Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW ASSEMBLY, PANEL

Active
SPE4A6-26-T-07CRFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits 13 units of a screw assembly panel with part number 79717005-002, sourced exclusively from Lockheed Martin Corp. (CAGE 6QQA3), identified by NSN 5305-01-527-8890. Delivery is required within 134 days after order receipt, with an original delivery date of October 14, 2026, and a need ship date of December 6, 2026. Items must be shipped FOB Origin to the DLA Distribution DDSP New Cumberland Facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951, with DLA Master List of Technical and Quality Requirements taking precedence. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 requirements. Sampling is governed by MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels of VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major, and acceptance requires zero non-conformances under MIL-STD-105/ASQ Z1.4 when used. Physical identification and bare item marking must meet RQ017 standards. The contract incorporates multiple FAR clauses including safeguarding covered defense information per 252.204-7012, prohibition of hexavalent chromium per 252.223-7008, export control compliance per 252.225-7048, and mandatory NIST SP 800-171 DOD assessment with deviation 2026-O0025. Subcontracting follows 252.244-7999 with deviation 2026-O0015, and electronic payment via WAWF is required with both an invoice and receiving report. Offerors must complete all required representations in SAM, including small business status, combating trafficking, employment eligibility verification, and prohibited

General Info

13 screw assembly panels from Lockheed Martin, deliver by Dec 6, 2026, to New Cumberland, PA, per MIL-STD and FAR clauses.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-07CR DLA Aviation Jul 17 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
ANTONIA Willcox
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW ASSEMBLY,PANEL
SCREW, ASSEMBLY PANEL
LOCKHEED MARTIN CORP.(04939) ORLANDO, FL. P/N 79717005-002 ACCEPTABLE
SOURCE(S) CAGE 6QQA3 P/N 79717005-002
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SQUARE DEAL MACHINING, INC. 6QQA3 P/N 79717005-002
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017528200 0001 EA 13.000
SPE4A6-26-T-07CR
SECTION B
PR: 7017528200 PRLI: 0001 CONT’D
NSN/MATERIAL:5305015278890
DELIVERY (IN DAYS):0134
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/06/2026 Original Required Delivery Date:10/14/2026
SPE4A6-26-T-07CR NSN/Part Number: 5305-01-527-8890 Quantity: 13 EA Purchase Request: 7017528200QTY: 13 Delivery: 134 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EXThis contract is for the procurement of 12,382 self-locking, extended washer hexagon nuts with NSN 5310-00-807-1474 under a Firm Fixed Price Indefinite Delivery Purchase Order (IDPO) with a three-year base period and no options, subject to a total maximum contract value of $1,000,000. The delivery is due 405 days after award, with FOB origin terms, and the item is designated by the Navy as a Critical Safety Item requiring strict compliance with quality and sourcing controls. The nuts must conform to NASM21042 Revision 3 and NASM25027 Revision 1, alongside comprehensive technical and quality requirements from the DLA Master List, with inspection and acceptance performed at origin. Sampling must adhere to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with verification levels assigned as VII for critical, IV for major, and II for minor attributes, and unspecified attributes treated as major. All items must be marked per MIL-STD-129, including lot and serial numbers, contractor and actual manufacturer CAGE codes, and part numbers, with packaging compliant with MIL-STD-2073-1E and DLA Packaging Requirements, and no mercury or mercury compounds permitted except under specific exceptions for functional uses in batteries, instruments, weapon systems, or NAVSEA-specified reagents, with portable devices requiring shock-proofing and secondary containment. The contract mandates adherence to multiple federal and defense acquisition regulations, including clauses on termination, excusable delays, changes, and prohibitions on certain telecommunications equipment, and requires electronic invoicing via WAWF. Offerors must be registered in SAM and complete required representations, including certifications regarding foreign ownership, export control, and inverted domestic corporations, with a deviation applied to 52.204-19. Export-controlled technical data subject to ITAR or EAR is involved, limiting participation to contractors with approved US/Canada Joint Certification Program credentials, completed DLA export training, and DLA authorization. Only small businesses are eligible under a total small business set-aside, and the award will be based on a best-value determination weighing price, past performance, and delivery performance, with past performance—particularly PIPRS assessments, quality history, and delivery compliance—weighed more heavily than quoted delivery. The contractor must maintain an approved inspection system
ASC COMMODITIES DIVISION

POSTED

in 34 minutes

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCEThis contract specifies the procurement of a close-tolerance screw identified by NSN 5305-01-433-8875 and part number 3M1169V3-4A, with a total quantity of 7,989 units to be delivered 232 days after award, no later than March 14, 2027. The item is classified as a commercial item of a type, with delivery terms FOB origin, meaning the contractor assumes all shipping risk until tendered at the origin. Final delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, where government inspection and acceptance will occur. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization adhering to DLA Packaging Requirements for Procurement, while all DLA Master List of Technical and Quality Requirements take precedence over any general standards. The screw is designated as a critical application item and must be physically marked per RQ017 requirements, with multiple qualified vendors listed including Boeing, Arconic, SPS Technologies, and others, all supplying identical part numbers. The contract imposes stringent compliance obligations related to hazardous materials, cybersecurity, and quality assurance, including a complete prohibition on intentional addition of mercury or mercury compounds, with exceptions limited to specific functional applications such as batteries or sensors as defined by NAVSEA, and mandates shock-proof containment for portable mercury-containing devices. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required in the sample lot unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Cybersecurity requirements are extensive, enforcing NIST SP 800-171 controls, safeguarding covered defense information, prohibiting acquisition of telecommunications equipment from designated Chinese military companies, and mandating cyber incident reporting within 72 hours. All contractors must comply with federal labor regulations on whistleblower rights, employment verification, anti-trafficking, and electronic invoicing through WAWF. The contract explicitly uses FAR clauses under deviation approvals, including modified versions of the type of contract clause and socioeconomic representations. Although pricing is not detailed in Section B, the line item is fixed-price, with no option quantities, and the solicitation closed on July 24, 2026, through the DIBBS portal under NAICS code 332722.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
STUD, SELF-LOCKING
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, ASSEMBLED WASHERThe contract pertains to the procurement of 147 units of a screw with an assembled washer, identified by NSN 5305-01-330-5092, under solicitation SPE4A6-26-T-07CC. Delivery is required within 267 days after order, and the procurement is governed by strict technical, quality, and cybersecurity standards tied to the DLA Master List of Technical and Quality Requirements. The item is subject to export control under either ITAR or EAR, restricting any disclosure or transfer of associated technical data to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Only contractors with approved US/Canada Joint Certification Program status, completion of dedicated DOD export control training, and DLA authorization may access the controlled technical data. The item also requires compliance with DLA packaging standards, tailored higher-level quality requirements for both manufacturers and non-manufacturers, inspection and acceptance at origin, removal of government identification from non-accepted items, physical identification marking of bare items, and adherence to CMMC Level 2 certification or self-assessment requirements. The place of performance is specified as New Cumberland, PA, with Antonia Willcox as the primary point of contact, and the NAICS code 332722 identifies the industrial classification.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, BEVELThe contract pertains to the procurement of eight bevel washers identified by NSN 5310-01-658-3478, with a delivery requirement of 20 days after order. The solicitation, issued under number SPE4A6-26-T-06VZ on July 16, 2026, with a response deadline of July 24, 2026, is managed by the ASC Commodities Division of the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with revisions controlled based on the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted items must have government identification removed. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stipulated. Documentation for source approval must meet RC001 requirements, and all work is subject to the specified quality assurance provisions. The primary point of contact is Krystle Bailey, reachable at the provided phone and email.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details