Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SANITIZER, HAND

Active
SPE2DS-26-T-263ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of hand sanitizer labeled as WATERLESS CLEANSER with a 70% ethyl alcohol base, unscented, and packaged in 4 fluid ounce bottles. Each unit of issue is a package containing 24 bottles, and the item is identified by NSN 8520-01-346-9200. A strict shelf-life requirement mandates that the product must have a minimum of 36 months of shelf life from the date of manufacture and no more than five months may have elapsed between manufacture and delivery to the government. The item is classified as a TYPE I (CODE Q) item under RS020, with non-extendable shelf life. Packaging must comply with DLA Packaging Requirements RP001, and technical and quality specifications referenced by R numbers are governed by the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date controlling. The government requires that any non-accepted supplies must have all government identification removed. The solicitation number is SPE2DS-26-T-263Z, posted on July 23, 2026, with responses due by July 29, 2026. The purchasing agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, and delivery must occur at Shaw AFB, SC 29152-5019 within five days of award. The primary point of contact is Mary-Kathryn Donahue, reachable by phone or email as provided.

General Info

Procure 70% ethyl alcohol hand sanitizer, 4 oz bottles, 36-month shelf life, deliver to Shaw AFB within five days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

325611 - Soap and Other Detergent ManufacturingView NAICS

Place of Performance

420 POLIFKA DR BLDG 1042, SHAW AFB, SC, 29152-5019, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-263Z.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Mary-Kathryn Donahue
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SANITIZER,HAND
SANITIZER, HAND
..
WATERLESS CLEANSER; ALCOHOL BASE 70% ETHYL ALCOHOL;
UNSCENTED; 4 FL OZ BOTTLE.
..
UNIT OF ISSUE: PACKAGE (PG) OF 24 EACH
..
RS020: Shelf-life requirement RS001 for a TYPE I (CODE Q) item with a shelf life of 36 months (non-extendable) applies to this item.
SHALL HAVE A SHELF LIFE OF 36 MONTHS. NOT MORE THAN 5 MONTHS SHALL HAVE ELAPSED FROM DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE GOVERNMENT. .. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
ADEQUATE DATA FOR THE NSN/Part Number: 8520-01-346-9200 Quantity: 1 PG Purchase Request: 7017592943QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325611
New
Federal
Biobased Cleaning and Plastics Products SupplyThe contract seeks the supply of biobased cleaning supplies, lubricants, plastic containers, and disposable utensils all certified under the USDA BioPreferred® Program, ensuring products meet federal standards for renewable biological content. This subcontract is designated as a Total Small Business Set-Aside under SBA guidelines, restricting eligibility to small businesses only, and is governed by NAICS code 325611 which pertains to resin and synthetic rubber manufacturing. Performance is required in El Paso, Texas with a delivery zip code of 79903, and responses must be submitted by July 29, 2026 at 2:00 PM Eastern Time. The contract is issued by the Mission Support Contracting Division under the Department of Homeland Security, indicating its use for federal operations requiring environmentally preferable procurement. All items must comply with BioPreferred® certification to validate biobased content claims and meet sustainability requirements.
Mission Support Contracting Division

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 325611
New
SLED
Supply of Fluoride Toothpaste – 9.0 oz (255 g) Units
DOC CORRECTIONS

POSTED

3 days ago

DEADLINE

in 25 days
View Details
NAICS: 325611
New
SLED
Supply of Fluoride Toothpaste – 6.4 oz (181 g) Units
DOC CORRECTIONS

POSTED

3 days ago

DEADLINE

in 25 days
View Details
NAICS: 325611
New
SLED
Supply of Fluoride Toothpaste – 4.2 oz (119 g) Units
DOC CORRECTIONS

POSTED

3 days ago

DEADLINE

in 25 days
View Details
NAICS: 325611
New
DIBBS
Windshield Cleaning Compound SupplyThe contract involves the supply and delivery of a specialized windshield cleaning compound that meets the military specification NSN 6850009262275, ensuring compliance with required military standards for performance and quality. The product must be properly packaged and shipped to Subic Bay, Philippines, with a firm delivery deadline of August 10, 2026. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, and falls under the NAICS code 325611, which corresponds to the manufacturing of cleaning and polishing preparations. The procurement is part of a broader logistical effort to maintain operational readiness by ensuring vehicle maintenance supplies are available at designated overseas locations. All aspects of production, packaging, and shipping must adhere to federal and military protocols to guarantee timely and correct fulfillment without disruption to mission-critical operations.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 325611
New
DIBBS
Supply of Industrial Metal Cleaner (NSN 6850012513289) for DoD DeliveryThe contract requires the procurement and delivery of 13 quarts of industrial metal cleaner identified by NSN 6850012513289 to the USS MAKIN ISLAND (LHD 8) at FPO AP 96672. All deliveries must be completed by August 5, 2026, with shipments rated DPAS for priority handling and delivered via traceable methods that exclude standard parcel post. The supplier must comply with DFARS regulations for invoicing, ensuring accurate and auditable financial documentation. The product falls under NAICS code 325611 and is procured under a subcontract by the Defense Logistics Agency on behalf of the Department of Defense. The delivery location is a military installation, necessitating strict adherence to federal supply chain protocols and timelines.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 325611
New
DIBBS
Supply of Optical Lens Cleaning Compound (NSN 6850002271887)The contract is for the supply of five quarts of a military specification optical lens cleaning compound identified by NSN 6850002271887, requiring proper labeling and delivery FOB destination to a Defense Logistics Agency facility in Tracy, California. The item falls under NAICS code 325611, indicating it pertains to the manufacture of other chemical products, and the transaction is classified as a subcontract under the Department of Defense. The procurement is managed by the Defense Logistics Agency, with the delivery terms ensuring the product arrives at the specified DLA location, placing responsibility for shipping and final delivery on the supplier. The solicitation was posted on July 21, 2026, and the contract is linked to a specific award record in the DIBBS system, indicating it is part of an active acquisition process under a larger military logistics framework.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 325611
New
DIBBS
Calcium Hypochlorite Disinfectant SupplyThe contract entails the supply and delivery of 9,000 units of 5-pound calcium hypochlorite disinfectant, identified by NSN 6840002388115, to Subic Bay in the Philippines. The terms specify FOB origin, meaning responsibility for the goods transfers to the buyer once the product leaves the seller’s facility, and the product must fully comply with military specifications to ensure suitability for its intended use. The contract is classified as a subcontract under the NAICS code 325611, which corresponds to the manufacturing of other inorganic chemical products. The awarding agency is the Defense Logistics Agency under the Department of Defense, indicating this is a military procurement requiring strict adherence to standards and operational requirements. Delivery is scheduled for a future date, with the contract posted on July 21, 2026, and no set-aside provisions are specified, meaning it is open to all eligible contractors regardless of size or status.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 325611
New
DIBBS
Supply of Industrial Solvent Cleaning CompoundThe contract involves the supply and delivery of three units of Cleaning Compound, Solvent with NSN 6850014541310 to Fort Drum, New York, under a delivery order issued against the base contract SPE4AX-16-D-9008. The product is classified under NAICS code 325611, indicating it is related to industrial chemical manufacturing, and the procurement is managed by the Defense Logistics Agency under the Department of Defense. Shipment must be delivered FOB destination, meaning the seller assumes all costs and risks until the goods arrive at the specified location, and must be transported via traceable means to ensure accountability and security throughout transit. This is a subcontract under a federal procurement vehicle, with no set-aside designation specified, suggesting it is open to any qualified vendor. The solicitation was posted on July 21, 2026, and while specific point of contact or detailed addresses are not provided, the delivery destination is clearly identified as Fort Drum, NY. The transaction is tracked through the DIBBS system under contract reference SPE4A626FCXFU and count 264072, ensuring visibility within the defense supply chain. Compliance with FOB destination terms and traceable shipping methods is critical to meeting contractual obligations and facilitating efficient logistics for military operations.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 325611
New
DIBBS
Supply of Calcium Hypochlorite Disinfectant (6 oz. Bottle), NSN 6840002550471The contract entails the procurement and delivery of a single six-ounce bottle of calcium hypochlorite-based disinfectant, specifically compliant with Department of Defense National Stock Number standards under NSN 6840002550471. The item is classified under NAICS code 325611, indicating it falls within the chemical manufacturing sector, and is being sourced as a subcontract under the authority of the Defense Logistics Agency, a component of the Department of Defense. Although the solicitation number and point of contact details are not provided, the contract was posted on July 21, 2026, and the delivery point is not explicitly defined beyond the agency oversight. The transaction is governed by DLA’s established unit of issue protocols, ensuring standardization across military supply channels. The official record and award documentation are accessible via the DIBBS platform, linking directly to the contract award details for verification and tracking purposes.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 325611
New
DIBBS
High-pH Detergent Supply for Government UseThe contract involves the procurement and delivery of nine cases of high-pH detergent with NSN 6850015774198 to Subic Bay, Philippines, for government use under the Defense Logistics Agency. The supplier must comply fully with DLA’s stringent packaging, labeling, and shipment standards, ensuring the product meets all military and logistical requirements for safe and traceable transport. This is a subcontract issued under a broader DLA initiative, classified under NAICS code 325611 for industrial chemical manufacturing, and is intended to support operational needs in the Pacific region. Delivery is scheduled to meet DLA’s strict timeline and documentation protocols, with all shipments required to be properly identified and tracked under DLA’s centralized system. The contract does not specify a solicitation number or set-aside details, indicating it was awarded through an existing framework or direct channel. The place of performance is confirmed as Subic Bay, Philippines, and the work falls under the Department of Defense’s supply chain infrastructure. All items must be received in approved condition and fully compliant with federal and agency-specific regulations governing hazardous or specialized chemical materials.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 325611
New
DIBBS
Supply of Aircraft Surface Cleaning CompoundThe contract entails the manufacture or supply of six units of a military-spec aircraft surface cleaning compound designated by NSN 6850-01-439-6842, ensuring full compliance with federal and military standards for performance, safety, and quality. The product must be properly packaged and labeled in accordance with government requirements to facilitate seamless acceptance and integration into defense logistics systems. Delivery is obligated to meet strict timelines and procedural guidelines set by the contracting authority to ensure operational readiness and compliance with Department of Defense protocols. This subcontract is issued under the NAICS code 325611, which classifies the industry as chemical and allied products manufacturing, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The award is linked to a larger procurement mechanism, with the contract reference numbers indicating its integration into an existing supply chain framework. Although specific delivery locations and contact information are not provided, the performance and acceptance criteria are governed entirely by federal military specifications, and the product must arrive in a condition suitable for immediate use by authorized military or support personnel without further processing or inspection.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 334511
New
DIBBS
BLOOD RECIPIENT SETThe blood recipient set is a sterile, disposable indirect transfusion device with a standard blood filter ranging from 170 to 260 microns, a male luer lock adapter, and a Y-type blood/solution set measuring 98 inches overall, designed for precise fluid delivery at 10 drops per milliliter. Each unit is packed in quantities of 48 per box, adhering strictly to commercial packaging standards and the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951 and MIL-STD-129. Packaging must ensure protection against damage, meet medical marking standard No. 1, and be palletized per DLA procurement guidelines, with all items marked and labeled accordingly for traceability and compliance. The product is manufactured by Baxter Healthcare Corporation under part number 2C6720 and is identified by NSN 6515-01-462-5563. The contract specifies delivery within five days FOB destination with zero quantity variance, inspection and acceptance occurring at the delivery point. Two separate delivery lines are listed, each requiring shipment to different Fort Bragg locations in North Carolina via the fastest traceable means, prohibiting parcel post. Delivery deadlines are set for July 17, 2026, and July 27, 2026, with specific freight shipping addresses and contact details for each recipient unit. Government use identifiers, project codes, and tracking data are included for internal logistics administration, and all documentation must align with DoD authorized units of issue. The solicitation, issued under SPE2DS-26-T-268R, was posted July 23, 2026, with responses due by July 29, 2026, and falls under NAICS code 334511 for medical device manufacturing, procured by the Department of Defense’s Medical Supply Chain for surgical and field support operations.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
SENSOR, OXYGEN MONITORIThe contract involves the procurement of three oxygen monitoring sensors with plastic housings and electrical cells, designated by NSN 6515-01-318-1535, for delivery within 84 days to APO 96260-5479. Each unit must be individually sealed in a protective container to prevent damage and shipped in commercial exterior packaging suitable for safe transport via common carrier at the lowest cost. Packaging and marking must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and all items must be properly identified in accordance with this standard. The sensors have a non-extendable shelf life of 96 months and are classified as a Type I (Code U) item under RS026 requirements. The solicitation incorporates applicable technical and quality standards from the DLA Master List, and suppliers must provide the source and part number being offered. The contract is subject to covered defense information protocols under RD003 and requires removal of government identification from non-accepted supplies per RQ011. Packaging must adhere to DLA requirements as outlined in section B of SPE2DS-26-T-262T, and all bids must be submitted by the response deadline of July 29, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
TEST STRIPS AND COLORThe contract specifies the procurement of urine test strips and color charts capable of detecting bilirubin, blood, glucose, ketone, leukocytes, nitrite, pH, protein, specific gravity, and urobilinogen, each packaged in bottles of 100 strips per unit, with a total quantity of two units required. The items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements and are subject to medical packaging standards, including compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must ensure protection against damage and safe delivery via common carriers at the lowest cost, with all labels clearly displaying the date of manufacture, expiration date, contract number, and lot number in accordance with MMS1C guidelines. A shelf-life requirement of 18 months is mandatory and non-extendable, with no more than two months allowed to have elapsed between the date of manufacture and the date of delivery to the government. The items are classified as a TYPE I (CODE K) item under the shelf-life specification, and all labeling must conform to the latest revision of MMS1C. The solicitation number is SPE2DS-26-T-263E, issued on July 23, 2026, with responses due by July 29, 2026, and delivery required within five days of award. The contracting office is under the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue designated as the primary point of contact. The NSN is 6550-01-221-5400, and the NAICS code is 325412, identifying the industry as medical and surgical instrument manufacturing.
Pharmaceutical Preparation Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLEThe contract specifies the procurement of disposable applicators with an overall maximum length of 4.000 inches and a nominal shaft diameter of 0.200 inches, featuring a round tip and either rayon or cotton head impregnated with povidone-iodine. Each unit must be individually sealed in a suitable container to prevent damage or breakage and packed in commercial shipping containers that ensure safe delivery via common carrier at the lowest cost to the designated destination. All items must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and markings must adhere to the latest edition of this standard available through DLA Troop Support. The unit of issue is a package (PG) containing 75 units, and packaging must meet MIL-STD-2073-1E requirements. The item is regulated by the FDA under Class I, with regulation 880.6025, and while a 510(k) is not required, compliance with registration, listing, labeling, and GMPs is mandatory. The contract mandates no substitutions and requires bidders to provide the source and part number, with approved suppliers including Cardinal Health 200, LLC, Medline Industries, LP, and NICE-PAK Products Inc. Delivery is FOB destination within 20 days, with zero variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The NSN is 6515-01-316-9295, and the solicitation number is SPE2DS-26-T-266C, with a response deadline of July 29, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
SPLINT, LEGThe contract is for a three-panel knee immobilizer splint, designed for post-operative immobilization of injured knees, with a universal left or right fit suitable for most patients. It features polyurethane foam and mesh side panels with trimmable design, contoured stays, and five hook-and-pile closures for secure fit, accommodating thigh circumferences up to 32 inches and a standard length of 24 inches. The product includes a closed patella design and is issued as a single unit. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date, depending on acquisition size. Packaging must meet DLA standards, and non-accepted supplies must have government identification removed. Bidders must clearly state the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-265B, has a response deadline of July 29, 2026, with performance delivery expected within 20 days after order. The contracting office is the Department of Defense, Medical Supply Chain, located at Fort Bliss, Texas, with James Burke as the primary point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
MASK, ORONASALThe contract specifies the procurement of a single adult oronasal resuscitator mask with a latex-free blue cuff, identified by NSN 6515-01-036-9070 and part numbers from approved manufacturers including AMBU INC, CARDINAL HEALTH, and MEDLINE INDUSTRIES. The unit of issue is each, with a quantity of one, and delivery is required within 20 days FOB destination to Fort Bliss, Texas. All packaging must comply with DLA Packaging Requirements, ASTM D3951, and the Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring each unit is sealed in a protective container and shipped in commercial exterior packaging suitable for safe carrier delivery at the lowest rate. Markings on all containers must include the MFD prefix followed by the lot and manufacture date, along with NSN, manufacturer, CAGE code, contract number, and expiration or retest date. The product is FDA-regulated and requires pre-award referral via EBS for confirmation. Shipping must be traceable and cannot use parcel post, with all shipments directed to the specified Fort Bliss delivery point. The contract is governed by DLA’s Master List of Technical and Quality Requirements, and the solicitation is issued under SPE2DS-26-T-268G with a response deadline of July 29, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, INTRAOSSEOUSThe contract specifies the procurement of intraosseous needles, specifically the EZ-IO Needle and Stabilizer Kit, identified by NSN 6515-01-648-7346, with a quantity of four units. Each unit includes a 15 gauge 25 mm needle, an EZ-stabilizer dressing, an EZ-connect IV extension set, a needleVISE-1 port, and a patient wristband. The items must have a shelf life of 48 months, with no more than seven months elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with commercial standards, ensuring each unit is sealed in a protective container and shipped in suitable exterior packaging that ensures safe delivery at the lowest cost to the designated point of delivery. All items must be labeled with the NSN, manufacturer and CAGE code, manufacturing and expiration dates, and contract or lot number. Marking must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-265X, requires delivery within 20 days after award and is subject to the DLA Master List of Technical and Quality Requirements, with compliance mandatory for all technical and quality specifications referenced by R or I numbers. The contracting office is the Department of Defense’s Medical Supply Chain, with the place of performance listed as FPO, 96694, and points of contact provided for inquiries.
Surgical and Medical Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
DRAINAGE KIT, CLOSED SUThe contract is for the procurement of 3 pack units of a closed suction Jackson-Pratt drainage kit, each containing 10 disposable drainage units with a 100 mL reservoir and a radiopaque 97.5 cm long, 10 mm wide drain tube. The item is manufactured by Cardinal Health 200, LLC under part number SU130-1361 and is classified as a Class I medical device regulated by the FDA, requiring compliance with registration, listing, labeling, and good manufacturing practices. The product has a non-extendable shelf life of 60 months and must be packaged and marked in strict accordance with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129. Each unit must be sealed in a protective container and shipped in commercial exterior containers ensuring safe delivery at the lowest cost to the destination. Delivery is required FOB destination within 20 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The shipment must be traceable, excluding parcel post, and delivered to Fort Bragg, North Carolina. The NSN is 6515-01-341-4523, and the purchase request number is 7017584396. The contract, issued under SPE2DS-26-T-262V, is part of a federal acquisition governed by DLA technical and quality requirements, with all packaging, marking, and logistical instructions aligned with DLA standards for medical acquisitions.
Surgical and Medical Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLEThe contract specifies the procurement of 100 disposable povidone-iodine applicator swab sticks, packaged in two units of issue, each containing 50 applicators. Each unit must be individually sealed in a protective container to prevent damage or breakage, and all units must be packed in commercial shipping containers suitable for safe delivery via common carrier to the designated point of performance in APO, ZIP 96319-5024, at the lowest possible shipping cost. The product must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all labeling must include the manufacturer’s date, expiration or retest date, and the contract or lot number, following the latest revision of MMS1A. The product must have a minimum shelf life of 15 months, with no more than two months having elapsed between the manufacturer’s date and delivery to the government. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable specifications identified by R or I numbers. The solicitation, issued under contract number SPE2DS-26-T-265P, requires bidders to disclose the source and part number being supplied, and responses are due by July 29, 2026, with delivery due within 20 days after award.
Surgical Appliance and Supplies Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
PENCIL, ELECTRODE, ELECTThe contract specifies the procurement of a sterile, disposable electrosurgical pencil electrode designed for use with the CONMED System 5000, featuring a polytetrafluoroethylene handle, latex-free construction, a push-button switch, a 1-inch ultraclean blade, and a 10-foot cable. Each unit is packaged in a sealed container to protect against damage and must be shipped in commercial exterior containers suitable for safe delivery at the lowest cost to Fort Bragg, North Carolina. The product must have a 60-month shelf life, with no more than nine months elapsed between manufacture and government delivery. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and labels must include the NSN 6515-01-575-6486, manufacturer and CAGE code, date of manufacture or expiration, and contract or lot number. The unit of issue is a package of 40 units, and bidders must clearly identify the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-264A, requires compliance with DLA’s Technical and Quality Requirements, includes provisions for handling covered defense information, and mandates removal of government identification from non-accepted supplies. The contract was posted on July 23, 2026, with a response deadline of July 29, 2026, and delivery is required within five days of award.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 322211
New
DIBBS
ADHESIVE TAPE, SURGICALThe contract specifies the procurement of surgical adhesive tape measuring 6 inches wide by 10 yards long, packaged in units of 12 rolls per package, for a total quantity of three packages. The product must be Medipore brand and comply with stringent shelf-life requirements, including a mandatory 60-month shelf life from the date of manufacture, with no more than 51 months having elapsed between manufacturing and delivery to the government. All labeling must conform to the latest revision of MMS1A and clearly display the manufacturer’s date, expiration or retest date, and the contract and lot numbers. The item is governed by multiple technical and quality requirements, including RS023 for non-extendable shelf-life control, RD003 for potential covered defense information, RP001 for DLA packaging standards, and RQ011 regarding removal of government identification from non-accepted supplies. Bidders are required to provide the specific source and part number being supplied, and the procurement is linked to NSN 6510-01-588-1947 under solicitation SPE2DS-26-T-263F, with a response deadline of July 29, 2026, and a delivery requirement within five days of award to Fort Bragg, North Carolina. The contract falls under NAICS code 322211 and is managed by the Department of Defense’s Medical Supply Chain.
Corrugated and Solid Fiber Box Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
CUTTER, LINDEMANNThe contract specifies the procurement of five disposable 12 mm Lindemann Cutter II HI-LINE XS instruments under solicitation SPE2DS-26-T-264S, with a unit price of $5.00 and a total value of $25.00. The item is classified under NSN 6515-01-549-6161 and is regulated by the FDA, requiring the contracting official to refer the bid to a product specialist for confirmation, including details on the bidder, manufacturer, part number, and description. The equipment must be supplied with clear source and part number identification, with eligible manufacturers including Aesculap, Inc. and Trillamed LLC. All packaging must comply with commercial standards as specified in the procurement document, ensuring sealed unit containers protect against damage and shipping containers enable safe, cost-effective delivery to the destination. Medical Marking Standard No. 1 replaces MIL-STD-129 as the governing marking requirement, and copies must be obtained directly from DLA Troop Support or via the DLA website. Delivery is required within 20 days FOB destination to the USNS COMFORT, FPO AE 09566-4008, with no variance allowed in quantity. The contract requires palletization per DLA packaging guidelines and references specific logistics protocols for transportation and shipping. The response deadline is July 29, 2026, with an original required delivery date of July 22, 2026, and technical and quality requirements are incorporated by reference from the DLA Master List.
Surgical and Medical Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details