This Solicitation opportunity from Department Of Defense was posted on May 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SCREW, MACHINE

Closed

SPE4A6-26-T-59D4Federal

Submission Closed05/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332112

New

SLED

Supply of Kennametal C23 Auger Drilling BitsThe contract involves the procurement and delivery of 20 long tons of Kennametal C23 auger drilling bits, which are compatible with C20 series blocks. These bits are to be packaged in buckets of 75 pieces each, ensuring standardized packaging for ease of handling and distribution. The solicitation was posted on June 12, 2026, with a response deadline set for June 18, 2026. This subcontract falls under the NAICS code 332112, which pertains to metal cutting and forming machine tool manufacturing. The contracting agency is Nashville Electric Service located in Tennessee, with the place of performance specified as Nashville. The contract does not specify any set-aside type or organization type requirements. While specific contact details are not provided, interested vendors are directed to submit their bids through the official vendor portal. This procurement aims to support the agency’s operational needs by ensuring a reliable supply of drilling bits essential for its ongoing or upcoming drilling projects.

Nashville Electric Service

POSTED

DEADLINE

Supply of BETEK B43/3 Auger Drilling Bits (Alternative Source)The contract involves the procurement and delivery of 20 long tons of BETEK B43/3 auger drilling bits, which are designed to be compatible with C20 series blocks. These drilling bits are to be packaged in buckets containing 75 bits each. The opportunity is posted by Nashville Electric Service, located in Nashville, Tennessee, and is classified under the NAICS code 332112, which covers metal forging services. The solicitation was announced on June 12, 2026, with a response deadline set for June 18, 2026. This contract is issued as a subcontract opportunity, aimed at securing an alternative source for the specified auger drilling bits. Additional details and submissions can be accessed through the provided vendor portal link associated with Nashville Electric Service.

Nashville Electric Service

POSTED

DEADLINE

Precision Metal Stamping & Forming – Transitions and StilesThis subcontract, issued by the Department of Defense's Navsup Fleet Logistics Center Puget Sound, calls for the manufacture of transition pieces and stiles that require precision metal stamping, forming, and bending operations according to specific architectural drawings identified as P-1020 and P-1035. The contract emphasizes high-quality fabrication processes to meet detailed design specifications, ensuring components are produced with accuracy and consistency. It is designated as a Total Small Business Set-Aside under FAR 19.5, highlighting the intent to award to qualified small businesses. The solicitation, categorized under NAICS code 332112 for metal stamping, was posted on June 12, 2026, with responses due by June 18, 2026. While specific location details for performance are not provided, the contract’s scope involves specialized manufacturing services crucial to supporting military or government infrastructure projects. The opportunity is accessible via a federal contracting portal, allowing eligible small business subcontractors to submit proposals for this precision manufacturing work.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

59--SWITCH,PRESSUREThe contract involves the procurement of 44 units of a pressure switch, identified by NSN 5930014404986, to be delivered to the Defense Logistics Agency (DLA) Distribution San Joaquin within 168 days after order. The approved source for this item is specified as 19278 222-10NB31-2223495. The solicitation is an electronic Request for Quote (RFQ), and quotes must be submitted electronically; no hard copies or physical documents like specifications or drawings are provided. This procurement is open to all responsible sources, with all timely submissions guaranteed consideration. The solicitation, numbered SPE7M826T4792, was posted on June 11, 2026, with a response deadline of June 22, 2026. The procurement falls under the NAICS code 332112 and is managed by the DLA Land and Maritime office located in Columbus, Ohio. Questions about the solicitation are to be directed via email to the designated buyer as noted in the solicitation document or through the provided DIBBS website link. This combined type contract does not specify any set-aside type or restrictions, ensuring a broad opportunity for interested suppliers to participate.

DLA Land And Maritime

POSTED

DEADLINE

PVC-Coated Stainless Steel Components SupplyThe contract concerns the supply of PVC-coated stainless steel wire and structural components specifically designed for cage construction, ensuring materials meet corrosion-resistant and food-safe standards. Issued by the Department of Agriculture under the USDA Agricultural Research Service, it is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, targeting qualified small business entities. The relevant NAICS code for this procurement is 332112, indicating a focus on fabricated structural metal manufacturing. The solicitation was posted on June 11, 2026, with a response deadline of June 24, 2026. Performance of the contract is expected to occur in Athens, with the ZIP code 30605 indicated as the place of performance. While specific contact details and exact office addresses were not provided, interested parties can find more information and submit their responses via the provided federal procurement system link. The contract aims to support durable, safe cage construction materials that align with stringent standards required for agricultural or related research environments.

USDA Ars Afm Apd

POSTED

6 days ago

DEADLINE

in 8 days

AI Contract Overview

This contract covers the procurement of 503 units of machine screws, identified by NSN 5305-00-995-2122, under solicitation number SPE4A6-26-T-59D4. The delivery is specified to occur within 165 days from the award date, with a required ship date of November 8, 2026, and original delivery by May 4, 2027. The contract mandates packaging in accordance with ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements. Inspections and acceptance will occur at origin, and the quantity tolerance is fixed at plus or minus 0%. Dimensional conformance for certain threaded components must comply with specific federal standards, and any hardware must meet or exceed the current revision of applicable military or consensus standards. Quality assurance provisions require sampling and verification of attributes per MIL-STD-1916 or equivalent plans, with zero tolerance for non-conformances unless otherwise noted. Identification markings are to follow MIL-STD-130N guidelines, and unacceptable items must have all government identification removed. The contract is handled by the Department of Defense’s ASC Commodities Division, with delivery to the DLA Distribution Center in Tracy, California. The primary point of contact for this procurement is Charece Smith. This solicitation aligns with NAICS code 332112, indicating manufacturing of turned products such as screws, bolts, and similar metal fasteners.

General Info

Procurement of 503 machine screws, strict packaging, inspection, zero tolerance, delivery by November 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332112 - Nonferrous Forging View NAICS

Place of Performance

PR: 7016752625 PRLI: 0001 CONT’D, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-59D4 DLA Aviation May 18 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 17

Solicitation

Response DeadlineMay 26

Deadline has passed

Submission Closed

05/26/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

Office AddressUS

Contacts

Charece Smith

contact@example.gov

+1 (555) 000-0000

Full Description

SCREW,MACHINE
SCREW, MACHINE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Unless otherwise stated, identification marking shall be in accordance with paragraph 4.1.b(2) of MIL-STD-130N. This is in addition to any required manufacturer's logo, lot number, and material identification markings.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
SPE4A6-26-T-59D4
SECTION B
GAUGING REQUIREMENTS AS FOLLOWS
ALL CLASS 3A AND 3B THREADS WILL BE INSPECTED
FOR DIMENSIONAL CONFORMANCE IN ACCORDANCE WITH
SYSTEM 22 OF FED-STD-H28/20. THIS EXCLUDES
SELF-LOCKING NUTS, INTERNAL THREADS SMALLER
THAN .190 INCH DIA AND EXTERNAL THREADS SMALLER
THAN .138 INCH DIA.
CRITICAL APPLICATION ITEM
IAW BASIC NON GOVT STD NAS600 THRU 606
REVISION NR 11 DTD 10/31/2018
PART PIECE NUMBER: NAS601-30P
IAW REFERENCE NON GOVT STD NASM7839
REVISION NR 1 DTD 08/26/2011
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016752625 0001 EA 503.000
NSN/MATERIAL:5305009952122
DELIVERY (IN DAYS):0165
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
SPE4A6-26-T-59D4
SECTION B
PR: 7016752625 PRLI: 0001 CONT’D
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:11/08/2026 Original Required Delivery Date:05/04/2027
SPE4A6-26-T-59D4 NSN/Part Number: 5305-00-995-2122 Quantity: 503 EA Purchase Request: 7016752625QTY: 503 Delivery: 165 days ADO