Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SEAL, NONMETALLIC SPECI

Active
SPE4A5-26-T-414EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 19 units of a nonmetallic special shaped section seal, identified by NSN 5330-01-521-3030 and Boeing part number 74B430929-101. The item is designated as a critical application item and must be delivered to DLA Distribution San Diego. The delivery timeline is set for 171 days after order, with a required delivery date of May 3, 2028. The agreement mandates strict adherence to DLA technical and quality requirements, including CMMC Level 2 self-assessment and specific packaging standards to protect the material from ultraviolet rays using opaque, waterproof bags. Quality assurance will be managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Inspection and acceptance will occur at the destination, and the contract specifies a zero percent quantity variance.

General Info

Procurement of 19 critical Boeing seals for DLA San Diego by May 3, 2028.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-414E Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUSA
Contacts
BRAXTON BYERSON
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL,NONMETALLIC SPECIAL SHAPED SECTION
SEAL,NONMETALLIC SP
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 76301 P/N 74B430929-101
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A5-26-T-414E
SECTION B
PR: 7018248006 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018248006 0001 EA 19.000
NSN/MATERIAL:5330015213030
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
SPE4A5-26-T-414E
SECTION B
PR: 7018248006 PRLI: 0001 CONT’D
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:03/08/2027 Original Required Delivery Date:05/03/2028
SPE4A5-26-T-414E NSN/Part Number: 5330-01-521-3030 Quantity: 19 EA Purchase Request: 7018248006QTY: 19 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
COUPLING, FLEXIBLE
Solicitation # SPE4A7-26-R-0778
Solicitation SPE4A7-26-R-0778 is a request for an Indefinite Quantity Contract (IQC) issued by DLA Aviation for the procurement of flexible couplings, identified as NSN 1660-00-560-4009. The contract features a three-year base period with a guaranteed minimum quantity of 42 units and an estimated annual quantity of 120 units. This item is designated as a Critical Application Item, with approved part numbers from The Boeing Company, Arrowhead Products Corp, and Flexible Technologies Inc. The required delivery schedule is 365 days after receipt of order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including source approval requests and tailored higher-level quality requirements. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Additionally, the contractor must complete a CMMC Level 2 self-assessment and comply with DFARS regulations regarding covered defense information and the Buy American program. Item Unique Identification is not required per the service customer's request. Payment and receiving reports must be processed electronically through the Wide Area Workflow system.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-237G
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 407 units of preformed packing under NSN 5330-00-922-5947. The contract is open for full and open competition with a delivery requirement of 46 days after the order is placed. The items must be completely free of asbestos, and any alternative materials must be approved according to specific regulatory clauses. The procurement is subject to several technical and quality requirements, including DLA packaging standards and configuration change management protocols. Notably, the items are classified as Type I (Code Y) with a non-extendable shelf life of 180 months. All suppliers must adhere to the DLA Master List of Technical and Quality Requirements and comply with regulations regarding covered defense information and the removal of government identification from non-accepted supplies.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
Federal
SEAL ASSEMBLY KIT
Solicitation # 7017777381
This sources-sought notice issued by DLA Land and Maritime is for a Seal Assembly Kit under NSN 5330-014629466. The current approved source is Curtiss-Wright Electro-Mechanical Corp. Due to the AMC/AMSC designation of 3D, the item is typically procured from the actual manufacturer because the technical data required for competitive solicitation is not economically available or physically accessible. The agency is seeking additional qualified sources capable of manufacturing these items. Interested companies may submit information to Contract Specialist Amber Rohly by the response deadline of September 19, 2026. To become an approved source, applicants must submit a Source Approval Request package through the DLA Land and Maritime program to demonstrate that their product meets or exceeds the quality of the original equipment manufacturer.
DLA Land And Maritime

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
53--PARTS KIT,SEAL REPLACE
Solicitation # SPE7L3-26-T-248P
Solicitation SPE7L3-26-T-248P is a request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of three seal replacement parts kits for mechanical equipment, identified by NSN 5330015981569. This is a fixed-price contract designated as a total small business set-aside under NAICS code 339991. The approved source is listed as 0B9E8 70J600-5. Quotes must be submitted electronically via the DIBBS system by the deadline of September 21, 2026. The required delivery date is November 11, 2027, with a need ship date of March 9, 2027, and a delivery period of 168 days. Delivery is FOB Destination to DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for UV-sensitive items to be sealed in opaque bags per MIL-DTL-117. The contract incorporates various FAR and DFARS clauses, including the Buy American Act and Berry Amendment restrictions. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system. Award may be determined via an automated process, and a HUBZone price evaluation preference may be applied.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
53--SEAL,INFLATABLE
Solicitation # SPE7L3-26-T-247F
Solicitation SPE7L3-26-T-247F is a Request for Quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of 11 inflatable seals identified by NSN 5330002252287. This procurement is set aside exclusively for SBA-certified Women-Owned Small Business (WOSB) concerns. The solicitation was posted on September 11, 2026, with a response deadline of September 21, 2026. Quotes must be submitted electronically via the DIBBS system. The required delivery date is April 11, 2027, with a need ship date of January 22, 2027, and shipping terms are FOB Destination to the DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking and MIL-STD-130N for identification. Due to the nature of the items, they must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 and comply with MIL-STD-2073-1E and RP001 for palletization. All supplied items must be free of asbestos. Offerors must comply with the Buy American Act and the Berry Amendment, providing full disclosure if non-domestic materials are used. Payment and invoicing will be processed electronically through the Wide Area WorkFlow (WAWF) system. The award may be processed as an automated award, and offerors are encouraged to provide quantity ranges in their quotes.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
53--O-RING
Solicitation # SPE7L1-26-T-10U5
Solicitation SPE7L1-26-T-10U5 is a Request for Quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 14 units of O-rings under NSN 5331014745530. This is designated as a critical application item under NAICS code 339991. The procurement is managed by the Land Supply Chain office in Columbus, Ohio, with a response deadline of September 21, 2026. Quotes must be submitted electronically via the DIBBS system. The approved source for this item is 0AZ22 V24509-20-07-18. The delivery requirement is set for 147 days after order, with a need ship date of February 16, 2027, and delivery to DLA Distribution San Joaquin in Tracy, California. The contract specifies FOB Origin terms, while inspection and acceptance will occur at the destination per FAR 52.246-1. Packaging must adhere to MIL-STD-2073-1E and marking must comply with MIL-STD-129. Invoicing and payment processing are required through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. The solicitation incorporates several FAR and DFARS clauses, including those regarding equal opportunity for workers with disabilities, combating trafficking in persons, and sustainable products. Offerors are assumed to provide supplies of domestic origin unless otherwise indicated.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
53--GASKET
Solicitation # SPE7LX-26-U-002P
Solicitation SPE7LX-26-U-002P is a request for quotations from the Department of Defense, specifically the Strategic Acquisition Program Directorate under DLA Land and Maritime, for the procurement of gaskets identified by NSN 5330150110674. This procurement may result in a unilateral Indefinite Delivery Contract with a one-year term or until the aggregate total of orders reaches a maximum value of 350,000.00 dollars. The estimated annual demand is 157 units, with a guaranteed minimum quantity of 23 and an expected average of 12 orders per year. Delivery is required within 97 days of order, with shipments directed to various CONUS and OCONUS DLA Depots. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-117 for the use of medium duty, waterproof, greaseproof, opaque bags to prevent UV deterioration. All quotes must be submitted electronically via the DIBBS portal by September 25, 2026. Award evaluation will be based on the price quoted for the estimated annual demand. Additionally, contractors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and utilize the Wide Area Workflow system for all invoicing and receiving reports. Inspection and acceptance will occur at the destination.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
SEAL,AIR,NONAIRCRAF — 2835014700838 — SPRMM126QHE54
Solicitation # SPRMM126QHE54
This solicitation, issued by DLA Mechanicsburg under FAR Part 12 and FAR Part 18 Emergency Acquisition Flexibilities, seeks quotes for the manufacture of non-aircraft air seals. Award evaluations will be based on the Lowest Price Technically Acceptable criteria. The contract requires strict adherence to item unique identification and marking standards per MIL-STD-130, and packaging must comply with MIL-STD 2073. Contractors must provide the Original Equipment Manufacturer details if they are not the manufacturer and must submit invoices and receiving reports electronically via PIEE-WAWF. The agreement includes specific protocols for design changes, requiring a coded notification system for any substitutions. Additionally, the contract mandates that production facility changes be approved in writing by the Contracting Officer and may require a price reduction to cover administrative costs.
SPRMM1 DLA Mechanicsburg

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
SLED
Specialized Gasketing & Sealing Materials Supply
Procurement-Goods & Services

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 339991
New
DIBBS
O-Ring Supply (NSN 5331002639540)
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Supply of Critical Application Gaskets
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Supply of Gaskets (NSN 5330017193193)
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 335132
New
DIBBS
FLOODLIGHT, ELECTRIC
Solicitation # SPE4A5-26-Q-0746
This contract is a solicitation for the procurement of 12 electric floodlights, identified by NSN 6220-01-273-7424 and part number 15-0366-3. The agreement is established as a firm fixed price contract for a critical application item, with delivery required 341 days after order. The items are to be shipped FOB origin to DLA Distribution Jacksonville, with both inspection and acceptance occurring at the destination. The supplier must adhere to strict technical and quality standards, including SAE AS9100 for manufacturers and CMMC Level 2 self-assessment for cybersecurity. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while sampling and inspection will follow MIL-STD-1916 or ASQ H1331. The contract also specifies requirements for source approval documentation and the use of approved measuring and test equipment.
Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 493110
New
DIBBS
Military-Grade Packaging and Palletization Services
General Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332710
New
DIBBS
Manufacturing of Locking Lug Assemblies
Machine Shops

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
Supply of Plain Round Nuts (NSN 5310014178959)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332710
New
DIBBS
Manufacturing of Actuator Housings (NSN 2995-00-772-5869)
Machine Shops

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
Manufacturing of Duct Assembly, Heat Exchanger (NSN 1560-00-264-1351)
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
Supply of Landing Gear Axles (NSN 1620011585930)
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336412
New
DIBBS
29--HOUSING,ACTUATOR,VA
Solicitation # SPE4A5-26-T-419Q
Solicitation SPE4A5-26-T-419Q is a fixed-price request for quotations issued by the Department of Defense, specifically the DLA Aviation ASC Supplier Oper OEM Division, for the procurement of 71 units of actuator housings under NSN 2995007725869. The procurement falls under NAICS code 336412. Quotes must be submitted electronically via the DIBBS system by September 18, 2026. The approved source for this item is 59364 112453-1. The contract requires delivery to the DLA Distribution Depot Oklahoma at Tinker AFB, with a delivery period of 179 days and a required delivery date of September 14, 2026. Inspection and acceptance will occur at the destination. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for palletization and hazardous material labeling. Payment will be processed electronically through the Wide Area Workflow system. Key compliance requirements include adherence to the Buy American Act, the Berry Amendment, and CMMC Level 2 Self-Assessment. The solicitation incorporates various FAR and DFARS clauses, including those regarding equal opportunity for workers with disabilities, combating trafficking in persons, and NIST SP 800-171 assessment requirements. Quality assurance will be managed through zero-based sampling plans such as MIL-STD-1916 or ASQ H1331.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
53--NUT,PLAIN,ROUND
Solicitation # SPE4A5-26-T-419V
Solicitation SPE4A5-26-T-419V is a request for quotations issued by the DLA Aviation, ASC Supplier Oper OEM Division for the procurement of 434 units of plain round nuts, identified by NSN 5310014178959 and part number 497A63101-9. This is a total small business set-aside under NAICS code 332722. Quotes must be submitted electronically via the DIBBS system by September 18, 2026. The required delivery period is 20 days after the award, with the items being shipped FOB Origin to the Puget Sound Naval Shipyard IMF in Bremerton, Washington. The contract requires strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, with a zero-nonconformance requirement for sample lots. Offerors must comply with the Buy American Act and Berry Amendment, and provide disclosure for any non-domestic materials used. Additionally, the contractor must meet cybersecurity requirements, including CMMC Level 2 and NIST SP 800-171 standards. Invoicing and payment processing must be handled through the Wide Area Workflow system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
16--AXLE,LANDING GEAR
Solicitation # SPE4A5-26-T-419K
Solicitation SPE4A5-26-T-419K is a fixed-price request for quotations issued by the Defense Logistics Agency Aviation for the procurement of landing gear axles under NSN 1620011585930. The requirement consists of two line items totaling 19 units, with 8 units on line 0001 and 11 units on line 0002. All items are to be delivered to DLA Distribution San Joaquin within 150 days after receipt of order, with an original required delivery date of October 21, 2027. The approved source for this procurement is CAGE 78286, and the item is designated as a Navy Identified Critical Safety Item. Quotes must be submitted electronically via the DIBBS system by September 18, 2026. Manufacturers are required to maintain a quality management system compliant with SAE AS9100 or an equivalent standard, and a CMMC Level 2 self-assessment is required. The procurement is subject to the Buy American Act and Berry Amendment. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, and inspection and acceptance will occur at the point of origin. Invoicing must be processed through the Wide Area WorkFlow system. Offers utilizing additive manufacturing are ineligible for award unless approved by the Engineering Support Activity.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333611
New
DIBBS
28--LOCKING LUG ASSEMBL
Solicitation # SPE4A5-26-T-419M
Solicitation SPE4A5-26-T-419M is a Request for Quotations issued by the Department of Defense, specifically the DLA Aviation ASC Supplier Oper OEM Division, for the procurement of 35 Locking Lug Assemblies (NSN 2835011179139). The approved source for this item is 07482 9211M83G25. All quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by September 18, 2026. The procurement falls under NAICS code 333611 and requires compliance with the Buy American Act and the Berry Amendment for quotes exceeding the micro-purchase threshold. The delivery is scheduled for DLA Distribution San Diego with a need ship date of March 1, 2027, and an original required delivery date of September 15, 2027. The delivery period is 163 days, and the terms are FOB Origin, with both inspection and acceptance occurring at the origin. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Payment and invoicing will be processed electronically through the Wide Area WorkFlow (WAWF) system. This solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and prohibitions on the use of additive manufacturing unless specifically authorized.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
15--DUCT ASSEMBLY,HEAT EXC
Solicitation # SPE4A5-26-T-420N
Solicitation SPE4A5-26-T-420N is a fixed-price request for quotations issued by DLA Aviation, ASC Supplier Oper OEM Division, for one heat exchanger duct assembly, NSN 1560002641351. This procurement is an Foreign Military Sales requirement for the RSAF F15SA Conversion Program in Riyadh, Saudi Arabia. The approved source for this item is 76301 68A830637-1007. Quotes must be submitted electronically via DIBBS by September 18, 2026, under NAICS code 336413. The contract requires delivery within five days of award, with an original required delivery date of September 8, 2026. Terms are FOB Origin, and inspection and acceptance will also occur at the origin. Packaging and marking must adhere to MIL-STD-2073-1E, RP001, and MIL-STD-129, with specific requirements for bare item marking per RQ017. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Compliance requirements include CMMC Level 2 Self-Assessment, adherence to the Buy American Act and Berry Amendment, and strict prohibitions against the use of covered telecommunications equipment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the prohibition of hexavalent chromium and restrictions on the acquisition of munitions list items from Chinese military companies. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS