Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

SCREW, CLOSE TOLERANCE

Active
SPE4A6-27-T-6100Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-27-T-6100, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 10,539 close tolerance screws under NAICS code 332722. This is not a small business set-aside, though it is identified as a Service-Disabled Veteran-Owned Small Business set-aside in the metadata. The requirement specifies critical application items with various approved part numbers, including those from Boeing, SPS Technologies, and Howmet Global Fastening Systems. The items must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a need ship date of February 5, 2027, and an original required delivery date of May 25, 2027. The contract mandates strict adherence to quality and technical standards, including the DLA Master List of Technical and Quality Requirements and MIL-STD-129 for marking. Packaging must comply with ASTM D3951 and RP001, with specific prohibitions against the intentional addition of mercury. Inspection and acceptance will occur at the destination per FAR 52.246-2. Compliance with the Buy American Act and the Berry Amendment is required, and all quotes must be submitted via the DIBBS portal. Administrative requirements include electronic invoicing through the Wide Area Workflow system and adherence to DFARS 252.204-7012 regarding the safeguarding of covered defense information.

General Info

DLA procurement of 10,539 close tolerance screws for delivery by May 2027.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SDVOSBC

Documents

1

RFQ SPE4A6-27-T-6100

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Office AddressUSA
Contacts
Tyrone Gatewood
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW,CLOSE TOLERANCE
SCREW,CLOSE TOLERANCE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
BOEING CO (76301) P/N 3M1169V3-4A
CRITICAL APPLICATION ITEM
SPE4A6-27-T-6100
SECTION B
SPS TECHNOLOGIES, LLC 06725 P/N TX1026V3-4A
HUCK INTERNATIONAL, INC 17446 P/N TX1026V3-4A
HEARTLAND PRECISION FASTENERS INC 0ZC92 P/N 3M1169V3-4A
LISI AEROSPACE CANADA CORP DIV HI L4528 P/N TX1026V3-4A
REID PRODUCTS INC. 59563 P/N 11827V3-4A
HOUSTON PRECISION FASTENERS I LP 1VSL7 P/N 3M1169V3-4A
HOWMET GLOBAL FASTENING SYSTEMS INC 06950 P/N TX1026V3-4A
SPS TECHNOLOGIES LLC 27624 P/N TX1026V3-4A
SPS Technologies, LLC DBA 80539 P/N TX1026V3-4A VALLEY-TODECO, INC. 06710 P/N 3M1169V3-4A KARG CORP 58988 P/N 3M1169V3-4A WEST COAST AEROSPACE, INC. 60516 P/N WC1169V3-4A ARCONIC GMBH C4293 P/N TX1026V3-4A TWIST TITE MFG, INC 007R1 P/N 3M1169V3-4A SPS TECHNOLOGIES, LLC 56878 P/N TX1026V3-4A B & B SPECIALTIES INC 1EM77 P/N GS1006V3-4A HI-SHEAR CORPORATION 73197 P/N TX1026V3-4A
TDP Rev C Gen 3 IAW REFERENCE DRAWING NR 76301 3M1169 REVISION NR U DTD 01/08/2014 PART PIECE NUMBER: 3M1169V3-4A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018832969 0001 EA 10,539.000
NSN/MATERIAL:5305014338875
DELIVERY (IN DAYS):0097
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:025
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
SPE4A6-27-T-6100
SECTION B
PR: 7018832969 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/05/2027 Original Required Delivery Date:05/25/2027
SPE4A6-27-T-6100 NSN/Part Number: 5305-01-433-8875 Quantity: 10,539 EA Purchase Request: 7018832969QTY: 10539 Delivery: 97 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
Federal
Specialized Fastener Supply (Hex Cap Screws)This subcontract involves the procurement and delivery of military-grade Type I Hex Cap screws for prime contractors supporting Navsup Weapon Systems Support Mech projects. All supplied fasteners must be manufactured in strict accordance with MIL-DTL-1222 specifications to meet Department of Defense requirements. The opportunity is categorized under NAICS code 332722 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 27, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
Federal
Supply of Specialized Machine ScrewsThis subcontract with Navsup Weapon Systems Support under the Department of Defense involves the sourcing and delivery of specialized machine screws for prime contractors on U.S. Navy hardware contracts. The scope of work covers four line items, specifically focusing on NSN 5305-01-611-7878 and part numbers W25G1U and W62G2T. The contractor is responsible for ensuring all materials are packaged according to MIL-STD-2073 and must provide UIID and OEM Product Line Change Notifications. Compliance is a critical component of the agreement, requiring strict adherence to the Buy American and Balance of Payments Program requirements. The contract falls under NAICS code 332722, with a response deadline set for November 27, 2026.
Navsup Weapon Systems Support

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
Federal
Supply of Critical Safety Item (CSI) Tube Fitting PlugsThis subcontract, issued by the Department of Defense under Navsup Weapon Systems Support Mech, involves the manufacture and supply of specialized tube fitting plugs identified by NSN 1HM 4730-01-268-3287 L1. These components are intended for prime contractors working on US Navy shipboard system projects and must be produced in strict accordance with TDP Version O08 and Special Emphasis Material Level I requirements. Due to the nature of the application, the parts are designated as Critical Safety Items to prevent catastrophic failure, requiring rigorous quality certifications upon delivery. The contractor is responsible for providing both the physical plugs and the necessary documentation, utilizing the ECDS system with a PKI Digital Certificate for all secure data transmissions.
Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
Federal
53--NUT,SELF-LOCKING,HEXAG
Solicitation # SPE7M227T0501
DLA Weapons Support

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
Federal
53--NUT,SELF-LOCKING,HE
Solicitation # SPE4A627T7345
DLA Aviation

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
Federal
53--SCREW,CAP,SOCKET HEAD
Solicitation # SPE4A127T0220
DLA Aviation

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
Federal
BOLT,MACHINE
Solicitation # N0038327QTA09
Solicitation N0038327QTA09, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the procurement of machine bolts, specifically NSN 5306-01-706-0165 (Reference 81205 BACB30PW4P16). The government intends to make a single award to a responsible offeror based on the most advantageous offer, with past performance weighted as more important than price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System (SPRS) to assign color ratings. Amendment 0001 updated the required quantity from 2 to 1 and cancelled CLIN 0001AA. The contract requires delivery within 90 days on an FOB Destination basis. Strict adherence to quality management systems such as ISO 9001 or SAE AS9100 is mandatory. Packaging and marking must comply with MIL-STD-2073, MIL-STD-129, and MIL-STD-130, with specific requirements for Item Unique Identification (IUI) and electrostatic discharge protection where applicable. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. The procurement also incorporates various Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses regarding the Buy American Act, cybersecurity, and the prohibition of certain foreign telecommunications equipment.
Navsup Weapon Systems Support

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
Federal
SCREW,MACHINE
Solicitation # N0038326QTA66
Solicitation N0038326QTA66 is a competitive procurement issued by the Navsup Weapon Systems Support office in Philadelphia for the supply of machine screws. The requirement includes multiple line items with quantities ranging from 9 to 50 units each. The government intends to make a single award to a technically acceptable offeror, with the evaluation prioritizing past performance over price. Past performance will be assessed using the DoD Supplier Performance Risk System (SPRS) color ratings. The delivery period is set for 90 days, with FOB destination terms, and early or incremental deliveries are preferred. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073 for packaging and MIL-STD-129 and MIL-STD-130 for marking and item unique identification. Quality management must comply with ISO 9001 or SAE AS9100 standards. A critical requirement for P-8 CAT 1 and CAT 2 items is that no engineering changes affecting interchangeability, performance, safety, or FAA certification may be made without written government authorization. Invoicing and payments are processed electronically through the Wide Area Workflow (WAAF) system. The solicitation period has been extended multiple times, with the final response deadline set for November 27, 2026.
Navsup Weapon Systems Support

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
Federal
NUT,SELF-LOCKING,HE
Solicitation # N0010427QFA11
This fixed-price contract, solicitation number N00104-27-Q-FA11, is a total small business set-aside for the procurement of 368 self-locking hex nuts (Part Number NASM 17828-6C, NSN 5310-01-540-9579). The material is designated as Special Emphasis material for use in crucial shipboard systems, meaning that incorrect or defective parts could lead to serious personnel injury or loss of the ship. Consequently, the contractor must adhere to strict quality assurance standards, including ISO-9001 and ISO-10012, and provide a comprehensive certificate of compliance and objective quality evidence. The nuts must be manufactured from QQ-N-281 Class B Cold Drawn material and meet specific toxicity and flammability requirements per NAVSEA SS800-AG-MAN-010/P-9290. The contract is awarded on an FOB Destination basis with final delivery required within 210 days. A critical delivery milestone requires all certification data to be submitted via Wide Area WorkFlow (WAWF) 20 days prior to delivery for review and acceptance by the Portsmouth Naval Shipyard. Inspection and acceptance will occur at the origin. The government will utilize a single-award process where past performance is weighted as more important than price, utilizing the DoD Supplier Performance Risk System (SPRS) for evaluation. Additional requirements include strict material traceability per MIL-STD-792, mercury-free manufacturing, and compliance with the Buy American and Balance of Payments Program.
Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
Supply of Captive Screws (NSN 5305-01-591-3214)This subcontract involves the manufacture or procurement of 192 captive screws, identified by NSN 5305-01-591-3214, for prime contractors supporting the Department of the Navy's Navsup Weapon Systems Support Mech. The project requires strict adherence to IRPOD technical specifications and mandates that no mercury be intentionally used in the production process. Deliveries are to be split into two separate shipments to the performance location in Mechanicsburg. The contractor must provide a Certificate of Compliance in accordance with DI-MISC-81356 and ensure full alignment with FAR and DFARS Buy American clauses. This SBA set-aside opportunity falls under NAICS code 332722, with a response deadline set for November 27, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
Supply of Flat Washers (NSN 5310-00-921-6309)This subcontract involves the supply of 45 specialized flat washers for prime contractors supporting the Department of the Navy's Navsup Weapon Systems Support Mech. The contractor is responsible for manufacturing or sourcing the washers in strict accordance with NSN 5310-00-921-6309 and MIL-H-21367/1(SH), Item 11, Figure 10. Performance takes place in Mechanicsburg, Pennsylvania, under NAICS code 332722. The agreement mandates full compliance with the Buy American Act and Trade Agreements Act. Deliverables include the physical hardware along with required visual and dimensional inspection reports. Additionally, the contractor must ensure packaging meets MIL-STD-2073 standards and that all hazardous content is identified per OSHA 29 CFR 1910.1200 regulations.
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturing of Plain Extended Washer Hexagon NutsThis HUBZone set-aside subcontract involves the manufacture and supply of 2,950 plain extended washer hexagon nuts for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the nuts according to NSN 5310-01-137-6955 and the DLA Master List of Technical and Quality Requirements RA001. Strict adherence to quality and regulatory standards is required, including quality control sampling per MIL-STD-1916 or ASQ H1331 and marking per MIL-STD-129. Additionally, all materials used in production must be compliant with the Buy American Act. The response deadline for this opportunity is November 12, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 331110
New
DIBBS
Supply of Fastener-Grade Steel/AlloyThis HUBZone set-aside subcontract involves the supply of fastener-grade steel or alloy raw metal stock, provided as wire or bar, for prime contractors working on DLA Weapons Support ASC projects. The materials must strictly adhere to the metallurgical specifications of NSN 5310-01-137-6955 and be sourced domestically in compliance with the Buy American Act. The selected provider is responsible for delivering the raw metal stock directly to the manufacturer and providing Material Test Reports to verify that all technical standards have been met. This opportunity falls under NAICS code 331110 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 15 days
View Details
NAICS: 488510
New
DIBBS
Military-Grade Packaging and Marking ServicesThis HUBZone set-aside subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the packaging of small hardware components in strict accordance with MIL-STD-2073-1E and RP001 standards, ensuring all items are prepared for First Destination Transportation shipping. The contractor is responsible for applying shipping labels per MIL-STD-129 and utilizing military-specification materials to guarantee hardware survival during transit. The final deliverable consists of packaged and marked hardware ready for FOB Origin shipment. Interested parties must respond by November 12, 2026, under NAICS code 488510.
Freight Transportation Arrangement

POSTED

about 24 hours ago

DEADLINE

in 15 days
View Details
NAICS: 488510
New
DIBBS
Defense-Compliant Packaging and Labeling ServicesThis subcontract for Defense-Compliant Packaging and Labeling Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing specialized packaging, marking, and labeling of hardware to ensure all shipments are ready for FOB Origin transport. All activities must strictly adhere to RP001 and ASTM D3951 packaging standards, with markings applied according to MIL-STD-129 using approved MIL-SPEC materials and compliant labeling systems. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and will be performed at Tinker AFB. Interested parties should note the response deadline of November 4, 2026, for this opportunity categorized under NAICS code 488510.
Freight Transportation Arrangement

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 313113
New
DIBBS
Manufacturer of Threaded Pin-Rivets (NSN 5320-01-451-8479)This subcontract involves the manufacture and delivery of 187 threaded pin-rivets meeting NSN 5320-01-451-8479 specifications for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work is performed at Tinker AFB and strictly prohibits the use of additive manufacturing. The contractor must adhere to rigorous regulatory and quality standards, including the Buy American Act, the Berry Amendment, and the DLA Master List of Technical and Quality Requirements. Additionally, strict security and trade compliance are required, specifically CMMC Level 2, DFARS 252.204-7012, ITAR, and EAR standards.
Thread Mills

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Supply of Keyway Washers (NSN 5310001162378)This subcontract involves the procurement of seven aerospace-grade keyway washers, specifically Boeing part number 114S1903-84 and NSN 5310001162378, to support prime contractors under DLA Weapons Support supply contracts. The selected supplier is responsible for sourcing or manufacturing the components in strict accordance with DFARS 252.223-7008 and DFARS 252.225-7001 regulations, with all packaging and marking requirements adhering to MIL-STD-129. The contract is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division under NAICS code 336413. Delivery of the units is designated as FOB Origin, with the place of performance located in New Cumberland, Pennsylvania. The solicitation period opens on October 27, 2026, with a response deadline of November 4, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Supplier of Retaining Rings (NSN 5325-01-321-3445)This subcontract involves the manufacture or procurement of 112 retaining rings under NSN 5325-01-321-3445 to support prime contractors for the DLA Weapons Support ASC. The selected supplier is responsible for delivering the units to DLA Distribution DDSP in New Cumberland, Pennsylvania, ensuring all items are packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. Compliance with the Buy American Act and the Berry Amendment is mandatory for all materials used. Additionally, the contractor must maintain cybersecurity standards in accordance with NIST SP 800-171. The opportunity falls under NAICS code 332510 and is managed by the Department of Defense.
Hardware Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves supplying packaging materials and performing final marking for components to ensure they are fully prepared for shipment to Tinker AFB. All work must be executed in strict accordance with MIL-STD-129, MIL-STD-130N, and DLA requirement RP001, with additional compliance required for hazardous materials under TQ requirement IP025 when applicable. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the contract falls under NAICS code 488510. The place of performance is located at Tinker AFB, zip code 73145-8000. Interested parties should note the response deadline of November 4, 2026.
Freight Transportation Arrangement

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332813
New
DIBBS
NADCAP Accredited Special Process ServicesThis subcontract involves the provision of NADCAP accredited special process services for the DLA Weapons Support ASC Commodities Division, with performance taking place at Tinker AFB. The scope of work requires the execution of specialized aerospace processes, specifically heat treating, chemical processing, and Non-Destructive Testing, in strict accordance with Drawing 20145214 and requirement RQ040. To be eligible, the contractor must maintain NADCAP accreditation for all performed processes and hold JCP certification to ensure authorized access to necessary technical data. The final deliverables for this engagement include the processed aerospace components along with the corresponding certification reports.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Precision Machining and Fabrication of Aircraft Structural SupportsThis subcontract involves the precision machining and fabrication of six aircraft structural component supports for the DLA Weapons Support ASC Commodities Division, with performance taking place at Tinker AFB. The contractor is responsible for manufacturing components to strict dimensional tolerances in accordance with Drawing 43999 L2102067 and ASME Y14.31 standards, while implementing zero-based sampling plans as mandated by MIL-STD-1916. To qualify for the contract and gain necessary access to ITAR data, the provider must maintain ISO 9001:2015, CMMC Level 2, and JCP certifications. The project falls under NAICS code 336413 and requires adherence to rigorous Department of Defense quality and security specifications.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493110
New
DIBBS
Defense-Compliant Packaging and PalletizationThis subcontract involves providing specialized packaging and palletization services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the packaging of 64 bushing units using MIL-SPEC materials and equipment, ensuring strict adherence to ASTM D3951, MIL-STD-129, and RP001 palletization standards, as well as the DLA Master List of Technical and Quality Requirements. The completed units are to be marked and delivered to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. This requirement falls under NAICS code 493111 and is managed by the Department of Defense.
General Warehousing and Storage

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
Manufacture of Sleeve Bushings (NAS537B5P024)This subcontract involves the manufacture of 64 precision sleeve bushings, part number NAS537B5P024, for the DLA Weapons Support ASC Commodities Division. The project requires the use of traditional machining processes, as additive manufacturing is strictly prohibited. All materials used in production must adhere to the Buy American Act and the Berry Amendment to ensure domestic compliance. The selected contractor must hold ISO 9001:2015 and SAE AS9003 certifications to ensure quality standards are met. The final deliverable consists of 64 finished and inspected units to be performed at Tinker AFB. The response deadline for this requirement is November 4, 2026.
Machine Shops

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332722
Awarded
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE7LX27FA58F
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-27-T-5880
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A6-27-T-6338
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CLOSE TOLERANCE
Solicitation # SPE4A6-27-T-5999
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-27-T-6057
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-27-T-6130
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 332722
Awarded
DIBBS
SCREW, MACHINE
Solicitation # SPE4A0-27-T-0213
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

N/A
View Details
NAICS: 332722
Awarded
DIBBS
BOLT, CLOSE TOLERANCE
Solicitation # SPE4A627F1851
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
BOLT, CLEVIS
Solicitation # SPE4A6-27-T-6141
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-27-T-5860
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-27-T-6372
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 332722
Closed
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-27-T-3875
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

6 days ago

CLOSED

about 24 hours ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS