Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SEAL, NONMETALLIC STRIP

Active
SPE7L3-26-T-201QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 103 units of nonmetallic strip seals under NSN 5330-01-366-1066. The contract requires delivery within 164 days after the order is placed and is categorized under NAICS code 339991. Performance is designated for New Cumberland, Pennsylvania, with a response deadline of August 31, 2026. The procurement is subject to strict technical and quality standards, including DLA packaging requirements and the removal of government identification from non-accepted supplies. Environmental restrictions are explicitly stated, prohibiting the intentional addition of mercury or mercury-containing compounds and banning the use of asbestos as defined in FED-STD-313. Specific exceptions for functional mercury are permitted only for approved components such as batteries, sensors, or weapon systems in accordance with NAVSEA standards.

General Info

DoD procurement of 103 nonmetallic strip seals delivered to New Cumberland by August 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-201Q.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUSA
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL,NONMETALLIC STRIP
SEAL, NONMETALLIC STRIP
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
ADEQUATE DATA FOR NSN/Part Number: 5330-01-366-1066 Quantity: 103 EA Purchase Request: 7017913980QTY: 103 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-364G
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 69 O-rings under NSN 5331-01-350-3175. The contract requires delivery within 150 days after receipt of the order and specifies that all items must be free of asbestos. Performance is centered in Tracy, California, with the response deadline set for September 4, 2026. The procurement is subject to several technical and quality requirements, including DLA packaging standards and special oxygen cleaning and packaging in accordance with MIL-STD-1330. Additionally, the contract mandates inspection and acceptance at the origin and incorporates guidelines for configuration change management and the handling of covered defense information.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-U-0625
The Defense Logistics Agency of the Department of Defense has issued solicitation SPE7L1-26-U-0625 for the procurement of 186 gaskets. The required items are identified by NSN/Part Number 5330-00-785-6767 and are associated with purchase request 1000240565. This federal solicitation was posted on August 24, 2026, and requires a response by the deadline of September 8, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7LX-26-U-9284
Solicitation SPE7LX-26-U-9284 is an Indefinite Delivery Contract (IDC) issued by the Department of Defense Strategic Acq Program Directorate for the procurement of plain seals under NSN 5330-01-504-8614. This total small business set-aside under NAICS 339991 has a maximum contract value of 350,000 dollars, with a guaranteed minimum purchase of 304 units and an estimated annual quantity of 2,029 units. The contract is structured as a fixed-price supply agreement with a delivery window of 54 days after receipt of order. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-117 for UV-sensitive materials. Special requirements include compliance with hazard communication standards for hazardous materials, notification requirements for radioactive materials, and the mandatory use of U.S.-flag vessels for sea transportation. All invoicing and receiving reports must be processed through the Wide Area WorkFlow (WAWF) system. Inspection and acceptance will occur at the destination. Proposals are due by August 20, 2026, via the DLA DIBBS portal.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7L3-26-T-203H
This contract is for the procurement of eight plain encased seals, identified by NSN 5330-01-493-7348, under solicitation SPE7L3-26-T-203H. The items must be manufactured according to TDP Rev A Gen 1 and basic drawing 10001 1549650 Revision K. Delivery is required within 102 days, with the destination and acceptance point located at DLA Distribution San Joaquin in Tracy, California. Strict material and quality standards apply, including a total prohibition of asbestos and a general ban on the intentional addition of mercury, except for specific functional exceptions. The seals must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent deterioration from ultraviolet rays. Quality assurance will be conducted using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331, and all marking and packaging must comply with MIL-STD-130N and MIL-STD-129.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC ROUND
Solicitation # SPE7L3-26-T-203R
This contract is for the procurement of 11 nonmetallic round section seals, identified by NSN 5330-01-481-0129 and Woodward HRT Inc part number 84002173-137. The item is designated as a critical application item. Delivery is required within 160 days, with a need ship date of February 12, 2027, and an original required delivery date of May 15, 2027. The shipment is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. The supplier must adhere to specific technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots. Due to the potential for ultraviolet deterioration, the seals must be packaged in medium-duty, waterproof, greaseproof, opaque bags according to MIL-DTL-117. Item Unique Identification is not required for this order.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-01K6
This contract is for the procurement of six O-rings, identified by NSN 5331-01-474-5530 and part number V24509-20-07-18, supplied by BNL Industries Inc. The items are designated as critical application items and must be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The required delivery date is November 12, 2026, with a need ship date of February 16, 2027, and a delivery window of 168 days. The agreement mandates strict adherence to DLA packaging and quality requirements, specifically requiring the items to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent deterioration from ultraviolet rays. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Marking must comply with MIL-STD-129, and inspection and acceptance will take place at the destination.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-203N
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 17 gaskets under National Stock Number 5330-01-605-0828. The contract requires delivery within 136 days after order and specifies that all supplied items must be completely free of asbestos. The items must adhere to strict packaging and marking standards, including MIL-STD-130N for identification and MIL-DTL-117 for waterproof, greaseproof, and opaque packaging to prevent deterioration from ultraviolet rays. Additionally, the contract incorporates specific DLA technical and quality requirements, including guidelines for packaging, the removal of government identification from non-accepted supplies, and the handling of covered defense information.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7L3-26-T-168J
The contract is for the procurement of 39 units of a plain seal, NSN 5330013247020, under solicitation SPE7L3-26-T-168J, issued by the Defense Logistics Agency (DLA) as a total small business set-aside under FAR 19.5. The item, identified by Parker-Hannifin Corporation part number 623-00015-5 and Denison Hydraulics U K part number 623-00015, is classified as a critical application item and must be free of asbestos as defined in FED-STD-313. Delivery is required within 97 days of contract award to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with FOB Origin terms and zero variance permitted in quantity. Inspection and acceptance occur at the destination, and the item must be packaged and sealed in accordance with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag for DVD, FMS, and stock shipments. Marking must follow MIL-STD-129 with no special marking required, and palletization must comply with DLA Packaging Requirements RP001. Preservation methods include preservation method 33, cleaning/drying code 1, and no preservation material. The contract includes numerous FAR and DFARS clauses mandating compliance with cybersecurity standards, including NIST SP 800-171 and safeguarding covered defense information, trafficking in persons prohibitions, employment eligibility verification, sustainable product requirements, hazardous material identification, whistleblower rights, and restrictions on defense telecommunications equipment. Invoicing must be submitted via WAWF, and the contractor must adhere to all socioeconomic representation requirements, including UEI and CAGE code disclosures if providing covered defense telecommunications equipment. The solicitation has no attached attachments, no explicit evaluation factors or award basis, and no pricing data in the CLIN table, though the unit price is listed as $39.00 per unit, totaling $1,521. The contract is open for responses through the DIBBS portal until August 20, 2026, and all technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 339991
New
DIBBS
PAPER, GASKET
Solicitation # SPE7M4-26-T-363U
This contract is a solicitation for the procurement of gasket paper under solicitation number SPE7M4-26-T-363U for the Department of Defense Fluid Handling Division. The requirement is for 122 square yards of material measuring 36 inches wide, 50 yards long, and 0.010 inches thick, identified by NSN 5330-00-270-8467. This is a critical application item that must adhere to ASTM F104-11 Type-I standards and current part standard revisions. The contract specifies a delivery timeline of 160 days after order, with a required delivery date of April 17, 2027, shipped FOB Origin to the DLA Distribution New Cumberland facility. Strict quality and packaging requirements apply, including zero-based sampling plans and the use of waterproof, greaseproof, opaque bags to prevent ultraviolet deterioration. Additionally, the intentional use of mercury or mercury-containing compounds in the hardware or packaging is prohibited.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7M4-26-T-363Q
This solicitation is for the procurement of 11 gaskets under NSN 5330-00-949-9270 for the Department of Defense Fluid Handling Division. The contract requires delivery within 160 days after order and specifies that the items are commercial products defined by military or consensus non-government part standards. All hardware manufactured from the solicitation date forward must adhere to the current revision of the applicable part standard. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and government identification removal protocols. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. Additionally, the item must be free of asbestos as defined in FED-STD-313 and is manually excluded from the First Destination Packaging Program.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-203F
This contract is for the procurement of 202 gaskets under solicitation SPE7L3-26-T-203F for the Department of Defense. The delivery timeline is set for 102 days after the order is placed. The procurement is subject to specific technical and quality requirements, including the submission of a Certificate of Quality Compliance and adherence to sampling methods such as MIL-STD-1916 or ASQ H1331. Strict material restrictions are in place, prohibiting the use of class I ozone depleting chemicals, asbestos, and the intentional addition of mercury. Because the items may deteriorate when exposed to ultraviolet rays, they must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. All supplies must also comply with MIL-STD-130N for identification marking of U.S. military property.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-01W2
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 100 O-rings under National Stock Number 5331-01-195-8882. The contract requires a delivery period of 310 days after receipt of order and strictly prohibits the use of asbestos as defined in FED-STD-313. The agreement incorporates specific DLA technical and quality requirements, including packaging standards and the removal of government identification from non-accepted supplies. Interested parties must respond by September 4, 2026, for this federal acquisition categorized under NAICS code 339991, with performance located in New Cumberland.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 332722
New
DIBBS
BACK-UP RING, PREFOR
Solicitation # SPE7L3-26-T-203E
This contract is for the procurement of 593 preformed back-up rings under solicitation SPE7L3-26-T-203E for the Department of Defense. The items must be manufactured according to the current revision of the applicable part standard, specifically referencing SAE AS8791D and MIL-STD-1330E. Key compliance requirements include a CMMC Level 2 self-assessment, adherence to quality conformance inspection requirements, and a strict prohibition on the use of asbestos, class I ozone-depleting chemicals, and intentionally added mercury. The items must be oxygen cleaned and packaged in accordance with MIL-STD-1330 and MIL-DTL-117 to protect against ultraviolet rays using waterproof, greaseproof, opaque bags. Inspection and acceptance will occur at the origin, with delivery required within 164 days. The final shipment is destined for the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of November 22, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
MODIFICATION KIT, VEHIC
Solicitation # SPE7L3-26-T-201R
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 40 modification kits for vehicular equipment under NSN 2590-01-612-2977. The contract is set aside for Women-Owned Small Businesses and falls under NAICS code 333310. Delivery is required within 164 days after receipt of the order, with the place of performance located in Texarkana, Texas. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with these kits is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification and complete specific DLA training and questionnaires.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333613
New
DIBBS
UNIVERSAL JOINT, VEH
Solicitation # SPE7L3-26-T-202Y
This contract is a solicitation for the procurement of vehicle universal joints under NSN 252012338805. The requirement is split into two line items: CLIN 0001 for 5 units to be delivered to DLA Distribution Albany, Georgia, and CLIN 0002 for 53 units to be delivered to DLA Distribution Barstow, California. The total quantity requested is 58 units, with a required delivery date of February 28, 2027, and a need ship date of February 16, 2027. The agreement specifies FOB Origin shipping with inspection and acceptance occurring at the destination. Compliance with DLA Master List technical and quality requirements is mandatory, specifically regarding packaging, marking, and the handling of hazardous materials. The solicitation is designated as a Total Small Business Set-Aside under NAICS code 333613 and is managed by the Department of Defense Land Supplier Operations Vehicle Support.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
CONNECTING LINK, RIGID
Solicitation # SPE7L3-26-T-201G
This solicitation is for the procurement of 31 rigid connecting links, identified by NSN 3040-01-386-3462, with a specific tan color requirement per AMS-STD-595. The items must be produced using a metal casting process, which necessitates the use of specialized tooling. Delivery is required within 168 days after the order is placed. Compliance requirements include CMMC Level 2 certification and adherence to DLA packaging and quality standards. Due to the nature of the technical data, this contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training. The solicitation was posted by the Department of Defense Land Supplier Operations Vehicle Support with a response deadline of August 31, 2026.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333310
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L3-26-T-201S
This contract is for the procurement of 10 mounting plates, identified by NSN 2590-01-652-0818, under solicitation SPE7L3-26-T-201S. The items must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania with a required delivery date of September 14, 2026. The contract specifies a delivery timeframe of 51 days after order and requires FOB Origin shipping with inspection and acceptance occurring at the destination. Technical compliance is governed by specific drawings and quality assurance provisions, including the DLA Master List of Technical and Quality Requirements and the use of Qualified Products Lists or Qualified Manufacturers Lists. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Additionally, the contract strictly prohibits the use of Class I ozone-depleting chemicals and mandates sampling methods in accordance with MIL-STD-1916 or ASQ H1331.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336330
New
DIBBS
ADJUSTER, SLACK, TRACK
Solicitation # SPE7L3-26-T-203J
This solicitation, numbered SPE7L3-26-T-203J, is issued by the Department of Defense Land Supplier Operations Vehicle Support for the procurement of 51 units of a track slack adjuster, identified by NSN 2530-01-672-4501. The contract is set aside for Women-Owned Small Businesses and requires delivery within 164 days after order. Performance is centered in Texarkana, Texas, with a response deadline of September 4, 2026. The agreement mandates strict adherence to DLA packaging, quality, and technical requirements, including the use of qualified products lists and specific sampling methods such as MIL-STD-1916 or ASQ H1331. Key compliance measures include a prohibition on Class I ozone-depleting chemicals and the requirement for CMMC Level 2 certification. Additionally, the contract contains sensitive technical data subject to ITAR and EAR export controls, restricting distribution to authorized contractors with approved JCP certification and completed export-control training.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
DOOR, HATCH, VEHICLE
Solicitation # SPE7L3-26-T-170K
The solicitation seeks nine units of a vehicle door and hatch specified by NSN 2510-00-229-4197 under solicitation number SPE7L3-26-T-170K, with a response deadline of August 20, 2026, and a mandatory five-day delivery timeline following award. The item is subject to stringent export control regulations under ITAR and EAR, requiring strict compliance with DFARS 252.225-7048, and access to associated technical data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program status, have completed mandatory export control training, and received explicit DLA approval. All units must conform to Army drawings, including the NR 19207 series and DCSC Drawing 16236 CS-2300-0001, and adhere to MIL-STD-2073-1E packaging standards with special packaging instruction SPI AK02294197 Revision D governing preservation and marking. Labeling and barcoding must comply with MIL-STD-129, including compliance with 29 CFR 1910.1200 for hazardous materials and specific radioactive material labeling requirements, while special marking code ZZ indicates additional contract-defined identifiers. Inspection is required at origin under FAR 52.246-2, with acceptance authority resting with the government using zero-defect sampling criteria per MIL-STD-1916 or ASQ Z1.4 and a requirement for an ISO 9001:2015 certified quality system. Delivery is FOB origin with the final destination being the Government of Israel, Ministry of Defense in Mazlach, Israel, and payment must be processed electronically through Wide Area Workflow with an approved invoice type matched to the contract line item. The contract incorporates numerous FAR and DFARS clauses addressing labor, cybersecurity, trafficking, hazardous materials, child labor, subcontracting, information safeguarding, and cybersecurity maturity model certification Level 2. The solicitation mandates compliance with cybersecurity requirements under 252.204-7012 and NIST SP 800-171 assessments, prohibition on hexavalent chromium and toxic materials, and restrictions on procurement from Communist Chinese military companies. Pricing information is not provided in the solicitation, with the contract type unspecified, and offerors must submit through DIB
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details