Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW, MACHINE

Active
SPE4A6-26-T-06EVFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a machine screw identified by part number 34106584-001 and NSN 5305016309982, with a total quantity of two units to be delivered within 171 days from the required delivery date of May 20, 2027. All items must comply with stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, employing zero-defect acceptance criteria unless otherwise stated. The screws must be packaged per MIL-STD-2073-1E with preservative method 31, dry and clean, using packaging code U and marked according to MIL-STD-129 with no special marking code. Palletization must follow DLA packaging standards, and delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The contract applies stringent variance controls with zero tolerance for quantity deviations and mandates compliance with DLA transportation procedures. All items are subject to verification of critical, major, and minor attributes using specified verification levels or AQLs, and the manufacturer may choose attribute or variable inspection methods under MIL-STD-1916. The solicitation was issued under SPE4A6-26-T-06EV with a response deadline of July 22, 2026, and is associated with NAICS code 332722 under the Department of Defense’s ASC Commodities Division.

General Info

Two machine screws, part 34106584-001, delivered by Oct 17, 2027, per MIL-STD and DLA specs, FOB origin.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-06EV.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Vincent Price
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW,MACHINE
SCREW,MACHINE
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
HONEYWELL INTERNATIONAL INC. 0BFA5 P/N 34106584-001
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017486384 0001 EA 2.000
NSN/MATERIAL:5305016309982
DELIVERY (IN DAYS):0171
SPE4A6-26-T-06EV
SECTION B
PR: 7017486384 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/10/2027 Original Required Delivery Date:05/20/2027
SPE4A6-26-T-06EV NSN/Part Number: 5305-01-630-9982 Quantity: 2 EA Purchase Request: 7017486384QTY: 2 Delivery: 171 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEADThis contract specifies the procurement of 491 units of a hexagon head cap screw with part number MS35307-411S316 and NSN 5305014483286 under solicitation SPE4A6-26-T-06JD. The item must comply with stringent technical and quality requirements referenced from the DLA Master List, including mandatory adherence to MIL-STD-1916 or a comparable zero-based sampling plan with zero non-conformances unless otherwise stated, and requires critical attribute verification at Level VII or an AQL of 0.1. The screw must be manufactured under TDP Revision B General 2 in accordance with NASM35307 Revision 2 dated 03/31/2015 and must not contain intentionally added mercury or mercury compounds except in exempted functional applications such as batteries, fluorescent lights, sensors, and weapon systems, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Packaging must follow MIL-STD-2073-1E and RP001, with each fastener individually protected by a wrap or sleeve along its full shank and threads, and all packaging and marking must conform to MIL-STD-129 with no special marking required. Delivery is FOB origin with a 187-day lead time, required by July 14, 2026, and final acceptance occurs at the destination facility in New Cumberland, Pennsylvania. The unit of issue is each, with no quantity variance permitted, and transportation and shipping are governed by DLA procedural notes C19 and C20. The contract imposes tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers and prohibits removal of government identification from non-accepted supplies. All documentation and technical specifications referenced are controlled by the version effective on the solicitation issuance date, with additional compliance obligations tied to defense information and physical item marking standards.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHOULDERThe contract is for the procurement of a shoulder bolt with NSN 5306015918660 and part numbers including C9507-10049, issued under solicitation SPE4A6-26-T-06HA by the Defense Logistics Agency. The item must comply with all applicable technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling. Manufacturing and non-manufacturing suppliers are subject to tailored higher-level quality requirements, and configuration changes require formal engineering change proposals or variance requests. Inspection and acceptance occur at origin, with sampling governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes must meet verification levels VII and AQL 0.1. Packaging must conform to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements for Procurement. The contract mandates Cybersecurity Maturity Model Certification Level 2 compliance, source approval documentation, and removal of government identification from non-accepted items. A single unit is ordered for delivery within 432 days, FOB origin, with no quantity variance permitted. The item is designated a critical application item and requires first article testing, with one unit allocated for this purpose under FAR clause 52.209-4; pricing must be provided for the test unit, though no award will be made if the test is waived. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with shipping instructions referenced in DLAD Proc Notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLATEThe contract pertains to the procurement of 1,281 self-locking plate nuts with NSN 5310-01-172-8788 under solicitation SPE4A6-26-T-05YW, issued by the Department of Defense’s ASC Commodities Division. The item is designated as a critical application component, with approved sources limited to Goodrich Corp (CAGE 99551, part number 2493653 Rev F) and SPS Technologies LLC (CAGE 80539, part number 13705-048). All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and DLA’s packaging requirements, with items to be packed per ASTM D3951 only if not contradicted by DLA requirements. Sampling inspections must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stipulated, and attributes are to be classified with specific verification levels or AQLs per defined criteria. Delivery is FOB origin with inspection and acceptance occurring at destination, within 146 days of contract award, with a firm delivery date of February 23, 2027 and a needed ship date of November 18, 2025. No quantity variance is permitted. Packaging and labeling must conform to specified DLA requirements including palletization per RP001, and all items must be marked in accordance with RQ017 for physical identification. The unit of issue is each (EA), and all documentation must adhere to the DLA’s authorized unit of issue guidelines. Transportation instructions are governed by DLAD Proc Notes C19 and C20, with delivery addressed to the DLA Distribution facility in New Cumberland, PA. The contract includes provisions for covered defense information and requires compliance with all source control data, documentation, and marking obligations as outlined in the referenced DLA standards and approved source listings.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANThe contract is for 194 close-tolerance screws identified by NSN 5305-01-510-6782 and part number TX1026V4-30A, with equivalent parts from multiple qualified suppliers including SPS Technologies, Hi-Shear Corporation, ARCONIC, and others. The item is classified as a critical application component requiring strict adherence to MIL-STD-130N for identification marking of U.S. military property. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede industry standards such as ASTM D3951. Packaging must comply with MIL-STD-129 labeling and RP001 DLA packaging standards, with palletization following DLA guidelines. The unit of issue is each (EA), with zero variance allowed in quantity. Delivery is FOB origin with a 77-day lead time, and the item must be delivered to DLA Distribution Jacksonville at the specified physical address by October 8, 2026, though the original required delivery date is February 22, 2027. Inspection and acceptance occur at the destination. Transportation is subject to DLAD Proc Notes C19 and C20, and the contracting office is the ASC Commodities Division under the Department of Defense. The solicitation number is SPE4A6-26-T-06BG, issued on July 14, 2026, with responses due by July 22, 2026, and the primary point of contact is Vincent Price.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEADThe item specified is a screw, cap, hexagon head with NSN/part number 5305-01-483-6499, with a quantity of 18 units required under purchase request 7017486563. Delivery is due in 171 days after the award date. The solicitation, issued by the ASC Commodities Division under the Department of Defense, has the number SPE4A6-26-T-06CN, was posted on July 14, 2026, and requires responses by July 22, 2026. The contract falls under NAICS code 332722 and is categorized as a federal procurement with performance at New Cumberland, Pennsylvania, zip 17070-5002. Primary point of contact is Antonia Willcox, reachable via email and phone provided. This item is associated with technical data subject to U.S. export control regulations under either ITAR or EAR, meaning any disclosure to foreign persons, regardless of location, constitutes an export requiring prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, restricting access to contractors who hold valid U.S./Canada Joint Certification Program certification, have completed required DOD export-controlled data training and the DLA questionnaire, and have received explicit approval from the DLA controlling authority. Access is limited to qualified DLA contractors meeting all stated compliance conditions.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details