Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SEAT, MARINE

Active
SPE7M4-26-T-296QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a marine seat identified by NSN 2090-20-008-1750 and part number SWP-1055-LM, with a single unit requirement to be delivered within 20 days under solicitation SPE7M4-26-T-296Q. The item is designated as a restricted source requiring engineering approval from the government design control activity, and strict compliance with DLA packaging standards under MIL-STD-2073-1E and MIL-STD-129 is mandated, including specific packaging methods, materials, and labeling. Mercury and mercury-containing compounds are explicitly prohibited from direct contact with the supply except for approved functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemically specified reagents by NAVSEA, with portable mercury-containing devices requiring shockproof design and secondary containment as per NAVSEA 5100-003D. Delivery is to be made FOB origin to Assault Craft Unit 4 in Virginia Beach, Virginia, with shipment via traceable transportation only—parcel post is strictly prohibited. The required delivery date is July 29, 2026, and the contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The item must be shipped with full documentation and marked according to DLA guidelines, with no special marking required beyond standard compliance.

General Info

Procure one marine seat, NSN 2090-20-008-1750, delivered FOB origin by July 29, 2026, with strict DLA packaging and mercury restrictions.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

336999 - All Other Transportation Equipment ManufacturingView NAICS

Place of Performance

2155 11TH STREET, VIRGINIA BEACH, VA, 23459-3018, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE7M4-26-T-296Q

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Rory O'Reilly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAT,MARINE
SEAT,MARINE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
NOTE: THIS IS A RESTRICTED SOURCE ITEM AND
REQUIRES ENGINEERING SOURCE APPROVAL BY THE
GOVERNMENT DESIGN CONTROL ACTIVITY.
PROFESSIONAL COMPONENTS LTD. 38965 P/N SWP-1055-LM
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017688279 0001 EA 1.000
NSN/MATERIAL:2090200081750
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7M4-26-T-296Q
SECTION B
PR: 7017688279 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:JA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:F
UNIT CONT:E8 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V45472
ASSAULT CRAFT UNIT 4
BLDG 3281
2155 11TH STREET
VIRGINIA BEACH VA 23459-3018
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V45472
ASSAULT CRAFT UNIT 4
BLDG 3821
2155 11TH ST
VIRGINIA BEACH VA 23459-3018
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V454726205FH57
RDD:
PROJ: LK5 TP 3
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A4A DIST: 9B ADV: FC: SR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/29/2026
SPE7M4-26-T-296Q NSN/Part Number: 2090-20-008-1750 Quantity: 1 EA Purchase Request: 7017688279QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336999
New
Federal
Club Car Golf Cart
Solicitation # W911S226U3871
This contract is for the procurement of a Club Car Onward 6-passenger lifted gas-powered golf cart with a 429cc overhead valve engine producing 14.0 HP at 3600 RPM, equipped with a 6.0-gallon fuel capacity and seating for six passengers in a Metallic Tuxedo Black or similar black finish with black or gray upholstery. The vehicle includes middle-row cupholders, a rear flip seat, an under-seat storage tray, and a deluxe rear seat grab bar, along with an independent wide-track double A-arm suspension system and hydraulic shocks for enhanced ride comfort. It features self-adjusting four-wheel mechanical drum brakes, a 6-inch lifted ladder-style aluminum box beam frame, and a large extra-black canopy with a 6-passenger enclosure and valance. The cart is fitted with 14-inch DOT-rated all-terrain tires in a 23x10-14 size, front and rear LED lighting including running lights, tail and brake lights, turn signals controlled via a steering wheel-mounted lever, a fuel meter, horn, and seat belts for all occupants. Additional standard features include wide fender flares, a brush guard, adjustable side mirrors, and a premium tinted folding windshield. The solicitation number is W911S226U3871, issued by the Department of Defense through the Office at Fort Drum, New York, with a response deadline of August 10, 2026, and the NAICS code is 336999 for other transportation equipment manufacturing.
W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 336999
New
Federal
Supply of 4-Passenger Electric Golf Carts with Weather EnclosuresThe contract requires the supply of four electric golf carts featuring 6-passenger seating, weather-resistant enclosures, 3-inch lift kits, rear trunks, and DOT-approved 3-point seat belts for enhanced safety and functionality. Each unit must be capable of reaching a top speed of 25 miles per hour and operate for a minimum of 40 miles on a single charge, ensuring reliable performance under varied conditions. The vehicles must include standard wall-charging capability for convenient and consistent recharging. All units are to be delivered to a location with a postal code of 78150, with a response deadline of August 6, 2026. The solicitation falls under the NAICS code 336999 for other transportation equipment manufacturing and is classified as a subcontract issued by the Department of Defense through the FA3016 502 Cons Cl office.
FA3016 502 Cons Cl

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 336999
New
Federal
High-Performance Snowmobile SupplyThe contract seeks the supply of two 2027 Ski-Doo Expedition Xtreme snowmobiles engineered for extreme arctic conditions, featuring 840cc engines, 154-inch tracks, and a dry weight of no more than 610 pounds to ensure optimal performance in deep snow and remote terrains. These units are specifically configured for demanding operational environments requiring reliability, durability, and lightweight mobility under harsh winter conditions. The solicitation is issued as a subcontract under a Small Business Set Aside designation, reserved exclusively for small businesses, and falls under the NAICS code 336999 for other transportation equipment manufacturing. Bids must be submitted by August 10, 2026, and the opportunity is managed by the Department of the Interior's Office of Acquisition Grants with no specified place of performance beyond the general scope of arctic operations.
Office Of Acquisiton Grants

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 336999
New
Federal
HQ AETC - Golf Carts
Solicitation # F3PF1K6202AC01
This notice is a sources sought announcement issued by the Department of Defense through the 502 Cons Cl office at JBSA Lackland, Texas, seeking input from small businesses regarding the potential procurement of four golf carts to support HQ AETC operations. The notice explicitly states it is for planning purposes only and does not constitute a solicitation, nor does it guarantee that a contract will be awarded. Responses are requested to help the government assess market interest, identify qualified small business sources, and determine the feasibility of a small business set-aside for this procurement. Respondents are informed that no compensation will be provided for time, effort, or costs incurred in submitting information, and all submissions become the property of the government without return. The North American Industry Classification System code associated with this effort is 336999, and the place of performance is listed as Texas with a zip code of 78150. The primary point of contact for questions is Brenna Freel, reachable by phone at 210-652-9944 or email at brenna.freel@us.af.mil, with Mercedes Perez serving as the secondary contact. The notice was posted on July 31, 2026, and responses must be submitted by 4:00 PM Eastern Time on August 6, 2026. This is not an invitation to bid or quote; it is solely a market research tool aimed at informing future contracting decisions.
FA3016 502 Cons Cl

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 336999
New
Federal
Utility Terrain Vehicles
Solicitation # W911S226U3835
The contract is for Utility Terrain Vehicles under solicitation number W911S226U3835, posted on July 31, 2026, with a response deadline of August 3, 2026. It is a combined solicitation with a Small Business Set Aside designation, meaning only small businesses are eligible to compete. The NAICS code has been amended to 336999, reflecting the specific classification for Utility Terrain Vehicles, and the requirement for Material Safety Data Sheets has been removed since they are not needed for this equipment. The contracting office is the W6QM Micc-Ft Drum under the Department of Defense, located in Fort Drum, New York, with a ZIP code of 13602-5220, while the place of performance is in an unspecified location with ZIP 42223. Primary point of contact is Henry Ingram, reachable via email at henry.l.ingram4.civ@army.mil or phone at 2707982649. The opportunity can be viewed online through the SAM.gov portal.
W6QM Micc-Ft Drum

POSTED

2 days ago

DEADLINE

in about 24 hours
View Details
NAICS: 336999
New
Federal
Replacement Utility Cart
Solicitation # 52000QU260026714
The U.S. Coast Guard’s Surface Forces Logistics Center is soliciting sealed quotations for a Firm Fixed Price Purchase Order to acquire one 2023 Cushman Hauler ProX Elite lithium electric utility cart with specific configurations including red and gray seating, 20-inch loadstar tires, tail and brake lights, rocker panel/fender flare, glovebox, turn signals, canopy top, full windshield, brush guard, and limited slip differential. The solicitation, identified as 52000QU260026714, is issued as a combined synopsis/solicitation under FAR Subpart 12.6 and is open to all responsible sources, with a Small Business Set Aside designation. Responses must be submitted via email by August 5, 2026, at 9:00 AM Eastern Time, with the solicitation number included in the subject line. Quotes must include professionally engineered drawings specified in the Statement of Work, which will be reviewed by the U.S. Coast Guard Yard’s Structural and Safety departments for compliance. Award will be made on a best value basis, evaluating technical compliance, adherence to deadlines, and price, with past performance assessed only for responsibility determination. All awarded vendors will be paid via Government Purchase Order on a Net 30 basis with no advance or down payments; vendors assume full financial responsibility until delivery and acceptance by the Coast Guard. Invoicing must occur exclusively through the IPP portal at www.ipp.gov and must include the CG Purchase Order number, vendor invoice number, CAGE code, PO item number, detailed description, unit and extended pricing, and shipping costs listed separately—shipping exceeding $100 requires a supplemental freight invoice. Compliance with multiple FAR clauses is mandatory, including restrictions on telecommunications equipment from Kaspersky Lab, covered telecommunications services, and prohibitions on DEI discrimination by contractors. The item is to be delivered to the USCG Yard at 2401 Hawkins Point Road, Baltimore, MD 21226, with performance occurring at Curtis Bay, Maryland. Interested vendors wishing to conduct a site visit must contact Thomas F. Sparr to schedule.
Sflc Procurement Branch 3(00040)

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336999
New
DIBBS
Precision Manufacturing of Control Assembly (NSN 2590009778976)The contract requests the manufacture and delivery of 25 military-grade CONTROL ASSEMBLIES identified by NSN 2590009778976, all of which must fully comply with established technical specifications to meet defense standards. Delivery is to be made FOB origin, meaning the supplier assumes responsibility for the goods until they are loaded at the point of manufacture, after which risk and cost transfer to the government. Inspection and acceptance of the units will be conducted by the Defense Contract Management Agency to ensure all requirements are met prior to payment or deployment. The solicitation is classified as a subcontract under NAICS code 336999, indicating it falls under other transportation equipment manufacturing. The place of performance is specified as Anniston, Alabama, with a ZIP code of 36201-4199, suggesting the finished products must be delivered to this location or a designated military receiving point. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense under the LAND SUPPLIER OPNS VEHICLE SPT organization. The contract is accessible via the DIBBS portal for qualified suppliers to review and respond to the requirements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336999
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L0-26-T-0390
The contract is for the procurement of two units of a vehicular bracket identified by NSN 2590016305902 and OSHKOSH DEFENSE LLC part number 3979571, under solicitation SPE7L0-26-T-0390. This is a restricted source item requiring government engineering source approval and is designated as a critical application item. Delivery is due within five days of order placement, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements for Procurement, and all technical and quality requirements referenced in the DLA Master List take precedence. The item must be shipped by the fastest traceable means, excluding parcel post, to the designated DLA logistics center in Texarkana, Texas, with specific mark-for and freight shipping addresses provided. The required delivery date is March 23, 2026, and the contract includes detailed government-use codes and tracking identifiers.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336999
New
Federal
TRACKED AMPHIBIOUS VEHICLE FOR FWS FIRE MANAGEMENT
Solicitation # 140FS326Q0118
The U.S. Fish and Wildlife Service, through the Department of the Interior, has issued a solicitation for a tracked amphibious vehicle to support fire management operations, with the solicitation number 140FS326Q0118 posted on July 30, 2026, and a response deadline of August 6, 2026, at 9:00 PM Eastern Time. This procurement is designated as a Small Business Set Aside under NAICS code 336999, which covers other transportation equipment manufacturing, and is open exclusively to small businesses. The vehicle must be capable of operating in wetland and fire-prone environments, providing reliable mobility for fire suppression and management teams across challenging terrain. The contract will be managed by the FWS Sat Team 3, located in Falls Church, Virginia, with Chantal Bashizi serving as the primary point of contact for inquiries, reachable via phone or email. The place of performance for this vehicle is undefined at this time, indicating flexibility in deployment based on operational needs across federal wildland fire zones. All proposals must meet technical and operational specifications required for amphibious and tracked functionality under extreme conditions, and bidders are expected to deliver a vehicle that aligns with the agency's mission of protecting natural resources during wildfire events. The solicitation is available through the SAM.gov portal and requires detailed submissions addressing capability, durability, maintenance protocols, and compliance with federal procurement standards. Failure to submit before the deadline or incomplete responses may result in disqualification, and awards will be made based on best value to the government within the small business set-aside parameters.
Fws Sat Team 3

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 336999
New
Federal
Utility Vehicle
Solicitation # W911S226U3879
The contract is for a utility vehicle with a 352cc liquid-cooled EFI engine delivering 25.5 HP, featuring a selectable 2WD or 4WD drive system with front and rear locking differentials, and a CVT transmission offering High, Low, Neutral, and Reverse modes. The vehicle includes a steel dump bed with a 330 lb cargo capacity, seating for two, independent double A-arm suspension front and rear, hydraulic disc brakes on all wheels, 11 inches of ground clearance, and a top speed of up to 36 mph. It requires diesel fuel and has a towing capacity of 1,000 lb. The vehicle must be manufactured in the USA and is offered in configurations with and without doors. The solicitation number is W911S226U3879, posted on July 30, 2026, with a response deadline of August 6, 2026, and is designated as a Small Business Set Aside. The NAICS code has been amended to 336999, and the contracting office is the Department of Defense at Fort Drum, New York, with Suzanne Greenway as the primary point of contact.
W6QM Micc-Ft Drum

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 336999
New
DIBBS
SHELF, STOWAGE, VEHIC
Solicitation # SPE7L1-26-T-885N
This contract pertains to the procurement of a single unit of a shelf, stowage, and vehicle-compatible item identified by NSN 2590-01-626-9401 and part number SUB1074, with a total quantity of one unit and a unit price of one dollar. Delivery is required within 20 days at the destination, specifically to the USS JOHN P MURTHA LPD 26 at FPO AP 96694, under FOB destination terms with no tolerance for quantity variance. Inspection and acceptance both occur at the delivery point. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA packaging standards. The item is subject to strict prohibitions against ozone-depleting chemicals in any form, and any substitute chemicals must be pre-approved unless explicitly authorized by the specifications. Transportation must use the fastest traceable means, excluding parcel post, and shipping instructions reference specific DLA procedural notes for vessel and first destination transport. The contract references technical and quality requirements from the DLA Master List, controlled by the revision in effect on the solicitation issue date, and uses the DoD authorized unit of issue. The solicitation was issued under SPE7L1-26-T-885N with a response deadline of August 10, 2026, and an original required delivery date of July 23, 2026, with no need ship date specified. The contracting activity falls under the Department of Defense’s Land Supply Chain, with Kristina Derry identified as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 336999
New
Federal
FCC Yazoo City Heated/Ambient Cart - Food Service
Solicitation # 072826-1
The Federal Bureau of Prisons is soliciting a 100% small business set-aside for the procurement of three JonesZylon JZH-198 Heated Cabinets with removable heaters, delivered FOB destination to FCC Yazoo City in Mississippi, under a firm-fixed-price contract with a government estimated cost baseline of $30,039.75. The solicitation, issued under SAM.gov with notice ID 072826, requires all proposals to be submitted electronically by 12:00 PM CST on August 3, 2026, to C. Tate at c3tate@bop.gov, and mandates strict adherence to technical specifications including 18-gauge stainless steel construction, 1-inch high-density fiberglass insulation, a side-mount removable heating assembly convertible to ambient mode, 120V 1700W 14.2A power configuration, compatibility with specific segregation tray capacities, and institutional-grade security features such as tamper-resistant screws, a lockable 12-gauge transport latch, and a non-marking vinyl bumper. Shipping and delivery costs are to be included either in the unit price or separately itemized under CLIN 0002, with the delivery point being the FCC Yazoo City warehouse between 8:00 AM and 2:00 PM local time on weekdays, excluding federal holidays. Contractors must coordinate deliveries 48 hours in advance, and all drivers and vehicles are subject to full search and background checks upon entry, with strict prohibition of contraband and mandatory tool accountability procedures. All offerors must provide current SAM.gov certifications, an active Unique Entity ID, manufacturer specification sheets verifying full compliance with every salient requirement, and a signed firm-fixed-price quote. Evaluation will follow the Lowest Price Technically Acceptable method, with technical acceptability determined by pass/fail criteria based on exact alignment with the listed specifications and past performance reviewed neutrally for entities without a record. The contract is restricted to the named brand due to specialized security and infrastructure compatibility needs, and no options or alternative products are permitted.
FCC Yazoo City

POSTED

5 days ago

DEADLINE

in about 22 hours
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 335312
New
DIBBS
STARTER, MOTOR
Solicitation # SPE7M4-26-T-296S
This contract specifies the procurement of a starter motor identified by NSN 6110017187462 and part number S801V50N3S from Eaton Corporation, with a quantity of three units to be delivered FOB origin within 126 days, with no tolerance for variance in quantity. The item is designated as a critical application item, and strict compliance with DLA’s Master List of Technical and Quality Requirements is required, which overrides all other specifications including ASTM D3951 for packaging. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 packaging requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Delivery is to be made to the designated receiving warehouse in Tracy, California, with inspection and acceptance occurring at the destination. The contract enforces DLA’s authorized unit of issue and references official DLA guidance for unit conversion. All technical and quality standards referenced take precedence over general standards, and the requirement for government identification removal from non-accepted supplies is in effect. The solicitation number is SPE7M4-26-T-296S, with a response deadline of August 13, 2026, and the item falls under NAICS code 335312 for motor vehicle electrical and electronic equipment manufacturing.
Motor and Generator Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
ACCUMULATOR, HYDRAUL
Solicitation # SPE7M4-26-T-296W
The contract is for the procurement of five hydraulic accumulators, part number 608712 and NSN 3040-00-957-3601, supplied by EATON AEROSPACE, LLC, with a total value of $25.00 at $5.00 per unit. The item is classified as a critical application item and must be delivered in strict compliance with DLA packaging requirements, specifically ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence over this standard. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 guidelines. The unit of issue is each, with no variance allowed in quantity—exactly five units must be delivered. Delivery is FOB origin with inspection and acceptance occurring at the destination, and delivery is required within 158 days of the contract award, with an original required delivery date of May 28, 2027, and a need ship date of January 19, 2027. The items must be shipped to the DLA Distribution Depot Hill at Hill AFB, Utah, with transportation handled according to DLAD Proc Note C19 for main shipment and C20 for first destination. Government identification must be removed from non-accepted supplies, and the solicitation number is SPE7M4-26-T-296W, issued under NAICS code 333613 by the Department of Defense’s Fluid Handling Division.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
REDUCER, BEAD
Solicitation # SPE7M3-26-T-7805
This contract is for the procurement of one unit of a REDUCER, BEAD with NSN 4730-01-664-8190 under solicitation SPE7M3-26-T-7805, issued by the Department of Defense’s Fluid Handling Division. The item must be delivered within 348 days to the DLA Distribution facility in New Cumberland, Pennsylvania, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while strictly adhering to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards. All packaging and labeling must follow MIL-STD-129, and palletization must meet DLA’s specific packaging guidelines. The product must be free of mercury and mercury-containing compounds except for approved functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are entirely prohibited, and any substitutions require prior approval. The unit of issue is each (EA), and the contractual price is set at $1.00 per unit. The required delivery date is July 28, 2027, with the original response deadline for the solicitation having passed on August 13, 2026. Technical and quality requirements referenced are governed by the DLA Master List version in effect at the time of solicitation issuance.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-297T
This contract specifies the procurement of a nonmetallic hose assembly with NSN 4720-01-494-5683 and part number 7-554-202801, issued by the Department of Defense through the Fluid Handling Division. Four units are required at a unit price of $4.00, totaling $16.00, with delivery due within 130 days to DLA Distribution Barstow, California, under FOB origin terms. The order carries a strict zero percent quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, containerization, and marking in accordance with MIL-STD-129, with no special marking required. All technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with the revision effective on the solicitation issue date controlling. The contract is linked to solicitation SPE7M4-26-T-297T, which was posted on August 2, 2026, with responses due by August 13, 2026, and the NAICS code is 332999. The primary point of contact is Blake Tushar, reachable via phone and email. Transportation and shipping instructions follow DLAD procedural notes C19 and C20.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
SLEEVE, REINFORCING,
Solicitation # SPE7M4-26-T-297N
This contract specifies the procurement of a reinforcing sleeve for hose applications under military specification, with strict adherence to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The item is designated as a critical application requiring engineering source approval and is restricted to approved suppliers including Boeing, Eaton Aeroquip, Smiths Tubular Systems, and Parker Hannifin, all supplying the same part number BACH8A04EE0130B. Compliance with MIL-STD-130N for Item Unique Identification and DFARS 252.211-7003 is mandatory, alongside traceability documentation per DLA Procurement Note C03 (August 2016). The product must not contain any Class I ozone-depleting chemicals, and all packaging, preservation, and marking must conform to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging standards. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels based on criticality. Delivery is FOB origin, with a strict quantity of eight units, no variance allowed, arriving at the DLA distribution facility in New Cumberland, PA within 25 days of order, with a required ship date of September 8, 2026. All data and documentation must remain under government control, and the item is subject to covered defense information protocols under RD002.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-297A
The contract pertains to the procurement of four nonmetallic hose assemblies with part numbers F722J9J7121212-84 and F722TCJ9J1121212-84-000, supplied by Parker-Hannifin Corporation under NSN 4720-01-480-6648. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and unspecified attributes are treated as major. Verification levels and AQLs are defined for critical, major, and minor attributes, with the manufacturer permitted to choose attribute or variable inspection under MIL-STD-1916 unless restricted. Packaging must comply with ASTM D3951 and MIL-STD-129, with all labeling and marking adhering to DLA standards, and palletization according to RP001 requirements. The DLA Master List takes precedence over ASTM D3951. Delivery is FOB origin with a 137-day lead time, and inspection and acceptance occur at destination. The unit of issue is each, with a fixed quantity of four units and no variance permitted. The delivery address is DLA Distribution Albany in Albany, Georgia, with a required ship date of December 29, 2026. The solicitation, issued under SPE7M4-26-T-297A, was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-297P
This contract specifies the procurement of a nonmetallic hose assembly with part number 591200-51 and NSN 4720016541086, quantity of three units, to be delivered FOB origin within 39 days of contract award, with a required delivery date of May 2, 2026 and a need ship date of September 22, 2026. The item is classified as a critical application item with no shelf life requirement and must comply with extensive technical and quality standards referenced through DLA master lists, including preservation, packaging, and marking requirements per MIL-STD-2073-1E and MIL-STD-129. All units must be marked with the NSN, contract number, lot number, contractor and manufacturer CAGE codes, and part number, with special marking codes not applicable. Packaging must adhere to DLA packaging requirements and palletization standards, with each unit contained in a D3 unit package within an E5 intermediate container. The contract mandates compliance with stringent traceability and identification protocols, including retention of supply chain documentation per DLA Procurement Note C03, Item Unique Identification (IUID) following MIL-STD-130 and DFARS 252.211-7003, and FAA bare item marking requirements. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with verification levels or AQLs as dictated by applicable documents. Acceptance occurs at the destination, with no variance allowed in quantity. Shipping and delivery instructions direct all units to the DLA Distribution facility in New Cumberland, PA, and transportation logistics are governed by DLA Procurement Notes C19 and C20. The solicitation, issued under contract number SPE7M4-26-T-297P, is for a federal acquisition under NAICS code 326220 with Blake Tushar as the point of contact.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336411
New
DIBBS
BODY, VALVE
Solicitation # SPE7M4-26-T-297W
The contract pertains to the procurement of a BODY, VALVE with a matched set SEAL RING, identified by NSN 4820-00-404-6625, for a quantity of five units under purchase request 7017695673. Delivery is required within 165 days from award, and the solicitation number is SPE7M4-26-T-297W, issued by the Department of Defense’s Fluid Handling Division. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of either the solicitation issue date or award date depending on the scale of the acquisition. Subcontractors must comply with DLA packaging requirements and are required to remove government identification from non-accepted supplies. No bidset is available from DLA, and the alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The prime contractor is Eaton Aerospace LLC dba Sterer Engineering, and the place of performance is New Cumberland, Pennsylvania, with Rory O’Reilly listed as the primary point of contact. The NAICS code is 336411, and the solicitation closes on August 13, 2026.
Aircraft Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 114119
New
DIBBS
CABINET, KEY
Solicitation # SPE7M4-26-T-296X
The contract pertains to the procurement of a cabinet key under NSN 2090-00-904-6699, with a quantity of 63 units, to be delivered FOB origin within 123 days by December 15, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements. The hinge must be provided with a fast-type pin, and piece number 22, the bulkhead clip, must be supplied in specified dimensions of 1 inch long by 3/4 inch wide by 1/8 inch thick, with part number HPC-511. The unit of issue is each (EA), with no variance allowed in quantity. Inspection and acceptance occur at the destination, and delivery must be made to the designated receiving warehouse in Tracy, California. Transportation procedures must follow DLAD Proc Notes C19 and C20. The solicitation number is SPE7M4-26-T-296X, issued by the Department of Defense’s Fluid Handling Division, with primary point of contact Rory O’Reilly.
Other Marine Fishing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
PLUG, PIPE
Solicitation # SPE7M3-26-T-7794
The contract specifies the procurement of one plug and pipe assembly with NSN 4730-01-549-7774 under solicitation SPE7M3-26-T-7794, requiring delivery within 20 days FOB origin with no variance in quantity. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence over this standard. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA’s RP001 packaging guidelines. The shipment must be sent via traceable freight methods, explicitly prohibiting parcel post, and directed to the designated military delivery address at Moody AFB, Georgia. The unit of issue is each, priced at $1.00, with inspection and acceptance occurring at the destination. The supplier is identified as GENERAC MOBILE PRODUCTS, LLC, and the required delivery date is July 29, 2026, with solicitation responses due by August 13, 2026. Government use identifiers and codes are included for internal logistics and tracking purposes.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, WATER INLET FI
Solicitation # SPE7M3-26-T-7801
The contract pertains to the procurement of eight units of a water inlet fitting, identified by NSN 4730-00-928-6499, under solicitation SPE7M3-26-T-7801, with a response deadline of August 13, 2026. Delivery is required within 307 days of award. The item is subject to stringent export control regulations under either ITAR or EAR, prohibiting any unauthorized disclosure or transfer of associated technical data to foreign persons, regardless of location, and mandating compliance with DFARS 252.225-7048. Only DLA contractors possessing valid US/Canada Joint Certification Program certification, who have completed mandatory training on handling export-controlled technical data and submitted the required DLA questionnaire, are authorized to access this information. The contract is administered by the Department of Defense’s Fluid Handling Division, with performance designated for Tracy, California, 95304-5000. The primary point of contact is William Cain, reachable via email and phone provided. The solicitation is classified under NAICS code 332996 and requires compliance with DLA packaging standards and CMMC Level 2 certification for third-party assessors.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
GAGE ROD-CAP, LIQUID
Solicitation # SPE7M4-26-T-297Y
The contract pertains to the procurement of 55 units of a GAGE ROD-CAP, LIQUID LEVEL with NSN 6680-01-299-3387 under solicitation SPE7M4-26-T-297Y, with a delivery requirement of 95 days after contract award. The item is designated as a source control item and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which must be complied with in full. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with attributes classified as critical, major, or minor assigned verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Zero non-conformances are required in the sample lot unless otherwise directed in the contract. The item is classified under NAICS 334519 and is governed by cybersecurity requirements mandating CMMC Level 2 certification for the third-party assessment organization involved. Export control regulations under ITAR or EAR apply to associated technical data, restricting disclosure to foreign persons anywhere, including U.S. subsidiaries and employees, and require compliance with DFARS 252.225-7048. Access to this data is limited to approved DLA contractors with JCP certification, completion of mandatory training on handling export-controlled technical data, and approval from the DLA controlling authority. Packaging must adhere to DLA packaging requirements, and government identification must be removed from non-accepted supplies. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and performance is to occur in Corpus Christi, Texas.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details