packaged and labeled according to RP001, ASTM D3951, and MIL-STD-129 standards. Additionally, the contractor must comply with RD003 regulations regarding the safeguarding of Covered Defense Information. The response deadline for this requirement is September 14, 2026.

POSTED

DEADLINE

NONMETALLIC SPECIAL SH

Solicitation # SPE8E5-26-T-4152

Solicitation SPE8E5-26-T-4152 is a fixed-price request for quotations issued by DLA Troop Support, Construction and Equipment for the procurement of 35 units of a nonmetallic special shaped section, identified by NSN 9390004207896. The requirement specifies part number 1602 from Rubbercraft Corporation of California or part number HS4027-14400 from The Boeing Company. The need ship date is March 1, 2027, with an original required delivery date of March 13, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract incorporates several technical and quality requirements, including RP001 for packaging, RD003 for covered defense information, and RA001 for the DLA Master List of Technical and Quality Requirements. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. The solicitation is subject to NAICS code 325212 and includes various FAR and DFARS clauses, such as the Buy American and Balance of Payments Program and safeguarding of covered defense information. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the use of additive manufacturing is prohibited unless specifically authorized.

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-4253

This federal solicitation, issued by the Department of Defense under the DDSP New Cumberland Facility, is for the procurement of 116 rubber strips identified by NSN/Part Number 9320-01-652-7256. The contract requires delivery within 229 days after the order is placed. The primary point of contact for this requirement is Nafis Beyah. The contractor must adhere to strict quality assurance protocols, including the submission of a Production Lot Test report to the Quality Assurance Representative for review. Required shipping documentation includes DD Form 1222, a signed DD Form 250/iRAPT receiving report, a copy of the contract, material and process certifications, and detailed test reports showing actual results against technical data package tolerances.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

The BioMaP consortium has issued a solicitation, identified as 26-04-NBR under solicitation number 24231, seeking project proposals for the sustainment of personal protective equipment capacities specifically focusing on Nitrile Butadiene Rubber. This initiative falls under NAICS code 325212 and is aimed at maintaining critical manufacturing capabilities for NBR materials. The request for proposals was posted on August 6, 2026, and requires all responses to be submitted by the deadline of October 6, 2026, at 5:00 PM. Interested parties can find further details and submission guidelines through the official BioMaP consortium website.

POSTED

DEADLINE

Personal Protective Equipment (PPE) SupplyThe contract involves the supply of personal protective equipment essential for the safety of clinical staff, including N95 masks, face shields, gowns, shoe covers, and respirators, all critical for maintaining infection control in healthcare settings. The procurement is structured as a subcontract under the Western Regional Health Authority, which operates under the Government of Jamaica, with the North American Industry Classification System code 325212 indicating the manufacturing of other pharmaceutical and medicinal products. The solicitation was posted on July 16, 2026, and though no specific location for performance or point of contact is provided, the emphasis is on ensuring timely and reliable delivery of high-quality PPE to support frontline healthcare workers across the region. The absence of a set-aside designation suggests the opportunity is open to all qualified suppliers regardless of business size or demographic classification.

Western Regional Health Authority

POSTED

about 2 months ago

DEADLINE

N/A

AI Contract Overview

The U.S. Army Corps of Engineers, Jacksonville District, is soliciting commercial bids for five dam gate seal assembly sets—three S351 and two S354—under solicitation number W19EP26QA015. These seals are specialized rubber assemblies requiring strict material properties including a durometer of 60–70, tensile strength of 3000 PSI, minimum elongation of 450%, and low water absorption capped at 5%. Both seal types feature J-bulb top and side profiles with PTFE cladding, VOSB molded corners, and hot-vulcanized splices to precise dimensions, while the bottom seals are flat and one inch thick. The S351 seals measure 20 feet 9-3/4 inches wide by 8 feet high, and the S354 seals are 24 feet 2 inches wide by 8 feet 9-5/8 inches high. No bolt holes are allowed, and fabrication must follow USACE-provided technical prints to ensure exact fit and function. All completed assemblies must be securely packaged in protective wooden crates and shipped to Clewiston, Florida, without damage during transit. Packaging and shipping instructions are critical to maintain seal integrity, and estimated shipping details are included in the solicitation for vendor quoting. Responses are due by July 31, 2026, at 9 AM EST, with questions to be submitted by July 24, 2026, at the same time. There is no small business or other set-aside for this acquisition, and it is being handled as a commercial items solicitation under FAR Part 12. Contact for inquiries is Kelly Koger, Contract Specialist, and Dustin Furrey, Contracting Officer, both of the U.S. Army Corps of Engineers, Jacksonville District.

General Info

Five dam gate seal sets—three S351, two S354—required with strict rubber specs, PTFE cladding, shipped to Clewiston, FL by July 31, 2026.

Agency

Department Of Defense → W074 Endist JacksnvlleView Agency

NAICS

325212 - Synthetic Rubber ManufacturingView NAICS

Place of Performance

FL, 33440, USA

Set-Aside

NONE

Documents

(5)

Seal Specifications for Structure S-351

DOCX•specifications

RFQ W19EP26QA015 for S351 and S354 Dam Gate Seal Assembly Sets

PDF•rfq

351+Seal+Prints.pdf

PDF

S-354 Seal Specifications for Rubber Seals

DOCX•specifications

Vertical Lift Gates Rubber Seal Detail Drawing

PDF•specifications

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 20

Combined Synopsis

Response DeadlineJul 31

Deadline has passed

Submission Closed

07/31/2026, 01:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W074 Endist Jacksnvlle

Contacts2 people available

OfficeJACKSONVILLE, FL, 32207-0019, USA

Organization / Agency

Department Of Defense → W074 Endist Jacksnvlle

View Agency Profile

Office AddressJACKSONVILLE, FL, 32207-0019, USA

Contacts

Kelly Koger

contact@example.gov

Dustin L. Furrey

contact@example.gov

Full Description

Combined Synopsis/Solicitation for Commercial Items

Subject: S351 and S354 Dam Gate Seal Assembly Sets

Solicitation Number: W19EP26QA015

Classification Code: 5330

NAICS Code: 325212

Agency: U.S. Army Corps of Engineers (USACE), Jacksonville District

1. Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Revolutionary FAR Overhaul (RFO) part 12, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a separate written solicitation will not be issued.

Solicitation number W19EP26QA015 is issued as a request for quotation (RFQ).

There is no set-aside for this acquisition

The U.S. Army Corps of Engineers (USACE), Jacksonville District and Field Offices, has a requirement for:

2. Submission and Contact Information

Detail Information

Questions are due by 24 July 2026 at 9 AM EST

Responses are due by 31 July 2026 at 9AM EST

Points of Contact are:

Contract Specialist: Kelly Koger: kelly.l.koger@usace.army.mil

Contracting Officer: Dustin Furrey: dustin.l.furrey@usace.army.mil

Item

Supplies

Qty

Unit

Price

Total

0001

S351 Seal Set

Each

0002

S354 Seal Set

Each

0003

Estimated Shipping S351

0004

Estimated Shipping S354

Grand Total

Specifications: Five (5) Dam Gate Seal Assembly Sets (three for S351 and two for S354). These items require specialized manufacturing using a specified compound and must be packaged in protective wooden crates for shipment to Clewiston, FL. This request outlines the precise technical specifications, material characteristics, and logistical constraints necessary to ensure proper fabrication and delivery.

Technical Specifications & Material Requirements

Characteristic

Value

Durometer

60-70

Tensile Strength

3000 PSI

Elongation

450% Minimum

300% Modulus

900 PSI

Compression Set

30%

Water Absorption

Low Temp. Brittleness

All Pass – no cracks

S351 Gate Seals (Qty 3):

• Configuration: Rectangular assembly (20ft 9-3/4" W x 8ft H).

• Top/Side Seals: Molded J-Bulb 1-3/4" Dia Bulb x 9/16" Tail x 5-1/8" OAW.

• Bottom Seal: Molded Flat Seal 1" Thk x 4" OAW.

• Features: 1/16" PTFE cladding 180° on Top & Side seals, VOSB molded corners, hot factory vulcanize spliced to size.

S354 Gate Seals (Qty 2):

• Configuration: Rectangular assembly (24ft 2" W x 8ft 9-5/8" H).

• Top/Side Seals: Molded J-Bulb 1-3/4" Dia Bulb x 9/16" Tail x 5" OAW.

• Bottom Seal: Molded Flat Seal 1" Thk x 4" OAW.

• Features: 1/16" PTFE cladding 180° on Top & Side seals, VOSB molded corners, hot factory volcanize spliced to size.

Execution, Packaging & Logistics

• Packaging & Shipping: All finished seals must be securely packed and shipped in wooden crates to prevent damage during transit. The integrity of the seals must be maintained throughout the transportation process.

• Fabrication Constraint: Seals are to be supplied without bolt holes. The vendor must adhere strictly to this constraint to avoid rendering the assemblies unusable upon delivery.

• Reference Prints: USACE will supply detailed drawings/prints to the selected vendor for reference to guarantee accurate molding and splicing.

Delivery Address: 525 Ridgelawn Rd. Clewiston, FL 33440