This Solicitation opportunity from Department Of Agriculture was posted on March 11, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SeaArk 2072 VFX CC boats with Trailers

Closed

1121043Federal

Submission Closed03/21/2024, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336612

New

SLED

VDOT Approved Aggregate Supplier & HaulerThis subcontract opportunity is for a qualified supplier and hauler to provide various types of VDOT-approved aggregate for prime contractors operating within the Petersburg Residency of the Virginia Department of Transportation's Richmond District. The selected vendor will be responsible for the procurement, transportation, and delivery of materials F.O.B. destination to six Area Headquarters, including Jennings Ordinary, where they must off-load the aggregate into neat stockpiles. To be eligible, contractors must hold VDOT Approved List #5 certification and ensure all materials and processes comply with Section 109 of the 2020 Road and Bridge Specifications. Interested parties must submit their responses by November 5, 2026, to support infrastructure projects managed by the Virginia Department of Transportation.

Virginia Department of Transportation

POSTED

DEADLINE

BOAT TRAILERS FOR FWS REFUGES LAW ENFORCEMENT.

Solicitation # 140FF027Q0016

Solicitation 140FF027Q0016 is a fixed-price request for the procurement of three new, unused, current production heavy-duty boat trailers for the Department of the Interior's FWS Refuges Law Enforcement. The trailers, which can be Amera Trail or an equivalent, are specifically configured for Yellowfin 24 Bay vessels and will be used for manatee zone enforcement in Florida. Technical specifications require an aluminum corrosion-resistant frame with stainless steel hardware, a 6,800 lb GVWR, tandem axles with 3,500 lb capacity each, electric over hydraulic brakes, and LED lighting. The contract is a total small business set-aside under NAICS code 336612. To be eligible for award, sellers must be manufacturers or federally authorized distributors capable of delivering the entire order within 90 days of the award date. The government will award the contract to the responsible offeror whose proposal is most advantageous based on price and other factors. All quotes must be submitted as a single consolidated PDF not exceeding 15 pages, with the total price including all shipping and handling costs. Payment will be processed electronically via the U.S. Department of the Treasury's Invoice Processing Platform. Final acceptance will occur upon delivery at the designated agency location following a successful inspection to verify that all federal, state, and manufacturer safety standards have been met.

Fws Contracting Activity

POSTED

DEADLINE

Public Safety and Emergency Services - Request for Quotes - PSD FWES River Jet Boat

Solicitation # AB-2026-06971

Public Safety and Emergency Services, specifically the Fish and Wildlife Enforcement Services, is seeking quotes for the procurement of one river jet boat. This solicitation, identified by number AB-2026-06971, is intended for performance within the province of Alberta. The request for quotes was posted on October 19, 2026, and requires a response by the deadline of October 29, 2026. Interested parties should direct inquiries to the primary procurement officer, Stephen Katabula, via the provided agency email address.

Public Safety and Emergency Services

POSTED

DEADLINE

Supply of Marine Navigational Lights (NSN 6220-00-050-6743)This subcontract opportunity is for the supply of specialized marine navigational lights, specifically NSN 6220-00-050-6743, to support prime contractors fulfilling DLA supply contracts. The Department of Defense, through the DLA Weapons Support ASC Commodities Division, requires that all lights be manufactured or procured in strict accordance with TDP Rev A Gen 1 and reference specification MIL-DTL-24560A SUP 1, Revision A. Delivery terms are established as F.O.B. Origin. Eligible bidders must hold a valid CAGE code and maintain ISO 9001:2015 certification. This procurement is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 336612. The solicitation was posted on October 19, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

PANEL FLOOR SECTION, WA

Solicitation # SPE7M4-27-T-0601

Solicitation SPE7M4-27-T-0601 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for 27 units of watercraft panel floor sections, identified by NSN 2040016575748 and part number 1630018. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania with a delivery timeline of 403 days after order. Shipping is designated as FOB Origin, and both inspection and acceptance will occur at the destination. The contractor must adhere to strict technical and environmental standards, including the prohibition of intentionally added mercury and Class I ozone-depleting substances. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. This solicitation is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information. Quotes must be submitted via the DLA Internet Bid Board System by December 31, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-453Q

Solicitation SPE7M4-26-T-453Q is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 90 units of Deck Lashing Gear (NSN 2020-00-789-1065). This is designated as a critical application item that must be manufactured via a forging process in accordance with Technical Data Package Rev A Gen 1 and basic drawing 53711 1313817 Revision C. The required delivery date is December 1, 2027, with shipment to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict adherence to environmental and safety standards, specifically prohibiting the intentional addition of mercury and the use of Class I ozone-depleting chemicals. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129, with a general requirement to avoid plastics for wrapping and cushioning. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with DFARS 252.204-7012 for cybersecurity. The solicitation is open to full and open competition, with a price evaluation preference available for certified HUBZone small business concerns.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Shafting and Rudder MaintenanceThis subcontract for Shafting and Rudder Maintenance involves providing specialized inspection and repacking services for rudder and propeller shafts on behalf of prime contractors for the Massachusetts Maritime Academy. The scope of work includes repacking rudder shafts using 3/4-inch Chesterton packing, replacing the starboard side shaft seal with a Duramax DXU4000A, and conducting thorough inspections of the cutlass bearings. The contractor is required to deliver the repacked shafts, the newly installed seal, and a detailed written condition report. The project will be performed at Academy Drive in Buzzards Bay, Massachusetts. Interested parties must note that the response deadline for this opportunity is November 3, 2026. The contract falls under NAICS code 336612 and is managed through the Massachusetts Maritime Academy.

MMA01 - Massachusetts Maritime Academy

POSTED

DEADLINE

Cathodic Protection (Zinc Anodes)This subcontract for the Massachusetts Maritime Academy involves the supply and installation of a cathodic protection system to prevent hull corrosion. The scope of work requires the removal and replacement of up to 34 bolt-on zinc anodes measuring 1-1/4 by 6 by 12 inches, as well as one half-zinc located at the sea chest. The project will be performed at Academy Drive in Buzzards Bay, Massachusetts. Interested parties must submit their responses by November 3, 2026, in accordance with the solicitation posted on October 19, 2026.

MMA01 - Massachusetts Maritime Academy

POSTED

DEADLINE

Shipyard Haul-out and Docking ServicesThe Shipyard Haul-out and Docking Services subcontract involves the physical haul-out, blocking, shoring, and relaunching of the TV Ranger for prime contractors supporting Massachusetts Maritime Academy projects. The selected provider must utilize a dry dock or marine hoist facility capable of safely positioning the vessel for necessary repairs and ensuring its secure return to the water. Performance of these services will take place at Academy Drive in Buzzards Bay, Massachusetts. The solicitation was posted on October 19, 2026, with a response deadline of November 3, 2026. This opportunity falls under NAICS code 336612.

MMA01 - Massachusetts Maritime Academy

POSTED

DEADLINE

Navy Shipboard Rack Curtain ManufacturingThis subcontract, managed by DLA Maritime - Portsmouth for the Department of Defense, requires the manufacture and supply of 338 black single-panel rack curtains, identified as Product Number RC-SPECIAL 1. These curtains are intended for prime contractors working on US Navy shipboard projects and must be fabricated from darkening double-layer Nomex material. Specific design requirements include the exclusion of sliders at the top and the inclusion of inside bottom pockets for any units with a height of 18 inches or greater. To ensure operational safety and quality, all deliverables must be Navy shipboard approved and strictly comply with MIL-C-24500 and MIL-STD-1623 standards. This opportunity is designated as a Total Small Business Set Aside under NAICS code 336612, with the place of performance located in Kittery, Maine.

DLA Maritime - Portsmouth

POSTED

DEADLINE

Commercial Shipyard Welding and Fabrication ServicesThe Commercial Shipyard Welding and Fabrication Services subcontract involves providing high-specification welding, brazing, and fabrication for prime contractors supporting NAVSUP FLCY shipboard projects in Yokosuka. The scope of work includes the fabrication and inspection of pressure vessels, fillet welds, and brazed piping systems, utilizing high-heat input procedures and Post Weld Heat Treatment. All deliverables must adhere to strict industry standards, including AWS, ABS Steel Vessel Rules, and ASME BPVC Section IX. The selected provider is responsible for delivering certified welded assemblies along with comprehensive inspection reports to the Department of Defense.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Marine Grade Base Metals and Welding Consumables SupplierThis subcontract opportunity with the Department of Defense, managed by the Navsup Fleet Logistics Center Yokosuka, seeks a supplier for commercially stocked base metals and welding consumables to support prime contractors on NAVSUP FLCY maritime projects. The selected provider will be responsible for identifying and recommending S-Group base metals and A-Group filler metals in accordance with specific reference tables, ensuring all materials are compatible with NAVSEA welding standards. The scope of work includes the delivery of a detailed material suggestion list accompanied by technical specification sheets, JIS standards, and operational usage data. Interested parties must submit their responses by November 20, 2026, for performance in Yokosuka.

Navsup Flt Logistics Ctr Yokosuka

POSTED

3 days ago

DEADLINE

in 30 days

General Info

Agency

Department Of Agriculture → Ws Nwrc Gainesville Fl

NAICS

336612 - Boat Building

Place of Performance

Gainesville, FL, 32641, USA

Set-Aside

SBA

Documents

SOW - SeaArk 2072 VFX CC Boats

1 page · sow

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMar 11

Solicitation

Response DeadlineMar 21

Deadline has passed

Submission Closed

03/21/2024, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Agriculture → Ws Nwrc Gainesville Fl

Contacts1 person available

OfficeGAINESVILLE, FL, 32641, USA

Organization / AgencyDepartment Of Agriculture → Ws Nwrc Gainesville Fl

Office AddressGAINESVILLE, FL, 32641, USA

Contacts

Todd Bierl

contact@example.gov

+1 (555) 000-0000

Full Description

Brand Name Solicitation USDA APHIS Florida WS program is requesting to purchase 2 - SeaArk 2072 VFX CC boats with trailers to assist with accessing remote areas for wildlife management purposes. In the past, the Florida WS program has utilized a variety of boats from other companies, however the SeaArk fits our needs the best. Additional features: Sea-Ark VFX (Shadow) 2072 CC DLX 25" Transom Aluminum Tread Plate Floor Tan Exterior Paint Center Console w/ Livewell and Cushion LED Nav Lights & Trolling Motor Wiring Line-X Interior & on Hinged Rear Lid Sea-Star Hydraulic Steering Exchange Leaning Post - Attaches to Rear Deck SS Steering Wheel w/ Knob 2 6" Nylon Cleats Yamaha Pre-Rig w/ Digital Tach Auto Bilge Pump Upgrade Flotation Pods for 72" Series Telescopic Ladder for Flotation Pod Power Pole Mounting Bracket 28 Gallon Built in Fuel Tank at Bow Transducer Bracket Hinged Rear Lid Dual Cranking Batteries Dual Battery Switch - Installed New 2023 Yamaha F115XB 3 Blade Stainless Steel Prop Engine Oil Fuel/Water Sep. Filter New 2024 aluminum trailer Aluminum Frame Construction Radial Tires 2x4 Bunk Skids LED Lights Side Guides Spare Tire w/ Mount Vendors must be registered in SAM.Gov and current. No late quotes will be accepted. All quotes will be emailed to the Contracting Officer: Todd K. Bierl (Major Program Contracting Officer) Emergency Acquisition USDA MRP AAMD Acquisition Email: Todd.K.Bierl@usda.gov Office#(612)336-3465 Cell# (612)500-1321/(763)286-8084

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS