Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, June 24 at 2:00 PM EDT

Register Free →

Seat Comfort Study on A/MH-6M Fleet

Active
H92241-09-P-0063Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense's Technology Applications Contracting Office (TAKO) seeks a Crew Seat Comfort Study focusing on the A/MH-6M helicopter fleet. This study aims to evaluate and quantify various factors affecting crew seat comfort and mission suitability across the existing seat configurations. Key to the study is consideration of a wide anthropometric range, from small adults (around the 5th percentile adult female) to large adults (approximately 95th percentile adult male), ensuring comprehensive assessment for all potential users. The contract is planned for award on a sole source basis to Oregon Aero, Inc., located in Scappoose, Oregon, under the justification that they are the only responsible source capable of fulfilling the agency's requirements. The solicitation, identified as H92241-09-P-0063, was posted in August 2009 and falls under NAICS code 336413, which pertains to aerospace product and parts manufacturing. The place of performance is Fort Eustis, Virginia, and key contract contacts include Contract Specialist Linda D. Whitlock and Contracting Officer Terri L. Tew, providing points of communication for interested parties.

General Info

DoD awards sole-source contract to Oregon Aero for A/MH-6M crew seat comfort study.

Agency

Department of Defense → Amsam-spkView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing View NAICS

Place of Performance

Technology Applications Program Office (TAPO) 401 Lee Blvd. Fort Eustis, Va 23604, FORT EUSTIS, VA, 23604, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment of Defense → Amsam-spk
Contacts2 people available
OfficeFORT EUSTIS, VA, 23604-5577, USA
Organization / Agency
Department of Defense → Amsam-spk
View Agency Profile
Office AddressFORT EUSTIS, VA, 23604-5577, USA
Contacts
Linda D. WhitlockContract Specialist
Terri L. TewContracting Officer

Full Description

Show more
The Technology Applications Contracting Office (TAKO) has a requirement for a Crew Seat Comfort Study on the A/MH-6M Fleet. This Crew Seat Study will measure and quantify factors impacting comfort and mission suitability in the existing A/MH06M crew seat configurations. The study shall consider anthropometry range of small, approximately 5th percentil adult female, to large, approximately 95th percentile adult male subjects. The Government intends to award on a sole source basis in accordance with FAR 6.302-1, Only One Responsible Source and No other Supplies or services will satify Agency Requirements, to Oregon Aero, Inc., 34020 Skyway Drive, Scappoose, Oregon 97056. Contact information is Linda D. Whitlock, Contract Specialist, email linda.whitlock@us.army.mil, or 757-878-3299 ext 361.

Similar Contracts

NAICS: 336413
New
Canada
Small Fixed-wing VTOL Drone Bundles (min. 3)The National Research Council of Canada is seeking to acquire a minimum of three fixed-wing, vertical take-off and landing (VTOL) unmanned aerial systems to serve as advanced research and development platforms for autonomy, flight control algorithms, and custom payload integration. These systems must meet strict technical specifications including all-electric propulsion, a quad-plane configuration with four vertical motors and one pusher/puller motor, a maximum wingspan of five meters, a maximum takeoff weight of fifty kilograms, and a minimum payload capacity of 2.5 kilograms under standard atmospheric conditions at sea level. Each system must provide at least one hour of flight endurance at a minimum cruise speed of 15 meters per second while carrying the full payload, including a minimum of ten minutes of hovering time, and must be fully compatible with open-source autopilot software such as PX4 and ArduPilot, as well as open-source ground stations like QGroundControl and communication protocols including MAVLink. All offerings must be submitted as fixed unit prices in Canadian currency, with customs duties excluded and applicable taxes added separately. The solicitation is subject to the Policy on Reciprocal Procurement, allowing only Canadian suppliers and suppliers from applicable trading partners to bid. Bidders must comply with mandatory technical criteria across eleven pass/fail requirements; failure to meet any single criterion will render the offer non-compliant and ineligible for award. The contract will be awarded to the lowest-priced compliant offer. Deliverables are required to be received no later than September 30, 2026, and must be shipped to the designated delivery point at 9800 rue Irénée-Vachon, Mirabel, Québec, under Incoterms® 2020 DAP terms. Packaging must adhere to environmentally preferable standards, favoring reusable, returnable, or recyclable materials with exceptions only for specialized packaging such as temperature-controlled or hazardous material transport, and packaging tape. Each shipment must include a detailed packing slip with item description, quantity, part numbers, contract ID, CRN, and BN, along with tracking information and any signed inspection vouchers if applicable. Invoices must be submitted electronically to nrc.invoice-facture.cnrc@nrc-cnrc.gc.ca with a copy to the Contracting Authority and must include all required financial details, excluding applicable taxes. Payment is due within 30 days of receipt of a conforming invoice, with interest applied at the Average Rate plus 3 percent per year for overdue amounts. All electrical equipment must be certified under the
National Research Council of Canada

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336413
New
Federal
Procurement of STANDOFF ASSEMBLY for use on MH-65The U.S. Coast Guard’s Aviation Logistics Center is seeking competitive quotations for the procurement of a STANDOFF ASSEMBLY intended for use on MH-65 aircraft, issuing this requirement as a combined synopsis and solicitation under solicitation number 70Z03826QB0000148. This is an unrestricted commercial item acquisition governed by FAR Subpart 12.6 and the Revolutionary FAR Overhaul as of November 28, 2025, with no written solicitation to follow. All quotations must comply with strict traceability requirements, mandating clear, auditable documentation linking every part directly to the Original Equipment Manufacturer, Cobham Exeter, Inc. (Cage Code 60188), and must be newly manufactured commercial items accompanied by a Certificate of Conformance. Compliance with Federal Aviation Administration guidelines is mandatory, and only airworthy commercial or military-specification parts approved under FAA Part 21 will be accepted; no drawings, specifications, or schematics are available from the agency. The North American Industry Classification System code is 336413, with a small business size standard of 1,250 employees, and all responsible sources are invited to submit offers. Quotations must be submitted by email to Selmary.MelendezGonzalez3@uscg.mil with the solicitation number in the subject line, and phone quotes will not be accepted. The deadline for receipt of offers is June 25, 2026, at 9:00 a.m. EDT. The point of contact for inquiries is Selmary Melendez, with secondary support provided by Hartley K. Askew, and the place of performance is based in Elizabeth City, North Carolina.
Aviation Logistics Center (ALC)(00038)

POSTED

2 days ago

DEADLINE

in 5 days
View Details