SEALING COMPOUND

SEALING COMPOUND
SEALING COMPOUND
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
The AMSC was changed to C. At the time of the update the Material Master was critical and/or weapons code. Do not change the AMSC to A or H.
AMSC was change to Z as the material was coded a commercial-off-the-shelf in the Material Master at the time of this update. Do not change the AMSC to A or H. Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
SPE8ES-27-T-0325
SECTION B
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
U/I = KT
SIZE: 1.000 GALLONS KIT.
(Note: A MINIMUM OF 96 FL OZ OF BASE COMPOUND IN A GALLON-SIZE CONTAINER AND THE REQUIRED AMOUNTS OF CURING AGENT AND PRIMER, IF REQUIRED, IN SEPARATE CONTAINERS.)
IN ACCORDANCE WITH MILITARY SPECIFICATION MIL-PRF-8516G
TYPE II: HIGH VISCOSITY, 401-1200 POISES INITIAL MIXED VISCOSITY
CLASS 1: 24 HR CURE AT 77 DEG. F
CATEGORY A TWO-COMPONENT KIT
RS054: Shelf life requirement RS001 for a TYPE 2 (CODE 3) item with a shelf life of 9 month (extendable) applies to this item.
ADDITIONAL REQUIREMENTS:,,
1. MIL-STD-129 label will also include lot or batch number,,
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL) REQUIREMENTS. . THE MANUFACTURER FOR THE QPL ITEM MUST BE QPL APPROVED AT THE TIME OF THE CONTRACT AWARD.
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-8516G(1) NOT 1 REVISION NR G DTD 07/24/2019 PART PIECE NUMBER: P/N M8516-2-1-A-1
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-147F NOT 1 REVISION NR F DTD 09/05/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-313F REVISION NR F DTD 10/12/2018 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK QPL-8516-25 NOT 1 REVISION NR 25 DTD 01/07/2008 PART PIECE NUMBER:
SPE8ES-27-T-0325
SECTION B
PR: 7019094862 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019094862 0001 KT 1.000
NSN/MATERIAL:8030008237953
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:001
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
================================================= NOTE: TOS (TYPE OF STORAGE) = D STORAGE AT ROOM TEMPERATURE (60 to 80 degree F) ================================================= The base material shall be furnished in compound lined, double-seamed end cans with multiple friction closure of the type normally used for this product. The curing agent and primer shall be furnished in resealable, resin-lined cans, glass, or plastic containers. There shall be no interaction chemically or physically with the contents which would damage the container or alter the strength, quality, or purity of the contents. The containers shall not spill or leak during shipment, handling, storage, and redistribution. Each kit assembly shall be further secured in a heat-sealed, aluminized Mylar film overpack enclosure suitable to stop atmospheric exchanges of volatiles, moisture, and oxygen. The overpack film shall be protected from casual puncture by further packaging within a close-fitting, corrugated fiberboard box or other functionally equal packaging method.
1-4 gallon kit (total kit volume from 128-512 fl.oz). MIL STD 129 labels required on each box. All contents making up one kit (unit pack) will be placed in a D3 box (4G box if hazardous) and braced with proper dunnage to prevent damage and movement, Itemized list of contents required.
*EACH KIT MUST HAVE A MIL-STD-129 LABEL
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
SPE8ES-27-T-0325
SECTION B
PR: 7019094862 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
N62507
US NAVAL AIR FACILITY ATSUGI
FISCY ATSUGI MATERIAL DIV
PSC 477 BOX 4
FPO AP 96306-1204
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
N62507
U.S. NAVAL AIR FACILITY ATSUGI
FISCY ATSUGI, MATERIAL DIV
BLDG 934 OOHGAMI AYASE-SHI
KANAGAWA KEN 252 1101
JP
M/F: (TCN) N625076310DA5B
RDD: 777
PROJ: ZH3 TP 2
SUPP ADD: N50527 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A41 DIST: 9B ADV: FC: JE
Need Ship Date:00/00/0000 Original Required Delivery Date:11/13/2026
SPE8ES-27-T-0325 NSN/Part Number: 8030-00-823-7953 Quantity: 1 KT Purchase Request: 7019094862QTY: 1 Delivery: 20 days ADO