Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW, MACHINE

Active
SPE4A6-26-T-06YZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 50 machine screws identified by NSN 5305012167371 under solicitation SPE4A6-26-T-06YZ, with a required delivery date of October 27, 2026, and a delivery window of 162 days FOB origin. All supplies must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129, with no special marking needed. The screws must not contain or come into direct contact with mercury or mercury compounds except in specified exceptions such as functional components in batteries, lamps, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA, and any portable fluorescent lamps or instruments containing mercury must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. The items must be packed, palletized, and labeled per DLA packaging guidelines, delivered to the Tinker AFB distribution depot in Oklahoma, and are subject to a strict zero percent quantity variance. The contract mandates adherence to the NAS1802 and NAS4003 standards and includes specific unit of issue and transportation instructions as outlined in DLA procedural notes.

General Info

Procure 50 NSN 5305012167371 screws, deliver by Oct 27, 2026, FOB origin, comply with MIL-STD and NAVSEA mercury rules.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-06YZ for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
MICHAEL BLAIN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW,MACHINE
SCREW,MACHINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev A Gen 1 IAW BASIC NON GOVT STD NAS1802 REVISION NR 10 DTD 06/30/2022 PART PIECE NUMBER: NAS1802-6-20
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD NAS4003 REVISION NR 13 DTD 12/18/2015 PART PIECE NUMBER:
SPE4A6-26-T-06YZ
SECTION B
PR: 7017409818 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017409818 0001 EA 50.000
NSN/MATERIAL:5305012167371
DELIVERY (IN DAYS):0162
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:01/03/2027 Original Required Delivery Date:10/27/2026
SPE4A6-26-T-06YZ
SECTION B
PR: 7017409818 PRLI: 0001 CONT’D
SPE4A6-26-T-06YZ NSN/Part Number: 5305-01-216-7371 Quantity: 50 EA Purchase Request: 7017409818QTY: 50 Delivery: 162 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EXThis contract is for the procurement of 12,382 self-locking, extended washer hexagon nuts with NSN 5310-00-807-1474 under a Firm Fixed Price Indefinite Delivery Purchase Order (IDPO) with a three-year base period and no options, subject to a total maximum contract value of $1,000,000. The delivery is due 405 days after award, with FOB origin terms, and the item is designated by the Navy as a Critical Safety Item requiring strict compliance with quality and sourcing controls. The nuts must conform to NASM21042 Revision 3 and NASM25027 Revision 1, alongside comprehensive technical and quality requirements from the DLA Master List, with inspection and acceptance performed at origin. Sampling must adhere to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with verification levels assigned as VII for critical, IV for major, and II for minor attributes, and unspecified attributes treated as major. All items must be marked per MIL-STD-129, including lot and serial numbers, contractor and actual manufacturer CAGE codes, and part numbers, with packaging compliant with MIL-STD-2073-1E and DLA Packaging Requirements, and no mercury or mercury compounds permitted except under specific exceptions for functional uses in batteries, instruments, weapon systems, or NAVSEA-specified reagents, with portable devices requiring shock-proofing and secondary containment. The contract mandates adherence to multiple federal and defense acquisition regulations, including clauses on termination, excusable delays, changes, and prohibitions on certain telecommunications equipment, and requires electronic invoicing via WAWF. Offerors must be registered in SAM and complete required representations, including certifications regarding foreign ownership, export control, and inverted domestic corporations, with a deviation applied to 52.204-19. Export-controlled technical data subject to ITAR or EAR is involved, limiting participation to contractors with approved US/Canada Joint Certification Program credentials, completed DLA export training, and DLA authorization. Only small businesses are eligible under a total small business set-aside, and the award will be based on a best-value determination weighing price, past performance, and delivery performance, with past performance—particularly PIPRS assessments, quality history, and delivery compliance—weighed more heavily than quoted delivery. The contractor must maintain an approved inspection system
ASC COMMODITIES DIVISION

POSTED

in 34 minutes

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
STUD, WELDINGThe contract specifies the procurement of a welding stud, identified by NSN 5307-00-257-1528 and part number M24149/1-307, in a quantity of one HD, with delivery required within 20 days FOB destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements RP001, with adherence to MIL-STD-1916 or ASQ H1331 for sampling and inspection, where zero non-conformances are required unless otherwise stated. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The item must be physically marked as per RQ017 and government identification removed from non-accepted supplies per RQ011. Measuring and test equipment must meet RT001 standards. Delivery is to FPO AP 96657-2615, with transportation governed by DLAD PROC NOTES C19 and C20. The solicitation number is SPE4A5-26-T-292S, issued under NAICS code 332722 by the Department of Defense, with a response deadline of July 24, 2026, and an original required delivery date of January 14, 2025.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEADThe contract specifies the procurement of 290 units of screw, cap, socket head with NSN 5305-01-029-6363 under solicitation SPE4A6-26-T-04XW, with a required delivery date of November 21, 2026, and a lead time of 170 days. All items must be manufactured to comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, including specific standards for packaging, identification, and sampling. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, and all markings must be in accordance with RQ017. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Acceptance is zero non-conformances unless otherwise stated. The item must be delivered FOB origin to the designated DLA Distribution Depot in Tinker AFB, Oklahoma, with no variance allowed in quantity. Defense information provisions apply, and the unit of issue is each, with packaging and labeling strictly controlled under contract specifications.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCKThe contract pertains to the procurement of 141 units of WASHER, LOCK with NSN 5310-01-618-2973 under solicitation SPE4A6-26-T-07EY, issued by the Department of Defense’s ASC Commodities Division. The item must be delivered FOB origin within 247 days of contract award, with a required ship date of March 29, 2027, and a final delivery deadline of October 14, 2026. The unit price is $141.00, with no variance allowed in quantity. Inspection and acceptance are to occur at the destination facility located at Tracy, California, and packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering strictly to DLA Packaging Requirements for Procurement. All technical and quality standards referenced by R or I numbers in the DLA Master List of Technical and Quality Requirements take precedence over any other specification. Sampling shall follow MIL-STD-1916 or ASQ H1331 Table 1 using zero defect acceptance criteria unless otherwise defined, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. The item must be bare marked with physical identification as required, and government identification must be removed from non-accepted supplies. All documentation, labeling, and unit of issue must conform to the DLA contract specifications.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThis contract specifies the procurement of a flat washer identified by NSN 5310015134647 and part number GBV-F2-80-0001 from B N L Industries Inc, with a single unit quantity requiring delivery within 120 days from the contract date. The item is designated as a critical application item, subject to stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA packaging requirements, and all items must be labeled and marked per physical identification standards. Sampling and inspection follow MIL-STD-1916 or comparable zero-based methods, with zero non-conformances required unless otherwise stated, and critical attributes are verified at verification level VII. The item has no shelf life requirement and does not require Item Unique Identification per customer request. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The unit of issue is each, and no quantity variance is permitted. The required ship date is November 22, 2026, with an original delivery deadline of October 14, 2026. All transportation and shipping protocols must adhere to DLAD Proc Notes C19 and C20, and the purchasing request number is 7017529398 under solicitation SPE4A6-26-T-07CU.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details