1. Advance Contract Award Notice (ACAN)
An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.
2. Definition of the requirement
Library and Archives Canada has a requirement for the provision of extended support and maintenance service level agreement for its “Scanity” motion picture film scanners installed in the Gatineau Preservation Centre.
The required services include:
• 24 hour, 7 days a week telephone support for the troubleshooting and remote diagnosis of equipment issues.
• Coverage for all repair costs incurred for all eligible equipment or components that must be sent back to the factory for refurbishment as covered by DFT’s “Total Care” service level agreement.
• Providing all spare parts and replacing all eligible consumable/wearable components as covered by DFT’s “Total Care” service level agreement.
• Onsite emergency maintenance and repair services by a DFT authorized technician (all labour and travel expenses included) as covered by DFT’s “Total Care” service level agreement.
• One (1) preventative maintenance visit per year performed by a DFT authorized technician (all labour and travel expenses included) as covered by DFT’s “Total Care” service level agreement.
• Providing regular software and firmware updates to the Scanity film scanners as required to maintain functionality or correct for bugs and errors as covered by DFT’s “Total Care” service level agreement.
• Providing software upgrades that may offer new features and functionality during the term of the service contract as covered by DFT’s “Total Care” service level agreement.
3. Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements)
Any interested supplier must demonstrate by way of a statement of capabilities that it meets the following requirements:
1) The bidder must be authorized by Digital Film Technologies (DFT) as an official agent to offer the “Total Care” Scanity extended SLA support package in Canada.
4. Applicability of the trade agreement(s) to the procurement
This procurement is subject to the following trade agreement(s)
o Canadian Free Trade Agreement (CFTA)
o World Trade Organization - Agreement on Government Procurement (WTO-AGP)
o Canada-European Union Comprehensive Economic and Trade Agreement (CETA)
o Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP)
o Canada-Chile Free Trade Agreement (CCFTA)
o Canada-Colombia Free Trade Agreement (CCoFTA)
o Canada-Honduras Free Trade Agreement (CHFTA)
o Canada-Korea Free Trade Agreement (CKFTA)
o Canada-Panama Free Trade Agreement (CPaFTA)
o Canada-Peru Free Trade Agreement (CPFTA)
o Canada-United Kingdom Trade Continuity Agreement (Canada-UK TCA)
o Canada-Ukraine Free Trade Agreement (CUFTA)
5. Justification for the Pre-Identified Supplier
The proposed supplier, CEV, is the exclusive Canadian reseller authorized to offer “Total Care” extended SLA support contracts provided by Digital Film Technologies for the servicing and maintenance of their Scanity line of motion picture film scanners. There is no other supplier authorized in Canada to facilitate these services from DFT in the Canadian market. There are only three Scanity film scanners in Canada, and LAC operates two of them.
6. Government Contracts Regulations Exception(s)
The following exception(s) to the Government Contracts Regulations is invoked for this procurement under subsection 6(d) - "only one person is capable of performing the work".
7. Exclusions and/or Limited Tendering Reasons
The following exclusion(s) and/or limited tendering reasons are invoked under the (section of the trade agreement(s) specified):
a. Canadian Free Trade Agreement (CFTA) – Article 513.1(b)
b. Revised World Trade Organization - Agreement on Government Procurement (WTO-AGP) – Article XIII.1.b
c. Canada-European Union Comprehensive Economic and Trade Agreement (CETA) – Article XIII.1.b
d. Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) – Article15.10.2.b
e. Canada-Chile Free Trade Agreement (CCFTA) – Article15.10.2.b
f. Canada-Colombia Free Trade Agreement – Article 1409.1.b
g. Canada-Honduras Free Trade Agreement – Article 17.11.2.b
h. Canada-Korea Free Trade Agreement – Article 22.1.3.b
i. Canada-Panama Free Trade Agreement – Article 16.10.1.b
j. Canada-Peru Free Trade Agreement (CPFTA) – Article 1409.1.b
k. Canada-United Kingdom Trade Continuity Agreement (Canada-UK TCA) – Article 10.13.1.b
l. Canada-Ukraine Free Trade Agreement (CUFTA) – Article 10.13.1.b
8. Ownership of Intellectual Property
Ownership of any Foreground Intellectual Property arising out of the proposed contract will vest in the Contractor.
9. Period of the proposed contract or delivery date
The proposed contract is for a period of one (1) year and two (2) one-year option periods.
Initial contract: 2026-02-01 to 2027-01-31
First option period: 2027-02-01 to 2028-01-31
Second option period: 2028-02-01 to 2029-01-31
10. Cost estimate of the proposed contract
The estimated value of the contract, including option(s), is $602,378.00 (GST/HST extra).
11. Name and address of the pre-identified supplier
CEV
5650 Rue D'Iberville
Suite 650
Montréal, QC
H2G 2B3, Canada
Phone
+1 (•••) •••-••••Sign up to see this detail
Toll-free
+1 (•••) •••-••••Sign up to see this detail
Email
•••••@•••••.•••Sign up to see this detail
12. Suppliers' right to submit a statement of capabilities
Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.
13. Closing date for a submission of a statement of capabilities
The closing date and time for accepting statements of capabilities is December 23, 2025 at 2:00 pm EST.
14. Inquiries and submission of statements of capabilities
Inquiries and statements of capabilities are to be directed to:
Elyse Le Guerrier
Senior Procurement and Material Management Officer
550 de la Cité blvd.
Gatineau, Qc
K1A 0N4
Telephone:
+1 (•••) •••-••••Sign up to see this detail
E-mail:
•••••@•••••.•••Sign up to see this detail
