Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SEAL

Active
SPE7L3-26-T-124YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract under the SEAL designation pertains to the procurement of 61 units of part number 00172 with NSN 5330-01-205-9632, sourced from STANLEY WORKS located in MILWAUKIE under FSCM 54252. The item must comply with stringent material restrictions, including a total prohibition on asbestos as defined in FED-STD-313 and the intentional addition of mercury or mercury-containing compounds, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary to prevent leakage, in accordance with NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract was solicited under number SPE7L3-26-T-124Y, with a response deadline of August 3, 2026, and a delivery requirement within 187 days of award. The place of performance is specified as New Cumberland, PA 17070-5002, and the primary point of contact is Susan Diamond, reachable via email and phone provided. The procurement is classified under NAICS code 339991 and falls under the Department of Defense’s Land Supplier Ops Vehicle Support organization.

General Info

Procurement of 61 units of part 00172 with asbestos and mercury restrictions, delivery to New Cumberland, PA by 187 days post-award.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-124Y.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL
SEAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
STANLEY WORKS THE
MILWAUKIE OR
FSCM 54252
P/N 00172
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ADEQUATE DATA FOR NSN/Part Number: 5330-01-205-9632 Quantity: 61 EA Purchase Request: 7017528157QTY: 61 Delivery: 187 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKET AND SEAL SETThe contract pertains to the procurement of a GASKET AND SEAL SET with NSN 5330-01-308-3522, designated as a Navy Critical Safety Item, requiring strict adherence to technical, quality, and security protocols. Compliance is governed by referenced DLA Master List requirements identified by R and I numbers, with applicable revisions tied to either the solicitation or award date depending on acquisition size. The supplier must meet stringent documentation mandates including a Source Approval Request, Cybersecurity Maturity Model Certification Level 2 Self-Assessment, and adherence to DLA packaging standards. Inspection and acceptance occur at origin, with non-accepted items requiring removal of government identification, and all items must be physically marked per RQ017, including contractor and manufacturer CAGE codes, part number, and lot or serial number, though Item Unique Identification is not required. Sampling follows MIL-STD-1916 or ASQ H1331 with zero defects permitted unless otherwise specified, and measuring equipment must comply with RT001 standards. All technical data is controlled under ITAR or EAR, prohibiting export without authorization and restricting access to contractors with approved JCP certification, completed DOD export training, and DLA approval. DFARS 252.225-7048 applies to all technical data handling. Packaging and marking must conform to MIL-STD-129, and any waivers or deviations require formal approval from the DSC Contracting Officer. Delivery is due within 333 days after contract award.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
SEAL, GAS TURBINEThe contract is for 519 gas turbine seals, identified by NSN 5330-00-615-0656, under solicitation SPE7L4-26-U-0988, with a total small business set-aside and a NAICS code of 339991. Delivery is required within 91 days of award, and responses must be submitted by August 6, 2026. All items must comply with technical and quality requirements referenced in the DLA Master List, which governs specifications based on the solicitation or award date depending on acquisition size. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals not explicitly authorized must be submitted for approval. Mercury and mercury-containing compounds are banned from intentional addition or direct contact with hardware, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and certain chemical reagents outlined by NAVSEA, with portable devices required to be shock-proof and have a secondary containment. The product must be free of asbestos, and any alternative materials must meet the approval criteria under Clause L30. Government identification must be removed from non-accepted supplies, and packaging must adhere to DLA standards. Covered defense information may apply. The contract is managed by the Department of Defense through the LSO Combat Vehicles and Armament office, with Heather Kessler listed as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract pertains to a gasket with NSN 5330-01-017-6422, requiring one unit to be delivered within 20 days of award. It is issued under solicitation number SPE7L1-26-T-861R by the Department of Defense’s Land Supply Chain, with a response deadline of August 3, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date controlling for this simplified acquisition. Strict prohibitions are in place: mercury or mercury-containing compounds must not be intentionally added or come into direct contact with the supplied hardware, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a second boundary of containment as mandated by NAVSEA 5100-003D. Asbestos, as defined by FED-STD-313, is completely prohibited. The place of performance is designated as FPO with ZIP code 96683, and all supplies must comply with DLA packaging requirements for procurement. The primary point of contact is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract specifies the procurement of a gasket identified by NSN 5330-00-679-7064, with a fixed quantity of 270 units under a firm fixed price term. The item is source-controlled, meaning only approved vendors—specifically Eagle-Picher Industries Inc and Federal-Mogul Corp Fel-Pro Gasket—are authorized to supply it; all other offerors must obtain prior source approval from the original equipment manufacturer and submit supporting technical documentation with their proposal. The gasket must comply with strict material restrictions, including a complete prohibition of asbestos as defined in FED-STD-313, and must be manufactured and tested using limited rights data accessible only to qualified suppliers. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with all items enclosed in a medium-duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, particularly for direct vendor delivery, foreign military sales, and stock shipments. Delivery is required within 125 days after award, with FOB origin and inspection and acceptance occurring at the destination. The item is subject to defense information controls, and transportation and shipping details direct delivery to DLA Distribution Anniston in Anniston, Alabama. The solicitation closed for responses on July 29, 2026, with an anticipated ship date of December 3, 2026, under a Department of Defense procurement initiative.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract pertains to the procurement of a gasket identified by NSN 5330-01-477-9623 and part number 4119NX0108E05, with a requirement for one unit delivered within 20 days of order placement. Delivery is FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item is subject to strict packaging standards per MIL-STD-2073-1E and MIL-STD-129 for marking, including a special shelf-life marking code 32 indicating a Type I, non-extendable 12-month shelf life. Packaging must be in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, and palletization must adhere to DLA’s packaging requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized. The item contains no asbestos as defined by FED-STD-313 and must be marked in compliance with MIL-STD-130N. Shipment must be sent via the fastest traceable method, excluding parcel post, to the designated FMS delivery point at Edgewood Armory in Maryland. The contract references technical and quality requirements from the DLA Master List and applies to direct vendor delivery and foreign military sales. The solicitation number is SPE7L1-26-T-862H, with a response deadline of August 3, 2026, and the original required delivery date is July 20, 2026.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract pertains to the procurement of a gasket identified by NSN 5330-01-017-6421, with a quantity of one unit, under solicitation number SPE7L1-26-T-861Q. Delivery is required within 20 days of award, and responses must be submitted by August 3, 2026. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Strict prohibitions are in place regarding the use of mercury or mercury-containing compounds, unless exempted for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. In cases where portable fluorescent lamps or instruments containing mercury are permitted, they must be shock-proof and include a secondary containment boundary, as mandated by NAVSEA 5100-003D. Asbestos, as defined by FED-STD-313, is explicitly forbidden in the product. The gasket is to be delivered to a military mail address in FPO with ZIP code 96683, and the contracting activity falls under the Department of Defense’s Land Supply Chain. Primary point of contact for inquiries is Kristina Derry at DLA, reachable via email or phone provided.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RUBBER SHEET, SOLIDThe contract specifies the procurement of a solid rubber sheet measuring 36 inches square and 0.063 inch thick, with a Shore Durometer range of 45.0 minimum to 55.0 maximum, smooth on both sides, and manufactured from synthetic rubber. The item is classified as a Type I shelf-life item with a 12-month lifespan, requiring at least 85% of that shelf life to remain at time of delivery, and all cure and expiration dates must be clearly marked per MIL-STD-129 in calendar quarter and year format. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances allowed unless otherwise stated in the contract. Attributes are classified with verification levels or AQLs, and unspecified attributes are deemed major. Mercury and mercury-containing compounds are prohibited unless exceptions apply for specific functional uses outlined in NAVSEA 5100-003D, and any portable devices containing mercury must have shockproof construction with a secondary containment barrier. The rubber sheet must be free of asbestos as defined in FED-STD-313. Markings are required every three feet with the specification number, revision letter, type, and class, along with the quarter and year of cure or manufacture, following MIL-STD-190 for performance, legibility, color, and environmental resistance. The contractor must certify understanding of bare item markings prior to award. The item, identified by NSN 9320-00-641-3051, is procured competitively under a military specification with a single unit quantity, a 20-day delivery window from award, and is managed by the Department of Defense under contract SPE8E9-26-T-3238.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RUBBER STRIP
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
O-RING
DEPOT HILL

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, SEAL
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
PACKING MATERIAL
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RUBBER STRIP
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 332999
New
DIBBS
INSTALLATION KIT, VEHICThis contract is for the supply of an Installation Kit, Vehicular Equipment identified by NSN 2510-01-673-1162 and part number 0385000112-00, with a quantity of 15 units to be delivered FOB origin under solicitation SPE7L3-26-T-124W. The delivery deadline is 177 days from contract award, with an original required delivery date of October 14, 2026, and a needed ship date of January 28, 2027. Each unit is priced at $15.00, totaling a contract value of $225.00, with zero tolerance for quantity variance. All items must comply with strict packaging standards outlined in MIL-STD-2073-1E Appendix D for kits, and marking must adhere to MIL-STD-129. The kit is designated as a critical application item, and the use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification requirements unless explicitly authorized. Packaging must follow DLA-specific requirements, and the delivery destination is the Central Receiving Warehouse at DLA Distribution Barstow, California. Preservation and packaging methods, including wrap and cushioning materials, are to be specified as ZZ per the contract’s packaging data. The item must be shipped to the provided postal address with no deviations allowed, and all transportation logistics must follow referenced DLAD procedures. The contract is issued under DLA’s authorized unit of issue, and technical and quality requirements linked via R or I numbers are governed by the DLA Master List effective on the solicitation or award date, depending on procurement type.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RING, WIPER
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
GASKET, SPIRAL WOUNDThe contract is for the procurement of 20 units of a metallic/flexible graphite spiral wound gasket with part number M16265, rated for 0.750 NPS and 600 PSI, designated by NSN 5330-01-438-5299. The item must conform to current or previously valid revisions of the established part standard, with all units manufactured after the solicitation date required to meet the latest revision. Strict quality and packaging controls are enforced, including compliance with MIL-DTL-117, Type II, Class C, Style 1 for packaging, mandating a medium-duty, waterproof, greaseproof, and opaque sealed bag for all deliveries, including direct vendor delivery, foreign military sales, and stock shipments. This item is manually excluded from the First Destination Packaging program and is not eligible for standard commercial packaging. The contract prohibits the intentional addition of mercury or mercury-containing compounds, with limited exceptions for designated functional uses such as batteries, instruments, or weapon systems, and requires any portable fluorescent lamps or instruments containing mercury to be shockproof with a secondary containment barrier as per NAVSEA 5100-003D. Sampling and verification adhere to MIL-STD-1916 or ASQ H1331, Table 1, or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sampled lots unless otherwise specified. The contract incorporates technical and quality requirements from the DLA Master List, and all suppliers must ensure the item is free of asbestos, with any alternatives requiring formal approval under Clause L30 and Provision 4 conditions. The solicitation number is SPE7L3-26-T-124V, issued on July 21, 2026, with responses due by August 3, 2026, and delivery due within 154 days after delivery order. The contracting activity falls under the Department of Defense, specifically Land Supplier Operations Vehicle Support, with a place of performance in Tracy, CA, and primary point of contact Susan Diamond.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGThe contract is for the procurement of two rigid connecting links for the main landing gear of military equipment, identified by NSN 3040-00-001-3669, with a delivery requirement of 427 days after award. The technical specifications require adherence to SAE AMS-A-225 instead of QQ-A-225, surface roughness compliant with ASME B46.1, geometric tolerancing per ASME Y14.5, and marking in accordance with MIL-STD-130 in place of IM-8. Ozone-depleting chemicals are strictly prohibited, and any substitutions must be approved unless explicitly permitted by the specifications. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; only contractors with approved JCP certification, completed DLA training, and authorized access may receive the controlled data. Cybersecurity maturity is mandated at CMMC Level 2, and the contractor must comply with DLA’s packaging standards, tailored quality requirements, and configuration change management through formal engineering change proposals. Inspection and acceptance must occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. Full and open competition applies, with no set-aside, and all technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements in effect at the RFP issue date. The contracting activity is the Department of Defense, Land Supplier Operations Vehicle Support, with the point of contact listed as Karen McCarley, and performance is designated to Jacksonville, Florida.
Mechanical Power Transmission Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
CASING, FLEXIBLE SHAThe contract pertains to the procurement of a flexible shaft casing assembly, identified by part number 10053603 and NSN 3040-01-525-0768, with a quantity of four units. The item is classified as a critical application item and is being procured under DLA Direct, CONUS coverage, with delivery required within 177 days FOB origin. The quantity is fixed with no variance allowed, and both inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence over this standard. All packaging and labeling must conform to MIL-STD-129, and palletization must adhere to the DLA Packaging Requirements for Procurement. The unit of issue is each, with a total contract value based on an estimated quantity, and the item is not guaranteed to be purchased by the IDC. The contract is issued under solicitation SPE7L3-26-U-0639, with a response deadline of August 5, 2026, and is classified under NAICS code 333613. The contracting office is the Department of Defense, Land Supplier Operations Vehicle Support, with Stephen Weaver as the primary point of contact.
Mechanical Power Transmission Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333618
New
DIBBS
FILTER ELEMENT, INTAKEThis contract is for the procurement of 470 units of a filter element for an intake air cleaner, identified by NSN 2940-01-614-7614 and part numbers DC-VG-1 and 91930899, under solicitation SPE7L3-26-U-0642. The item is classified as a critical application item and is subject to technical and quality requirements referenced from the DLA Master List, which governs specifications based on the solicitation issue date. Delivery must occur within 41 days FOB origin with no variance allowed in quantity, and inspection and acceptance are required at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. The contract is structured as a DLA Direct, CONUS procurement, with a unit price of $470 per unit, resulting in a total estimated value of $220,900, though the quantity is non-binding and may not be fully purchased. The solicitation is a total small business set-aside under NAICS code 333618, with responses due by August 5, 2026, and is managed by the Department of Defense’s Land Supplier Operations Vehicle Support office, with Aaron Moore as the primary point of contact.
Other Engine Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
GASKETThis contract is for the procurement of one gasket with NSN 5330-00-164-3580 under solicitation SPE7L3-26-T-124N, issued by the Department of Defense through the Land Supplier Operations Vehicle Support office. The item must be delivered within 20 days of order to Fort Campbell, Kentucky, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination. The gasket must comply with MIL-STD-130N for identification marking and is exempt from asbestos as defined in FED-STD-313. Packaging must adhere to MIL-STD-2073-1E with specific methods including medium-duty, waterproof, greaseproof, opaque packaging per MIL-DTL-117, Type II, Class C, Style 1, and marking in accordance with MIL-STD-129. No special marking is required. The item is to be palletized following DLA packaging requirements and shipped using traceable freight methods, not parcel post, with the shipment directed to Fort Campbell, KY. The contract references DLA’s Master List of Technical and Quality Requirements for all technical and quality specifications, with revisions controlled by the solicitation issue date. The supplier must ensure all components meet the listed approved part numbers from manufacturers including Taylor Machine Works, Eaton Corporation, Dana Automotive Systems, Linear Motion LLC, General Motors, Mitsubishi Caterpillar Forklift, and Linde Material Handling. The point of contact is Susan Diamond, and the response deadline is August 3, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333612
New
DIBBS
GEAR SECTOR, SPURThis contract pertains to the procurement of a single gear sector, spur with NSN 3020-01-611-7082 and part number MTM-10503, issued by the Defense Logistics Agency under solicitation SPE7L3-26-T-124S. The requirement is for one unit to be delivered within ten days of contract award, with delivery terms set at FOB origin and no variance allowed in quantity. All packaging must comply with ASTM D3951 and MIL-STD-129, and palletization must adhere to DLA’s specific packaging directives, with the DLA Master List of Technical and Quality Requirements taking full precedence over any referenced standards. The item is to be shipped by the fastest traceable means, excluding parcel post, to a U.S. Army facility in Drawsko Pomorskie, Poland, under shipment RDD 555, with the marking and freight address clearly identified. The supply is classified under NAICS code 333612 and is subject to government-only use designations including IPD 05 and DIC A0A. The required delivery date is July 14, 2026, and the solicitation was posted on July 21, 2026, with responses due by August 3, 2026. Technical and quality requirements are incorporated reference-only via the DLA Master List, accessible online, with control determined by the solicitation or award date depending on acquisition size. The point of contact for inquiries is Lee Miller, and the contract is administered under the Department of Defense’s Land Supplier Operations Vehicle Support division. The unit of issue is each, and the total contract value is $1.00.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
LATCH, DOOR, VEHICULARThe contract pertains to the procurement of 107 vehicular door latches identified by NSN 2540-01-321-8351 under solicitation SPE7L3-26-U-0640, with a response deadline of August 5, 2026, and delivery required within 231 days after award. The item is manufactured using a metal casting process requiring specialized tooling, and sourcing inquiries must be directed to designated DLA assistance teams for aviation or land and maritime supply chains. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation issue or award date depending on acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitution requires prior approval unless explicitly permitted by the specification. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, including employees of U.S. companies and their subsidiaries, and DFARS 252.225-7048 applies. Access to controlled technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export training, and DLA authorization. The solicitation is set aside for Women-Owned Small Businesses under NAICS code 332510, and the point of contact for inquiries is Aaron Moore at the Department of Defense’s Land Supplier Operations Vehicle Support. A CMMC Level 2 certification by a third-party assessment organization is also required, and phosphating suppliers must hold specific certification.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details