This Solicitation opportunity from Department Of Defense was posted on April 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SCREW, CAP, HEXAGON H

Closed

SPE4A6-26-T-26N2Federal

Submission Closed04/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722

New

SLED

Electrical Connectors & FastenersThis subcontract for Electrical Connectors and Fasteners supports prime contractors working on Nebraska Public Power District projects. The scope of work involves the delivery of high-conductivity terminals and assembly hardware, specifically solderless compression ring terminals made from copper or aluminum alloy preloaded with non-oxidizing inhibitor. Additionally, the contract requires the provision of stirrups and 18-8 stainless steel assembly bolts equipped with silicon bronze hex nuts. All provided materials must adhere to Build America, Buy America (BABA) compliance standards. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 6, 2026. The contract falls under NAICS code 332722 and focuses on the essential supply of specialized electrical fasteners and connectors for regional power infrastructure.

Nebraska Public Power District

POSTED

DEADLINE

Supply of Round Plain Nuts (NSN 5310-00-839-1524)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the supply of 84 round plain nuts identified by NSN 5310008391524. The hardware must strictly adhere to the DLA Master List of Technical and Quality Requirements and be delivered via FOB Origin to Cherry Point by April 3, 2028. To be eligible, contractors must provide a valid CAGE code and UEI, and they must certify that no covered defense telecommunications equipment is used in accordance with FAR 52.204-24. The opportunity falls under NAICS code 332722, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Close Tolerance Screw Manufacturing (NAS7802U3)This subcontract involves the manufacture of 116 close tolerance screws, part number NAS7802U3, for the DLA Weapons Support ASC Commodities Division. The fabrication process requires precision CNC machining in strict accordance with National Aerospace Standard 80205 and TDP Rev A Gen 1. Quality control must be maintained through sampling per MIL-STD-1916 or ASQ H1331, and the final products must adhere to Buy American requirements and MIL-STD-2073-1E packaging standards. The project is categorized under NAICS code 332722 and will be performed in New Cumberland. Interested parties should note the response deadline of November 5, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Multiple Angle Sensor BracketsThis subcontract with the Department of Defense, specifically the DLA Weapons Support Land Supply Chain, involves the manufacture or procurement of Multiple Angle Sensor Brackets under NSN 5340016076959. The contractor is responsible for supplying 12 units of these specialized hardware brackets to prime contractors, with a strict delivery requirement of 5 days from the date of order. Performance for this contract is based in Anniston. Compliance with specific military and industry standards is mandatory, requiring all non-hazardous materials to be packaged according to ASTM D3951 and all shipments to be labeled per MIL-STD-129. The opportunity falls under NAICS code 332722 and was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Machine Screws (NSN 5305-01-406-9165)This subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the procurement and delivery of machine screws identified by NSN 5305-01-406-9165. The contractor is responsible for supplying these fasteners to prime contractors for various defense projects, with physical delivery to designated government locations, including Cherry Point. Logistics for the delivery of these parts are handled through the First Destination Transportation program. Strict manufacturing and sourcing compliance is required for this contract. All parts must be produced without the use of additive manufacturing processes and must adhere to the domestic material restrictions set forth by the Berry Amendment and the Buy American Act. The opportunity is categorized under NAICS code 332722, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Self-Locking Plate Nuts (NSN 5310-01-669-4613)This subcontract involves the supply of 155 self-locking plate nuts, identified by NSN 5310-01-669-4613, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing components that strictly adhere to Boeing part number BACN10TL3A6 and DLA Master List requirements. Performance will take place at Tinker AFB, with all units required to be packaged according to MIL-STD-2073-1E and MIL-STD-129 standards. To ensure quality and security, the contractor must maintain ISO 9001:2015 certification and demonstrate compliance with NIST SP 800-171. All delivered hardware must undergo sampling and inspection in accordance with MIL-STD-1916 or ASQ H1331. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Spring Pins (NSN 5315-01-599-0440)This subcontract involves the sourcing or fabrication of two spring pins under NSN 5315-01-599-0440 for prime contractors delivering to the Defense Logistics Agency Weapons Support LSO Combat Vehicles and Armament. The selected provider must ensure all components adhere to the DLA Master List of Technical and Quality Requirements and maintain domestic origin. Additive manufacturing processes are strictly prohibited unless specific authorization is granted. The project falls under NAICS code 332722 and will be performed at Camp Pendleton, California. Interested parties must respond by November 9, 2026, to fulfill the requirements of the Department of Defense.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Wiring Harness Manufacturing and IntegrationThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support ASC, involves the manufacturing and integration of wiring harness bracket assemblies for prime contractors. The scope of work includes cutting, stripping, crimping, and routing military-grade wiring in accordance with TDP Rev C Gen 3, as well as performing continuity testing for First Article Testing. Eligible bidders must be small businesses and maintain strict certifications, including ISO 9001:2015, ITAR/EAR compliance, US/Canada Joint Certification, and CMMC Level 2. The solicitation was posted on October 28, 2026, with a response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Flat Washer Supplier (NSN 5310009501403)This subcontract involves the procurement of 9,090 flat washers to support the DLA Weapons Support Nuclear Reactor Program for the Department of Defense. The hardware must be manufactured or sourced in strict accordance with NSN 5310009501403, NASM15795 Revision 3, and FF-W-92C(3) Revision C. All materials provided must be mercury-free, and the supplier is required to maintain compliance with DFARS 252.204-7012. Quality control must be performed according to MIL-STD-1916 or MIL-STD-105/ASQ Z1.4, with packaging and labeling adhering to MIL-STD-2073-1E and MIL-STD-129. The place of performance is designated as Tinker AFB. Interested parties must respond by November 9, 2026, under NAICS code 332722.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Blind Rivets (NSN 5320-01-032-8075)This subcontract involves the supply of blind rivets specifically meeting NSN 5320-01-032-8075 specifications to support prime contractors for the Defense Logistics Agency Weapons Support ASC Commodities Division. The selected provider is responsible for the manufacture or procurement of the rivets, as well as performing all necessary quality assurance and packaging to ensure the items are ready for shipment to designated destination acceptance points. The contract falls under NAICS code 332722 and requires the physical delivery of the rivets by the specified delivery date. Interested parties should note that the response deadline for this opportunity is November 5, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Precision Manufacturing of Plain Studs (NAS184)This subcontract involves the precision manufacturing of 103 plain studs for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production must adhere to NAS184 (S 2022) and drawing 13873 EI-010071708, utilizing precision CNC machining to ensure thread gaging for Class 3A and 3B threads in accordance with SAE AS8879 or MIL-S-7742. The final deliverables consist of 103 units under NSN 5307-01-007-1708. Strict quality and regulatory standards are required for this project, including the provision of a Certificate of Quality Compliance and full adherence to DFARS 252.204-7012. The work is categorized under NAICS code 332722 and is to be performed in New Cumberland. The response deadline for this opportunity is November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days

AI Contract Overview

This contract covers the procurement of a single unit of a cap screw with a hexagon head, specified under MIL-DTL-1222J, part number M1222RN5C210NALN, NSN 5305-01-713-5502. The item must fully comply with all current aspects of the MIL-DTL-1222J specification, including manufacturing processes, mechanical properties, markings, and inspections. Equipment manufactured to earlier revisions is unacceptable, and surplus items are explicitly disallowed. The screw must be marked according to MIL-DTL-1222J requirements, including material symbols, manufacturer logos listed in MIL-HDBK-57, and lot numbers, with all markings applied directly to the item if possible, or otherwise on packaging. Quality and inspection standards are stringent, requiring adherence to tailored higher-level contract quality requirements, quality conformance inspections, and acceptance at origin. Sampling methods follow MIL-STD-1916 or equivalent zero-based sampling plans with strict acceptance criteria and complete documentation through Certificates of Conformance. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with mercury-free preservation and packaging materials. Delivery is FOB origin to Electric Boat Corporation in North Stonington, CT, with a required delivery within five days of contract award. The contract procurement is managed by the ASC Commodities Division of the Department of Defense, with the assigned contract number SPE4A6-26-T-26N2 and a response deadline for bids set in late April 2026.

General Info

Procurement of MIL-DTL-1222J cap screw, strict quality, markings, packaging; FOB origin, delivery in five days.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

25 NORWICH WESTERLY RD, N STONINGTON, CT, 06359, USA

Set-Aside

NONE

Documents

SPE4A6-26-T-26N2.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedApr 19

Solicitation

Response DeadlineApr 27

Deadline has passed

Submission Closed

04/27/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

Ashley Jones

contact@example.gov

+1 (555) 000-0000

Full Description

SCREW,CAP,HEXAGON H
SCREW, CAP, HEXAGON HEAD
SPECIFICATION
MIL-DTL-1222J, P/N M1222RN5C210NALN
ITEMS SUPPLIED UNDER THIS NSN SHALL MEET ALL REQUIRED ASPECTS OF
MIL-DTL-1222J, INCLUDING BUT NOT LIMITED TO: MANUFACTURING PROCESSES,
MECHANICAL PROPERTIES, MARKINGS, INSPECTIONS AND EVALUATIONS. ITEMS
MANUFACTURED TO PREVIOUS REVISIONS OF MIL-DTL-1222 ARE NOT ACCEPTABLE
The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN. (End of TQ Requirement)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
ITEM SURFACE MARKING REQUIREMENT: MATERIAL SYMBOL, MANUFACTURER'S SYMBOL
SPE4A6-26-T-26N2
SECTION B
AND LOT NUMBER ARE REQUIRED AND SHALL BE APPLIED DIRECTLY TO THE SURFACE
OF THIS ITEM IN ACCORDANCE WITH MIL-DTL-1222. MATERIAL SYMBOL SHALL BE
IN ACCORDANCE WITH THE "ADDITIONAL REQUIREMENTS" COLUMN OF MIL-DTL-1222
TABLE I. LOCATION OF MARKINGS SHALL IN ACCORDANCE WITH MIL-DTL-1222J
PARA. 3.13.2.
THE MANUFACTURER'S SYMBOL (LOGO) MUST BE LISTED IN MIL-HDBK-57. FOR
FASTENERS LESS THAN 1/2 INCH DIAMETER, IF ALL REQUIRED MARKINGS CANNOT
BE APPLIED DUE TO SPACE LIMITATIONS, THE MARKINGS SHALL BE APPLIED IN
THE FOLLOWING ORDER OF PRECEDENCE: MATERIAL SYMBOL, MANUFACTURER'S
SYMBOL AND LOT NUMBER. MARKINGS NOT INCLUDED ON THE BARE ITEM SHALL BE
PLACED ON PACKAGING LABELS.
FOR MANUFACTURER'S SYMBOL INFORMATION AND INQUIRIES PLEASE VISIT THE
MIL-HDBK-57 URL AT:
https://www.troopsupport.dla.mil/Hardware/Technical/logoreg.asp
Unless otherwise stated, identification marking shall be in accordance with paragraph 4.1.b(2) of MIL-STD-130N. This is in addition to any required manufacturer's logo, lot number, and material identification markings.
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Collaboration Folders (CFolders) they can also be viewed in Appendix 1 of the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
SPE4A6-26-T-26N2
SECTION B
IAW BASIC DRAWING NR 53711 8616969
REVISION NR B DTD 12/17/2020
PART PIECE NUMBER: 845-8616969 ITEM 58
IAW REFERENCE QAP 13873 QAP-EQ003
REVISION NR D DTD 02/09/2023
PART PIECE NUMBER:
IAW REFERENCE SPEC NR MIL-DTL-1222J
REVISION NR J DTD 12/08/2000
PART PIECE NUMBER: M1222RN5C210NALN
IAW REFERENCE DRAWING NR 53711 T9074-AS-GIB-010/271
REVISION NR 1 DTD 09/11/2014
PART PIECE NUMBER:
IAW REFERENCE QAP 13873 CDRL-COQC-26033
REVISION NR DTD 12/04/2025
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016094775 0001 EA 1.000
NSN/MATERIAL:5305017135502
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
SPE4A6-26-T-26N2
SECTION B
PR: 7016094775 PRLI: 0001 CONT’D
Q90616
ELECTRIC BOAT CORPORATION
EAGLE PARK
25 NORWICH WESTERLY RD
N STONINGTON CT 06359
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
Q90616
ELECTRIC BOAT CORPORATION
EAGLE PARK
25 NORWICH WESTERLY RD
N STONINGTON CT 06359
US
M/F: (TCN) Q906166073F303
RDD:
PROJ: Z01 TP 1
SUPP ADD: N50438 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 9B ADV: 2L FC: XP
Need Ship Date:00/00/0000 Original Required Delivery Date:03/26/2026
SPE4A6-26-T-26N2 NSN/Part Number: 5305-01-713-5502 Quantity: 1 EA Purchase Request: 7016094775QTY: 1 Delivery: 5 days ADO