Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW ASSEMBLY, PANE

Active
SPE4A6-26-T-02WLFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 39 units of a screw assembly, panel, identified by NSN 5305-01-527-9845, under solicitation SPE4A6-26-T-02WL issued by the DLA Aviation, ASC Commodities Division, Department of Defense. Delivery is mandated within 161 days ADO with a required ship date of December 22, 2026, and the item must be delivered FOB Origin to the destination address in New Cumberland, Pennsylvania. The unit of issue is each (EA), with no variance permitted in quantity. Inspection and acceptance occur at the destination, and the contractor must comply with stringent quality control standards including sampling in accordance with MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based sampling plan, where critical, major, and minor attributes are governed by AQL levels of 0.1, 1.0, and 4.0 respectively, and unspecified attributes are treated as major. Zero non-conformances are required in sample lots if MIL-STD-105/ASQ Z1.4 is used, unless otherwise directed. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, including RT001 for measuring and test equipment, RC001 for source approval documentation, RP001 for DLA packaging standards, and RQ011 for removal of government identification from rejected supplies. Palletization and packaging must adhere to RP001 and MIL-STD-129, superseding ASTM D3951. The item is designated as a critical application and must be marked in accordance with RQ017, with identified part numbers linked to Square Deal Machining, Inc. and Lockheed Martin Corporation. Cybersecurity requirements mandate compliance with NIST SP 800-171 under DFARS 252.240-7997, with approved deviations in effect. The Buy American Act and Berry Amendment apply, restricting foreign material sourcing, and the contractor must submit Safety Data Sheets for any hazardous materials as a mandatory pass/fail criterion before award. Invoicing and payment must be processed through WAWF with a combined receiving report and invoice, and contractors must maintain active SAM registration and provide accurate socioeconomic representations. The contract prohibits internal confidentiality agreements, requires whistleblower protections, and en

General Info

Procurement of 39 screw assemblies for pane applications via DLA solicitation SPE4A6-26-T-02WL, due July 13, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-02WL Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
NYJEL KNOWLIN
contact@example.gov

Full Description

Show more
SCREW ASSEMBLY,PANE
SCREW ASSEMBLY,PANEL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RT001: MEASURING AND TEST EQUIPMENT
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
SQUARE DEAL MACHINING, INC. 6QQA3 P/N 79717007-006
LOCKHEED MARTIN CORPORATION 04939 P/N 79717007-006
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-02WL
SECTION B
PR: 7017385063 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017385063 0001 EA 39.000
NSN/MATERIAL:5305015279845
DELIVERY (IN DAYS):0161
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/22/2026 Original Required Delivery Date:12/22/2026
SPE4A6-26-T-02WL NSN/Part Number: 5305-01-527-9845 Quantity: 39 EA Purchase Request: 7017385063QTY: 39 Delivery: 161 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANThe contract specifies the procurement of a close tolerance screw with part number C20645-3-2 and NSN 5305014586543, requiring 739 units to be delivered FOB origin within 341 days, with a unit price of $739.00 and a total value of $546,121. The item is designated as a critical application component, subject to stringent quality and configuration control requirements under DLA directives, including compliance with MIL-STD-1916 or comparable zero-based sampling plans where critical attributes demand verification level VII or AQL 0.1 and non-conformances must be zero unless otherwise stated. All supplies must adhere to MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA-specific packaging guidelines, with no special marking applied. Inspection and acceptance occur at the manufacturer’s origin, and configuration changes must be managed through formal engineering change proposals or variance requests. The contract incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. A separate line item for the First Article Test (FAT) is included with a quantity of one unit, identified by NSN 0001S00000052, priced at $1.00 but with no separate charge assumed unless specified; the actual test quantity is defined under FAR clauses 52.209-3 or 52.209-4 in Section A of the solicitation, and the FAT line will not be awarded if the requirement is waived. Packaging and shipping instructions direct delivery to DLA Distribution Depot Hill at Hill AFB, Utah, referenced under DLA Procurement Notes C19 and C20 for transportation protocols. Multiple approved suppliers are listed including Lockheed Martin Corp, SPS Technologies LLC, Valley-Todeco Inc., and B & B Specialties Inc., all authorized under shared part numbers and manufacturer codes. The solicitation number is SPE4A6-26-T-05PM, issued by the Department of Defense’s ASC Commodities Division with a response deadline of July 21, 2026, and the contract is bound by comprehensive quality assurance provisions applicable to both manufacturers and non-manufacturers under tailored higher-level requirements.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe item specified is a screw, cap, socket head, with NSN 5305-01-497-3150, and a quantity of 12 units required under purchase request 7017420896. Delivery is scheduled within five days of award. Technical data associated with this item is subject to U.S. export control regulations under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons regardless of location, including foreign national employees and overseas subsidiaries. Compliance requires adherence to DFARS 252.225-7048, and only DLA contractors with valid U.S./Canada Joint Certification Program certification, verified completion of DOD export-controlled data training, and approved status through the DLA questionnaire are authorized to access or handle this data. The procurement is conducted under solicitation SPE7M0-26-T-003K, posted on July 13, 2026, with responses due by July 21, 2026. The contracting activity falls under the Department of Defense’s Maritime Supply Chain ESOC Buys, with performance location at Pearl Harbor, Hawaii, and primary point of contact being Grace Beck at grace.beck@dla.mil or 614-698-7554.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, CASTELLATThe contract involves the procurement of 39 castellated hexagon nuts with the NSN 5310-00-167-1279 under solicitation SPE4A6-26-T-05NY, issued by the ASC Commodities Division of the Department of Defense. The items must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless amended. Packaging, identification, and marking of the nuts are governed by specific DLA requirements including RP001, RQ011, and RQ017, ensuring proper handling and traceability. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for limited functional uses such as batteries, fluorescent lamps, sensors, weapons systems, or specified reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The delivery schedule requires fulfillment within 59 days after contract award, with performance taking place in Tracy, California. The solicitation was posted on July 13, 2026, with responses due by July 21, 2026, and is procured as fully competitive under a federal specification. Primary point of contact is Ashley Sacolick via email at ashley.sacolick@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 165 units of a screw, cap, socket head, self-locking, identified by NSN 5305-00-940-9531, under solicitation SPE4A6-26-T-05PC, with a delivery requirement of 146 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and the item is subject to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. All units must be physically marked in accordance with MIL-STD-130N for identification, and government identification must be removed from non-accepted supplies. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels or AQLs as specified. Thread dimensions for Class 3A and 3B threads must conform to System 22 of FED-STD-H28/20, excluding small internal and external threads. Cybersecurity compliance requires CMMC Level 2 self-assessment, and third-party assessments must be performed by a certified C3PAO. The solicitation is fully competitive under military specification, with drawings available only during the open solicitation period via the DIBBS portal, and performance is to be delivered to San Diego, CA. The primary point of contact is Lisa Harvie of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to a single socket head cap screw, identified by part number M1222SN8C340NCNN and NSN 5305-01-692-5548, manufactured in compliance with MIL-DTL-1222J revision J dated December 8, 2000, and subject to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. All identification markings must adhere to MIL-STD-130N paragraph 4.1.b(2), in addition to standard manufacturer markings, and packaging must conform to MIL-STD-2073-1E with specific preservation methods, including type 33 preservation, vacuum sealing, and use of unit containers as defined. Inspection and acceptance protocols require zero non-conformances under a zero-based sampling plan per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item must be delivered within five days of order, FOB origin, with no tolerance for quantity variance, and shipped via traceable freight methods—parcel post is prohibited. Packaging and marking must comply with MIL-STD-129 and DLA packaging guidelines, with no special markings required. The delivery destination is Electric Boat Corporation in N Stonington, CT, and the required delivery date is March 26, 2026, under contract number SPE4A6-26-T-09N7, with point of contact and all compliance details tied to DLA procurement standards.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details