Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SCREW, EXTERNALLY RELIE

Active
SPE4A6-26-T-11ZHFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 94 screws with an externally relieved body, identified by NSN 5305-01-296-2846, under solicitation SPE4A6-26-T-11ZH, with a delivery deadline of 171 days from order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with the revision in effect at the solicitation issue date for simplified acquisitions. Packaging must adhere to DLA packaging standards, and non-accepted supplies must have government identification removed prior to return. Sampling and inspection procedures follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major unless otherwise stated. The item includes technical data subject to export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048, and access is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of DOD export-controlled data training, and approval by DLA to handle such data. The contract is issued by the Defense Logistics Agency’s ASC Commodities Division, with performance located in New Cumberland, PA, and all technical requirements are accessible through the DLA eProcurement portal.

General Info

94 screws procured under DLA solicitation, delivered in 171 days, with ITAR/EAR export controls and military quality standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11ZH.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
NYJEL KNOWLIN
contact@example.gov

Full Description

Show more
SCREW,EXTERNALLY RELIEVED BODY
SCREW, EXTERNALLY RELIEVED BODY,,
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire
SPE4A6-26-T-11ZH
SECTION B
(both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5305-01-296-2846 Quantity: 94 EA Purchase Request: 7017742651QTY: 94 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-913H
The contract pertains to the procurement of a single gasket with National Stock Number 5330-12-322-7856 and part number 5550740780, to be delivered in one unit under solicitation SPE7L1-26-T-913H. The item must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, particularly due to its use in Federal Supply Classes 5330/5331. Packaging must adhere to MIL-STD-2073-1E with specific preservation methods including dry preservation and cushioning material JB, and markings must comply with MIL-STD-129, including the special shelf-life code 32. The gasket is explicitly exempt from asbestos under FED-STD-313, and multiple manufacturer part numbers are acceptable as listed. Delivery is FOB destination with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The delivery window is twenty days from the award date, with an original required delivery date of July 31, 2026, and shipping must be by the fastest traceable means, excluding parcel post, to the designated FPO address via Vessel Shipment RDD 777. The contract incorporates all referenced technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or amendment date. Government use identifiers and shipping codes are provided for logistics tracking, and the primary point of contact is Kristina Derry at DLA Land and Maritime.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336411
New
DIBBS
BRACKET ASSEMBLY, MICROPHONE, OXYGEN MASK
Solicitation # SPE4A7-26-R-0713
The contract is for a Bracket Assembly, Microphone, Oxygen Mask with NSN 1660-011138365 and WSIC F, procured by DLA Aviation under solicitation SPE4A726R0713. It will be awarded as an indefinite quantity contract with a five-year base period and no options, targeting an annual quantity of 5,404 units, with minimum and maximum delivery order quantities of 1,056 and 5,404 units respectively. First Article Testing is mandatory, and the delivery timeline includes 150 days to submit test samples, 150 days for government evaluation and notification, followed by 195 days for production delivery, totaling 495 days. Inspection and acceptance occur at origin, with FOB origin terms. This is a DLA direct procurement and is not designated as a critical safety item. The solicitation is issued as a 100% small business set-aside, and awards will be based on equal weighting of price, past performance, and delivery, with final decisions possibly incorporating SPRS and other evaluation factors as detailed in the solicitation. Offers must be submitted in writing. The solicitation will be publicly posted on the DLA Internet Bid Board System (DIBBS) on or around August 4, 2026, with no paper copies available. Interested parties must access the full solicitation in PDF format via DIBBS, requiring Adobe Acrobat Reader. The response deadline for submissions is September 3, 2026. The point of contact is Thuy Ho at Thuy.Ho@dla.mil, with the issuing office located in Richmond, Virginia. The NAICS code is 336411, reflecting classification under Aircraft and Parts Manufacturing, and the contracting activity falls under the Department of Defense’s DLA Aviation.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336411
New
DIBBS
TURBINE WHEEL, AIRCR
Solicitation # SPE4A5-26-T-321G
The contract is for the procurement of 30 turbine wheels for aircraft applications, identified by part number 205424 and NSN 1660-00-594-7233, sourced from Honeywell International Inc. The item is classified as a commercial item and is designated as a critical application component, requiring strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other specifications. Compliance with MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and RP001 for palletization is mandatory, with all packaging subject to DLA’s overarching requirements. The contract mandates zero non-conformances in sampling under MIL-STD-1916 or equivalent zero-based plans, with attribute verification levels assigned per critical, major, and minor characteristics. Delivery is scheduled for 739 days after award, with FOB origin shipment terms and inspection and acceptance occurring at destination. The unit of issue is each, with no variance permitted in quantity. The delivery address is the DLA Distribution Depot in Tinker AFB, Oklahoma, and the need ship date is August 21, 2028, with an original required delivery date of November 1, 2028. Cybersecurity requirements include CMMC Level 2 self-assessment, and the contractor must comply with all applicable defense information handling standards. The item is not required to carry Unique Identification under DFARS 252.211-7003, as specified by the service customer. The contract was issued under solicitation SPE4A5-26-T-321G, with a response deadline of August 12, 2026, and is managed by the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
DISK, VALVE
Solicitation # SPE4A5-26-T-326T
This contract specifies the procurement of a metallic disc valve, identified by part number 2284W225 and NSN 1660997394942, with a quantity of 14 units. The item is subject to technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must comply with sampling protocols per MIL-STD-1916 or ASQ H1331, Table 1, using zero non-conformances unless otherwise stipulated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are treated as major. The supplier must adhere to DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization must follow DLA packaging requirements and be grouped in lots of 200 per intermediate container. The valve is to be delivered FOB origin within 171 days to Tinker AFB, Oklahoma, with no variance allowed in quantity and inspection and acceptance occurring at the destination. Cybersecurity requirements include CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. Unit of issue is each, and the contract includes transportation directives referencing DLAD procedural notes C19 and C20. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under NAICS code 336411, managed by the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-911M
The contract pertains to a single gasket item identified by NSN 5330-01-313-3578, with a required delivery within 20 days of award, and is classified as a commercial item including commercial of a type. It is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect on the solicitation issue date. The gasket must be packaged in a medium duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation, and this packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The item must be free of asbestos, and any alternative materials require approval per Clause L30 and Provision 4 conditions. The contractor must be CMMC Level 2 certified through a qualified third-party assessment organization, and all items must comply with MIL-STD-130N for identification marking of U.S. military property. Government identification must be removed from non-accepted supplies, and covered defense information handling is required. The solicitation, issued under SPE7L1-26-T-911M, has a response deadline of August 17, 2026, and performance is to occur in Huntsville, Alabama, with Kristina Derry listed as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336411
New
DIBBS
BODY, VALVE ASSEMBLY
Solicitation # SPE4A5-26-T-326P
The contract specifies the procurement of a BODY, VALVE ASSEMBLY with part number 2515W750 and NSN 1660995356040, requiring three units to be delivered FOB origin within 171 days, with a required ship date of January 31, 2027, and original delivery deadline of November 12, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. The item is not subject to Unit Unique Identification per DFARS 252.211-7003(c)(1)(i), and physical marking must follow RQ017. Acceptance occurs at destination with zero non-conformances required under sampling standards such as MIL-STD-1916 or ASQ H1331, and unspecified attributes are treated as major with an AQL of 1.0. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and all materials must adhere to DLA’s procurement and transportation directives including freight shipping to the DDSP New Cumberland Facility in Pennsylvania. The contract enforces a strict 0% variance on quantity and specifies inspection and acceptance points at the destination, with unit of issue as individual units and pricing set at $3.00 per unit.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-911D
The contract is for the procurement of one gasket with NSN/Part Number 5330-01-311-9345 under solicitation SPE7L1-26-T-911D, with a response deadline of August 17, 2026, and a delivery requirement of 20 days after delivery order. The item is subject to stringent technical and quality standards incorporated from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. The use of Class I ozone-depleting chemicals is strictly prohibited in the manufacture or incorporation of the gasket, and any substitute materials must be submitted for approval unless explicitly authorized by specification requirements. The contractor must be certified at Cybersecurity Maturity Model Certification Level 2 by a DLA-recognized third-party assessment organization, as the item involves covered defense information. Technical data associated with the gasket is subject to export controls under either ITAR or EAR, and disclosure to foreign persons, including foreign nationals within the U.S., is restricted. Access to this controlled data is limited to contractors with an approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and formal approval from DLA. The place of performance is Huntsville, Alabama, and primary point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336411
New
Federal
Drone Marketplace Onboarding of Group 3 UAS
Solicitation # W58RGZ-26-S-C001-0008
The U.S. Army Contracting Command – Redstone Arsenal is issuing an open-ended Commercial Solutions Opening to continuously identify, assess, and onboard innovative commercial Group 3 Uncrewed Aircraft Systems onto the Drone Marketplace over a five-year period. Group 3 UAS are defined as aircraft weighing between 55 and 1,320 pounds, operating up to 18,000 feet and at speeds under 250 knots, designed for missions including reconnaissance, surveillance, target acquisition, electronic warfare, communications relay, and cargo delivery. This initiative moves away from traditional acquisition models to a market-driven approach that empowers Soldiers to select the most capable and suitable systems based on mission needs. The program seeks platforms that are production-ready or at least at Technology Readiness Level 7, with lower TRL systems considered if they demonstrate a viable path to maturity. No production contracts or guaranteed orders are awarded during onboarding; instead, vendors are entered into a competitive pool where individual end-users initiate orders based on operational requirements and funding availability. Offerors must meet strict eligibility requirements including full compliance with NDAA Section 848 to exclude Chinese-manufactured components, active SAM.gov registration, a valid CAGE code, a completed NIST SP 800-171 assessment, and adherence to cybersecurity standards including CMMC and DFARS 252.204-7012. Submission follows a three-step process beginning with an Initial Capability Assessment, followed by continuous verification activities to validate system claims, and culminating in a full proposal for a Firm-Fixed-Price Basic Ordering Agreement. Success requires passing an initial review, a live or virtual flight demonstration, an NDAA compliance audit that may involve government-led system tear-downs, and submission of fair and reasonable pricing validated against commercial benchmarks. Systems that meet all criteria are onboarded as either Provisional or Cleared based on supply chain verification and ultimately compete for orders on the marketplace, where selection is based on capability, price, and lead time. The government reserves the right to make multiple, single, or no awards, cancel the call at any time without reimbursement for proposal costs, and use alternate contracting vehicles beyond the BOA. All submissions must include a comprehensive analysis of any actual or potential organizational conflicts of interest, and offerors acknowledge that non-government advisors may review proprietary data under NDA restrictions.
W6QK Acc-Rsa

POSTED

about 8 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 336411
New
Federal
Call for Solutions (CFS): Drone Marketplace Onboarding of US Payloads, Software, Components, and Enablers/Accessories
Solicitation # W58RGZ-26-S-C001-0007
The U.S. Army Contracting Command – Redstone Arsenal is seeking innovative commercial unmanned systems payloads, software, components, and accessories through a Commercial Solutions Opening under solicitation W58RGZ-26-S-C001-0007, with a response deadline of August 3, 2031. This initiative aims to onboard cutting-edge technologies onto the UAS Marketplace to enhance tactical capabilities at the Brigade, Corps, and Division levels by enabling rapid reconfiguration of unmanned platforms. The focus is on mission-critical payloads such as Electro-Optical/Infrared cameras, LiDAR, Synthetic Aperture Radar, Laser Designators and Rangefinders, Signals Intelligence and Electronic Warfare modules, secure communications relays, and modular cargo delivery systems that can be easily swapped to meet evolving operational needs without altering the underlying aircraft platform. The solicitation is open to commercial providers seeking to integrate their solutions into a scalable, interoperable ecosystem tailored for military use, with an emphasis on modular, adaptable, and field-ready technologies. All submissions must align with the objectives outlined in the accompanying Statement of Objectives and Components document. The contract is administered by the Department of Defense through the Office of ACC-RSA in Redstone Arsenal, Alabama, with primary point of contact Latoya Pryor and secondary point of contact Vaylen Ware, both reachable via the designated email address. The NAICS code 336411 identifies the industry as Aircraft Manufacturing, and the solicitation is actively accessible through the SAM.gov portal for eligible vendors.
W6QK Acc-Rsa

POSTED

about 8 hours ago

DEADLINE

in almost 5 years
View Details
NAICS: 336411
New
Federal
HH-60W Degraded Visual Environment System(DVES) - FA8552-26-R-B001
Solicitation # FA8552-26-R-B001
The United States Air Force is seeking a system to mitigate the risks associated with Degraded Visual Environments (DVE) for the HH-60W Jolly Green II helicopter, requiring a comprehensive solution that detects hazards in real time during both enroute and terminal phases of flight. This system must function reliably across diverse challenging conditions such as smoke, smog, snow, nighttime sand or dust storms, and aircraft-induced brownout and whiteout scenarios, delivering clear, actionable data to cockpit and cabin displays to enhance situational awareness and safety. The effort encompasses the full lifecycle of the Degraded Visual Environment System (DVES), including design, development, testing, integration, procurement, installation, and deployment of the required hardware and software kits, along with all non-recurring engineering necessary to adapt the system to the HH-60W platform. The contract will be structured with a 24-month base period and the potential to activate up to five additional ordering periods, creating a maximum possible duration of eight years. The solicitation, identified as FA8552-26-R-B001, was posted on June 23, 2026, with proposals due by July 15, 2026. It falls under NAICS code 336411 for aircraft manufacturing and carries no set-aside designation, representing an open competition. The contract office is located at Robins Air Force Base in Georgia, with primary point of contact Theresa Younce and secondary contact Millie Danko available for inquiries. Performance is expected to support Air Force operations globally, with the system intended to significantly improve operational capability and crew safety under adverse visual conditions.
FA8552 Aflcmc Wiu

POSTED

about 8 hours ago

DEADLINE

in 2 months
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-863J
The contract solicitation SPE7L1-26-T-863J seeks the procurement of six gaskets with NSN 5330-00-614-8048, to be delivered to the U.S. Coast Guard Air Station Barber’s Point in Kapolei, HI, within 20 days of award. The item must comply with strict packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including use of a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, and adherence to special marking code 20 for “Do not bend.” The gasket must be free of asbestos as defined in FED-STD-313, and all hazardous materials must be labeled in accordance with 29 CFR 1910.1200, unless exempted under specified federal statutes. Barcoding per MIL-STD-129 is mandatory for all shipments, and palletization must follow DLA’s RP001 Packaging Requirements. Inspection and acceptance will occur at destination under FAR 52.246-2, with the government retaining authority to reject nonconforming items. The contract mandates compliance with multiple DFARS and FAR clauses, including cybersecurity requirements under NIST SP 800-171, prohibitions on hexavalent chromium and covered defense telecommunications equipment, and obligations related to trafficking in persons, employment eligibility, and whistleblower rights. Offerors must be registered in SAM with a valid UEI and CAGE code, and must declare their small business status and socioeconomic classifications if applicable. All proposals must be submitted electronically via DIBBS by August 6, 2026, and any award will require electronic invoicing through WAWF. The contract type is not explicitly stated but is presumed to be fixed-price, consistent with DLA’s simplified acquisition procedures. No pricing data is available in the solicitation, as unit cost and total value will be determined post-award.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 336411
New
DIBBS
GEAR, BEVEL
Solicitation # SPE7L4-26-T-5783
The contract pertains to the procurement of a bevel gear with NSN 3020-01-393-5320 and part number 50006-1, supplied by MORPAC INDUSTRIES, INC, under solicitation SPE7L4-26-T-5783. A total of 19 units are required at a unit price of $19.00, resulting in a total contract value of $361.00. Delivery is scheduled for 168 days after order placement, with a need ship date of January 19, 2027, and an original required delivery date of November 29, 2026. All items must be delivered FOB origin to DLA San Joaquin in Tracy, CA, and are subject to inspection and acceptance at the destination. The gear must comply with DLA’s technical and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, with any revisions in effect on the solicitation issue date controlling for this simplified acquisition. Mercury or mercury-containing compounds are strictly prohibited unless specifically exempted, such as in functional batteries, fluorescent lamps, sensors, controls, weapon systems, or naval chemical reagents, with exempted items requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with specific preservation methods, materials, container types, and packaging codes, while marking must follow MIL-STD-129, including barcoding and special marking code 00-00 indicating no additional requirements. Palletization must meet DLA Packaging Requirements for Procurement RP001. The contract incorporates numerous Federal Acquisition Regulation clauses related to employment equity, trafficking in persons, hazardous material identification, sustainable products, electronic verification, and cybersecurity assessments per NIST SP 800-171, as well as transportation, subcontracting, safety notifications, and whistleblower rights. Compliance with hazard communication standards (29 CFR 1910.1200) is mandatory, and offerors must submit Safety Data Sheets and certify their size status and socioeconomic classification, including UEI and CAGE codes if applicable. All proposals must be submitted electronically via DIBBS by the August 6, 2026 deadline, and payment will be processed through Wide Area WorkFlow using DD Form 1
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Assessment Support
Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation Management
Administrative Management and General Management Consulting Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Production Lot Testing (PLT) Services
Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING SE
Solicitation # SPE4A6-26-T-11ZR
The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, SPHER
Solicitation # SPE4A6-26-T-12LE
This contract specifies the procurement of 14 spherical plain bearings under NSN 3120-01-576-6374 and part number 5136L017-1 from Circor Aerospace, Inc. DBA 50601, with delivery required within 264 days FOB origin. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Packaging, preservation, and marking must conform to MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, with specific preservation methods determined by bearing type and closure, as outlined in referenced tables and paragraphs. Protective lubricants and preservation controls are dictated by bearing specifications, and the contractor’s packaging facility must meet quality assurance verification criteria. Unit of issue is each, with zero tolerance for quantity variance, and inspection and acceptance occur at destination. Item Unique Identification is not required per customer request, and all marking must follow specified standards without special codes. The solicitation number is SPE4A6-26-T-12LE, issued by the ASC Commodities Division of the Department of Defense, with a response deadline of August 12, 2026, and performance location at Hill AFB, Utah.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details