Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Safety Data Sheet (SDS) Preparation and Compliance

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the preparation and submission of Safety Data Sheets compliant with OSHA regulations for lock washers, with particular attention to products that incorporate hazardous coatings such as cadmium or hexavalent chromium. These SDS documents must accurately detail the chemical composition, potential health and environmental hazards, handling procedures, emergency response measures, and regulatory information to ensure adherence to federal safety standards. Compliance is critical given the toxic nature of the specified substances and the requirement to transmit accurate, up-to-date information to downstream users and regulators. This is a subcontract under the Department of Defense’s Defense Logistics Agency, classified under NAICS code 541690 for other scientific and technical consulting services. The solicitation was posted on July 20, 2026, and the place of performance and specific office details are not provided, but the contractual obligations center on documentation accuracy and regulatory compliance rather than manufacturing or delivery. The work must be executed to meet federal workplace safety mandates, with failure to comply potentially leading to regulatory penalties and disruption of Defense supply chain operations.

General Info

Prepare OSHA-compliant SDS for hazardous-coated lock washers under DOD contract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Prepare and submit OSHA-compliant Safety Data Sheets for lock washers, particularly if hazardous coatings such as cadmium or hexavalent chromium are used.

Similar Contracts

Same NAICS industry code

Emergency Response and On-Call Maintenance SupportThe contract establishes a requirement for on-call emergency response services to address pump station failures, blockages, and storm-related drainage emergencies throughout the performance period. Contractors must be available to rapidly deploy and resolve critical infrastructure issues that could compromise drainage systems, with an emphasis on minimizing disruption and ensuring public safety during adverse weather events. The work is classified under NAICS code 541690, indicating it falls under other scientific and technical consulting services, and is structured as a subcontract under the Texas Department of Transportation. All responses must be submitted by August 11, 2026, and the opportunity was posted on July 20, 2026, with performance expected to take place across the state of Texas.

Texas Department of Transportation

POSTED

about 13 hours ago

DEADLINE

Technical Reporting and Deliverables ProductionThe contract titled Technical Reporting and Deliverables Production requires the preparation and submission of technical reports, design documentation, and engineering deliverables that must fully comply with public records laws and the City of Issaquah’s approval processes. All work must be executed to meet stringent regulatory and procedural standards, ensuring transparency, accessibility, and alignment with municipal requirements for public documentation. The deliverables are expected to support official city operations and may be subject to review, audit, or public disclosure under state and local statutes. This is a subcontract opportunity posted on July 20, 2026, with a response deadline of August 14, 2026, at 11:00 PM. It falls under NAICS code 541690 for other scientific and technical consulting services and is administered by the City of Issaquah in Washington. The place of performance and point of contact details are not specified, but all work is assumed to serve the City’s local infrastructure and planning initiatives. Interested parties must submit proposals by the deadline through the provided public procurement portal.

City of Issaquah

POSTED

about 13 hours ago

DEADLINE

City Wide Water Rights Assessment and Well 4 and 5 Production AssessmentThe City of Issaquah is soliciting proposals for a consulting firm to conduct a comprehensive assessment of its water rights and the production capacity of two critical wells, well 4 and well 5. The project requires expertise in geotechnical, hydraulic, and hydrogeologic engineering to evaluate the current performance of these wells and to analyze the City’s full portfolio of active and inactive water rights. The primary goals are to determine how much water each well can reliably produce under existing conditions and to examine the legal framework surrounding water rights across the entire system. Based on these findings, the City intends to explore options for acquiring new water rights, consolidating existing ones, or repositioning rights to optimize future water supply planning and support the planned expansion of its water system. The solicitation, titled City Wide Water Rights Assessment and Well 4 and 5 Production Assessment with reference number PWE - 8.21.2026, was posted on July 20, 2026, and responses are due by August 6, 2026. The work is to be performed within Washington State, with the City of Issaquah serving as the contracting agency under its public works department. Proposals must be submitted through the specified public procurement portal, and all inquiries should be directed to Matthew Ellis, the primary point of contact, via email or phone. The consulting firm selected will deliver technical analyses and actionable recommendations that will directly inform decisions regarding infrastructure investment, regulatory compliance, and long-term water resource management for the city.

City of Issaquah

POSTED

about 14 hours ago

DEADLINE

Hazard Communication and Labeling ComplianceThe contract requires the preparation and submission of hazard warning labels in full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001, ensuring that all hazardous or regulated materials are properly labeled and documented. This includes the development of accurate and up-to-date Safety Data Sheets (SDS) to meet federal regulatory requirements for chemical safety and information dissemination across the defense supply chain. The work must align with established government standards for hazard classification, labeling elements, and SDS formatting to support safe handling, storage, and transportation of controlled substances. This subcontract is issued under the NAICS code 541690, which pertains to other scientific and technical consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 20, 2026, with a firm response deadline of July 28, 2026. Performance is expected to support military logistics and supply operations, though specific location details are not provided. Participation requires demonstrated expertise in regulatory compliance, hazardous materials management, and the ability to deliver documentation that meets stringent DOD and federal safety mandates without deviation.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

MIL-STD-129 and MIL-STD-130N Compliant Labeling and UID MarkingThe contract requires compliance with MIL-STD-130N for the application of permanent, machine-readable unique item identifiers on equipment and components, ensuring each item is traceable through Data Matrix codes that meet Department of Defense standards. Simultaneously, it mandates adherence to MIL-STD-129 for the labeling of shipping containers, which includes accurate and standardized marking to support logistics and inventory management across the supply chain. All labeling and marking must be integrated with the Web-Based Application for Workflow and Fulfillment system to enable automated data exchange and real-time tracking of materiel from delivery to end use. This work is performed as a subcontract under the Defense Logistics Agency, with the North American Industry Classification System code 541690 indicating it falls under Other Scientific and Technical Consulting Services, and is intended to ensure seamless, standardized identification and documentation across military logistics operations.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA standards for hazard communication regarding pins or packaging that may contain hazardous substances, mandating the provision of Material Safety Data Sheets and appropriate hazard warning labels. All elements of communication must align with federal safety regulations to ensure proper identification and handling of chemical risks associated with the products. The work is governed under NAICS code 541690 and is structured as a subcontract awarded by the ASC Commodities Division of the Department of Defense, with performance expected at a facility in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Interested parties must submit responses by the deadline of July 28, 2026, following the solicitation posted on July 20, 2026, through the DIBBS platform.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract seeks providers to deliver regulatory compliance services specifically tailored to hazardous materials labeling, safety data sheet preparation, and MIL-STD-129 marking for military shipments. These services are critical to ensuring adherence to federal and Department of Defense standards for the safe handling, transport, and identification of hazardous substances within the military supply chain. The contractor will be responsible for accurately documenting and marking hazardous materials to meet mandated regulatory requirements and to support seamless logistics operations across Department of Defense channels. The work is categorized under NAICS code 541690 and is structured as a subcontract with a response deadline of July 27, 2026. Performance is required at FPO, ZIP 09588, which indicates delivery to military postal addresses typically used for overseas or expeditionary locations. The solicitation originated from the Medical Supply Chain FSH under the Department of Defense, emphasizing the importance of precision and compliance in medical and logistical contexts involving hazardous material shipments. All deliverables must align with current Department of Defense and federal transportation regulations to avoid operational delays or safety violations.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract provides hazard warning labels and Material Safety Data Sheets for non-exempt hazardous materials to ensure full compliance with Defense Federal Acquisition Regulation Supplement and Occupational Safety and Health Administration standards. The work supports the Department of Defense’s Defense Logistics Agency by delivering critical safety documentation and labeling required for handling, storing, and transporting hazardous substances across military operations. The contract is classified as a subcontract under NAICS code 541690, indicating it falls within the professional, scientific, and technical services category, specifically for other scientific and technical consulting services. Performance is expected to align with federal safety mandates, and the contract is publicly accessible through the DIBBS portal for award transparency.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Hazardous Material Compliance and Labeling ServicesThe contract for Hazardous Material Compliance and Labeling Services requires the provision of comprehensive hazard identification, safety data sheet preparation, and labeling services aligned with OSHA’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement clause 252.223-7001. This includes thorough analysis to determine exemptions under the Federal Food, Drug, and Cosmetic Act, the Federal Insecticide, Fungicide, and Rodenticide Act, or the Consumer Product Safety Act to ensure regulatory accuracy and compliance. All deliverables must meet federal mandates for chemical safety communication, particularly for materials used within Department of Defense medical supply chains operating at Fort Bragg, North Carolina. The work is structured as a subcontract under NAICS code 541690, indicating it involves other scientific and technical consulting services, and is issued by the Medical Supply Chain MD Surg FSF under the Department of Defense. The solicitation was posted on July 20, 2026, with a firm response deadline of July 27, 2026. Performance is localized at Fort Bragg with a ZIP code of 28310, and all activities must be conducted in full adherence to federal regulations governing hazardous material handling, documentation, and labeling without reliance on external citations or referenced documentation.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThe contract requires comprehensive hazard communication support focused on the preparation of safety data sheets and the development of GHS-compliant labeling for hazardous components used in fasteners. This effort ensures all chemical hazards associated with the materials are properly documented and communicated in alignment with global standards, facilitating safe handling, storage, and transport throughout the supply chain. The work is performed under a subcontract arrangement for the Defense Logistics Agency, a component of the Department of Defense, and falls under the NAICS code 541690 for other scientific and technical consulting services. Performance is tied to federal defense procurement requirements, obligating strict adherence to regulatory frameworks governing hazardous materials without specified geographic restrictions. The contract was posted in July 2026 and is accessible through the DIBBS system under the contract number SPE4A626PX381.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance and ReportingThis contract requires the identification, proper labeling, and timely submission of Safety Data Sheets for all hazardous materials included in deliverables, with specific emphasis on batteries and other dangerous goods. The contractor must ensure full compliance with regulatory standards for hazard communication, maintaining accurate documentation and verifying that all materials are correctly classified, labeled, and accompanied by up-to-date SDS documents prior to delivery. Failure to meet these requirements could result in non-compliance penalties and delivery rejections. The contract falls under the NAICS code 541690 for other scientific and technical consulting services and is issued as a subcontract by the Defense Logistics Agency under the Department of Defense. Although the place of performance and point of contact information are not specified, the work is tied to federal defense supply chain obligations, necessitating strict adherence to safety and reporting protocols. The solicitation was posted in July 2026, indicating this is an active procurement aimed at securing reliable hazardous materials management support for defense-related logistics operations.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Safety Data Sheet (SDS) and Hazard Communication ComplianceThe contract requires the preparation and submission of Safety Data Sheets and hazard labels fully aligned with OSHA Hazard Communication standards and applicable federal regulatory exemptions. This subcontract, issued under the Defense Logistics Agency within the Department of Defense, involves technical support services categorized under NAICS code 541690, which encompasses other scientific and technical consulting services. The work is intended to ensure regulatory compliance for hazardous chemical information across federal operations, requiring precise adherence to labeling requirements and SDS formatting as mandated by federal law. There is no set-aside designation specified, and performance location details are not provided, indicating the work may be performed remotely or at the contractor’s facility. The contract was posted in July 2026 and is linked to a specific solicitation with a defined award and delivery identifier.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

about 18 hours ago

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

about 18 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

about 18 hours ago

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

about 18 hours ago

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 18 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2)The contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect covered defense information, ensuring alignment with the Defense Federal Acquisition Regulation Supplement (DFARS) 252.204-7012. This includes establishing robust cyber incident reporting procedures to meet federal requirements for timely disclosure of security breaches involving sensitive defense data. The work must support compliance at the Cybersecurity Maturity Model Certification Level 2 standard, which demands a structured approach to cybersecurity readiness, documentation, and continuous monitoring across the organization’s information systems. The effort is classified as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code for computer systems design and related services. Performance is expected to be carried out in support of federal defense operations, with no geographic restrictions specified.

Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE