This Solicitation opportunity from Department Of Defense was posted on May 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BOLT, MACHINE

Closed

SPE4A6-26-T-49B8Federal

Submission Closed05/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332112

New

Federal

53--BOLT,MACHINEThe contract is a procurement solicitation for 60 units of NSN 5306014566917 BOLT, MACHINE, intended for delivery to DLA Distribution location W1A8 within 171 days after order. The approved source for this item is identified as 16258 SLB487A4-18. This procurement is conducted as a Request for Quote (RFQ), with all quotes requiring electronic submission and consideration of any responsible source that submits timely responses. The solicitation does not provide specifications, plans, or drawings and is accessible only electronically through the provided link. This acquisition is designated as a Service-Disabled Veteran-Owned Small Business (SDVOSBC) set-aside under NAICS code 332112. The contract is managed by DLA Aviation, part of the Department of Defense, through its Richmond, VA office. Interested parties seeking further details or with inquiries should contact the listed buyer via email as indicated in the solicitation documents or use the online portal for access to the solicitation and submission of quotes. The deadline for submitting responses is June 24, 2026.

POSTED

DEADLINE

Supply of BETEK B43/3 Auger Drilling Bits (Alternative Source)The contract involves the procurement and delivery of 20 long tons of BETEK B43/3 auger drilling bits, which are designed to be compatible with C20 series blocks. These drilling bits are to be packaged in buckets containing 75 bits each. The opportunity is posted by Nashville Electric Service, located in Nashville, Tennessee, and is classified under the NAICS code 332112, which covers metal forging services. The solicitation was announced on June 12, 2026, with a response deadline set for June 18, 2026. This contract is issued as a subcontract opportunity, aimed at securing an alternative source for the specified auger drilling bits. Additional details and submissions can be accessed through the provided vendor portal link associated with Nashville Electric Service.

Nashville Electric Service

POSTED

DEADLINE

Supply of Kennametal C23 Auger Drilling BitsThe contract involves the procurement and delivery of 20 long tons of Kennametal C23 auger drilling bits, which are compatible with C20 series blocks. These bits are to be packaged in buckets of 75 pieces each, ensuring standardized packaging for ease of handling and distribution. The solicitation was posted on June 12, 2026, with a response deadline set for June 18, 2026. This subcontract falls under the NAICS code 332112, which pertains to metal cutting and forming machine tool manufacturing. The contracting agency is Nashville Electric Service located in Tennessee, with the place of performance specified as Nashville. The contract does not specify any set-aside type or organization type requirements. While specific contact details are not provided, interested vendors are directed to submit their bids through the official vendor portal. This procurement aims to support the agency’s operational needs by ensuring a reliable supply of drilling bits essential for its ongoing or upcoming drilling projects.

Nashville Electric Service

POSTED

DEADLINE

Precision Metal Stamping & Forming – Transitions and StilesThis subcontract, issued by the Department of Defense's Navsup Fleet Logistics Center Puget Sound, calls for the manufacture of transition pieces and stiles that require precision metal stamping, forming, and bending operations according to specific architectural drawings identified as P-1020 and P-1035. The contract emphasizes high-quality fabrication processes to meet detailed design specifications, ensuring components are produced with accuracy and consistency. It is designated as a Total Small Business Set-Aside under FAR 19.5, highlighting the intent to award to qualified small businesses. The solicitation, categorized under NAICS code 332112 for metal stamping, was posted on June 12, 2026, with responses due by June 18, 2026. While specific location details for performance are not provided, the contract’s scope involves specialized manufacturing services crucial to supporting military or government infrastructure projects. The opportunity is accessible via a federal contracting portal, allowing eligible small business subcontractors to submit proposals for this precision manufacturing work.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

59--SWITCH,PRESSUREThe contract involves the procurement of 44 units of a pressure switch, identified by NSN 5930014404986, to be delivered to the Defense Logistics Agency (DLA) Distribution San Joaquin within 168 days after order. The approved source for this item is specified as 19278 222-10NB31-2223495. The solicitation is an electronic Request for Quote (RFQ), and quotes must be submitted electronically; no hard copies or physical documents like specifications or drawings are provided. This procurement is open to all responsible sources, with all timely submissions guaranteed consideration. The solicitation, numbered SPE7M826T4792, was posted on June 11, 2026, with a response deadline of June 22, 2026. The procurement falls under the NAICS code 332112 and is managed by the DLA Land and Maritime office located in Columbus, Ohio. Questions about the solicitation are to be directed via email to the designated buyer as noted in the solicitation document or through the provided DIBBS website link. This combined type contract does not specify any set-aside type or restrictions, ensuring a broad opportunity for interested suppliers to participate.

DLA Land And Maritime

POSTED

6 days ago

DEADLINE

in 5 days

AI Contract Overview

The contract is for the procurement of three units of machine bolts, identified by NSN 5306-01-381-9923, with a delivery requirement of 313 days from the contract award date. The items must comply with specific technical and quality standards as detailed in the DLA Master List of Technical and Quality Requirements, referencing MIL-STD-1916 and ASQ H1331 for sampling and inspection. Packaging and marking requirements align with MIL-STD-2073-1E and MIL-STD-129 respectively, with no specified special markings. The government mandates that mercury or mercury-containing compounds shall not be intentionally used or come into contact with the hardware, except in certain exceptions like batteries or sensors, consistent with NAVSEA standards. Delivery is FOB origin, with inspection and acceptance at the destination, specifically the DLA Distribution San Joaquin warehouse in Tracy, California. The contract stresses strict adherence to packaging and palletization procedures per DLA requirements, and there is a strict quantity variance of zero percent allowed. Reporting and unit identification follow DFARS regulations, but item unique identification is waived at the customer's request. The solicitation was issued by the Department of Defense's ASC Commodities Division under NAICS code 332112 and includes a primary contact for inquiries. The delivery and shipping instructions, as well as relevant procurement procedures, are tightly controlled to ensure compliance and timely fulfillment by the stipulated delivery date of March 25, 2027.

General Info

Procurement of three machine bolts, technical standards compliance, delivery in 313 days, zero variance.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332112 - Nonferrous Forging View NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-49B8 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 15

Solicitation

Response DeadlineMay 20

Deadline has passed

Submission Closed

05/20/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

Office AddressUS

Contacts

Monica Clark

contact@example.gov

+1 (555) 000-0000

Full Description

BOLT,MACHINE
BOLT, MACHINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
GENERAL ELECTRIC CO (07482) CINCINNATI, OH P/N L34976P110
LONG-LOK LLC 16941 P/N T1227-P110
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE4A6-26-T-49B8
SECTION B
PR: 7016707799 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016707799 0001 EA 3.000
NSN/MATERIAL:5306013819923
DELIVERY (IN DAYS):0313
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:BD OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:03/25/2027 Original Required Delivery Date:03/25/2027
SPE4A6-26-T-49B8
SECTION B
PR: 7016707799 PRLI: 0001 CONT’D
SPE4A6-26-T-49B8 NSN/Part Number: 5306-01-381-9923 Quantity: 3 EA Purchase Request: 7016707799QTY: 3 Delivery: 313 days ADO