Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Solicitation opportunity from Tennessee was posted on February 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Screws

Closed
Z3819State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722
New
DIBBS
SETSCREW
Solicitation # SPE4A6-27-T-7006
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-27-T-7186
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A6-27-T-7014
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
NUT, PLAIN, EXTENDED WAS
Solicitation # SPE4A6-27-U-0154
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 15 days
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A0-27-T-0354
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-27-U-0372
DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 15 days
NAICS: 332722
New
DIBBS
BOLT, SHOULDER
Solicitation # SPE4A0-27-T-0361
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A0-27-T-0352
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-27-T-7120
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-24UD
Solicitation SPE4A6-26-T-24UD is a request for the procurement of 397 machine screws, identified by NSN 5305016513531, for the DLA Aviation ASC Commodities Division. The contract is established as FOB Origin with destination inspection and acceptance. Delivery is required within 144 days, with an original required delivery date of December 7, 2026, and a need ship date of January 31, 2027. All shipments must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Quality assurance is a critical component of this procurement, requiring a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Manufacturers must maintain an inspection system complying with SAE AS9003 or ISO 9001. The contract mandates adherence to MIL-STD-130N for item marking, MIL-STD-129 for packaging labels, and ASTM D3951 for general packaging, with DLA Master List requirements taking precedence. Sampling shall follow MIL-STD-1916 or ASQ H1331, with a zero non-conformance requirement for acceptance. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and HUBZone price evaluation preferences. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Offerors are encouraged to provide quantity ranges in their quotes via the DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 2 days
NAICS: 332722
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-27-T-7264
Solicitation SPE4A6-27-T-7264 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 175 blind rivets under NSN 5320-01-685-1661. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania within 44 days after receipt of order, with shipping terms specified as FOB Origin. Inspection and acceptance will occur at the destination. The procurement is subject to strict quality and technical standards, incorporating the DLA Master List of Technical and Quality Requirements and utilizing sampling methods based on MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and RP001, while marking must adhere to MIL-STD-129 and RQ017. Additionally, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved JCP certification and specific DLA authorizations. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and CMMC Level 2 cybersecurity standards. Offerors must also comply with equal opportunity regulations and restrictions on covered telecommunications equipment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-27-T-7251
Solicitation SPE4A6-27-T-7251 is issued by the DLA Weapons Support ASC Commodities Division for the procurement of 2,000 flat washers, identified by NSN 5310009143234 and part number S8157N8-010. The contract is for a commercial item with a required delivery date of October 27, 2026, and a delivery lead time of 96 days after receipt of order. Shipping is established as FOB Origin, with the final destination being the DLA Distribution Depot Hill at Hill AFB, Utah. Inspection and acceptance will occur at the destination. The contractor must adhere to strict quality and technical standards, including MIL-STD-130N for property identification and MIL-STD-129 for shipment marking. Packaging must comply with ASTM D3951 and RP001, with a specified quantity per unit pack of 025. Quality assurance will be managed via sampling methods such as MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including Buy American Act requirements, CMMC Level 2 cybersecurity certification, and price evaluation preferences for HUBZone small businesses. Offers produced via additive manufacturing are ineligible for award.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

The contract involves the procurement of stainless steel screw-type sealing rings, specifically band meters, with approved manufacturers including Ekstrom (catalog number 10-9090) and DeWalch (2221-1). The solicitation, titled "Screws," was issued by the Nashville Electric Service under the Tennessee state-level organization, with the solicitation number Z3819. The posting date was February 6, 2026, with a response deadline set for February 11, 2026. The contract is focused on sourcing these specific screws for use within the Nashville, Tennessee area, aligning with local supply needs. The primary point of contact for this solicitation is Alan Martinez, the procurement contact, who can be reached via email or phone for clarifications. The solicitation is accessible through the Nashville Electric Service vendor portal, where interested parties can submit their bids within the specified timeframe.

General Info

Procurement of stainless steel screw sealing rings for Nashville Electric Service, bids due February 11, 2026.

Agency

Tennessee → Nashville Electric Service

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

1

RFB Z3819 Band Meter Screw Type Stainless Steel

PDF, High priority: read this firstrfb
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, USA
Organization / AgencyTennessee → Nashville Electric Service
Office AddressNashville, TN, USA
Contacts
Alan MartinezProcurement Contact
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BAND METER SCREW TYPE STAINLESS STEEL SCREW TYPE SEALING RING Approved Manufacturers and/or Part Numbers: EKSTROMCAT.#10-9090 DEWALCH2221-1

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 484220
New
SLED
Specialized Flatbed/Open-Top Transport for Steel PolesThis subcontract involves the specialized transport of five 30-foot steel poles for prime contractors working on Nashville Electric Service projects in Nashville. The selected provider must utilize an open-top vehicle to facilitate efficient unloading and is strictly required to keep the poles wrapped throughout transit to protect the factory-applied dark bronze finish. The primary objective is the delivery of the shafts to the designated site in a condition that preserves the integrity of the factory finish. This opportunity falls under NAICS code 484220, with a response deadline set for November 3, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332323
New
SLED
Supply of Standard Steel Square Straight Shafts (30')This subcontract involves the manufacture and delivery of five 30-foot standard steel square straight shafts for prime contractors working on Nashville Electric Service projects in Nashville. Each shaft must be constructed with four-hole anchor bases, two detachable 2 inch IPS horizontal tenons, and a factory-applied dark bronze finish. To ensure structural integrity, all poles are required to comply with NESC 90 MPH wind load requirements. The completed shafts must be delivered wrapped to protect the finish. This procurement opportunity is categorized under NAICS code 332323, with a response deadline set for November 3, 2026.
Ornamental and Architectural Metal Work Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
New
SLED
Steel Pole
Solicitation # Z5432
Nashville Electric Service has issued Request For Bid Z5432 for the procurement of five 30-foot standard steel square straight shafts. The poles must feature a four-hole anchor base with a bolt circle between 10.5 and 11.5 inches, base nut covers, and a hand hole access of at least 3.5 by 5 inches with a cover. Each shaft must be factory-applied in dark bronze and equipped with two detachable 2-inch IPS horizontal tenons for luminaire mounting. Technical requirements specify that the poles must comply with the NESC 90 MPH wind load requirement and possess the strength to support two 50lb fixtures at 180 degrees with an EPA of 2.5 square feet each on a 10-inch arm. Bids must be submitted via the Bid Center by 2:00 pm local time on November 3, 2026. Only approved brands, specifically Hapco and Lytepole, are acceptable, and alternate brands will not be considered. To ensure quality and ease of unloading, poles must be wrapped to protect the finish during shipment and delivered using an open-top vehicle. Vendors are required to state their earliest delivery in calendar days, as delivery time may be a factor in the award decision. The primary procurement contact for this solicitation is Shanna Faulk.

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
SLED
Supply of Figure 8 Swing Links (30K lbs)This subcontract agreement involves the supply of forged steel Figure 8 swing chain links for prime contractors working under Nashville Electric Service contracts. The required components must feature two 7/8 inch eyes, possess an ultimate strength of 30,000 pounds, and be galvanized in accordance with ASTM A123 standards. All deliverables must strictly adhere to specified brand and part number requirements for ItemId 182574500. The contract is managed by the Nashville Electric Service in Tennessee, with the place of performance located in Nashville. Interested parties must respond by October 29, 2026, regarding this procurement categorized under NAICS code 332510.
Hardware Manufacturing

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 423830
New
SLED
Supplier of 3M Safety Walk Anti-Slip RollsThis subcontract agreement involves the procurement and delivery of industrial anti-slip safety walking surfaces for prime contractors serving the Nashville Electric Service in Tennessee. The scope of work specifically requires the supply of 3M-AUTO 19282 Safety Walk Black Medium Grade rolls, or an approved equivalent, measuring 6 inches by 60 feet. The selected supplier is responsible for the physical delivery of the grip tape rolls to the designated facility in Nashville, ensuring strict adherence to established delivery timelines. This opportunity is categorized under NAICS code 423830 and is managed through the Nashville Electric Service vendor portal.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 334418
New
SLED
Supply of 3P.S.T. Back Connected Knife SwitchesThis subcontract involves the supply and delivery of industrial electrical knife switches for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work specifically requires the provision of AVO MULT MTS S-203-D-B units configured as 3P.S.T. back connected. These units must include BC barriers, ganged handles, dividers, and TBT-26 long studs, though mounting bars are excluded from the delivery requirements. The procurement is categorized under NAICS code 334418. Interested parties should note that the posting date is October 23, 2026, with a response deadline set for October 30, 2026. All physical 3P knife switch units must be delivered in accordance with the specified technical configurations to support the agency's infrastructure projects.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 314121
New
SLED
Lineman's Rubber Glove ProtectorsThis subcontract involves the manufacture and supply of size 9 leather protector gloves for prime contractors working on Nashville Electric Service safety equipment projects. The gloves must be designed for use with 5,000 volt rubber gloves and strictly adhere to Federal Specification KK-L-170C and ASTM Specification F696-91. Each pair must be individually plastic-bagged and stamped on the cuff with the rubber glove hand size, the manufacturer name, and the NES designation. The scope of work requires the delivery of 24 pairs of these marked protector gloves to Nashville. This opportunity is categorized under NAICS code 314121 and is managed by the Nashville Electric Service in Tennessee. Interested parties should note the response deadline of October 30, 2026.
Curtain and Drapery Mills

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 484220
New
SLED
Flatbed Hauling and Unloading ServicesThis subcontract for Flatbed Hauling and Unloading Services involves the transportation and delivery of 400 utility poles to various yards in Nashville, Tennessee, in support of Nashville Electric Service utility projects. The selected provider will perform truck freight transportation using flatbeds, with operations scheduled between 6:30 AM and 2:30 PM CST. The scope of work requires the use of specialized equipment for on-site unloading, including crane trucks, knuckle booms, or heavy-duty forklifts. To qualify, personnel must possess a valid CDL and proper equipment operator certification. Interested parties must respond by November 5, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 321911
New
SLED
Treated Wooden Utility Pole SupplierThis subcontract agreement establishes the requirements for a supplier to provide treated wooden utility poles for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work involves the manufacture and delivery of 400 40-foot Class 4 poles constructed from either Douglas Fir or Southern Pine. All materials must adhere strictly to NES Specifications 33-151R13 or 33-252R10. The supplier is responsible for the complete production process, including roofing and gaining according to NES Drawing 910 and the application of necessary chemical preservation treatments. The contract concludes upon the successful delivery of the 400 finished and processed poles. Interested parties must respond by November 5, 2026.
Wood Window and Door Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 332312
New
SLED
Steel Utility Pole Supplier (60ft Class H3)This subcontract agreement establishes the requirements for a supplier to provide hot-dipped galvanized steel poles for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing 60-foot poles that meet Class H3 equivalent standards, specifically maintaining a minimum capacity of 0243 ft-kips at ground level. The scope of work includes providing 1 inch jacking nuts and bolts for both the top and bottom halves of the poles, with a strict construction limit of no more than two sections. The selected supplier is responsible for the final delivery of the finished steel poles to Nashville Electric Service.
Fabricated Structural Metal Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
SLED
Flatbed Delivery ServicesThis subcontract for Flatbed Delivery Services involves the transportation of 200 fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects. The selected provider will be responsible for hauling these units from the manufacturer to designated delivery points in Nashville using an open flatbed truck or trailer as specified in the statement of work. To qualify for this engagement, the contractor must possess standard commercial trucking licenses and the required insurance coverage. The solicitation was posted on October 23, 2026, with a response deadline of November 3, 2026. This project falls under NAICS code 484220 for specialized freight trucking.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 326121
New
SLED
Tubular Fiberglass Crossarm SupplierThis subcontract agreement establishes the supply of 200 ten-foot tubular fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing components that adhere to NES Specification ESI-4-E, with dimensions ranging from 3 1/2" x 4 1/2" to 5" x 7". The scope of work includes the provision of braceless mounting assemblies utilizing two 5/8" diameter bolts with vertical spacing of either 8" or 12". The contract is categorized under NAICS code 326121 and requires the delivery of the full quantity of crossarms and their corresponding mounting assemblies.
Unlaminated Plastics Profile Shape Manufacturing

POSTED

5 days ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332722
Closed
SLED
Transformer Stud Connector
Solicitation # Z3808
Nashville Electric Service

POSTED

9 months ago

CLOSED

9 months ago
View Details
NAICS: 332722
Awarded
SLED
SCREW,S/METAL,OVAL,1 1/2"-#14 (BOX OF 100) | 2097831
Solicitation # 2097831
Dallas Area Rapid Transit

POSTED

9 months ago

CLOSED

9 months ago
View Details
NAICS: 332722
Awarded
SLED
NUT,ELASTIC STOP,1/4-28, ZINC (PKG OF 100) | 2097736
Solicitation # 2097736
Dallas Area Rapid Transit

POSTED

9 months ago

CLOSED

9 months ago
View Details
NAICS: 332722
Awarded
SLED
NUT,ESNA, 1.25-7 STEEL,MOTOR INSTALL.,TRUCK ASSY. | 2097703
Solicitation # 2097703
Dallas Area Rapid Transit

POSTED

9 months ago

CLOSED

8 months ago
View Details
NAICS: 332722
Awarded
SLED
WASHER CUT 5/16" (PKG OF 100) | 2097625
Solicitation # 2097625
Dallas Area Rapid Transit

POSTED

9 months ago

CLOSED

9 months ago
View Details
NAICS: 332722
Awarded
SLED
NUT,9/16""-18,GRADE 8 (BOX OF 25) | 2097554
Solicitation # 2097554
Dallas Area Rapid Transit

POSTED

9 months ago

CLOSED

9 months ago
View Details
NAICS: 332722
Awarded
SLED
WASHER LOCK 7/16" MEDIUM (PKG OF 100) | 2097555
Solicitation # 2097555
Dallas Area Rapid Transit

POSTED

9 months ago

CLOSED

9 months ago
View Details
NAICS: 332722
Awarded
SLED
BOLT,3/4-10X2.25 | 2097566
Solicitation # 2097566
Dallas Area Rapid Transit

POSTED

9 months ago

CLOSED

9 months ago
View Details
NAICS: 332722
Awarded
SLED
CLAMP T-BOLT 3.125" - 3.4375" -REF 2096770
Solicitation # 2096770 [MD]
Dallas Area Rapid Transit

POSTED

9 months ago

CLOSED

9 months ago
View Details
NAICS: 332722
Awarded
SLED
BOLT,1/4"-20 X 1 1/2",SST | 2097548
Solicitation # 2097548
Dallas Area Rapid Transit

POSTED

9 months ago

CLOSED

9 months ago
View Details
NAICS: 332722
Awarded
SLED
SET SCREW, HAMMER , GONG HS011-0044 | 2097546
Solicitation # 2097546
Dallas Area Rapid Transit

POSTED

9 months ago

CLOSED

9 months ago
View Details
NAICS: 332722
Awarded
SLED
BOLT,3/8"-16 X 2",GRADE 8,YELLOW ZINC | 2097543
Solicitation # 2097543
Dallas Area Rapid Transit

POSTED

9 months ago

CLOSED

9 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS