Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SEAL RING

Active
SPE4A6-26-T-09WUFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a SEAL RING with NSN 2825-01-062-9302, requiring a quantity of two units under solicitation SPE4A6-26-T-09WU, with a response deadline of August 4, 2026, and delivery due 165 days after award. This is a total small business set-aside under NAICS code 333611, administered by the Department of Defense’s ASC Commodities Division, with performance centered in New Cumberland, Pennsylvania. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. Packaging, inspection at origin, and removal of government identification from non-accepted items are governed by specific referenced requirements. Item Unique Identification is waived per the Service customer’s request, in accordance with DFARS 252.211-7003(c)(1)(i). Mercury and mercury-containing compounds are strictly prohibited in contact with the supplied hardware except for designated functional uses such as batteries, fluorescent lights, sensors, weapon systems, and approved chemical reagents specified by NAVSEA; portable mercury-containing devices must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. Physical identification and bare item marking must meet specified criteria, and all measuring and test equipment used in production or inspection must comply with applicable standards. The point of contact for inquiries is Stephanie Cruz, reachable via email and phone provided.

General Info

Procure two SEAL RINGS, NSN 2825-01-062-9302, small business set-aside, delivery in 165 days, mercury restrictions apply.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

333611 - Turbine and Turbine Generator Set Units ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

SPE4A6-26-T-09WU.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Stephanie Cruz
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL RING
SEAL RING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
ADEQUATE DATA FOR THE NSN/Part Number: 2825-01-062-9302 Quantity: 2 AY Purchase Request: 7017572595QTY: 2 Delivery: 165 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333611
New
DIBBS
Thermal Insulation Blanket ManufacturingThe contract entails the manufacture of 62 thermal insulation blankets designed to meet stringent military and industry standards, incorporating aluminum foil, corrosion-resistant steel sheet, and heat-resistant silica as primary materials. These blankets must fully comply with MIL-STD and ASTM specifications to ensure performance under extreme thermal and environmental conditions, typical of defense and aerospace applications. The work is being procured as a subcontract under the Defense Logistics Agency, which operates under the Department of Defense, indicating the critical nature of the end use and the high degree of quality control expected. The solicitation was posted on July 27, 2026, with a response deadline of August 7, 2026, allowing potential suppliers a limited window to submit proposals. The NAICS code 333611 identifies this as a contract within the heating equipment manufacturing sector, specifically pointing to the production of industrial and commercial heating equipment components. Although detailed point of contact and performance location information is not provided, the requirement is clearly directed toward suppliers capable of delivering precision-engineered thermal insulation products to federal defense standards, with no set-aside provisions indicated, meaning it is open to all qualified vendors.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
DIBBS
PARTS KIT, COOLING TThe contract pertains to the procurement of a Parts Kit for a Cooling Turbine identified by NSN 1660-01-161-9773, with a quantity of 134 units to be delivered within 300 days after contract award. Manufacturing may require casting or forging processes, and the government does not necessarily possess the associated special tooling, necessitating potential assistance requests through DLA’s Casting and Forging Assistance portal. The item is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with compliance enforced through multiple contract clauses including tailored higher-level quality standards, inspection and acceptance at origin, and strict adherence to DLA packaging guidelines. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero nonconformances required unless otherwise specified, and attributes are categorized with defined verification levels or AQLs. The contract mandates CMMC Level 2 certification for third-party assessors, physical identification marking of items, and compliance with measures for covered defense information. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals employed by U.S. entities or subsidiaries, regardless of location. DFARS 252.225-7048 applies, and DLA restricts access to contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have received official approval from DLA to access controlled information. The solicitation is a total small business set-aside under NAICS code 333611, issued on July 27, 2026, with responses due by August 7, 2026. The contracting activity is under the Department of Defense, specifically the ASC Supplier Oper AE and AF Division, with Shenita Tirado listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
DIBBS
VANE ASSY, COMPR 9THThe contract is for the procurement of a Vane Assembly, Compressor 9th, identified by part number 6876109 and NSN 2835-00-555-7731, with a quantity of two units to be delivered FOB origin within five days of contract award to the General Depot of Naval Supplies in Kaohsiung, Taiwan. The item is designated as a critical application item by Rolls-Royce Corporation and requires strict compliance with technical and quality requirements listed in the DLA Master List, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Item Unique Identification is not required per the customer’s request and DFARS 252.211-7003(c)(1)(i). Packaging must meet DLA-specific standards with preservation method 10 (cooling/drying), no preservation material, and container codes E5 for both unit and intermediate containers. Marking must exclude special codes and comply with military standards without the need for hazardous or radioactive labels beyond standard compliance. Sampling for acceptance must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0, respectively. Mercury and mercury-containing compounds are strictly prohibited except in functional components such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The contract incorporates multiple FAR and DFARS clauses, including cybersecurity requirements under 252.204-7012 and compliance with NIST SP 800-171 via deviation 2026-O0025, CMMC Level 2 self-assessment, and safeguarding of covered defense information. It also enforces compliance with prohibitions on hexavalent chromium, toxic materials, and acquisition of equipment from Communist Chinese military companies, along with sustainable product and employment eligibility verification requirements. Payment must be submitted via WAWF, with invoice processing governed by wide-area workflow instructions and no unauthorized obligations binding the government.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 333611
New
DIBBS
INSULATION BLANKET,The contract is for the procurement of 62 thermal insulation blankets, designated by part number 11636406 and NSN 5640-01-083-5423, manufactured from aluminum foil, corrosion-resistant steel sheet, and silica, with a heat-resistant layer thickness between 0.008 and 0.012 inches, intended for use by the U.S. Army Tank Automotive Command. Delivery is required within 20 days after order placement, with the final destination being Busan, Korea, under FOB Destination terms, meaning the contractor assumes all risk until delivery. The estimated contract value is $7,316, based on historical unit pricing, though the solicitation does not explicitly state the unit price. Packaging must adhere to MIL-STD-2073-1E, with specific instructions to use Box EC in Bag BL in Box ED as directed by RD005, and marking and barcoding must follow MIL-STD-129, with no special marking required. Preservation method 32 is mandated, involving cleaning and drying without protective materials. The item is subject to stringent cybersecurity compliance requiring CMMC Level 2 certification for the supplier’s third-party assessment organization, along with multiple DFARS and FAR clauses governing safeguarding covered defense information, cyber incident reporting, prohibition of covered telecommunications equipment, whistleblower rights, trafficking in persons, employment eligibility, and hazardous material handling, including compliance with OSHA’s Hazard Communication Standard and mandatory submission of Safety Data Sheets prior to award. The contractor must also notify the government of any radioactive materials exceeding specified activity thresholds and ensure all labeling meets federal regulations. Invoicing is exclusively required through the Wide Area WorkFlow system, and no alternate payment methods are permitted. Offerors must disclose their Unique Entity ID and CAGE code, and represent their small business status including any applicable socioeconomic designations. The solicitation, issued by the Defense Logistics Agency under number SPE8E6-26-T-3873, was posted on July 27, 2026, with responses due by August 7, 2026, and must be submitted electronically via the DIBBS portal, with no physical submissions accepted. Evaluation factors and the specific basis of award are not detailed in the available documentation, though the nature of the requirement suggests a potential Low Price Technically Acceptable approach. All compliance obligations are non-negotiable, and failure to meet any clause
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
DIBBS
VALVE, GOVERNORThe contract pertains to the procurement of one valve governor with NSN 2825-01-219-9251, supplied by Curtiss-Wright Electro-Mechanical Corp under part number 916692, designated as a critical application item. The item must be delivered within 164 days to the distribution depot in Bremerton, WA, with delivery terms set as FOB origin and no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 without special codes, and palletization follows DLA packaging standards. The product is subject to strict environmental restrictions: ozone-depleting chemicals are entirely prohibited, and mercury or mercury-containing compounds may not be intentionally introduced except under specific exempted uses such as in certain batteries, instruments, or weapon systems as defined by NAVSEA, with additional containment requirements for portable devices. Cybersecurity requirements mandate CMMC Level 2 self-assessment compliance, and all technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by solicitation or award dates. The contract is issued under solicitation SPE7L5-26-T-4643, with a response deadline in August 2026 and an original delivery requirement of July 2027. Transportation and shipping details are governed by DLA procedural notes, and all items must meet the DoD’s authorized unit of issue standards. Primary point of contact is Randy Ith, reachable via DLA.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
Federal
Generator Equipment Supply (130 kW Unit)A 130 kW emergency generator, either new or certified used, is being procured for delivery to the Waco site with all necessary components including the fuel system, enclosure, and mounting skid. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond, and it is classified under NAICS code 333611 for generators and generator sets. The solicitation was posted on July 27, 2026, with responses due by August 27, 2026, at 2:00 PM. The place of performance is specifically identified as Waco, Texas, with a zip code of 76708. The procuring agency is the Department of the Interior, under the MWRA Midwest Region, and the contract is accessible through the SAM.gov platform for further details.
Mwr Midwest REGION(60000)

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 333611
New
Federal
Supply of Tier 4 Final Compliant Diesel Engines
FA9101 Aedc Pkp Procrmnt Branch

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 333611
New
Federal
Airboat Propulsion and Engine Integration
Sat Team 2 Fws

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
Federal
BEARING ASSEMBLY,TUThis contract pertains to the repair of the BEARING ASSEMBLY,TU under a fixed-price arrangement with strict compliance requirements for quality, inspection, and documentation. The work must adhere to the contractor’s approved repair standards, technical orders, and manufacturer specifications, with all repairs requiring exact alignment to the specified CAGE code 90099 and reference number 1387F17G01. Item marking must follow MIL-STD-130 Rev N, and any changes to design, materials, or part numbers require prior written approval from the NAVICP-MECH Contracting Officer, categorized under one of six code types detailing the nature of the substitution. The contractor is fully responsible for all inspection and testing procedures, ensuring compliance with both government standards and original manufacturer requirements, and must maintain complete inspection records for 365 days after final delivery. The contract mandates adherence to Buy American and Free Trade Agreements, with applicable certification requirements, and includes a total small business set-aside with restrictions on pass-through charges. A one-year warranty covers supplies after delivery, with defects must be reported within 45 days of discovery. Packaging must conform to MIL-STD-2073, and all technical documents referenced must be obtained through authorized DOD channels, with specific procedures for restricted or classified materials. The solicitation is limited to authorized distributors of the original manufacturer, who must provide proof of authorization. The North American Industry Classification System code is 333611, with a small business size standard of 1,500 employees, and the contract was posted on July 27, 2026, with a response deadline of August 24, 2026. All communication and submissions must be directed to the designated point of contact at the Naval Supply Systems Command in Mechanicsburg, Pennsylvania.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 333611
New
DIBBS
VALVE, PILOT GOVERNORThe contract is for a single unit of a valve, pilot governor, specifically designated for use in an E/I steam turbine with the NSN 2825-01-214-9012 and part number 916395, supplied by either Siemens Government Technologies or Curtiss-Wright Electro-Mechanical Corp. The item is classified as a critical application and a Navy field level reparable, requiring strict configuration control in accordance with MIL-STD-973. All materials must comply with strict prohibitions against Class I ozone-depleting chemicals, which override any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly authorized. Packaging must meet MIL-STD-2073-1E standards with specific preservation methods, wrapping materials, and unit container codes, while labeling follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and delivery is to be made FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must be delivered within 165 days of contract award, with a required ship date of January 19, 2027, and an original delivery deadline of January 1, 2029. The procurement is governed by DLA technical and quality requirements referenced via R and I numbers from the DLA Master List, with the applicable revision determined by the solicitation or award date. The solicitation number is SPE7L5-26-T-4627, issued under NAICS code 333611 by the Department of Defense, with a single unit purchased at a specified unit price and no variance permitted in quantity.
LAND SUPPLIER OPNS ENGINES

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333611
New
DIBBS
SHROUD SEGMENT, TURBThe contract pertains to the procurement of 11 shroud segments for use in a turbine system, identified by NSN 2840-01-689-4848 and part number 5200T09G08, under solicitation SPE4A5-26-T-309M. Delivery is required within five days of award, with all items to be delivered FOB origin and subject to zero variance in quantity. Inspection and acceptance occur at the point of origin, and all packaging must adhere to MIL-STD-2073-1E with specific methods defined for preservation, wrapping, and containment, while marking complies with MIL-STD-129 and includes no special marking code. The item is classified as a critical application item and is subject to stringent quality and configuration control requirements through standardized military specifications and tailored higher-level quality provisions, including compliance with MIL-STD-1916 or equivalent zero-based sampling plans for verification, with critical attributes assigned the strictest acceptance criteria. The supplier must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including documentation standards for Source Approval Requests, configuration change management via Engineering Change Proposals, and the mandatory removal of government identification from non-accepted supplies. Packaging and shipping must follow DLA procurement guidelines, with freight routed to a designated facility at Cherry Point, North Carolina, and prohibited from using parcel post. The supplier is required to ship via the fastest traceable means, and the contract includes specific logistics identifiers, including a point of contact, delivery deadline of July 20, 2026, and associated program and project codes. All contractual obligations are governed by active DoD acquisition policies, and the unit of issue is defined by standardized ANSI X12 formatting as referenced by official DLA resources.
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 333611
New
DIBBS
RING, PISTONThe contract pertains to the procurement of four CRIMPED EXPANDER RING PISTON RINGS with NSN 2825-01-325-6804 under solicitation SPE7L1-26-T-7858, issued by the Department of Defense through the Land Supply Chain. Delivery is required within 20 days of award, and the purchase request number is 7014948238. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Government identification must be removed from non-accepted supplies in accordance with RQ011. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026, and performance is to occur at FPO, ZIP 09564. Point of contact is Kristina Derry, reachable via email and phone provided, and details are accessible through the DIBBS portal.
LAND SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in about 14 hours
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541330
New
DIBBS
Counterfeit Electronic Parts Detection System ImplementationThe contract seeks the development and maintenance of a detection and avoidance system designed to identify and prevent the infiltration of counterfeit electronic components within the RF assembly supply chain. This effort is critical to ensuring the integrity and reliability of defense-related electronic systems by implementing advanced technologies that can authenticate components at various stages of procurement and assembly. The system must support real-time detection capabilities, integrate with existing supply chain workflows, and provide auditable logs to meet stringent defense standards for component traceability and provenance. The contractor will be responsible for ongoing system updates, calibration, and support to adapt to evolving counterfeit methods and emerging component technologies. This is a small business total set-aside subcontract under NAICS code 541330, indicating it is reserved exclusively for small business concerns as defined by the SBA. The solicitation was posted on July 28, 2026, with responses due by August 7, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While the place of performance and point of contact details are not specified, the work is expected to support defense supply chain operations, with performance likely requiring collaboration with government stakeholders and adherence to federal acquisition regulations. The emphasis is on innovation, rapid deployment, and sustainable maintenance to ensure long-term resilience against counterfeit threats in high-stakes RF applications.
Engineering Services

POSTED

about 10 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight LogisticsThe contract requires the transportation of RF cable assemblies to locations within the contiguous United States, with strict compliance for international shipments using U.S.-flag vessels as mandated by federal regulations. It is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified under the Small Business Administration guidelines are eligible to bid. The North American Industry Classification System code 484220 applies, indicating the scope centers on truck transportation for local and long-distance freight services, though international legs require vessel transport under U.S. registry. The contracting agency is the ASC Commodities Division within the Department of Defense, and the solicitation is open for responses until August 7, 2026, with a posting date of July 28, 2026. Performance locations span both domestic and international destinations, necessitating logistics providers to具备 the capability to navigate complex regulatory environments including maritime laws and defense logistics protocols.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 10 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541618
New
DIBBS
Export-Controlled Technical Data ManagementThis contract mandates the secure management and controlled distribution of technical data subject to the International Traffic in Arms Regulations and the Export Administration Regulations, requiring strict adherence to U.S. and Canadian Joint Certification Program standards to ensure compliance with bilateral export control requirements. All handling, storage, transmission, and access to regulated information must be executed through validated security protocols, approved facilities, and authorized personnel with appropriate clearances and training, ensuring no unauthorized disclosure or transfer occurs under any circumstances. The contract is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the Small Business Administration, and is classified under NAICS code 541618 for other scientific and technical consulting services. It is issued by the ASC Commodities Division within the Department of Defense, with responses due by August 7, 2026, and is accessible via the DIBBS platform. Performance is expected to meet all federal export control obligations regardless of geographic location, with no specific place of performance identified, implying flexibility but with full accountability for compliance across all operational environments.
Other Management Consulting Services

POSTED

about 10 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Defense-Grade Packaging and Marking ServicesThe contract entails the packaging and marking of RF cable assemblies in strict compliance with Defense Logistics Agency standards, ensuring full adherence to military-grade requirements for handling sensitive defense components. This includes implementing shock protection measures to safeguard assemblies during transit, applying government property labels as mandated, and securing the contents within tamper-resistant, containment-compliant packaging to maintain integrity and accountability throughout the supply chain. All work must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, with the North American Industry Classification System code 493190 designating the scope to warehousing and storage services specifically tailored for defense logistics. The contract is managed by the ASC Commodities Division under the Department of Defense, with proposals required to be submitted by August 7, 2026, following a July 28, 2026 posting date. The work is expected to be performed without a specified geographic location, and interested parties must respond through the official DIBBS portal referenced in the solicitation.
Other Warehousing and Storage

POSTED

about 10 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
RF Cable Assembly Manufacturing and TestingThe contract awards the manufacture and testing of 100 RF cable assemblies annually under strict military standards, requiring full lifecycle configuration control and comprehensive quality assurance processes to ensure consistent performance and traceability. All work must comply with applicable defense regulations and be performed with rigorous documentation to maintain integrity across production, testing, and delivery phases. The solicitation is set aside exclusively for small businesses as defined by the SBA, aligning with FAR 19.5, and falls under NAICS code 334417 for communications equipment manufacturing. The contract is issued by the ASC Commodities Division under the Department of Defense, with a response deadline of August 7, 2026, and was posted on July 28, 2026. Performance location details are not specified, and no point of contact is listed in the release. Subcontractors seeking to respond must demonstrate capability in high-reliability RF assembly, adherence to military specifications, and the ability to sustain quality control throughout the product’s lifecycle. All bids must be submitted through the designated DIBBS portal prior to the deadline.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and SPRS Compliance SupportThis contract supports independent quality inspection, sampling, and SPRS compliance activities to ensure adherence to military standards and satisfy prime contractor evaluation criteria. The work is designated as a total small business set-aside under SBA guidelines, meaning only small businesses are eligible to bid, and it falls under NAICS code 541330 for engineering services. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, and is issued under the ASC Commodities Division of the Department of Defense. Performance location details are not specified, but the work is intended to support DOD procurement quality assurance objectives. The contract is structured as a subcontract, indicating it will be part of a larger prime contract ecosystem focused on supply chain compliance and inspection validation.
Engineering Services

POSTED

about 10 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Domestic Freight HaulingThe contract is for the transportation of finished wiring harnesses from the manufacturer to various domestic military stock locations across the contiguous United States under FOB Origin terms, meaning the buyer assumes all transportation costs and risks once the goods leave the seller’s facility. This is a small business set-aside subcontract classified under NAICS code 484220, which pertains to heavy and tractor-trailer truck transportation, ensuring eligibility is restricted to small businesses as defined by the SBA. The work is being procured by the ASC Commodities Division of the Department of Defense, and the solicitation is open for responses through August 7, 2026, with the opportunity posted publicly on the DIBBS platform. Performance will occur across multiple CONUS locations, requiring a carrier with the capacity to handle frequent, reliable shipments to geographically dispersed military stocking points.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 10 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Preservation ServicesThe contract mandates the delivery of military-compliant packaging, preservation, and labeling services for finished wiring harnesses intended for extended storage and transport under demanding operational conditions. All work must adhere to strict defense standards ensuring the integrity, durability, and readiness of the assemblies, with specific requirements for corrosion inhibition, environmental protection, and secure containment to withstand extreme temperatures, humidity, and mechanical stress during military logistics cycles. The packaging and labeling must fully comply with applicable military specifications, including clear identification of part numbers, lot codes, handling instructions, and shelf life information to support traceability and field readiness. This is a total small business set-aside under the SBA program, restricted exclusively to businesses certified as small under NAICS code 493190, which covers warehousing and storage services. The opportunity is structured as a subcontract and is administered by the ASC Commodities Division under the Department of Defense. Bids must be submitted by the deadline of August 7, 2026, with no solicitation number provided. Performance location details are unspecified, but services are expected to support DoD supply chain requirements, with all work centered on ensuring long-term survivability and operational preparedness of wiring harnesses in austere environments.
Other Warehousing and Storage

POSTED

about 10 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335712
New
DIBBS
Cable and Wire Supply for Harness AssemblyThe contract solicits the supply of certified, traceable military-specification cables, wires, connectors, and insulation materials specifically for the production of wiring harnesses, ensuring strict compliance with defense-grade standards for reliability and performance. All materials must be fully traceable through documented lot numbers and quality control records to meet rigorous military requirements. The opportunity is structured as a subcontract under a Total Small Business Set-Aside, designated by the SBA, meaning only small businesses are eligible to compete, aligning with FAR 19.5 regulations. The NAICS code 335712 classifies this as a wiring and wiring device manufacturing contract, indicating the focus on specialized electrical components rather than general cable production. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, providing a ten-day window for submissions. The contracting activity is the ASC Commodities Division within the Department of Defense, and all performance is expected to adhere to federal defense supply chain protocols, though specific performance locations are not detailed. The procurement is accessible through the DIBBS platform, and bidders must ensure full compliance with military specifications, documentation requirements, and small business certification to qualify. No point of contact information is provided within the posting, suggesting all communication and submission must be handled through the designated federal procurement portal.

POSTED

about 10 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
DIBBS
Wiring Harness ManufacturingThe contract mandates the manufacture, testing, and delivery of fifty military-grade wiring harnesses designated by NSN 6150-01-119-4113, with strict adherence to established design specifications, material traceability, packaging protocols, and inspection requirements to ensure full compliance with defense standards. All units must meet rigorous quality and performance benchmarks expected for military applications, with documentation and certification required at every stage of production to guarantee accountability and readiness for field deployment. This is a subcontract opportunity classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the NAICS code 335931, which corresponds to other electrical equipment and component manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, and is issued by the ASC Commodities Division under the Department of Defense. While specific performance location and point of contact details are not provided, the work is expected to align with defense logistics requirements, and all bids must be submitted through the designated DIBBS portal prior to the deadline.
Current-Carrying Wiring Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 10 days
View Details
NAICS: 999999
New
DIBBS
Service UnavailableThe contract posting is currently unavailable due to system issues, preventing access to detailed prime contract information and related subcontract opportunities. The solicitation, identified under the number SPE4A626RXB88, was posted on July 28, 2026, with a response deadline of August 14, 2026, and is categorized as a subcontract under the Department of Defense’s ASC Commodities Division. The NAICS code 999999 indicates an undefined or placeholder classification, and no set-aside type, organizational details, or point of contact information has been provided. The place of performance and office address fields are unspecified, and no further administrative or operational details are accessible at this time. The official record can be viewed through the provided DIBBS link, though the system is currently unable to retrieve the underlying contract data.

POSTED

about 10 hours ago

DEADLINE

in 17 days
View Details
NAICS: 541512
New
DIBBS
CMMC Level 2 Compliance & Cybersecurity SupportThe contract seeks ongoing cybersecurity compliance support to achieve and maintain CMMC Level 2 certification, focusing on system hardening, audit readiness, and full alignment with NIST SP 800-171 standards. The work involves implementing and managing technical and procedural controls to ensure continuous adherence to federal cybersecurity requirements, with an emphasis on preparing for third-party assessments and sustaining compliance over time. The contractor will be responsible for identifying gaps in current security postures, applying remediation measures, and documenting all control implementations to meet CMMC criteria. This is a subcontract under the Department of Defense’s ASC Commodities Division, classified under NAICS code 541512 for computer systems design services. The opportunity was posted on July 28, 2026, with responses due by August 7, 2026. While no specific location is designated for performance, the work is expected to be conducted remotely or at the contractor’s facility, supporting the DoD’s broader objective of securing its supply chain. The subcontract nature indicates the selected entity will provide services to a prime contractor or another subcontractor involved in DoD contractual obligations.
Computer Systems Design Services

POSTED

about 10 hours ago

DEADLINE

in 10 days
View Details