Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW, CAP, HEXAGON H

Active
SPE4A6-26-T-06CFFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 56 units of a hexagon head cap screw with NSN 5305-01-483-6286 under solicitation SPE4A6-26-T-06CF, with delivery required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including packaging per MIL-STD-2073-1E and marking in accordance with MIL-STD-129. Mercury and mercury-containing compounds are strictly prohibited in the product, its preservation, packaging, and marking except for specific exempted applications like batteries or sensors designated by NAVSEA, and portable mercury-containing devices must include a secondary containment boundary. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item must be physically marked per RQ017 with the part number 7377527 and meet DLA packaging requirements. Full compliance with government identification removal procedures for non-accepted supplies is mandated, and delivery is FOB origin with no variance permitted in quantity. The required delivery date is November 14, 2026, with a need ship date of January 10, 2027, and the contract is subject to DLA transportation and freight guidelines.

General Info

Procure 56 hexagon head cap screws, NSN 5305-01-483-6286, deliver to New Cumberland by Nov 14, 2026, compliant with MIL-STD and no mercury.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-06CF.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
KELA GRIFFIN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW,CAP,HEXAGON H
SCREW,CAP,HEXAGON HEAD
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
(53711) NAVAL SEA SYSTEMS COMMAND
TDP Rev A Gen 1 IAW BASIC DRAWING NR 53711 7377527 REVISION NR B DTD 11/25/2003 PART PIECE NUMBER: 7377527
SPE4A6-26-T-06CF
SECTION B
PR: 7017486562 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017486562 0001 EA 56.000
NSN/MATERIAL:5305014836286
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A6-26-T-06CF
SECTION B
PR: 7017486562 PRLI: 0001 CONT’D
Need Ship Date:01/10/2027 Original Required Delivery Date:11/14/2026
SPE4A6-26-T-06CF NSN/Part Number: 5305-01-483-6286 Quantity: 56 EA Purchase Request: 7017486562QTY: 56 Delivery: 171 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANThe contract pertains to the procurement of screws with close tolerance specifications, identified by NSN 5305-01-465-2389, with a total quantity of 1,461 units to be delivered FOB origin within 171 days. The screws must conform to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable sampling procedures governed by MIL-STD-1916, ASQ H1331, or comparable zero-based plans; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Acceptance requires zero non-conformances in the sample lot unless otherwise stipulated. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Physical identification and bare item marking are mandated per specified part numbers from approved manufacturers including Boeing, Reid Products, B & B Specialties, SPS Technologies, Howmet Global, and Heartland Precision Fasteners. Item Unique Identification is not required under DFARS 252.211-7003(c)(1)(i). Delivery is to be made to DLA Distribution Jacksonville at the designated parcel post and freight shipping address with a required ship date of January 10, 2027, and original delivery deadline of March 4, 2027. The contract enforces a strict zero percent variance in quantity and specifies destination as the inspection and acceptance point. All packaging and palletization adhere to DLA procurement standards, and the unit of issue is each (EA) as defined by DoD authorized standards.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SETSCREWThe contract pertains to the procurement of two set screws identified by NSN 5305-01-606-3467 under solicitation SPE4A6-26-T-06HD, with a required delivery within five days of award and FOB origin terms. The quantity is strictly fixed at two units with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply fully with MIL-STD-2073-1E, including preservation methods, unit containers, and marking in accordance with MIL-STD-129, with no special marking required. Palletization follows DLA packaging standards, and all preservation, packaging, and marking materials are prohibited from containing mercury or mercury compounds. The item must remain free of intentional mercury or mercury-containing substances, with narrow exceptions for batteries, fluorescent lights, sensors, weapons, and specific naval reagents, all of which must meet secondary containment requirements per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise specified, and attributes are assigned verification levels or AQLs accordingly. The delivery address is a U.S. naval facility in Sasebo, Japan, and the contract includes specific transportation and freight instructions referenced in DLA procedural notes. The solicitation was posted in July 2026 with responses due by the same month, issued under NAICS code 332722 by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCKThis contract specifies the procurement of one locking washer with NSN 5310016197723, sourced under solicitation SPE7M0-26-T-007R, with a required delivery within five days of award, delivered FOB origin. The item is designated as a critical application component and must comply with Curtiss-Wright Electro-Mechanical Corp part numbers 6053274 and 6053343-005. Strict packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129 are mandated, with no special marking codes required. The shipment must avoid parcel post and be sent via the fastest traceable means to the Norfolk Naval Shipyard in Portsmouth, VA. The use of Class I ozone-depleting chemicals is explicitly prohibited, superseding any conflicting specification requirements, and any substitute chemicals require prior approval. Packaging must adhere to DLA’s proprietary packaging requirements, and the unit of issue is the individual piece, with zero tolerance for quantity variance. The delivery deadline is July 14, 2026, and the contract directs compliance with the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issuance date. All deliveries must be accompanied by the designated freight shipping address and government-specific identifiers for tracking and accountability.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
WASHER, PLATEThe contract is for the procurement of 268 plate washers with NSN 5310-01-204-3095 under solicitation SPE4A6-26-T-05XY, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 80 days after award, and responses must be submitted by July 22, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Technical data associated with this item is subject to export control under ITAR or EAR, and unauthorized disclosure—even to foreign nationals within the U.S.—is prohibited. Access to this controlled data is restricted to contractors with approved U.S./Canada Joint Certification Program certification, completion of required DOD export control training, and explicit approval from DLA. The place of performance is San Diego, California, with Monica Greene as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FINISHINGThe contract is for the procurement of 62,946 washers, finishing, identified by NSN 5310-01-049-4086 and part number BACW10U-C102P, under solicitation SPE4A6-26-T-05WY. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, with palletization aligned to RP001, while marking and identification adhere to RQ017 and removal of government identification from non-accepted items per RQ011. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified; attributes are classified as critical, major, or minor with corresponding verification levels or AQLs. The item is deemed a critical application item requiring source approval documentation per RC001. Delivery is FOB origin with a 332-day delivery window, inspection and acceptance occur at the destination in Tracy, CA, and no quantity variance is permitted. All packaging and labeling must meet the specified unit of issue and quantity per unit pack as defined in the contract, and transportation details are governed by DLAD procedural notes C19 and C20. The required ship date is July 14, 2026, with the original delivery deadline set for November 15, 2027.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details