Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SEAT, SOLENOID

Active
SPE4A5-26-T-291FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the procurement of two SEAT, SOLENOID units with NSN 4930011259991 and part number 2763270-101, sourced from Parker-Hannifin Corporation in Irvine, CA, identified as a commercial item and critical application item. The total contract value is $4.00, with delivery required within 20 days of order placement under FOB Origin terms, meaning title and risk transfer upon delivery at the contractor’s facility. Inspection and acceptance occur at the origin, and the item must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including mandatory barcoding, with no special marking required. Preservation follows Method 31 (Clean and Dry) with Level 1 climate control and no special preservation material. Quality control mandates sampling per MIL-STD-1916 or zero-conformance methods under MIL-STD-105/ASQ Z1.4, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes deemed major. Delivery is destined for the Defence Forces Logistics Command in Tampere, Finland, with freight handled by Blue Water Shipping US Inc. All submissions must be made electronically via DIBBS by July 23, 2026, under the simplified acquisition procedures of SPE4A5-26-T-291F, with payment processed through WAWF. The item is subject to multiple DFARS and FAR clauses including trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, prohibition of hexavalent chromium, safeguarding covered defense information, cybersecurity reporting, electronic payment submission, and restrictions on procurement from communist Chinese military companies. The contractor must also comply with DLA’s Master List of Technical and Quality Requirements, maintain UEI and CAGE codes, and adhere to all representations regarding size status and socioeconomic certifications.

General Info

Procurement of two SEAT SOLENOID units, part 2763270-101, FOB origin, delivery to Finland by July 15, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

333912 - Air and Gas Compressor ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-291F for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Andrew Kish
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAT,SOLENOID
SEAT,SOLENOID
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
PARKER-HANNIFIN
IRVINE CA
CRITICAL APPLICATION ITEM
PARKER-HANNIFIN CORPORATION 3H889 P/N 2763270-101
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-T-291F
SECTION B
PR: 7017466937 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017466937 0001 EA 2.000
NSN/MATERIAL:4930011259991
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:DA OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
DFI004
BLUE WATER SHIPPING US INC
ATTN FDFLOGCOM
14802 NW 107TH AVE SUITE 1
HIALEAH GARDENS, FL 33018
US
FREIGHT SHIPPING ADDRESS:
DFIA00
DEFENCE FORCES LOGISTICS COMMAND
HATANPAAN VALTATIE 30
33541 TAMPERE
TAMPERE
FI
MARKFOR
DFIA00
DEFENCE FORCES LOGISTICS COMMAND
HATANPAAN VALTATIE 30
33541 TAMPERE
TAMPERE
FI
M/F: (TCN) PFIA5460636499
RDD:
PROJ: 201 TP 2
SUPP ADD: DA4GAU SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 07
SPE4A5-26-T-291F
SECTION B
PR: 7017466937 PRLI: 0001 CONT’D
DIC: A01 DIST: F9B ADV: 26 FC: 48
Need Ship Date:00/00/0000 Original Required Delivery Date:07/15/2026
SPE4A5-26-T-291F NSN/Part Number: 4930-01-125-9991 Quantity: 2 EA Purchase Request: 7017466937QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333912
New
DIBBS
VALVE, FREE AIR UNLO
Solicitation # SPE7M0-26-T-031C
The contract is for the procurement of two free air unloader valves under NSN 4310-01-275-0598, with a required delivery within five days of award, delivered FOB origin. The item is classified as a critical application component, and only two approved suppliers—Ingersoll-Rand Company DBA 51436 with part number 30386478 and Siemens Energy, Inc. with part number 42108597—are qualified. Strict compliance with DLA packaging requirements and MIL-STD-2073-1E is mandated, including specific packaging methods, materials, and unit container codes, with marking conforming to MIL-STD-129 and no special markings required. The shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post, and directed to the Military Sealift Command in San Diego, California. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for functional uses in specified items like batteries, fluorescent lights, sensors, or weapons systems as defined by NAVSEA, with portable devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The contract enforces a zero variance in quantity and requires inspection and acceptance at destination, with the original required delivery date set for January 28, 2025. All technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The contract is issued under solicitation SPE7M0-26-T-031C, with a primary point of contact at the Defense Logistics Agency and a NAICS code of 333912 for industrial machinery manufacturing.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
DIBBS
FILTER, FLUID
Solicitation # SPE8EE-26-T-2215
The contract is for the procurement of one fluid filter with NSN 4930-01-724-0727 under solicitation SPE8EE-26-T-2215, requiring delivery within 20 days FOB origin with no quantity variance allowed. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede general standards such as ASTM D3951. Packaging must conform to MIL-STD-129 labeling and DLA Packaging Requirements RP001, including palletization standards, and the Unit of Issue is one each. The item must be shipped via traceable freight methods, not parcel post, to the designated military delivery point in Bridgeport, California, with freight shipping instructions specifying the building, address, and contact details. The Required Delivery Date is July 31, 2026, and the contract mandates full compliance with documentation criteria for source approval, removal of government identification from non-accepted supplies, and adherence to all specified DLA directives. Government-specific tracking codes, projected information, and points of contact including Philip Ferrara are provided for institutional use and procurement oversight.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
DIBBS
FILTER-REGULATOR, AI
Solicitation # SPE7M2-26-T-5989
The contract specifies the procurement of five Filter-Regulator, AI units under NSN 4930-01-561-7701, with a unit price of $5.00 and a total value of $25.00, awarded under solicitation SPE7M2-26-T-5989. Delivery is required within 154 days from the contract award date, with FOB origin shipping terms, and inspection and acceptance points set at the destination. Packaging must conform to MIL-STD-2073-1E, with specific preservation methods, wrap materials, and unit container codes, and marking must follow MIL-STD-129 without special markings. Palletization adheres to DLA packaging requirements, and the delivery address is the DLA Distribution facility in New Cumberland, PA. The item is subject to strict prohibition against intentional addition of mercury or mercury-containing compounds, except for functional uses in specified equipment like batteries, fluorescent lamps, instruments, and naval-referenced chemical reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions controlled by the solicitation or award date depending on acquisition size. The required ship date is January 19, 2027, with the original delivery deadline set for April 1, 2027, and all transportation logistics follow DLA procedural notes C19 and C20.
NUCLEAR REACTOR PROGRAM

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
DIBBS
EXHAUST PIPE ASSEMB
Solicitation # SPE7M0-26-T-031H
The contract pertains to the procurement of one exhaust pipe assembly with NSN 4310-01-584-3047 and part number 158-71804, supplied by Atlas Copco Hurricane LLC dba 50GK4. The item must be delivered within five days of contract award, free on board origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129, adhering strictly to DLA’s Packaging Requirements for Procurement (RP001) and palletization standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by technical specifications. The delivery address is the Marine Aviation Logistics Squadron 14 at Cherry Point, North Carolina, with shipment required via the fastest traceable means—parcel post is prohibited. The required delivery date is August 4, 2026, and the contract is governed by the DLA Master List of Technical and Quality Requirements, which supersedes all other specifications. The solicitation number is SPE7M0-26-T-031H, with a response deadline of August 17, 2026, and the primary point of contact is Grace Beck of the Department of Defense.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
SLED
Ingersoll Rand Air Compressor
Solicitation # QQ-125644
The supplier is required to provide an Ingersoll Rand air compressor matching the exact model specified in the line item description, with no substitutions permitted under any circumstances. The equipment must be delivered to the Northern Virginia Science Center located in Sterling, Virginia, and installation services are not required as part of this procurement. The solicitation, identified by number QQ-125644, was posted on August 4, 2026, with responses due by August 11, 2026, at 10:00 PM Eastern Time. This contract is issued by the Science Museum of Virginia under the state of Virginia and falls under a SLED procurement type. All communications regarding this contract should be directed to Laura Dearhart at ldearhart@smv.org or by phone at 804-864-1532.
Science Museum of Virginia

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333912
New
Federal
Supply of Sauer Compressor Units (Mistral Series WP22L)The contract calls for the procurement and delivery of two Sauer Mistral Series WP22L air compressor units for installation aboard USNS YUMA (T-EPF 8), with all components and systems required to meet Department of Defense supply chain, packaging, and marking standards to ensure full operational compatibility and logistics compliance. The equipment must be sourced, manufactured, and delivered in accordance with federal specifications applicable to military vessels, including rigorous quality control and documentation protocols to support long-term maintenance and readiness. This is a small business set-aside subcontract under NAICS code 333912, exclusively available to qualified small businesses, and is being managed by the Department of Defense through MSCHQ Norfolk. The solicitation was posted on August 4, 2026, with proposals due by August 20, 2026, at 2:00 PM. The compressors are critical to shipboard operations and must be delivered ready for immediate integration, with all packaging and labeling adhering to DoD requirements to facilitate smooth receipt, inspection, and installation aboard the vessel.
Mschq Norfolk

POSTED

about 22 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333912
New
Federal
USNS YUMA (T-EPF 8) - Air Compressors
Solicitation # N3220526Q7226
The Military Sealift Command is seeking to procure brand name Sauer Compressor parts for installation and maintenance aboard the USNS YUMA (T-EPF 9), a critical vessel in the Navy’s expeditionary fleet. This procurement is being conducted under solicitation number N3220526Q7226, which was posted on August 4, 2026, with a response deadline of August 20, 2026. The contract is designated as a Small Business Set Aside - Total, meaning only small businesses are eligible to compete, and it falls under NAICS code 333912, which covers other commercial and service industry machinery manufacturing. All parts must meet strict brand name specifications to ensure compatibility, reliability, and operational readiness onboard the ship. The contracting activity is managed by the Military Sealift Command in Norfolk, Virginia, with Richard Bell serving as the primary point of contact for inquiries and submissions. Proposals must be submitted through the SAM.gov platform, and while the place of performance is not geographically specified, the parts are intended for use directly on the USNS YUMA, requiring timely delivery and adherence to military-grade quality standards. The contract type is combined, indicating it may include both requirements and incentive structures, and the agency emphasizes the urgency of sourcing authentic Sauer components to maintain the integrity of the ship’s air compression systems during ongoing missions.
Mschq Norfolk

POSTED

about 22 hours ago

DEADLINE

in 16 days
View Details
NAICS: 333912
New
Federal
Air System
Solicitation # FA3010_Air_System_Mendoza
This notice is a sources sought announcement for an air system to be procured at Keesler Air Force Base in Mississippi, intended solely for market research and not as a solicitation for proposals. It clearly states that no contract will result from this notice, and no payments will be made for any costs incurred in responding. Submissions are non-binding, become government property, and do not guarantee future opportunities, though failure to respond does not disqualify interested parties from participating in any future formal solicitation. All responders must provide their company name, address, phone number, point of contact, CAGE code, size status, and ownership information, along with a written statement confirming their ability to meet the government’s specified requirements in the Statement of Objectives, including product literature and availability on a Federal Supply Schedule contract. Responses must be submitted via email by 2:00 PM CDT on Monday, August 10, 2026, to the designated contacts, with senders responsible for verifying receipt prior to the deadline. The announcement is issued under NAICS code 333912 by the Department of Defense through the FA3010 81 Cons Cc office, with performance expected to occur in Biloxi, Mississippi, and no set-aside provisions apply. Interested parties are required to monitor SAM.gov for any future updates or solicitations.
FA3010 81 Cons Cc

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333912
New
Federal
SEPARATOR 1st/2nd
Solicitation # SPMYM226Q7876
DLA Maritime Puget Sound is issuing a solicitation for the procurement of SEPARATOR 1st/2nd components under a 100% Small Business Set Aside using commercial and simplified acquisition procedures, exclusively awarding the contract to Sauer Compressors USA, Inc. as the sole source. The award will be a firm fixed-price supply contract with FOB Destination delivery to Puget Sound Naval Shipyard at Building 514 D1, 1400 Farragut Ave, Bremerton, WA 98314-5001. The transaction is governed by NAICS code 333912 and Product Service Code 4310, and all bids must include complete pricing for each CLIN, the vendor’s CAGE code, full representations and certifications, manufacturer details, and a clearly stated lead time for FOB destination delivery. Prospective offerors must be currently registered in SAM.gov and submit a signed, complete original solicitation package. Offers must be submitted by August 5, 2026, at 5:00 p.m. EST, and all questions are to be directed to Naomi Larson at naomi.larson@dla.mil. Contractors subject to NIST SP 800-171 compliance must have a current assessment within the past three years unless the item is identified as Commercial Off-The-Shelf, in which case exemption must be formally claimed and documented during bid submission.
DLA Maritime - Puget Sound

POSTED

about 22 hours ago

DEADLINE

in about 7 hours
View Details
NAICS: 333912
New
Federal
C26-032 Altitude Test Chamber Blower Replacement
Solicitation # F3YCEB6058A101
The 76th CMXG is seeking a direct replacement for the existing Pressure Blower System Model 38406A, Serial Number 27335, used within its Altitude Chamber Test System. The replacement unit must be a centrifugal multistage blower matching the exact form, fit, and function of the original, designated as the Dearing Compressor and Pump Co. Pressure Blower System Part Number DSP-2505-8CM-6-50 or an approved equivalent. It must operate within an inlet air pressure range of 28 to 31 inches HgA and inlet temperatures from 0°F to 115°F, producing 2000 SCFM at 6 psig outlet pressure with a design inlet temperature of 80°F. The unit must include O-rings at all joints, labyrinth seals, and be paired with a 100 HP TEFC premium efficiency motor rated for 460 VAC, 3 phase, 60 Hz, operating at 3600 rpm, and equipped with a conduit box for connection to the existing facility starter. The entire blower and motor assembly must be skid-mounted on an I-beam steel frame with powder coating, include all necessary shaft couplings and safety guards, and be designed to integrate seamlessly with the existing altitude chamber system without requiring modifications. Any substitutions must ensure full compatibility and undergo functional testing to validate performance. The contract is planned as a Firm Fixed Price, with an estimated performance period of 18 to 20 weeks. This requirement is set aside exclusively for small businesses as defined by NAICS code 333912 with a size standard of 1,000 employees, and participation by foreign entities is prohibited. All contractors must be registered in the System for Award Management to be eligible for award, and responses are not accepted until the official Request for Quote is posted.
FA8125 Afsc Pzima

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333912
New
DIBBS
Small Business Subcontracting Support (Opportunistic Supplier Engagement)
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 333912
New
DIBBS
Supply of Compressed Air Cooler Unit (NSN 4310-01-356-8696)
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-329T
The contract specifies the procurement of a dial indicating pressure gauge identified by NSN 6685012957435 and part number SG4MC10KPWRONAG, with a requirement for 20 units delivered FOB origin within 291 days. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling compliance. The item is designated as a critical application with specific identification and marking requirements per MIL-STD-129 and the special marking code 05 for delicate instrument. Packaging must conform to MIL-STD-2073-1E with defined packaging methods, materials, and unit container codes, and palletization must adhere to DLA packaging rules. Mercury and mercury-containing compounds are strictly prohibited unless functional use is explicitly exempted and meets safety standards outlined in NAVSEA 5100-003D, requiring secondary containment for portable devices. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted items. Item Unique Identification is not required per customer request. Measuring and test equipment used must meet RT001 standards, and the contract references the QAP-106 and MIL-G-18997E technical documentation. The purchase request number is 7017742652, the solicitation number is SPE4A5-26-T-329T, and point of contact is Aprile Corley of the Department of Defense’s ASC Supplier Oper OEM Division.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-INDIC
Solicitation # SPE4A5-26-T-330M
The contract specifies the procurement of 36 digital, self-indicating thermometers, identified by the part number FLUKE 62 MAX and NSN 6685-01-613-2829, as a commercial off-the-shelf item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date, depending on the acquisition size. The item must meet stringent packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including a special marking code for “Delicate instrument.” Preservation methods prohibit mercury or mercury compounds in packaging and require dry, controlled environments. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are assigned the highest verification levels. Delivery is FOB origin with a strict 36-unit quantity allowance with no variance permitted, and the item must be delivered to a designated DLA warehouse in Tracy, California, by January 31, 2027, after an initial required delivery date of November 25, 2026. Transportation and shipping instructions align with applicable DLA procedural notes, and the contract is administered under solicitation SPE4A5-26-T-330M with a unit price of $36.00 per unit.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
RELAY BOX ASSY
Solicitation # SPE4A5-26-T-329V
The contract pertains to the procurement of one Relay Box Assembly with part number 145E2032-5 and NSN 6615-01-244-9740, issued under solicitation SPE4A5-26-T-329V by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required within 171 days from the contract award, with FOB origin terms and a strict zero variance in quantity. Inspection and acceptance occur at the manufacturer’s origin, in accordance with MIL-STD-1916 or a comparable zero-based sampling plan, with critical attributes requiring a verification level of VII or an AQL of 0.1. Non-conforming items must have government identification removed prior to return. The contractor must comply with DLA’s tailored quality requirements, packaging standards per MIL-STD-2073-1E, and marking requirements under MIL-STD-129, using code U for packaging and no special marking. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment. The item is not subject to Item Unique Identification. Delivery is to DLA Distribution San Joaquin at Tracy, California, with transportation governed by DLA procedural notes C19 and C20. The contract enforces the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details