Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

SCREW ASSEMBLY, PANE

Awarded
SPE4A6-26-T-9501Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract, awarded to HC MERCHANDISERS, INC. (CAGE 53037) under solicitation SPE4A6-26-T-9501 and identified by contract number SPE4A626P8260, is a firm-fixed-price award for one line item: a SCREW ASSEMBLY, PANE, with a total value of $35,074.00. The award was issued on July 17, 2026, with an effective date of December 4, 2025, and performance is to be fulfilled from the contractor’s location at 5536 Ontario Mills Parkway, Ontario, CA 91764-5117. The item is identified by NSN 5305015599487 and falls under NAICS code 332722, indicating manufacturing of fabricated metal products. The contract is administered by the Defense Logistics Agency through its Aviation, ASC Commodities Division in Richmond, VA, with Dean Allen serving as the Contracting Officer and reachable via CARL.ALLEN@DLA.MIL. No Contracting Officer’s Representative or technical oversight information is provided. The place of performance is clearly designated, but delivery schedules, quantities, FOB terms, and inspection details are not specified, with performance governed under an “As Required Order” framework. Packaging, marking, and preservation requirements are not explicitly defined, though compliance with standard DoD practices using CAGE and NSN identifiers is implied. The only clause explicitly incorporated is FAR 52.222-90, Addressing DEI Discrimination by Federal Contractors, applied under Deviation 2026-00040 Revision 1, which mandates prohibiting racially discriminatory DEI practices, requiring reporting of subcontractor violations, and mandating flow-down to all domestic subcontracts. Compliance with this clause is material to payment. No other special requirements, socioeconomic certifications, inspection criteria, or invoicing methods are delineated, and while the contract structure suggests a Low-Price Technically Acceptable selection process, this is not formally stated. No attachments, detailed technical specifications, or quality standards are included, and while the contract references Standard Form 30 and uses electronic communication for administration, no specific submission formats, deadlines beyond solicitation notices, or accounting data such as AAC, TAS, or ACRN lines are provided.

General Info

HC MERCHANDISERS, INC. to supply screw assembly under $35K DLA contract, performance in U.S., sole provider.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$35,074

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

HC MERCHANDISERS, INC.View Profile

Award Issued Date

Documents

(1)

SPE4A626P8260_P00001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS

Full Description

Show more
DLA award SPE4A626P8260 posted on DIBBS. Awardee: HC MERCHANDISERS, INC. (CAGE 53037) Total Contract Price: $35,074.00 Award Date: 07-17-2026 Solicitation: SPE4A6-26-T-9501 Line items: - SCREW ASSEMBLY, PANE (NSN/Part 5305015599487, PR 7011548808)

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPE4A6-26-U-3296
This contract specifies the procurement of a screw with close tolerance, identified by NSN 5305-01-321-6120 and part number NAS1973T26T, manufactured to meet the non-government standard NAS1972 through NAS1980 Revision 7 and NAS4004 Revision 16. The item is classified as a commercial item and a critical application component requiring source inspection, with all threads of class 3A and 3B subject to dimensional verification per System 22 of FED-STD-H28/20, excluding very small internal and external threads. Manufacturing must adhere to the current revision of the applicable standard, and prior revisions are acceptable only for historically produced items. The manufacturing process requires forging, necessitating specialized tooling, and the supplier must comply with SAE AS9100 quality requirements, regardless of whether they are a manufacturer or non-manufacturer. All items must be marked per MIL-STD-130N paragraph 4.1.b(2) in addition to manufacturer logos and material identifiers, and packaged in accordance with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero defect acceptance unless otherwise specified, and attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The contract is a total small business set-aside under NAICS 332722, with delivery due in 108 days FOB origin, no variance permitted in quantity, and inspection and acceptance occurring at the origin. The unit of issue is each, with a quantity of 65 units, and packaging must adhere to DLA’s packaging requirements including palletization standards. The solicitation is managed by the Defense Logistics Agency and is open to responses through the DIBBS system.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
BOLT, HOOK
Solicitation # SPE4A1-26-T-2504
The contract pertains to the procurement of 25 BOLT, HOOK items with NSN 5306-01-503-9383 under solicitation SPE4A1-26-T-2504, requiring delivery within 20 days to FPO AP 96672 aboard USS MAKIN ISLAND LHD 8. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. Packaging must follow DLA’s packaging requirements and be palletized according to RP001, with no tolerance for quantity variance—exactly 25 units must be delivered. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331 with a zero-defect acceptance criterion unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The unit of issue is EA, with a unit price of $25.00 and a total contract value of $625.00. Items must be shipped via traceable transportation methods, avoiding parcel post, in accordance with DLAD PROC NOTES C19 and C20, and must bear proper identification per RQ017. The supplier, MCMASTER-CARR SUPPLY CO, must meet all government-unique requirements including the use of specified packaging data QUP:025 and reference to the correct DLA unit of issue standards. The required delivery date is July 27, 2026, and the contract is managed under the Department of Defense’s Aviation Supply Chain with primary point of contact Jade Stringfield.
AVIATION SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIVET
Solicitation # SPE4A0-26-T-4129
The contract specifies the procurement of 10 plain blind rivet nuts with the NSN 5310-00-934-0222, supplied in cadmium-plated steel, to be delivered within five days of award. All items must comply with stringent quality and identification standards, including MIL-STD-130N for military property marking and adherence to DLA packaging requirements. The contract mandates compliance with specific Contract Data Requirements Lists such as DD Form 1423s and CDRLs related to quality certification, removal of government identification from non-accepted supplies, and physical identification of bare items. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Quality conformance inspections are required, and the manufacturer may elect attribute or variable inspection methods under MIL-STD-1916. All technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling compliance. The solicitation number is SPE4A0-26-T-4129, posted August 2, 2026, with a response deadline of August 10, 2026, and the point of contact is Danita Davis of the Department of Defense’s Aviation Supply Chain ESoC Buys.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
GASKET AND PREFORME
Solicitation # SPE7L3-26-T-144U
The contract involves the procurement of a gasket and preformed packing assortment identified by NSN 5330015604081 and part number 285000840051880, with a total quantity of 57 thousand units to be delivered under solicitation SPE7L3-26-T-144U. Delivery is required within 46 days of contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The packaging must comply with MIL-STD-2073-1E specifications, including use of preservative method 33, dry packaging, and buffering materials, while marking adheres to MIL-STD-129 with no special marking required. The packaging and palletization must follow DLA’s procurement requirements, and hazardous materials handling is governed by IP025. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, with a needed ship date of August 5, 2025, though the original required delivery date was May 15, 2025. The item is strictly prohibited from containing asbestos as defined by FED-STD-313, and government identification markings in non-accepted supplies must be removed per RQ011. Technical and quality requirements referenced in this contract are sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions. The unit of issue is KT, with no variance allowed in quantity, and all data aligns with DoD standards for procurement and logistics.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIV
Solicitation # SPE4A6-26-T-11GF
The contract entails the procurement of 300 units of NUT, PLAIN, BLIND RIV with NSN 5310-01-666-2654 under solicitation SPE4A6-26-T-11GF, with delivery required within 207 days FOB origin. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. Sampling for quality verification shall follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise contracted, with attributes classified per critical, major, or minor levels corresponding to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or Navsea-specified chemical reagents; portable devices with mercury must include shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. The product shall be manufactured to TDP Rev C Gen 3 per NAS1738 Rev 6 dated 11/30/2024, and the unit of issue is each (EA) with no variance allowed in quantity. Delivery is to be made to the DLA Distribution facility in New Cumberland, PA, with inspection and acceptance occurring at destination. The contract enforces zero tolerance for non-conforming items, requires full compliance with government identification removal protocols for rejected supplies, and mandates bare item marking per RQ017. The point of contact is Molitauoleava Langi, and the solicitation closed on August 10, 2026, with an original need date of March 6, 2027.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 331315
New
DIBBS
HOUSING, LATCH PAN A
Solicitation # SPE8E5-26-T-3746
The contract is for one unit of a Housing, Latch Pan Assembly identified by part number 5599908-19 and NSN 5411-01-375-3695, with a requirement for delivery within 20 days after award. The item is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through an accredited third-party assessment organization, and packaging must adhere to DLA-specific guidelines. The supply is classified as covered defense information and is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. entities. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the technical data. The solicitation number is SPE8E5-26-T-3746, issued on August 2, 2026, with responses due by August 13, 2026, under NAICS code 331315, and performance is designated for FPO with ZIP 96667. The primary point of contact is Don Trachtman, reachable via email and phone provided, and the contract is managed by the Defense Logistics Agency under the Department of Defense.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
NOZZLE, FIRE EQUIPME
Solicitation # SPE8E6-26-T-3955
The contract pertains to the procurement of a single nozzle for fire equipment, identified by NSN 4210-01-658-7880 and part number 05000542, with a required delivery of five days from the date of award. The item is to be shipped FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s master list of technical and quality requirements, prioritizing those referenced by R or I numbers over general standards like ASTM D3951. If the item is non-hazardous per Fed-Std-313, it must be commercially packaged in accordance with ASTM D3951 but fully aligned with DLA’s superior specifications, including labeling and marking per MIL-STD-129 and palletization per RP001. Hazardous materials must meet TQ requirement IP025. The unit of issue is each, and one unit is ordered under purchase request 7017689821. Delivery must be made via the fastest traceable means, explicitly prohibiting parcel post, and shipped to the designated DLA retail facility in Albany, Georgia. The original required delivery date is August 4, 2026, and the contract was solicited under SPE8E6-26-T-3955 with a response deadline of August 13, 2026. All technical and quality compliance is governed by the DLA Master List in effect at the time of award, and the contracting officer is John Lieb of the Defense Logistics Agency.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details