Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SEAL, NONMETALLIC SP

Active
SPE7LX-26-U-9037Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

SPE7LX-26-U-9037.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL,NONMETALLIC SP
SEAL,NONMETALLIC SP
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
DAIMLER TRUCK NORTH AMERICA LLC 64678 P/N WWS 50246-3444
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000238358 0001 EA 33.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:5330015767871
DELIVERY (IN DAYS):0097
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7LX-26-U-9037
SECTION B
PR: 1000238358 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:HB CUSH/DUNN THKNESS:A
UNIT CONT:BV OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

SPE7LX-26-U-9037 NSN/Part Number: 5330-01-576-7871 Quantity: 33 EA Purchase Request: 1000238358QTY: 33 Delivery: 97 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Shear Bolt Manufacturing and SupplyThe contract entails the manufacture and delivery of 9,524 shear bolts designated by NSN 5306-01-123-4603, classified as Critical Safety and Critical Application Items that must adhere to strict military specifications governing quality, traceability, and marking. These components are essential for operational safety and require full compliance with defense standards throughout production, including documented material sourcing, lot tracking, and precise labeling to ensure accountability and reliability in military systems. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 332722 indicating classification under other fabricated metal product manufacturing. The Department of Defense, through its ASC Commodities Division, is the contracting authority, and responses must be submitted by August 6, 2026, following the July 27, 2026 posting date. All work is expected to meet exacting defense requirements without deviation, and the place of performance and point of contact details are not specified in the provided data.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract specifies the procurement of 4 units of a hexagon cap screw, part number 5305-01-698-5982, manufactured to ISO 4017 revision 6 standards with a specification of M12x70-10.9-ZN5/AN, and requires full compliance with DLA packaging, marking, and quality assurance mandates. All items must be packaged in accordance with MIL-STD-2073-1E using Preservation Method 31, wrapped with approved materials, and labeled per MIL-STD-129 without special marking; palletization must meet DLA’s packaging requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The screw must be physically marked per RQ017 and any non-accepted items must have government identification removed per RQ011. Delivery is to the Royal Jordanian Air Force at Prince Hassan Air Base in Safawi, Jordan, with FOB origin terms and a firm fixed price structure. The delivery deadline is 200 days after delivery order issuance, with no variance permitted in quantity. Inspection and acceptance occur at destination, and transportation details adhere to DLA procedural notes C19 and C20. The contract includes compliance with applicable technical and quality requirements referenced from the DLA Master List, and all data, including the NSN, purchase request, and delivery date, is tied to the solicitation SPE4A6-26-Q-1216 with a response deadline of August 3, 2026. The item is intended for government use and the shipment is designated under RDD 777 with a unique tracking identifier, and the material is required no later than June 22, 2026.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
SEAL, PLAINThe contract pertains to the procurement of 241 units of a plain seal identified by NSN 5330-01-546-8128 under solicitation SPE7L3-26-T-134W, with a response deadline of August 7, 2026, and delivery required within 150 days after award. The item falls under Federal Supply Class 5330/5331 and must be packaged in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, a requirement applicable to direct vendor delivery, foreign military sales, and stock shipments. The use of asbestos as defined in FED-STD-313 is strictly prohibited. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Government identification must be removed from any non-accepted supplies. The contract is issued by the Department of Defense through Land Supplier Operations Vehicle Support, with performance to be delivered to New Cumberland, Pennsylvania, and primary point of contact is Susan Diamond at DLA’s procurement office.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
FASTENER ASSEMBLY, TThe contract pertains to the procurement of a FASTENER ASSEMBLY, T, identified by NSN 5325-01-481-9443 and part numbers including CA17202F4TXR and MT172AC6F-4, sourced from approved manufacturers such as HOWMET GLOBAL FASTENING SYSTEMS INC. and AVIBANK MFG., INC. The requirement is for exactly 10 units to be delivered within five days of award, with no tolerance for variance in quantity, and delivery is FOB origin with inspection and acceptance taking place at the destination. Packaging must strictly comply with MIL-STD-2073-1E and marking requirements follow MIL-STD-129 without special markings, while palletization adheres to DLA’s packaging standards. The item is designated as a critical application item, triggering stringent quality controls including zero-defect sampling per MIL-STD-1916 or ASQ H1331, with verification levels assigned to critical, major, and minor attributes as VII, IV, and II respectively. The contract incorporates comprehensive technical and quality requirements referenced from the DLA Master List, including tailored higher-level quality provisions for both manufacturers and non-manufacturers, documentation for source approval requests, configuration change management, and the use of calibrated measuring and test equipment. All suppliers must comply with requirements for the removal of government identification from non-accepted supplies and physical identification of bare items. Shipments must be sent by the fastest traceable means—parcel post is prohibited—and delivered to the specified freight address in Jacksonville, Florida, with a required delivery date of June 11, 2026. The solicitation number is SPE4A6-26-T-09VG, issued by the Defense Logistics Agency’s Commodity Division under NAICS code 332722, with point of contact Marchello Fields, and responses are due by August 4, 2026.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
STUD, CONTINUOUS THREADThis contract specifies the procurement of a stud with a continuous thread, identified by NSN 5307-01-502-8735 and part number M1222ST4N12C372NCNN, with a quantity of 21 units to be delivered within 137 days under solicitation SPE4A7-26-T-596V. The item must comply with MIL-DTL-1222J technical specifications, including mandatory surface markings of material symbol, manufacturer’s symbol, and lot number directly applied per MIL-DTL-1222, with precedence order for small fasteners and packaging labeling as fallback. Manufacturer symbols must be registered in MIL-HDBK-57. A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer, along with adherence to CDRL-COQC-19071 and other quality assurance provisions including RQ001, RQ006, RQ009, RQ011, and RQ017. Sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requiring zero non-conformances unless otherwise stipulated. The item is designated as a critical application, and no mercury or mercury-containing compounds may be intentionally introduced into the hardware or its packaging, except for specified functional uses per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with specific preservation, wrapping, and marking protocols, including MIL-STD-129 labeling and prohibition of mercury in preservation or packaging per IP056. Palletization follows DLA packaging requirements. Delivery is FOB origin with no quantity variance permitted, inspected and accepted at origin. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of December 20, 2026, and original delivery date of February 14, 2027. Unit of issue is each, and the contract references DLA’s Master List of Technical and Quality Requirements for applicable technical and quality standards.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, KEYWAYThe contract pertains to the procurement of 370 units of a WASHER, KEYWAY with NSN 5310011794266 under solicitation SPE4A6-26-T-07US, issued by the Department of Defense’s ASC Commodities Division through DLA. Delivery is mandated FOB Origin with a 213-day lead time, and the item must be delivered by February 28, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces zero variance in quantity, with inspection and acceptance performed at the manufacturer’s origin, requiring full compliance with the DLA Master List of Technical and Quality Requirements, which supersede all other standards. The washer must conform to specified military and industry specifications including MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and RP001 for palletization, with all packaging and markings adhering strictly to DLA guidelines. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot unless otherwise stated, and attributes must be classified with AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor, as dictated by the applicable drawing or QAP. Physical identification of bare items must meet RQ017 requirements, and all hazardous materials must be documented per hazard communication standards. The contractor must maintain a quality system compliant with SAE AS9003 or ISO 9001 and adhere to stringent cybersecurity mandates including NIST SP 800-171 for safeguarding controlled unclassified information, as well as DFARS clauses covering whistleblower rights, trafficking in persons, employment eligibility, sustainable products, and prohibition of hexavalent chromium. Payment must be submitted via Wide Area WorkFlow with no alternative invoicing methods permitted. The contract incorporates numerous FAR and DFARS clauses related to contractor conduct, information control, former official compensation, and transportation restrictions, including mandatory use of U.S.-flag vessels for ocean shipping unless waived. The contractor is required to provide a Unique Entity ID and CAGE code, and must complete all socioeconomic and small business representations as applicable, with no modifications allowed to the quantity or delivery terms. All technical and quality requirements referenced in the DLA Master List govern performance, and the contract operates under a simplified
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
BOLT, ASSEMBLED WASHERThe contract pertains to the procurement of 1,365 units of BOLT, ASSEMBLED WASHER with NSN/Part Number 5306-01-481-7860 under purchase request 7017408437. Delivery is required within two days of award, and the solicitation number is SPE4A6-26-T-09YQ with a response deadline of August 4, 2026. The material is classified under NAICS code 332722 and is being procured by the Department of Defense through the ASC Commodities Division. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date for simplified acquisitions. Documentation must adhere to source approval, packaging, quality conformance inspection, and bare item marking requirements as specified by RC001, RP001, RQ006, RQ011, and RQ017. The item has no shelf life restriction and must be delivered to the place of performance in Texarkana, Texas, with no government identification to be removed from non-accepted supplies. Primary point of contact is Debra Fowler, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCESCREW, CLOSE TOLERANCE, MACHINE, NSN 5305-00-956-2432, is being procured under solicitation SPE4A6-26-T-07QH with a quantity of 174 pack groups, each containing 50 units, for delivery within 75 days as directed to Robins Air Force Base, Georgia. The item is classified as a commercial item, fully competitive, and governed by military specifications with technical and quality requirements sourced exclusively from the DLA Master List of Technical and Quality Requirements, which supersedes standard industrial standards such as ASTM D3951 when conflicts arise. Inspection and acceptance occur at the manufacturer’s facility with zero non-conformances required in sampling under MIL-STD-1916 or ASQ H1331, or alternatively under MIL-STD-105/ASQ Z1.4 with zero defective acceptance unless otherwise stipulated. Critical thread dimensions for Class 3A and 3B threads must conform to SPE4A6-26-T-07QH and FED-STD-H28/20 System 22, excluding small internal and external threads below specified diameters. Direct part marking complies with MIL-STD-130N and packaging must follow MIL-STD-129 and RP001 for DLA-specific packaging, with barcoding and labeling including government identification that must be removed from non-accepted items. The contract mandates compliance with the Cybersecurity Maturity Model Certification Level 2, NIST SP 800-171, and safeguarding of covered defense information under DFARS clauses. All contractual obligations fall under a fixed-price contract structure with no option quantities specified, and payment is mandatory through WAWF. Offerors must possess a valid UEI and CAGE code, represent size and socioeconomic status accurately, and comply with trafficking in persons, equal opportunity, employment eligibility, sustainable products, and hazardous material labeling requirements. No pricing detail is provided in the solicitation, and award will be determined by the contracting officer based on technical acceptability and price, though the specific evaluation method—LPTA or trade-off—is not disclosed. All submissions must be made electronically via DIBBS by the stated deadline, and contract administration is handled by ASC Commodities Division under the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINEThe contract specifies the procurement of 3,398 machine bolts identified by NSN 5306-01-293-9534 and part number MS35764-235, manufactured in accordance with MIL-DTL-45912C and MS35764H standards, with all hardware produced after the solicitation date required to meet the current revision of these standards. The item is classified as a commercial item and a critical application item, subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling conducted under MIL-STD-1916 or ASQ H1331, Table 1, using zero-defect acceptance unless otherwise stated. Identification markings must comply with MIL-STD-130N alongside manufacturer logos and material codes, and all packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA's specific packaging directives, superseding any conflicting standards. Delivery is FOB origin with a required delivery date of December 30, 2026, and a need ship date of December 20, 2026, under a 137-day delivery timeline. The contract enforces a zero variance tolerance on quantity, with both inspection and acceptance occurring at origin. Packaging and labeling must reflect the specified Unit of Issue and Quantity per Unit Pack as defined in the purchase order, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The item is to be delivered to DLA Distribution Anniston at the designated parcel post and freight shipping address, with the contracting officer identified as Carl Younce and the solicitation issued under SPE4A6-26-T-09XA, with a response deadline of August 4, 2026.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, ASSEMBLED WASHERThe item is a screw with an assembled washer, identified by NSN 5305-01-164-5837, with a quantity of 3,553 units required under purchase request 7017272336. Delivery is due within 165 days after award. The solicitation, numbered SPE4A6-26-T-09WY, was posted on July 27, 2026, with responses due by August 4, 2026, and is a total small business set-aside under FAR 19.5, classified under NAICS code 332722. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. Export control rules apply to technical data associated with this item, subject to ITAR or EAR regulations; disclosure to foreign persons, including foreign nationals within the U.S., requires prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and formal approval from DLA. Packaging must meet DLA procurement standards. The contracting activity is the ASC Commodities Division of the Department of Defense, with performance located in Texarkana, Texas, 75507-5000. Primary point of contact is Ashley Jones, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAININGThe contract solicitation SPE4A6-26-T-07LU is issued by the Defense Logistics Agency under the Department of Defense for the procurement of 8,104 retaining rings, identified by NSN 5325-00-720-8064, with delivery required 169 days after order placement, no later than September 3, 2027. The items are to be delivered FOB origin to SW3119, DLA Distribution Warner Robins, Robins AFB, GA, with inspection and acceptance occurring at the contractor’s shipping point. Packaging must strictly conform to MIL-STD-2073-1E using Code U, BD, and E5/ES containers, with no preservation materials allowed and prohibition of mercury or mercury compounds in both packaging and preservation. Marking must comply with MIL-STD-129, including bare item marking per RQ017, with hazard labeling aligned with OSHA's Hazard Communication Standard and DFARS 252.223-7001, requiring submission of Safety Data Sheets for any hazardous materials. The contract prohibits hexavalent chromium in all applications, restricts storage or disposal of toxic materials without prior approval, and enforces compliance with U.S. export control laws including ITAR and EAR. Contractors must implement NIST SP 800-171 security controls to protect Covered Defense Information and report cyber incidents within 72 hours, with these requirements flowed down to subcontractors. The acquisition is subject to restrictions on sourcing from Communist Chinese Military Companies and from covered defense telecommunications equipment listed under DFARS 252.204-7018. Pricing is not disclosed, rendering total contract value unknown, with payment processed electronically via WAWF. Offerors must hold a valid UEI and CAGE code and represent their size and socioeconomic status, including small business, HUBZone, SDB, WOSB, EDWOSB, or SDVOSB designations, and compliance with federal clauses related to equal opportunity, employment verification, anti-trafficking, and safeguarding of information systems. Proposals must be submitted electronically through DIBBS by July 30, 2026, with all technical and compliance documentation meeting stringent federal and DoD standards.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
WASHER, VANEThe contract pertains to the procurement of a commercial off-the-shelf washer, vane, identified by part number 2311146-1 and NSN 5310-01-602-6673, with a quantity of 14 units to be delivered FOB origin. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The item is exempt from Item Unique Identification per DFARS 252.211-7003(c)(1)(i). Sampling inspection must comply with MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances for acceptance unless otherwise specified, with attribute verification levels assigned as VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required and palletization following DLA packaging standards. Delivery is due within 171 days to the designated receive warehouse in Tracy, California, with no variance allowed in quantity. The contract does not specify a need for supplier manufacturing, but non-manufacturers must meet tailored higher-level quality requirements. Original delivery was required by June 13, 2027, though the need ship date is set for January 3, 2027. Inspection and acceptance occur at destination, and transportation logistics are aligned with DLA procedural notes C19 and C20. The procurement is under solicitation SPE4A5-26-T-280G, issued by the Department of Defense’s ASC Supplier Oper OEM Division, with Jessica Baake as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 332722
New
DIBBS
PLATE, FUSE, COVERThe contract pertains to the procurement of 12 units of PLATE, FUSE, COVER with NSN 5340-01-603-1533 under solicitation SPE7LX-26-U-9039, issued by the Strategic Acquisition Program Directorate within the Department of Defense. The requirement is a total small business set-aside under FAR 19.5, with a NAICS code of 332722, indicating it targets manufacturers in the fabricated metal product industry. The solicitation was posted on July 27, 2026, with a response deadline of August 11, 2026, and delivery must be completed within 116 days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions. Government identification must be removed from any non-accepted supplies, and all deliverables must comply with DLA packaging standards. All correspondence and contract administration are managed by the primary point of contact, Theodore Misiolek, reachable via email and phone provided. The contract is administered through the DIBBS system, with full details accessible via the provided UI link.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332439
New
DIBBS
BRACKET, MOUNTINGThe contract is for the procurement of 102 mounting brackets identified by NSN 5340-01-474-9584 under solicitation SPE7LX-26-U-9030, with a response deadline of August 11, 2026, and delivery required within 116 days after order. This is a total small business set-aside under FAR 19.5, classified under NAICS code 332439, and managed by the Department of Defense’s Strategic Acquisition Program Directorate. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Compliance with MIL-STD-130N, dated November 16, 2012, for identification marking of U.S. military property is mandatory, and suppliers must remove government identification from any non-accepted supplies. All performance and delivery obligations are tied to federal procurement standards, with the primary point of contact being Theodore Misiolek, reachable via email or phone provided.
Other Metal Container Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
COVER, FITTED, VEHICULARThe contract solicitation SPE7LX-26-U-8785 outlines the procurement of a fitted vehicular cover in tan, identified by NSN 2540-01-558-7518, under a Small Business Set-Aside as defined by FAR 19.5 and classified under NAICS code 336390. The estimated annual quantity is 333 units, with a guaranteed minimum contract quantity of 49 units once binding, and a maximum contract value of $350,000. Delivery is required within 81 days of award, with FOB Origin shipping terms, and all supplies are subject to inspection and acceptance at the destination. The unit of issue is each (EA), and the quantity per unit pack is specified as 001. Packaging must comply with DLA Master List of Technical and Quality Requirements, which override ASTM D3951, and palletization must conform to RP001. All packaging and labeling must adhere to MIL-STD-129. If the item is hazardous under FED-STD-313, it must be packaged to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. The contractor must also comply with federal hazardous material regulations including 29 CFR 1910.1200 and the Hazard Communication Standard, submitting labels and safety data sheets for non-listed hazardous materials prior to award. The acquisition is structured as an Indefinite Delivery Contract with a one-year performance period, allowing task or delivery orders to be issued within that window, potentially to multiple destinations. Payment must be processed electronically via the Wide Area WorkFlow (WAWF) system, with invoice and receiving report formats determined by the nature of the line item—fixed-price orders require both an invoice and receiving report. The contractor must maintain active registration in the System for Award Management (SAM), complete all applicable representations and certifications, including socioeconomic status, employment eligibility, trafficking in persons, and equal opportunity for workers with disabilities, all under Deviation 2026-00038. Provisions mandate compliance with the Buy American Act and Berry Amendment, and prohibit the use of covered defense telecommunications equipment from Communist Chinese military companies or hexavalent chromium. Cybersecurity requirements under FAR 252.204-7012 apply, requiring safeguarding of covered defense information and reporting of
Other Motor Vehicle Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339991
New
DIBBS
PACKING ASSEMBLYThis contract solicitation, identified as SPE7LX-26-U-8782, is a Women-Owned Small Business Set-Aside for the procurement of 12,321 units of a packing assembly identified by National Stock Number 5330-01-096-9181, with an estimated annual demand and maximum contract value of $350,000. The delivery deadline is 98 days after the date of order, with a guaranteed minimum order of 1,848 units once the contract is binding, and individual delivery orders must meet a minimum of 513 units. The item is classified as a Type I shelf-life item with a non-extendable shelf life of 180 months and must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to protect against UV degradation of labeling, particularly for Federal Supply Classifications 5330/5331. All items must be free of asbestos, and packaging and marking must comply with MIL-STD-129 and MIL-STD-130N for identification and shipment, including Special Marking Code 32 for shelf life. The assembly is subject to strict hazardous materials handling requirements, including compliance with DFARS 252.223-7001 for hazard labeling, submission of Safety Data Sheets, and adherence to IP025 for hazardous material shipping. Additive manufacturing is prohibited for all components unless explicitly authorized, and failure to submit required Safety Data Sheets results in automatic disqualification. The delivery point is destination, with inspection and acceptance occurring at the final destination per FAR 52.246-2. The contractor must use the Wide Area WorkFlow system for all payment and receiving report submissions and comply with all applicable Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, including cybersecurity safeguards under 252.204-7012 and NIST SP 800-171 assessment requirements with a deviation. The contractor must maintain current representations in the System for Award Management, including small business status and compliance with prohibitions on covered defense telecommunications equipment. The contract prohibits mercury contact with hardware except for specific approved uses, requires shock-proof containers with a second containment boundary for mercury-containing items, and mandates adherence to the DLA Master List of Technical and Quality Requirements
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
BRACKET, MOUNTING
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, DUSTThis solicitation, SPE7LX-26-U-8784, issued by the Department of Defense’s Strategic Acquisition Program Directorate, seeks protective dust and moisture seals under NSN 5340-01-517-9220 for a Small Business Set-Aside under NAICS code 332510. The contract is structured as a unilateral indefinite delivery contract with a one-year period of performance, not binding until a delivery order is issued and accepted. The estimated quantity is 40 units at a unit price of $8,750, resulting in an estimated contract value of $350,000, with a guaranteed minimum order of six units and a minimum delivery order quantity of 20 units. Delivery is required within 41 days from the date of order, FOB origin, and all items must be inspected and accepted at the destination. The product must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards. Packaging must follow ASTM D3951 for non-hazardous material or TQ Requirement IP025 if deemed hazardous under FED-STD-313, with palletization conforming to RP001 and all labeling adhering to MIL-STD-129; the QUP is specified as 010. The contractor must maintain current SAM registration, including representation of small business status, and comply with cybersecurity provisions including safeguarding covered defense information under FAR 52.204-7012, reporting cyber incidents, and adhering to NIST SP 800-171 requirements. Compliance with the Buy American Act and Berry Amendment applies, and the contractor is responsible for the safety of personnel and property under applicable federal, state, and local regulations. Invoicing and payment are processed exclusively through WAWF, requiring both an invoice and receiving report unless exceptions apply, and contractors must be registered in WAWF with a valid SAM electronic business point of contact. Representations regarding prohibited equipment, trafficking in persons, whistleblower rights, and restrictions on mandatory arbitration agreements are incorporated and binding. All submissions must be received by the deadline of July 27, 2026, and correspondence should be directed to Theodore Misiolek at the provided DLA email.
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336390
New
DIBBS
GUARD, SPLASH, VEHICULAR
Other Motor Vehicle Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332439
New
DIBBS
CASTER, SWIVELThe contract solicitation SPE7LX-26-T-0806 seeks 22 units of CASTER, SWIVEL with NSN 5340-00-995-8391 under a simplified acquisition procedure, with a delivery requirement of 77 days ADO to New Cumberland, PA 17070-5002. The procurement is not designated as a small business set-aside and is governed by the Federal Acquisition Regulation with multiple deviations effective February 2026, specifically affecting clauses related to the System for Award Management, contract type, solicitation terms, small business representation, equal opportunity, trafficking in persons, employment eligibility, hazardous materials, sustainable products, changes, subcontracts, and inspection. Technical and quality requirements are controlled by the DLA Master List of Technical and Quality Requirements, which supersedes ASTM D3951, and must be met per RA001, with packaging and marking adhering to RP001 and MIL-STD-129. All items must bear identification marking per MIL-STD-130N, and non-accepted supplies must have government identifiers removed per RQ011. Hazardous materials must be labeled in compliance with OSHA’s Hazard Communication Standard and packaged according to TQ requirement IP025 if classified under FED-STD-313. The contract mandates use of the Wide Area Workflow system for invoicing and receiving reports, requiring contractor registration in SAM and WAWF. Inspection and acceptance occur at destination per FAR 52.246-1, and all submissions must include current representations and certifications in SAM including size status, socioeconomic designations, and Berry Amendment compliance, with non-domestic material disclosures required. The solicitation is open to responses by close of business on July 27, 2026, and is issued under the authority of the Department of Defense, Strategic Acquisition Program Directorate.
Other Metal Container Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333612
New
DIBBS
TRANSMISSION, MECHANICA
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
GASKET
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details