Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

SEAL, METALLIC, AIRCR

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This firm fixed price contract, currently held by Jamaica Bearings Co. Inc., involves the procurement of 793 metallic seals for aircraft gas turbine engines. The current contract value is 51,584.65 dollars with a potential end date of November 2, 2026. This opportunity is identified as a likely recompete with medium confidence and was competed under the Simplified Acquisition Procedures. The requirement is for a source controlled item that must be manufactured and tested according to limited rights data, meaning only vendors with access to this data or approved source traceability should bid. Key compliance mandates include CMMC Level 2 certification, strict adherence to DLA packaging and marking requirements, and a prohibition on the intentional addition of mercury. Performance is tied to specific configuration control standards and the delivery timeline is set for 171 days after the order.

General Info

Jamaica Bearings Co. Inc. provides 793 aircraft engine metallic seals for 51,584.65 dollars.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Office AddressUSA
Contacts
Rahsaan Deloney
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Predicted recompete opportunity based on federal award data.
Current Contract: SPE4A726P9041 Incumbent: JAMAICA BEARINGS CO. INC. Contract Value: $51,584.65 Potential End Date: 2026-11-02T00:00:00.000Z Competition: COMPETED UNDER SAP Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 55/100)
SEAL,METALLIC,AIRCR
SEAL, METALLIC, GAS TURBINE ENGINE
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE
MANUFACTURED AND TESTED IN ACCORDANCE WITH THE
CITED LIMITED RIGHTS DATA. THE GOVERNMENT CAN
NOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO
HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACE
ABILITY TO THE APPROVED SOURCES SHOULD QUOTE.
SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS
CONSIDERING SOURCE APPROVAL.
CONFIGURATION CONTROL APPLIES
FURNISHED ITEM MUST CONFORM TO THE CITED
SPE4A7-26-T-122V
SECTION B
REQUIREMENTS/REVISION. VARIATIONS MUST BE
IDENTIFIED AND APPROVAL OBTAINED IN ACCORDANCE
WITH MIL-STD-973 DATED 17 APR 92 AND INTERIM
NOTICE 3 DATED 13 JAN 95. PARAGRAPH 5.4.2
REQUIREMENTS FOR ENGINEERING CHANGE PROPOSALS
AND APPENDIX D NSN/Part Number: 2840-01-518-1013 Quantity: 793 EA Purchase Request: 7015993306QTY: 793 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
Federal
TURBO SUPERCHARGER / NSN 2950-01-714-4392 / JOINT LIGHT TACTICAL VEHICLE
Solicitation # SPE4A727R0102
DLA Aviation

POSTED

about 2 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
Federal
SHROUD SEGMENT,TURB
Solicitation # SPRPA127QXA54
Pa DLA Aviation At Philadelphia

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336412
New
Federal
GUARD,GASOLINE ENGI
Solicitation # N0038327QTA11
Solicitation N0038327QTA11, issued on October 8, 2026, by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the procurement of a Gasoline Engine Guard, identified by NSN 2810-01-737-5535. The government intends to make a single award to a responsible offeror based on a best-value determination where past performance is considered more important than price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System to assign color ratings, while price serves as a secondary factor. Quotations are due by November 9, 2026, and the required delivery period is 90 days FOB Destination to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1 and MIL-STD-129, with specific requirements for domestic and overseas shipments. Contractors must comply with cybersecurity standards outlined in NIST SP 800-171 and DFARS 252.204-7012. Quality management compliance with ISO 9001 or SAE AS9100 is required, and inspection and acceptance will occur at the origin. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment, and compliance with the Buy American and Balance of Payments Program. Offerors must also provide hazardous material certifications and safety data sheets if applicable.
Navsup Weapon Systems Support

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336412
New
Federal
TURBOSUPERCHARGER,E
Solicitation # SPRMM127QMA08
SPRMM1 DLA Mechanicsburg

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
New
Federal
FRAME,TURBINE,AIRCR
Solicitation # SPRPA127QXA28
Pa DLA Aviation At Philadelphia

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336412
New
Turbine Engine Blade Supplier (NSN 2835-01-4575652)
SPRMM1 DLA Mechanicsburg

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336412
New
DIBBS
Manufacturing of Seal Retaining Plates (P/N 3014893)This subcontract involves the manufacturing of four precision-machined seal retaining plates for aircraft engine projects under the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for fabricating the plates according to Pratt & Whitney Canada Corp P/N 3014893 specifications, utilizing specialized precision machining equipment suitable for critical application items. Strict quality assurance and inspection protocols must be followed, adhering to MIL-STD-1916, ASQ H1331, and MIL-STD-105/ASQ Z1.4 standards. Additionally, the provider must ensure full compliance with DFARS 252.225-7001 regulations. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
Oil Pressure Cover SupplyThis subcontract through the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division involves the manufacture or sourcing of six oil pressure covers under NSN 2840-01-029-5266. The selected provider will supply these components to prime contractors, ensuring all units meet strict quality standards. Compliance requires the use of MIL-STD-1916 for quality inspections and MIL-STD-105/ASQ Z1.4 for determining sample lot sizes, with a mandate for zero non-conformance acceptance. Eligible bidders must possess a valid UEI and CAGE code to participate in this procurement effort.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
Heatshield Stiffener Fabrication (NSN 2835-01-324-4956)This subcontract involves the fabrication of 90 heatshield stiffeners for non-aircraft gas turbines to support DLA supply contracts. The manufacturer must produce the units in strict accordance with Basic Drawing NR 53711 5750011 Rev G and Reference Drawing NR 53711 0900-LP-060-4010 Rev 2. All finished and inspected stiffeners must be delivered according to MIL-STD-1916 standards, and the use of additive manufacturing is explicitly prohibited. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. The project falls under NAICS code 336412 and is managed by the DLA Weapons Support ASC Commodities Division within the Department of Defense. Performance for this contract is located in Tracy, California, with a response deadline of November 5, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
Precision Sheet Metal Fabrication - Engine Shroud AssemblyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, involves the precision fabrication of Engine Shroud Assemblies for prime contractors. The scope of work requires specialized sheet metal fabrication adhering to MA-122, surface texture finishing per ASME B46.1, and marking in accordance with MIL-STD-130. To successfully execute the contract, the provider must utilize precision forming equipment and surface texture verification tools to deliver completed assemblies and First Article units. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336412. Strict compliance standards are mandatory, including the maintenance of CMMC Level 2 certification and adherence to Northrop Grumman Licensing Agreements. Interested parties must respond by November 3, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
DIBBS
First Article Testing and Certification for Aircraft Connector AssembliesThis HUBZone set-aside subcontract, issued by the DLA Weapons Support Fluid Handling Division, involves First Article Testing and Certification for aircraft connector assemblies, specifically for NSN 1710-00-831-6821. The selected contractor will support prime contractors by executing FAT protocols, performing detailed measurements and inspections, and generating formal validation reports to verify manufacturing processes. Performance of these services requires the use of certified metrology equipment and CSI-standard testing capabilities. The project is based in New Cumberland, Pennsylvania, and requires the delivery of one tested unit along with a comprehensive FAT report. Interested parties must respond by November 9, 2026, under NAICS code 336412.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336412
New
DIBBS
Manufacturing of Exhaust Gas Oxygen Emission Control SensorsThis small business set-aside subcontract involves the fabrication and assembly of six exhaust gas oxygen emission control sensors for the Department of Defense under DLA Weapons Support Land Supplier Operations Engines. The contractor must build the units in strict accordance with TDP Rev A Gen 3 and Basic Drawing NR 53711 8599721, while ensuring full compliance with MIL-STD-2073-1E packaging standards and NAVSEA 5100-003D mercury containment protocols. Due to the handling of ITAR and EAR data, the successful bidder is required to maintain CMMC Level 2 and JCP certifications. Performance for this project will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
Federal
VALVE ASSY,RELIEF, NSN 1560-014720353, Part-Number 4951062 and 101158-1, Weapon System Designator Code CXN
Solicitation # SPE4A727R0090
DLA Aviation is seeking a firm fixed price contract for the procurement of 106 relief valve assemblies, identified by NSN 1560-014720353 and part numbers 4951062 and 101158-1. This requirement falls under NAICS code 336413 and is designated for weapon system designator code CXN. The competition is categorized as other than full and open, and the final award decision will be based on a combination of price, past performance, and other evaluation factors. The delivery schedule is set for 524 days after receipt of order, with FOB, inspection, and acceptance all occurring at the origin. Prospective bidders must possess enhanced JCP certification to be eligible. The solicitation is expected to be issued around November 13, 2026, and will be available exclusively through the DLA Internet Bid Board System. Performance for this contract is associated with Cherry Point, North Carolina.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336413
New
Federal
HELICOPTER, BLACKHAWK, UH-60A; FOLD SET, ROTARY WIN
Solicitation # SPE4A72750051
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 541380
New
Federal
Aviation Controller Inspection and Functional TestingThe Aviation Controller Inspection and Functional Testing subcontract involves providing independent inspection and functional testing services for prime contractors supporting DLA Aviation projects. The scope of work includes conducting environmental stress screening, functional input/output testing, and final quality inspections. These tasks require the use of specialized equipment such as signal generators, oscilloscopes, and environmental chambers to ensure all units meet strict performance standards. Compliance is mandatory with AS9100 and MIL-STD testing protocols to maintain aviation quality and safety. The selected provider is responsible for delivering comprehensive certified test reports and detailed inspection logs for every unit processed. This opportunity falls under NAICS code 541380 and is managed through the Department of Defense.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 423850
New
Federal
Aerospace Component Supply (Switches, Joysticks, Sensors)This subcontract under DLA Aviation involves the supply of high-reliability aerospace components, specifically switches, sensors, and interactive input devices, to prime contractors. The scope of work focuses on the procurement of individual component parts, including tactile sensors and aerospace-grade potentiometers, with a particular emphasis on managing long-lead time items and addressing diminishing manufacturing sources to maintain a steady supply chain. To ensure compliance with Department of Defense standards, the provider must maintain full traceability documentation and provide Certificates of Conformance for all delivered parts. The contract falls under NAICS code 423850 and is dedicated to supporting critical aviation infrastructure through the delivery of specialized hardware.
Service Establishment Equipment and Supplies Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332710
New
Federal
Hand Controller Housing and Mechanical Chassis FabricationThis subcontract for DLA Aviation involves the fabrication of hand controller housings and mechanical chassis, specifically focusing on external casings, ergonomic grips, and internal chassis for prime contractors. The scope of work requires CNC machining, including milling, turning, and finishing of high-strength polymers or aerospace-grade metals, adhering strictly to specifications provided by Mason Electric or Rockwell Collins. Qualified providers must possess the necessary CNC mills and lathes and maintain AS9100 or ISO 9001 certification to ensure aerospace quality standards. The final deliverables consist of finished mechanical housings and chassis, with the solicitation posted on October 28, 2026, and a response deadline of October 30, 2026.
Machine Shops

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 334418
New
Federal
Interactive Hand Controller PCB and Electronics AssemblyThe Interactive Hand Controller PCB and Electronics Assembly subcontract involves the manufacture and assembly of internal printed circuit boards and electronic circuitry for prime contractors supporting DLA Aviation projects. The scope of work encompasses PCB layout, fabrication, surface mount technology assembly, and the soldering of internal circuitry in strict accordance with aviation standards. The final deliverable consists of completed and fully tested electronic circuit assemblies. To qualify for this engagement, providers must possess specialized PCB fabrication equipment and SMT machines. Mandatory certifications include AS9100 and IPC-A-610 to ensure compliance with aerospace quality and reliability requirements. This opportunity falls under NAICS code 334418 and is managed under the Department of Defense.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 336411
New
Federal
CONTROLLER,HAND,INTERACTIVE
Solicitation # SPE4A727R0099
The Defense Logistics Agency Aviation is conducting market research through a sources sought notice for the new manufacture of the Interactive Hand Controller, identified by NSN 5895-015052115. The requirement is for a minimum of 17 and a maximum of 67 units, with approved part numbers including 218-1239-010 from Rockwell Collins, 6100-1001-01 from ATI Engineering Services, and 730-4413 from Mason Electric Co. The scope of work encompasses the entire production lifecycle, including the procurement of component parts, inspection, testing, preservation, packaging, and shipping. Additionally, the selected provider may be responsible for supply chain management, logistics planning, and addressing diminishing manufacturing sources and material shortages. This effort is categorized under NAICS code 336411. While there is no formal solicitation at this time, the government is evaluating potential market capacity to determine if the requirement will be set aside for small businesses or pursued through full and open competition. Interested parties must submit their organization details and tailored capability statements to Montana Kipp by October 30, 2026. Evaluation will focus on the provider's ability to secure necessary financial and technical resources and implement a project management plan that ensures cost containment, schedule compliance, and risk mitigation.
Aircraft Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 333310
New
Federal
CASE,OPTICAL INSTRUMENT
Solicitation # SPE4A727R0097
DLA Aviation is soliciting quotes for an unrestricted Indefinite Quantity Contract (IQC) with a five year base period for the manufacture of Optical Instrument Cases, NSN 5855-01-609-6252, Part Number OFM-2054-A1. The requirement includes the procurement of component parts, inspection, testing, packaging, and shipping. The estimated annual demand is 305 units, with a minimum delivery order quantity of 76 units and a maximum of 305 units. Delivery is required within 120 days after receipt of order, with inspection and acceptance occurring at the destination and shipping terms set as FOB Origin. The solicitation is scheduled to be issued on November 13, 2026, and will close on December 12, 14, 2026, with offers submitted in writing via the DLA Internet Bid Board System. Award decisions will be based on an equal weighting of price, past performance, and delivery, and the Supplier Performance Risk System will be applied. Prospective suppliers must be registered in the System for Award Management. While EEO clearance is not required and progress payments are not authorized, certified cost and pricing data may be requested.
Commercial and Service Industry Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 336413
New
Federal
NSN 6220-01-434-1886 - LIGHT ASSEMBLY, INDICATOR
Solicitation # SPE4A6-27-R-0077
This indefinite quantity contract, issued by DLA Aviation, is for the procurement of 54 indicator light assemblies for use in F-16 aircraft. The requirement specifies Luminescent Systems, Inc. part number 89-00173-001 as an approved source. The contract features a five-year base period without additional options, with pricing evaluated based on an estimated annual demand of 54 units. Delivery is set as FOB Origin to various facilities within the Continental United States, with a required delivery schedule of 191 days after receipt of order. The solicitation is unrestricted and will be available via DIBBS around November 13, 2026, with a response deadline of December 14, 2026. Prospective offerors must submit a completed physical solicitation package, as electronic offers are not acceptable. While the total value is not expected to exceed the TINA threshold, contractors should be prepared to provide certified cost and pricing data if requested.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 2 months
View Details
NAICS: 336411
New
Federal
AIRCRAFT, STRATOLIFTER, C/KC-135; IGNITER, SPARK, A/C HEATER
Solicitation # SPE4A727R0074
Aircraft Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
Federal
WASHER,FLAT - 40A /HELICOPTER, BLACK HAWK UH-60A, UH-60L, HH/UH-60M, UH-60V
Solicitation # SPE4A627R0086
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 336412
Federal
29--BODY ASSEMBLY
DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

N/A
View Details
NAICS: 336412
Closed
Federal
29--SPLINE,MAIN DRIVE S
Solicitation # SPE4A725T320Z
DLA Aviation

POSTED

over 1 year ago

CLOSED

over 1 year ago
View Details
NAICS: 336412
Awarded
Federal
28--CAP ADAPTER ASSY
Solicitation # N0038325QS179
Navsup Weapon Systems Support

POSTED

over 1 year ago

CLOSED

over 1 year ago
View Details
NAICS: 336412
Closed
Federal
FMS Spares Buy F100 Connecting Link
Solicitation # FD20302501341
FA8121 Afsc Pzaaa

POSTED

over 1 year ago

CLOSED

over 1 year ago
View Details
NAICS: 336412
Awarded
Federal
29--GEAR ASSY,PLANETARY
Solicitation # SPE4A525T169Z
DLA Aviation

POSTED

over 1 year ago

CLOSED

over 1 year ago
View Details
NAICS: 336412
Closed
Federal
29--PARTS KIT,FUEL PUMP
Solicitation # SPE4A725T321K
DLA Aviation

POSTED

over 1 year ago

CLOSED

over 1 year ago
View Details
NAICS: 336412
Awarded
Federal
28--CASE,DIFFUSER,TURBI
Solicitation # N0038325RS082
Navsup Weapon Systems Support

POSTED

over 1 year ago

CLOSED

over 1 year ago
View Details
NAICS: 336412
Awarded
Federal
28--TUBE ASSY,FUEL-FLOW
Solicitation # N0038325QS178
Navsup Weapon Systems Support

POSTED

over 1 year ago

CLOSED

over 1 year ago
View Details
NAICS: 336412
Federal
NSN: 2840-00-015-8540OJ Noun: HOUSING,ANTIFRICTIO T56 P/N: 6846935 PR: FD20302300712
Ok DLA Aviation At Oklahoma City

POSTED

over 1 year ago

DEADLINE

N/A
View Details
NAICS: 336412
Federal
F-100 Liner Combustion Ch
Ok DLA Aviation At Oklahoma City

POSTED

over 1 year ago

DEADLINE

N/A
View Details
NAICS: 336412
Federal
SPRTA1-23-R-0171- Spraybar, Pilot Afte (3B)
Ok DLA Aviation At Oklahoma City

POSTED

over 1 year ago

DEADLINE

N/A
View Details
NAICS: 336412
Federal
29--LEVER AND BRACKET ASSEMBLY
DLA Aviation

POSTED

over 1 year ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS