Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SEABOSS - RFP

Active
M6700426R0002-RFPFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The solicitation titled SEABOSS - RFP with number M6700426R0002-RFP, issued by the Commander of the Department of Defense, seeks qualified small businesses to provide all labor, materials, and equipment necessary for intermediate and depot level repairs, including system alterations, in accordance with the Performance Work Statement and contract terms. This is a Small Business Set Aside with total restriction, targeting firms categorized under NAICS code 811310, and the work is to be performed at a location with zip code 32226. All proposals must include a completed and signed SF 1449 RFP form with all provisions and clauses filled out, and must adhere strictly to the instructions detailed in Attachment 1 Section L. The opportunity was posted on August 4, 2026, with proposals due by September 4, 2026, at 8:00 PM Eastern Time. Any inquiries must be submitted in writing to Stanley Sanders at stanley.sanders@usmc.mil before the deadline of September 21, 2026; no telephone inquiries will be accepted. The primary point of contact is Stanley Sanders, reachable at 904-696-4812, with Malcolm Williams listed as the secondary contact. The activity is headquartered in Albany, Georgia, with the official solicitation accessible through the SAM.gov portal.

General Info

Small business set aside for depot-level repairs at 32226, due Sept 4, 2026, via SAM.gov, contact Stanley Sanders.

Agency

Department Of Defense → CommanderView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

GA, 32226, USA

Set-Aside

SBA

Documents

(3)

D+1+Attachment+2_Wage+Determination+2015-4539+rev.+30.pdf

PDF

D+1_ATTACHMENT+1+SECTION+L.docx

DOCX

D+1_Solicitation+-+M6700426R0002.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Commander
Contacts2 people available
OfficeALBANY, GA, 31704-0313, USA
Organization / Agency
Department Of Defense → Commander
View Agency Profile
Office AddressALBANY, GA, 31704-0313, USA
Contacts
Stanley Sanders
contact@example.gov
+1 (555) 000-0000
Malcolm Williams
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

Provide all labor, materials and equipment for intermediate, depot level repair to include system alterations IAW the PWS and terms and conditons of the contract. All offerors must sign and return the attached SF 1449 RFP with all fill-in provisions and clauses along with the Proposal. Please refer to Attachment 1 Section L for instructions regarding proposla package requirements and submission. Any questions or comments regarding this RFP must be submitted in writing to the Contracting Officer at stanley.sanders@usmc.mil, no telephonic inquires will be entertained and the last day for questions and comments is 21 September 2026.

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
SLED
Equipment Upkeep, Repair & Replacement at Corpus Christi State Supported Living Center (CCSSLC)
Solicitation # HHS0017404V2
The Texas Health and Human Services Commission is seeking competitive bids to establish a contract for equipment upkeep, repair, and replacement at the Corpus Christi State Supported Living Center, identified by solicitation number HHS0017404V2. The contract aims to ensure continued operational integrity of facility equipment through routine maintenance, timely repairs, and necessary replacements, with an anticipated start date of September 1, 2026. Bidders must submit responses by August 25, 2026, at 10:30 a.m. Central Time, and all communications and official updates will be posted via the Texas SmartBuy portal. An optional on-site visit is scheduled for August 7, 2026, at 10:30 a.m. at 902 Airport Rd, Corpus Christi, TX 78405, where bidders can review requirements and tour the facility, though attendance is not mandatory and will not affect bid eligibility. Bidders must notify Richard Castaneda or Debbie Salinas if planning to attend the visit. All questions and clarifications must be submitted by August 12, 2026, at 5:00 p.m. Central Time, with official responses provided via addendum posted on the Electronic State Business Daily no later than August 17, 2026. The solicitation is managed by the Health and Human Services Commission, with Isaiah Wilczynski listed as the primary point of contact for procurement inquiries. The contract type is a standard solicitation without a specific set-aside designation, and performance will occur exclusively at the Corpus Christi facility in Texas. Bidders are expected to understand the scope of work through the issued documentation, with the expectation that all services will support the long-term functionality and safety of equipment critical to resident care and facility operations.
Health and Human Services Commission

POSTED

about 11 hours ago

DEADLINE

in 20 days
View Details
NAICS: 811310
New
Federal
Warranty and Post-Delivery Support ServicesThe contract requires the provision of warranty-period repair, replacement, technical support, and field service for an electric bone drill, all in strict accordance with the manufacturer’s warranty terms. Services must be delivered promptly and effectively to ensure continued operational reliability of the device, with a focus on minimal downtime and full compliance with established technical and safety standards. All support activities, including diagnostics, parts replacement, and on-site field service, are to be performed in accordance with the manufacturer’s specifications and within the defined warranty period. This is a small business set-aside subcontract under NAICS code 811310, assigned to the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. The performance location is specified as San Diego, CA, with a zip code of 92161. The solicitation was posted on August 4, 2026, and responses are due by August 12, 2026. Only entities qualifying as small businesses under SBA guidelines are eligible to bid, and the contract is structured to prioritize local or regional service providers capable of meeting the technical and logistical demands of supporting medical equipment in a federal healthcare environment.
262-NETWORK Contract Office 22 (36C262)

POSTED

about 20 hours ago

DEADLINE

in 8 days
View Details
NAICS: 811310
New
Federal
Preventative Maintenance of T2100 Treadmill ST for Cardiac Stress TestingThe contract requires timely execution of comprehensive preventative maintenance on T2100 Treadmill ST units utilized in cardiac stress testing environments, encompassing mechanical and electrical inspections, precision calibration, safety testing, and software diagnostics to ensure operational integrity and patient safety. All work must adhere to established clinical and equipment standards to maintain the reliability of these critical medical devices used in diagnostic procedures. The contract is designated as a subcontract under NAICS code 811310 and is managed by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7, with a strict response deadline of August 5, 2026, at 4:00 PM. The scope demands specialized technical expertise and compliance with medical equipment maintenance protocols, though specific location details and point of contact information are not provided. All activities are expected to be performed with precision to support the continuous functionality of treadmills integral to cardiac stress testing workflows.
247-NETWORK Contract Office 7 (36C247)

POSTED

about 20 hours ago

DEADLINE

in about 8 hours
View Details
NAICS: 811310
New
Federal
Post-Delivery Technical Support and Maintenance ServicesThe contract covers ongoing maintenance, calibration, and repair services for the Steris AMSCO 600LS sterilization unit located at the Boise VA Medical Center, ensuring continuous operational reliability of this critical healthcare equipment. Services are required to be performed in accordance with manufacturer specifications and industry standards to maintain compliance with safety and sterilization protocols essential for patient care. The work is classified under NAICS code 811310, indicating it is a technical maintenance and repair service, and is structured as a subcontract under the Department of Veterans Affairs through Rpo East. The solicitation was posted on August 4, 2026, with a response deadline of August 7, 2026, indicating a short turnaround for proposers to submit qualifications and service plans. The place of performance is tied directly to the Boise VA Medical Center, requiring on-site presence and rapid response capabilities for emergency repairs. The contract does not specify a set-aside status or point of contact, and no detailed funding or performance metrics are included in the provided data, but the nature of the equipment necessitates qualified technicians with experience in high-level medical sterilization systems.
Rpo East (36C24E)

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 811310
New
Federal
Post-Delivery Support and Maintenance Services
255-NETWORK Contract Office 15 (36C255)

POSTED

about 20 hours ago

DEADLINE

in 13 days
View Details
NAICS: 811310
New
Federal
Notice of Intent to Sole Source: Transition to Wired RaycoWylie LMI Configuration - Craft Portal Cranes
Solicitation # LMI_Sources_Sought
The U.S. Navy, through NAVFACSYSCOM Atlantic, has issued a notice of intent to sole source the transition to the Wired RaycoWylie LMI configuration for Craft Portal Cranes, with the solicitation number LMI_Sources_Sought. This action is aimed at securing specialized equipment modifications and integration services that require exclusive technical expertise, with no competitive bids anticipated under current conditions. The opportunity is open for responses until August 11, 2026, at 8:00 PM Eastern Time, with interested parties encouraged to submit feedback prior to the deadline to ensure all relevant capabilities are considered for this non-competitive procurement. The work will be performed at a location in Virginia, specifically designated by the address 64304, while the office overseeing the procurement is located in Norfolk, Virginia, within the Department of Defense. Lisa Sumpter serves as the primary point of contact for this solicitation and can be reached via email at lisa.a.sumpter.civ@us.navy.mil. The contract will be managed under the agency's authority, and the place of performance is situated in Virginia within the same jurisdiction as the procuring office. As no NAICS code or set-aside classification has been provided, the procurement is being treated as a standard government acquisition under the Office’s direct control, with no indication of small business or other socioeconomic preferences. All information and correspondence must be directed to the designated point of contact, and further details can be accessed through the provided SAM.gov link.
Navfacsyscom Atlantic

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811310
New
Federal
Autonomous Mower Maintenance Service
Solicitation # FA4690SS01
The U.S. Department of Defense, through the 28th Contracting Squadron at Ellsworth Air Force Base in South Dakota, is seeking information on capable providers to perform maintenance services for Renubot Autonomous Mowers in accordance with the attached Performance Work Statement. This request targets vendors who can deliver compatible maintenance solutions aligned with Renubot software systems and is issued as a Small Business Set Aside, meaning only small businesses are eligible to respond. The solicitation, identified as FA4690SS01, is strictly for market research and does not constitute a request for proposals or an invitation to submit offers. Interested parties must submit responses by August 7, 2026, to indicate their ability to meet the specified service requirements. All work is to be performed at Ellsworth AFB with a ZIP code of 57706, and inquiries should be directed to Aaron Fox-Snider or Martelangelo Surop through the provided contact details.
FA4690 28 Cons Pkc

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 811310
New
Federal
Repair of Kell-Strom T-400 Riveter
Solicitation # N68520-26-SIMACQ-JC00000-0250
The Navy’s Naval Air Systems Command is seeking to sole-source the repair of a legacy T-400 riveter, asset number 65923043611, to Kell-Strom Tool Co. as the only known source capable of performing the complex, iterative repair process required. This unit demands a specialized troubleshooting methodology where faults are only revealed after prior issues are resolved, necessitating repeated test-and-repair cycles that typically involve custom fabrication or replacement of nearly all internal components to restore proper clamping, alignment, and riveting capabilities. Kell-Strom’s unique access to OEM-licensed technical data, proprietary tooling, and specialized test facilities makes it the only responsible contractor capable of meeting the demanding technical and timeline requirements. The work includes initial diagnostic inspection, ongoing serial repair cycles, component fabrication or procurement, and final calibration to meet original equipment manufacturer specifications. Deliverables include a fully restored and tested riveter, a detailed repair and fabrication summary documenting all faults and replacement parts, and a certified test report verifying compliance with P&WC OEM safety, precision, and performance standards. The solicitation, issued under number N68520-26-SIMACQ-JC00000-0250 with a response deadline of August 19, 2026, will be evaluated based on technical capability, price, and past performance. The place of performance is Cherry Point, North Carolina, and the contract falls under NAICS code 811310 with no set-aside designation. Primary point of contact is Daniel Collins of the Department of Defense, based at Patuxent River, Maryland.
Naval Air Systems Command

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 811310
New
Federal
Airfield Vehicle Gates Maintenance and Repair Services
Solicitation # FA480026Q0087
The contractor is required to deliver comprehensive maintenance and repair services for airfield vehicle gates at Joint Base Langley-Eustis and Langley Air Force Base in Virginia, providing all necessary management, transportation, tools, supplies, equipment, and labor to ensure continuous and reliable operations. The work must be performed to meet strict service standards and support the uninterrupted functionality of critical airfield infrastructure. This procurement is a Small Business Set Aside under NAICS code 811310, reserved exclusively for small businesses, and is managed by the Department of Defense through the Office of FA4800 633 Cons Pkp located at Langley Air Force Base. Solicitation responses are due by 1700 Eastern Time on 12 August 2026, with mandatory questions to be submitted no later than 1400 Eastern Time on 31 July 2026; responses to inquiries will be issued by 1400 on 4 August 2026. Contractors may submit only one consolidated set of questions, combining all prior inquiries, and must ensure submissions are thorough and complete. The primary point of contact for the solicitation is Vanity Wright, with secondary support provided by SSgt Radost Griffin, and additional details can be accessed via the official SAM.gov link.
FA4800 633 Cons Pkp

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811310
New
Federal
Vertical Reciprocating Conveyor (VRC) Repair
Solicitation # N32253-26-Q-0070
The Pearl Harbor Naval Shipyard & IMF is initiating a sole-source, firm-fixed-price contract under the Revolutionary FAR Overhaul to secure commercial structural repairs and hardware replacement for a Vertical Reciprocating Conveyor located on its Dry Dock. The procurement is restricted to Ducworks Inc., the original equipment manufacturer, as the Naval Sea Systems Command has confirmed that only Ducworks possesses the proprietary engineering data and specialized drawings necessary to perform the work, and no third parties are authorized or licensed to access this information. This action is justified under RFO 12.201-1 and publicized in compliance with RFO 12.202(a) and RFO 5.101(a), ensuring adherence to simplified procedures for commercial services. The contract will be issued under solicitation number N32253-26-Q-0070 with a response deadline of August 6, 2026, at 12:30 AM HST. While the intent is to award without competition, any responsible source may submit a capability statement or proposal prior to the deadline to demonstrate technical capability and access to the required proprietary information. All submissions must be sent electronically to Colby Teruya and Lyndon Paloma at the designated Navy email addresses. The Government retains full discretion to determine whether competition is warranted based on responses received.
Pearl Harbor Naval Shipyard IMF

POSTED

about 20 hours ago

DEADLINE

in about 17 hours
View Details
NAICS: 811310
New
Federal
AIRFIELD LEAKING TRANSFORMER
Solicitation # 31125260000817
The contract requires the comprehensive removal and replacement of existing airfield lighting transformers at U.S. Coast Guard Base Cape Cod on Joint Base Cape Cod in Buzzards Bay, Massachusetts, with new units meeting precise technical specifications. The scope covers three primary transformers: two single-phase 37.5 KVA units from McGraw Edison—Transformer 413 near Building 614 and Runway 23, and Transformer 523 near Building 614 and Runway 14—and one three-phase 1500/1680 KVA unit from ABB, which was previously misidentified in the Statement of Work as Transformer 232177 but must now be replaced according to the corrected description: Transformer 138613, located adjacent to Building 3181 apron, with a 1000/1120 KVA rating, 4160GRDy/2400 high voltage, 480Y/277 low voltage, and 329 gallons of mineral oil. The contractor is responsible for verifying all existing transformer details, securing power, removing and disposing of old units at their own expense off-base, installing new transformers per manufacturer guidelines, and restoring full operational functionality with testing. Special attention is required for the ABB transformer regarding potential oil leaks, including thorough investigation and submission of replacement or repair feasibility analysis. An optional fourth transformer, a 15 KVA single-phase unit from Southeastern Transformer Co near Building 195 and Runway 5, is available for separate bid consideration. The contract imposes strict performance, safety, and compliance obligations. All work must be completed within 45 calendar days of the Notice to Proceed, with equipment delivered FOB destination. Personnel must be fully qualified, with skilled labor and on-site supervision that can read, write, and speak English, and who are authorized to approve minor changes under $2,000. Daily logs must be submitted weekly to the Contracting Officer’s Representative (COR), who also conducts inspections and final acceptance. The contractor must comply with NFPA 70, FAA regulations, OSHA standards, Joint Base Cape Cod fire and safety protocols, including mandatory hot work permits for welding or burning. Environmental and hazardous material rules apply: all displaced materials require proper documentation via bill of lading, landfill receipts, and recycler permits, and any hazardous substances used or encountered must be reported immediately to the COR with
Base Cape COD(00052)

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 811310
New
Federal
Water Blast System Service, Repair, & Training
Solicitation # W911N2-26-Q-A011
The contract, identified as W911N2-26-Q-A011, is a sole-source, indefinite-delivery/indefinite-quantity (IDIQ) firm-fixed-price agreement for annual preventive maintenance, repair, and training services on water blast systems at Letterkenny Army Depot in Chambersburg, Pennsylvania. The base performance period runs from August 24, 2026, to August 23, 2027, with four additional one-year option periods extending through August 23, 2031, for a potential total contract value between $20,000 and $250,000. Services encompass comprehensive evaluation, maintenance, and restoration of water blast systems, pressure pots, handheld guns, and recirculation systems to 100% operational status, including the training of depot technicians on safety, operation, and certification. All work is governed by the Performance Work Statement and must comply with OSHA, NFPA 70, ASME B31.3, NEMA 250, and LEAD Regulation 385-1 standards, with 100% Acceptable Quality Level required for deliverables. The contractor must be registered in SAM.gov and must provide all labor, tools, materials, and travel expenses under a firm-fixed-price structure without discussions, indicating a Lowest Price Technically Acceptable award approach. Performance is restricted to standard work hours on weekdays, excluding federal holidays, and requires pre-visit coordination with government representatives. All personnel must undergo background checks, complete AT Level I, iWATCH, and OPSEC training within 30 days of assignment, and adhere to strict physical security and hazardous material handling protocols with full compliance to GHS and HazCom labeling. Payment will be processed via Wide Area WorkFlow using Electronic Funds Transfer through the Defense Finance and Accounting Service, and the Contracting Officer’s Representative and Technical Point of Contact will oversee inspection, acceptance, and compliance with the Quality Assurance Surveillance Plan. A Contract Manager must be designated and approved by the government, and any organizational conflicts of interest must be disclosed and mitigated immediately. The contract includes no set-aside provisions, and while socioeconomic categorization and size status are solicited, no offeror responses have been documented. The contract’s unique requirements also mandate strict environmental compliance, immediate reporting of incidents, certified equipment inspections, and adherence to DoD-access policies for unbadged personnel.
W6QK Lad Contr Office

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Commander

Same awarding agency

NAICS: 561990
New
Federal
Traffic Control and SignageThe contract is for the installation and maintenance of temporary traffic control zones, signage, and lane closures in support of construction activities at Quantico, Virginia, with a zip code of 22134. This subcontract is set aside exclusively for SBA-certified Women-Owned Small Businesses under the WOSB Program, ensuring eligibility and participation by businesses meeting specific ownership and control criteria. The NAICS code 561990 categorizes the work under Other Support Activities, indicating specialized services related to traffic management and safety infrastructure. The solicitation was posted on August 4, 2026, with a response deadline of August 20, 2026, at 2:00 PM, and is managed by the Department of Defense under the Commander entity. The place of performance is strictly limited to the Quantico location, and all work must comply with federal regulations governing temporary traffic control during construction operations.
All Other Support Services

POSTED

about 20 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541370
New
Federal
Surveying and Layout ServicesThe contract seeks qualified vendors to provide surveying and layout services for a Department of Defense project located in Quantico, Virginia, with a focus on establishing site control points, executing grading layouts, and performing as-built verification using GPS and total station equipment. The work requires precise geospatial data collection and documentation to ensure alignment with engineering designs and construction standards, with deliverables that support accurate project execution and compliance. The solicitation is designated as a subcontract under the SBA Certified Women-Owned Small Business (WOSB) Program Set-Aside, meaning only businesses certified under the WOSB Program are eligible to respond. The North American Industry Classification System code is 541370, indicating specialized engineering surveying and mapping services. Responses must be submitted by August 20, 2026, at 2:00 PM, with the opportunity announced on August 4, 2026, and all work expected to be performed at the Quantico site with ZIP code 22134.
Surveying and Mapping (except Geophysical) Services

POSTED

about 20 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541620
New
Federal
Environmental Compliance and MonitoringThe contract is for environmental compliance and monitoring services related to stormwater management, erosion control inspections, and regulatory reporting during construction activities. It is a subcontract awarded under the SBA Certified Women-Owned Small Business Program Set-Aside, specifically reserved for entities certified under the WOSB program, and falls under the NAICS code 541620 for environmental consulting services. The work will be performed at Quantico, Virginia, with a response deadline of August 20, 2026, and the opportunity was posted on August 4, 2026. The contracting agency is the Department of Defense under the Commander, and the services required are critical to ensuring adherence to environmental regulations throughout the construction phase. All activities must align with federal and local environmental standards, and the contractor is expected to provide thorough documentation and reporting to maintain regulatory compliance.
Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332312
New
Federal
Structural Steel Fabrication and ErectionThe contract is for the fabrication and on-site assembly of structural steel members, including beams, columns, and connections, under a subcontract set aside exclusively for SBA-certified Women-Owned Small Businesses through the WOSB Program. The work is classified under NAICS code 332312 and is required to be performed at Quantico, Virginia, with a zip code of 22134. The solicitation was posted on August 4, 2026, and responses are due by August 20, 2026, at 2:00 PM Eastern Time. The contracting agency is the Department of Defense under the Commander, indicating a federal defense-related project requiring compliance with military construction or facility standards. All activities must be completed by a qualified WOSB firm, ensuring adherence to small business set-aside regulations and performance requirements specified for defense-related steelwork.
Fabricated Structural Metal Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 15 days
View Details
NAICS: 237310
New
Federal
Paving and Asphalt WorkThe contract seeks qualified contractors to perform asphalt or concrete paving work for roads, parking lots, and accessways, encompassing full base preparation and striping services. It is issued as a subcontract under the SBA Certified Women-Owned Small Business Program Set-Aside, exclusively available to businesses certified as Women-Owned Small Businesses, and is classified under NAICS code 237310 for Highway, Street, and Bridge Construction. The opportunity was posted on August 4, 2026, with responses required by August 20, 2026, at 2:00 PM Eastern Time, and the performance location is designated as Quantico, Virginia, with a zip code of 22134. The contracting agency is the Department of Defense under the Commander, though specific office and contact details are not provided. All work must comply with federal standards for pavement installation and surface marking, and bidders must demonstrate capacity for complete project execution from grading and base laying to final striping.
Highway, Street, and Bridge Construction

POSTED

about 20 hours ago

DEADLINE

in 15 days
View Details
NAICS: 237990
New
Federal
Earthwork and Site GradingThe contract titled Earthwork and Site Grading is a subcontract set aside exclusively for SBA Certified Women-Owned Small Businesses under the WOSB Program, as defined by FAR 19.15, and is coded under NAICS 237990. It encompasses all earthwork activities required to prepare a construction site, including excavation, cut and fill operations, grading, and compaction. The work is specifically designated for performance at Quantico, Virginia, with a zip code of 22134, and the solicitation was posted on August 4, 2026. Interested parties have until August 20, 2026, at 2:00 PM to submit their responses. The contracting entity is the Department of Defense, with the Commander designated as the responsible organization, though no further point of contact or office address details are provided. The opportunity is accessible through the SAM.gov platform for bidding and submission.
Other Heavy and Civil Engineering Construction

POSTED

about 20 hours ago

DEADLINE

in 15 days
View Details
NAICS: 238110
New
Federal
Concrete Forming and PouringThe contract is for concrete forming and pouring services, covering the installation of formwork, placement of reinforcement, and casting of concrete for foundations, slabs, walls, and other structural elements at a location in Quantico, Virginia, with a zip code of 22134. This is a subcontract under the SBA Certified Women-Owned Small Business Program Set-Aside, meaning only businesses certified as Women-Owned Small Businesses are eligible to bid. The North American Industry Classification System code is 238110, which classifies the work as concrete work contractors. The opportunity was posted on August 4, 2026, with a deadline for responses on August 20, 2026, at 2:00 PM. The contracting agency is the Department of Defense under the Commander, and the contract is not tied to a specific solicitation number. All work must be performed at the designated place of performance in Quantico.
Poured Concrete Foundation and Structure Contractors

POSTED

about 20 hours ago

DEADLINE

in 15 days
View Details
NAICS: 238220
New
Federal
Plumbing and Piping SystemsThe contract titled Plumbing and Piping Systems seeks a subcontractor to install sanitary, potable water, and drainage piping systems along with associated fixtures and venting infrastructure. The work is designated as a subcontract under the SBA Certified Women-Owned Small Business Program Set-Aside, exclusively available to businesses certified as Women-Owned Small Businesses. The NAICS code 238220 applies, indicating the work falls under plumbing, heating, and air-conditioning contractors. The project is to be performed at Quantico, Virginia, with a zip code of 22134, and the solicitation was posted on August 4, 2026. Interested vendors must submit their responses by the deadline of August 20, 2026, at 2:00 PM. The contracting activity is under the Commander, Department of Defense, though specific office address and point of contact details are not provided. The opportunity is accessible through the SAM.gov portal for further details and submission.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 20 hours ago

DEADLINE

in 15 days
View Details
NAICS: 327320
New
Federal
Ready-Mix Concrete SupplyThe contract is for the supply of ready-mix concrete to a project site located in Quantico, Virginia, with a zip code of 22134. It is structured as a subcontract under the SBA Certified Women-Owned Small Business Program Set-Aside, exclusively available to businesses certified under the WOSB program. The NAICS code 327320 confirms the work involves the manufacturing of concrete products. The solicitation was posted on August 4, 2026, with a response deadline of August 20, 2026, and is managed by the Department of Defense through the Commander office. The contractor is expected to coordinate scheduling with project timelines and provide comprehensive quality control documentation to ensure compliance with technical and safety specifications. Delivery must be timed to support on-site construction activities, and all materials must meet the required standards for strength, durability, and consistency as defined by the project’s engineering requirements.
Ready-Mix Concrete Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 15 days
View Details
NAICS: 238210
New
Federal
Electrical Installation and WiringThe contract titled Electrical Installation and Wiring pertains to the installation of comprehensive electrical systems for commercial or infrastructure projects under a subcontract arrangement. It specifically requires the provision and installation of conduits, wiring, electrical panels, and lighting fixtures, with work to be performed at a designated location in Quantico, Virginia, zip code 22134. This opportunity is set aside exclusively for SBA Certified Women-Owned Small Businesses under the WOSB Program, ensuring eligibility is restricted to businesses that meet the federal criteria for women-owned small business status. The North American Industry Classification System code for this contract is 238210, which classifies it under Electrical Contractors and Other Wiring Installation Contractors. The solicitation was posted on August 4, 2026, and all responses are due by August 20, 2026, at 2:00 PM Eastern Time. The contracting activity is linked to the Department of Defense under the Commander office, indicating this work supports federal defense infrastructure needs.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 20 hours ago

DEADLINE

in 15 days
View Details
NAICS: 611430
New
Federal
MARCORSYSCOM Mentor Program
Solicitation # M67854-27-Q-0500
The contract titled MARCORSYSCOM Mentor Program, solicited under number M67854-27-Q-0500, is a non-personal service agreement aimed at delivering a comprehensive mentorship initiative aligned with the Marine Corps Systems Command’s Human Capital Management goals. The program is designed to advance professional development, strengthen leadership capabilities, and facilitate the transfer of institutional knowledge among Marine Corps personnel. The solicitation is set aside exclusively for SBA-certified Women-Owned Small Businesses under the WOSB Program, as outlined in FAR 19.15, with the NAICS code 611430 indicating it falls under Educational Support Services. The performance location is in Quantico, Virginia, with the office address listed at 22134-6050. The contracting officer is the Department of Defense, specifically under the Commander’s office. Questions regarding the solicitation must be submitted by 3:00 PM Eastern Time on Thursday, 6 August 2026, and the deadline for quotation submissions has been extended to 10:00 AM Eastern Time on Thursday, 20 August 2026. The primary point of contact is Mark Sanderson, reachable at mark.sanderson@usmc.mil, with Alexandra Diviney serving as the secondary contact at alexandra.diviney@usmc.mil. The solicitation is classified as a combined solicitation and is posted on SAM.gov with the UI link provided for further details and access to updated attachments reflecting the revised timeline.
Professional and Management Development Training

POSTED

about 20 hours ago

DEADLINE

in 15 days
View Details
NAICS: 611519
New
Federal
Medical EMT Certification
Solicitation # M0026426Q0142
The contract titled Medical EMT Certification solicits services related to emergency medical technician certification under solicitation number M0026426Q0142, issued by the Commander within the Department of Defense. The opportunity is open to all eligible offerors with no set-aside restrictions and is classified under NAICS code 611519, indicating training and educational services. The posting date was August 4, 2026, with a mandatory response deadline of August 20, 2026, at 1:00 PM Eastern Time. Performance is required at Quantico, Virginia, with the primary point of contact being Edgar Clark, reachable via email at edgar.clark@usmc.mil or by phone at 910-286-5296; Kellie Holley serves as the secondary contact. All proposals must be submitted through the SAM.gov portal using the provided uiLink, and interested parties are expected to review the attached documentation for full technical and administrative requirements.
Other Technical and Trade Schools

POSTED

about 20 hours ago

DEADLINE

in 15 days
View Details