SCREW ASSEMBLY, PANE

The contract solicitation SPE4A6-26-T-06VG seeks 15 units of a screw assembly, panel, identified by NSN 5305-01-528-2132, with delivery required within 200 days after order, targeting a final delivery date of February 9, 2027. All supplies are to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers including RP001 for packaging, RT001 for measuring equipment, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for bare item marking. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, unless otherwise specified, with acceptance criteria requiring zero non-conformances under MIL-STD-105 or ASQ Z1.4 unless a different standard is explicitly stated. Attributes are to be categorized as critical, major, or minor, corresponding to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging and marking must adhere to ASTM D3951 and MIL-STD-129, including hazardous material labeling per 29 CFR 1910.1200 and radioactive material thresholds specified in MIL-STD-129. Documentation requirements for source approval requests are outlined under RC001, and all items must be uniquely identified with proper physical marking. The contract incorporates a comprehensive set of federal acquisition regulations and defense supplemental clauses covering equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, hazardous material safety, and intellectual property authorization. Notably, Alternate I of FAR 52.216-1 is used with a deviation in place, and FAR 52.227-1 Alternate II is applied for authorization and consent. Subcontracting for commercial items follows DFARS 252.244-7999 under deviation 2026-00015, and compliance with NIST SP 800-171 for cybersecurity is mandated under 252.240-7997 with deviation