Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Santa Cruz Laboratory Facility Repairs and Replace

Active

1305M326Q0066Federal

Response Deadline08/10/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves repairs and replacement work at the Santa Cruz Laboratory Facility under solicitation number 1305M326Q0066, issued by the National Oceanic and Atmospheric Administration through the Department of Commerce’s Seattle office. The solicitation was posted on July 24, 2026, with a response deadline of August 10, 2026, at 4:00 PM Pacific Time. The work falls under NAICS code 236220, categorizing it as commercial and institutional building construction, and is intended for federal execution. Contracting Officer Rachel Stone is the designated point of contact, reachable via email at rachel.stone@noaa.gov, and all correspondence and submissions must be directed through the FedConnect portal listed in the solicitation. The place of performance is the Santa Cruz Laboratory Facility, though the specific address details are not provided in the contract data, applicants are expected to confirm site access and requirements independently. The solicitation does not specify a set-aside designation, meaning it is open to all eligible contractors without restrictions based on small business size or other categories.

General Info

Repairs and replacement at Santa Cruz Laboratory under NOAA solicitation, deadline August 10, 2026, FedConnect submissions only.

Agency

Department Of Commerce → WAD-NMFS-SeattleView Agency

NAICS

236220 - Commercial and Institutional Building ConstructionView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(3)

Site Visit Sign-in Sheet for RFQ 1305M326Q0066

PDF•site-visit-sign-in-sheet

Solicitation 1305M326Q0066 for SWFSC Santa Cruz Laboratory Facility Repairs

PDF•ifb

DBA Wage Determination CA20260018

PDF•wage-determination

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation

PostedJul 24

Solicitation

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 04:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Commerce → WAD-NMFS-Seattle

Contacts1 person available

OfficeSEATTLE, WA, 98115, US

Organization / Agency

Department Of Commerce → WAD-NMFS-Seattle

View Agency Profile

Office AddressSEATTLE, WA, 98115, US

Contacts

Rachel StoneContracting Officer

contact@example.gov

Full Description

Show more

Santa Cruz Laboratory Facility Repairs and Replacement

Similar Contracts

Same NAICS industry code

Checkpoint Security Grill Replacement - DBBThe contract seeks a contractor to deliver comprehensive design, permitting, and construction services for replacing the Checkpoint 5 security grill at the Port of Seattle. The scope encompasses a full lifecycle approach beginning with site assessment and continuing through the preparation of design drawings and specifications that comply with TSA CRPG Section 3-5 standards. The contractor must submit all documentation for regulatory review and secure necessary permits, followed by the safe removal and proper disposal of the existing grill. New system fabrication and installation are required, with seamless integration into existing structural, electrical, and security badge access systems. All work must be conducted with strict attention to operational continuity, minimizing disruption to airport security functions. Coordination with multiple stakeholders is mandatory to ensure compliance with federal, state, and local regulations while maintaining the integrity of the airport’s security posture. The procurement is classified under NAICS code 236220 for commercial and institutional building construction and is managed by the Aviation Project Management Group under the Port of Seattle. Primary contact for inquiries is Yanet Maldonado, with Collette Deardorff serving as the project manager. The opportunity was posted on July 26, 2026, and the contract is structured under a design-bid-build delivery method. All work must be performed at the port’s facility, with no specified set-aside provisions. Contractors are expected to engage proactively with project representatives to align on timeline, quality, and compliance requirements throughout all phases of the project.

Aviation Project Management Group

POSTED

about 5 hours ago

DEADLINE

Rental Car Facility (RCF) Customer Service Building (CSB) Re-DemisingThe Port of Seattle’s Aviation Project Management Group is preparing to revise the base building infrastructure of the Rental Car Facility Customer Service Building to support a new Concession Agreement and enable tenant construction commencing June 1, 2027. The scope includes updating wayfinding signage to reflect new tenant locations, constructing a new break room and flex space for transit operations, renovating existing restrooms in the Customer Service Building, replacing outdated car wash equipment in the Quick Turn Around areas, installing new expansion joints on the 5th Floor plaza areas, and performing structural repairs to address cracking and repair post-tensioned cables. These upgrades are designed to modernize facility functionality and ensure compliance with future operational demands under the upcoming concession arrangement. All work is centered on the Customer Service Building within the Rental Car Facility, with the Port of Seattle acting as the contracting authority. The solicitation is currently forecasted, with no formal solicitation number assigned yet, and the NAICS code 236220 indicates commercial and institutional building construction. Primary point of contact is Angela Peterson, with Julia Ruzon serving as Project Manager. Interested parties should monitor the official Port of Seattle portal for formal solicitation release, as this project represents a significant capital improvement initiative aimed at enhancing tenant experience and long-term facility integrity.

Aviation Project Management Group

POSTED

about 5 hours ago

DEADLINE

General Contracting & Construction ManagementThe contract entails comprehensive general contracting and construction management services with a focus on overall project oversight, subcontractor coordination, scheduling, and strict adherence to NYSDOT standards and all contractual documentation requirements. The scope demands a high level of administrative and operational control to ensure timely delivery, regulatory compliance, and seamless integration of multiple trade partners throughout the project lifecycle. This is a subcontract opportunity under NAICS code 236220, with a response deadline of August 27, 2026, and is associated with the New York agency under the Engineering division. All work must conform to New York State Department of Transportation protocols and documentation guidelines, requiring experienced firms capable of managing complex construction environments with precision and accountability. The place of performance and specific project location are not detailed in the posted data, but performance is expected to align with NYSDOT’s jurisdictional requirements. Access to additional details is available through the provided UI link.

POSTED

about 9 hours ago

DEADLINE

in about 1 month

BID SCSD Syracuse ITC Stadium ProjectThe BID SCSD Syracuse ITC Stadium Project solicitation, identified by number 27-070, invites qualified contractors to submit proposals for five distinct trade contracts: General Contractor, Plumbing Contractor, Mechanical Contractor, Electrical Contractor, and Site Contractor. The solicitation was posted on July 26, 2026, with a firm deadline for responses set for August 27, 2026, at 6:30 PM. This project is managed by the New York State and Local Government entity through its Engineering department based in Syracuse, NY, with a zip code of 13202, and all work is to be performed locally in New York. The project does not specify a set-aside classification or NAICS code, indicating it is open to broad contractor participation without reserved status. Primary point of contact is Ahmad Sarwari, Civil Engineer I, reachable at 609-621-6790 or asarwari@syr.gov, with secondary support provided by Laura Padgett, Assistant Director of Purchase, at 315-448-8286 or lpadgett@syr.gov. Further details and submission guidelines can be accessed via the online portal at https://procurement.opengov.com/portal/syrgov/projects/286977.

POSTED

about 9 hours ago

DEADLINE

in about 1 month

1771 Roofing ReplacementOnly roofing contractors listed on the General Requirements cover page are eligible to submit proposals for the 1771 Roofing Replacement project at Camp Lejeune, North Carolina. The solicitation, numbered N4008526R9067, is a total small business set-aside under NAICS code 236220 and is open exclusively to small businesses as defined by the SBA. Proposals must be submitted by August 26, 2026, at 7:00 PM EST, with the opportunity posted on July 26, 2026. The project is managed by the Navy Facilities Engineering Systems Command Mid-Atlantic based in Norfolk, Virginia, and detailed scope of work and applicable drawings are provided in the attached documents. All inquiries should be directed to the primary point of contact, Clifton Gaither, at 910-378-6452 or clifton.l.gaither.civ@us.navy.mil, with Lauren F. Padden as the secondary contact.

Navfacsyscom Mid-Atlantic

POSTED

about 10 hours ago

DEADLINE

in about 1 month

RFQ 19KU2026Q0013 - AEWA Door & Tile Installation Upgrade projectThe RFQ 19KU2026Q0013 seeks qualified contractors to perform the AEWA Door & Tile Installation Upgrade project at the U.S. Embassy in Kuwait under a fixed-price contract award, with selection based on the lowest technically acceptable bid. A mandatory site visit is scheduled for August 5, 2026, at 09:30 AM Kuwait time, and failure to conduct a thorough on-site assessment prior to submission renders the contractor fully responsible for any errors, omissions, or cost miscalculations in the proposal, including the Bill of Materials and Bill of Quantities. All quotations must be submitted electronically by August 16, 2026, at 10:00 AM Kuwait local time, with emails titled correctly to ensure proper processing. Proposals must include the completed SF-1442 form, pricing in Section A, all required representations and certifications in Section L, and supporting documentation from Attachment A and other applicable sections. Offerors must either hold an active SAM registration and provide their Unique Entity Identifier or, if not registered, complete FAR 52.204-90, with the requirement to update this annually if option periods are exercised. Questions must be submitted by August 8, 2026, at 10:00 AM Kuwait time; no inquiries will be accepted after this deadline. The project falls under NAICS code 236220 and is administered by the U.S. Department of State through the Embassy in Kuwait, with no set-aside provisions applied.

US Embassy Kuwait

POSTED

about 10 hours ago

DEADLINE

Contract for Internal Renovation Works (Phase 1)The Ministry of Water, Environment and Climate Change is seeking bids for Phase 1 of internal renovation and reconfiguration works at its Head Office located at 16A Half Way Tree Road, Kingston 5. This phase focuses on priority improvements intended to address immediate operational needs and initiate a broader reconfiguration of the facility to enhance staff accommodation, functionality, circulation, safety, and the overall working environment. The project is part of the Ministry’s larger infrastructure improvement initiative, with Phase 1 designed to lay the foundation for subsequent stages by upgrading critical areas that directly impact daily operations and employee well-being. The solicitation, numbered 15324/8, was posted on July 25, 2026, with proposals due by August 17, 2026. The procurement is being conducted by the Government of Jamaica through the Ministry, and the works are to be performed exclusively at the specified Kingston location. There is no set-aside designation specified for this contract, and all interested parties must respond through the official electronic procurement portal prior to the deadline.

Ministry of Water Environment and Climate Change

POSTED

DEADLINE

Matsushima JASDF Base Storage ShelterThe 356th ETSG Contracting Office is seeking industry interest in a design-build project for a storage shelter at Matsushima JASDF Base in Higashimatsushima, Miyagi Prefecture, Japan, with a preliminary budget range of $1 million to $5 million. This sources-sought notice is not a formal solicitation but serves to evaluate potential contractor availability and capability prior to any official release. A mandatory pre-solicitation site visit is scheduled for 5 August 2026 at 0900 JST at Woody Golf Square Yamoto in Yamoto, Higashimatsushima, and all participants must submit an attendee list including full names, driver’s license copies, and vehicle details by 30 July 2026 at 0900 JST to the designated point of contact emails. If the government proceeds with a formal solicitation, it will be issued on SAM no later than 12 August 2026 with updated Statement of Work documents, and no additional site visits will be conducted. Questions must be directed to the listed POCs, with responses provided within two business days and published on SAM where applicable. The NAICS code for this effort is 236220, and the opportunity carries no set-aside designation.

FA5025 356 Eceg Pk

POSTED

DEADLINE

Z2DA--FY27 NRM | 557-23-104 | Replace Boiler Plant Steam Boilers | Construction (VA-27-00003633)The Department of Veterans Affairs, through Network Contracting Office 07, is conducting market research for the replacement of three steam boilers at Building 27 of the Carl Vinson VA Medical Center in Dublin, Georgia. This project, classified under NAICS code 236220 with a magnitude between $20 million and $50 million, will require a contractor to manage and execute the full scope of construction work including hazardous material abatement, demolition of existing systems, installation of new boilers, piping, fuel tanks, emergency generators, and related site work—all in accordance with design drawings and specifications provided by an independent Architect-Engineer. The work must comply with all federal, state, and local regulations, and wage determinations for Laurens County, Georgia will apply. The project is anticipated to be awarded as a firm-fixed-price contract following a competitive process, either through an RFP under FAR Part 15 or an IFB under FAR Part 14, with the final procurement method to be determined after market research. The performance period is set at 730 days from the Notice to Proceed, and the contract is planned to be set aside exclusively for Service-Disabled Veteran Owned Small Businesses. Interested contractors must submit a capabilities statement no longer than four single-spaced pages in a single PDF under 4MB, including company details, UEI, size certification under NAICS 236220, bonding capacity sufficient for the project value, and evidence of past performance on at least three comparable medical facility construction projects completed within the last seven years. Submissions must include specific project names, owners, contact information, dollar values, start and completion dates, and a description of technical expertise and key personnel relevant to the scope. Responses must be emailed as a properly formatted PDF by August 7, 2026, at 3:00 PM EST to the designated VA contacts with the correct subject line reference. No bids or proposals are being solicited at this time; this is purely a market research effort, and respondents should not expect evaluation feedback, reimbursement, or a solicitation unless posted on SAM.gov in the first quarter of FY27. Hard copies and phone inquiries are not accepted, and compliance with submission guidelines is mandatory for consideration.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

RFP-NCS-260000002404-1 | BP5 HS INNOVATION HUB SUPERSTRUCTUREThe contract solicitation RFP-NCS-260000002404-1 for the BP5 HS INNOVATION HUB SUPERSTRUCTURE is issued by Novi Community Schools in Michigan under the state-local education agency category, seeking proposals for the construction of a superstructure supporting an innovation hub at the high school level. The solicitation was posted on July 25, 2026, with a response deadline of August 11, 2026, at 4:00 PM Eastern Time, and is open to qualified contractors ready to deliver construction services in compliance with specified technical and administrative requirements. The place of performance is in Michigan, with no specific city or zip code provided, indicating the work will occur at the Novi Community Schools campus. Primary point of contact for inquiries is Sandra Brasil, reachable via phone at 248-449-1218 or email at sandra.brasil@novik12.org, with secondary contact also listed under the school district name. No NAICS code or set-aside classification is provided, suggesting the opportunity is open to all eligible bidders without preference for small businesses or other designated categories. The official portal for submissions and additional details is accessible through the Michigan State Procurement platform, where interested parties may review full requirements and submit proposals prior to the deadline.

Novi Community Schools

POSTED

DEADLINE

General Construction / Renovation ContractorThe contract involves the on-site execution of demolition, framing, drywall, painting, and ceiling work to complete a study room build-out within an occupied academic facility at Texas Southern University. All work must be performed in a live campus environment, requiring strict adherence to safety protocols, noise control, dust mitigation, and scheduling to minimize disruption to ongoing academic activities. The contractor is expected to coordinate closely with university staff to ensure compliance with institutional policies and maintain a fully functional learning space throughout the project. This is a subcontract under NAICS code 236220 for construction of educational facilities, with a response deadline of August 18, 2026. The solicitation was posted on July 24, 2026, and the work will take place at Texas Southern University’s campus, though exact location details are not specified. No set-aside type or agency-specific requirements are indicated, and the contract is accessible via the Texas SmartBuy portal. Bidders must demonstrate experience in renovating active academic environments and managing high-traffic, sensitive operational areas during construction.

Texas Southern University

POSTED

DEADLINE

T-Hangar Construction Planning and Site DevelopmentThe contract involves comprehensive site planning, civil design, and permitting support for the construction of T-hangars, with a focus on essential infrastructure elements including utility connections, access roads, and stormwater management systems. All work must align with local regulations and engineering standards to ensure functional, safe, and sustainable development of the facility. The project is categorized under NAICS code 236220, indicating its classification within commercial and institutional building construction, and is structured as a subcontract opportunity. The solicitation was posted on July 24, 2026, with a response deadline of August 13, 2026, and is being managed by the City of Swainsboro in the state of Georgia. While specific performance location details are not provided, the project site is expected to be within the city's jurisdiction. There is no set-aside designation indicated, and the contract does not include contact information for inquiries, though the official UI link is available for additional details through the Georgia Department of Administrative Services system.

City of Swainsboro

POSTED

DEADLINE

More opportunities from Department Of Commerce → WAD-NMFS-Seattle

Same awarding agency

Technical Documentation & As-Built DrawingsThe contract requires the preparation of comprehensive operations and maintenance manuals, as-built drawings in multiple formats including hard copy, PDF, and AutoCAD, along with complete warranty documentation adhering to federal standards. All deliverables must meet rigorous technical specifications to ensure long-term usability, compliance, and accessibility for federal stakeholders. The work is scoped under NAICS code 541490 and is categorized as a subcontract, indicating it supports a larger prime contracting effort under the Department of Commerce, specifically managed by WAD-NMFS-Seattle. Proposals must be submitted by August 10, 2026, with the solicitation posted on July 24, 2026, leaving a competitive window of approximately three weeks for qualified vendors to respond. Although specific location details for performance or contact information are not provided, the work is presumed to support federal infrastructure or facilities under the agency’s jurisdiction, likely involving marine or fisheries-related operations. All documentation must be delivered in accordance with federal requirements, emphasizing precision, formatting consistency, and regulatory alignment to ensure successful acceptance and implementation.

Other Specialized Design Services

POSTED

DEADLINE

Corrosion-Resistant Materials & Equipment SupplyThe contract requires the supply of marine-grade, corrosion-resistant exhaust fans, ductwork, fasteners, and associated electrical components, all of which must meet Buy American Act standards to ensure domestic sourcing and manufacturing. The equipment is intended for use in marine environments where exposure to saltwater and humidity demands materials with heightened durability and resistance to degradation. All items must be fully compliant with industry specifications for performance and longevity under harsh coastal or offshore conditions, and the supplier is expected to deliver complete, ready-to-install systems without requiring additional modifications. The solicitation is categorized as a subcontract under NAICS code 333415, which corresponds to the manufacturing of industrial and commercial fan and blower equipment. The opportunity was posted on July 24, 2026, with a deadline for responses set for August 10, 2026, at 4:00 PM. The contracting activity is tied to the National Marine Fisheries Service under the U.S. Department of Commerce in Seattle, indicating the end-use is likely within federal marine facilities, research stations, or vessels. While specific performance locations and point of contact details are not provided, interested parties must ensure full adherence to U.S. content and manufacturing requirements and submit proposals prior to the stated deadline via the FedConnect portal.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Electrical Integration & Power SystemsThe contract encompasses the electrical installation of new exhaust fans with full integration of conduit systems, disconnect controls, and grounding infrastructure to support 480V, 3-phase power systems. All work must adhere strictly to the safety and performance standards outlined in NFPA 70 and NFPA 110, ensuring compliance with national electrical code requirements and emergency power system protocols. The installation is part of a broader electrical integration effort for a federal facility operated by the Department of Commerce’s WAD-NMFS-Seattle office, with performance expected to meet rigorous technical and regulatory benchmarks for industrial electrical systems. This subcontract, posted on July 24, 2026, is classified under NAICS code 238210 for electrical contracting and requires proposals to be submitted by August 10, 2026. The work is to be performed at an unspecified location within the agency’s operational jurisdiction, with all materials and labor expected to satisfy federal procurement standards. While no set-aside provisions are specified, bidders must demonstrate proven experience with high-voltage commercial and industrial installations, particularly those involving exhaust ventilation systems compliant with NFPA standards. All aspects of the project, from design to commissioning, must ensure seamless integration with existing power infrastructure and maintain uninterrupted operational continuity.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Exhaust Fan Removal & Installation (HVAC)The contract calls for the removal and installation of AXCL 1225 exhaust fans rated at 1HP, 480V, and 3-phase on the laboratory roof, with all work performed in a marine environment requiring corrosion resistance and durability. The scope includes full rigging operations, vibration isolation to minimize structural transmission, and seamless integration with existing ductwork systems to ensure proper airflow and compliance with environmental controls. All work must adhere to stringent standards for safety, performance, and longevity under high-salt, high-humidity conditions typical of coastal marine settings. The solicitation is classified as a subcontract under NAICS code 238220 for HVAC installation, with a response deadline of August 10, 2026, and a posted date of July 24, 2026. The contracting agency is the Department of Commerce through its WAD-NMFS-Seattle office, though specific location details are not provided. The project requires experienced contractors familiar with marine-grade HVAC systems and laboratory environmental requirements, with all materials and methods selected to ensure operational reliability and minimal maintenance over time.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Laboratory Fume Hood System Assessment & CommissioningThe contract entails the comprehensive assessment, performance testing, and commissioning of fume hood systems across laboratory facilities to ensure each unit maintains a face velocity of exactly 100 feet per minute, in full compliance with the industry standards set by ASHRAE 110 and ANSI/AIHA Z9.5. This work is critical to verifying the safety and efficiency of ventilation controls within laboratory environments, ensuring proper containment of hazardous substances and protecting personnel health. All activities must adhere strictly to the specified performance benchmarks and documented testing protocols outlined in the referenced standards. The solicitation is for a subcontract under the Department of Commerce through its WAD-NMFS-Seattle office, with a posted date of July 24, 2026, and a response deadline of August 10, 2026. The work is governed by NAICS code 541330, indicating it falls under engineering services, and does not specify a set-aside classification. The place of performance details are not provided, but the scope is clearly defined by the technical requirements. Contractors must be prepared to deliver detailed reporting on compliance validation, with no flexibility on the 100 fpm velocity requirement or adherence to the recognized safety standards.

Engineering Services

POSTED

DEADLINE