Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SEAT, VALVE

Active
SPE7MC-26-T-140XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of one seat valve with NSN 4810-01-591-3504 under solicitation SPE7MC-26-T-140X, issued by the DLA District San Joaquin on behalf of the Department of Defense. The item must be delivered FOB origin within 459 days, with zero tolerance for quantity variance, and is subject to inspection and acceptance at the destination facility in Tracy, California. Strict adherence to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements is mandated, including a special marking instruction to indicate “Arrow Up Open This Side.” The valve is designated as a critical application item, with authorized part numbers from Siemens Government Technologies and Curtiss-Wright Electro-Mechanical Corp. The contract prohibits the use of ozone-depleting chemicals and mercury or mercury-containing compounds in any aspect of the product, preservation, packaging, or marking, with limited exceptions only for specified functional uses as defined by NAVSEA, such as in certain batteries or instruments, which must still meet additional containment standards. All packaging and preservation methods must comply with DLA packaging requirements, and substitute materials require prior approval. The delivery must occur no later than November 2, 2027, though the original required delivery date was October 14, 2026. The item is governed by technical and quality requirements referenced from the DLA Master List, with compliance determined by the revision in effect on the solicitation issue date. Transportation and shipping must follow DLAD procedural notes C19 and C20, and the specified shipping address is the receiving warehouse at 25600 S Chrisman Road, Tracy, CA. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026, under NAICS code 333618. The primary point of contact is Paula McClary, reachable via email and phone provided. The unit of issue is each, and the contract emphasizes full compliance with all applicable DoD procurement standards, including proper identification and traceability of materials, while strictly enforcing environmental restrictions on hazardous substances.

General Info

One seat valve, NSN 4810-01-591-3504, due Nov 2, 2027, FOB origin, strict MIL-STD and environmental compliance required.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

333618 - Other Engine Equipment ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7MC-26-T-140X Maritime Hardware/Electrical

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAT,VALVE
SEAT,VALVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
SIEMENS GOVERNMENT TECHNOLOGIES, 0BR59 P/N 6016362-004
CURTISS-WRIGHT ELECTRO-MECHANICAL CORP 8FGX3 P/N 6016362-004
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7MC-26-T-140X
SECTION B
PR: 7017528792 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017528792 0001 EA 1.000
NSN/MATERIAL:4810015913504
DELIVERY (IN DAYS):0459
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:F
UNIT CONT:F2 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ SPECIAL MARKING REQUIREMENTS: 02 ARROW UP OPEN THIS SIDE
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:11/02/2027 Original Required Delivery Date:10/14/2026
SPE7MC-26-T-140X
SECTION B
PR: 7017528792 PRLI: 0001 CONT’D
SPE7MC-26-T-140X NSN/Part Number: 4810-01-591-3504 Quantity: 1 EA Purchase Request: 7017528792QTY: 1 Delivery: 459 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333618
New
Federal
BELLOWS, EXHAUSTThis contract pertains to the procurement of BELLOWS, EXHAUST under solicitation SPRMM126QGE51, issued by the Department of Defense through DLA Mechanicsburg under Special Emergency Procurement Authority. The quantity has been increased from one to two units, with the quote response deadline extended to July 24, 2026. All terms and conditions remain otherwise unchanged. The item must conform to the specified CAGE code 7PZX0 and reference number 2ASB12003, and must be marked in accordance with MIL-STD-130 Rev N. No drawings or technical data are available, and passive RFID tagging is only required if the ship-to location is listed under DFARS 252.211-7006, which currently does not apply. The contractor is responsible for all inspection and quality assurance activities, must maintain inspection records for 365 days after final delivery, and must ensure compliance with MIL-STD-2073 for packaging. Substitutions require prior written approval with documentation indicating the nature of the change per specified codes. Only authorized distributors of the original manufacturer may submit quotes, and proof of authorization must accompany the proposal. Electronic submission of the invoice and receiving report via PIEE-WAWF is mandatory upon award, and contractors must register for access to the Electronic Document Access tool on PIEE to view orders and modifications. Suppliers providing surplus or newly manufactured surplus materials must include a valid surplus certificate; failure to do so voids the quote. Quotes submitted via EDI must clearly state all exceptions, or award will be based solely on solicitation requirements. The packaging location, if different from the offeror’s address, must be disclosed, and non-manufacturers must identify the OEM by CAGE code and part number. The government retains the right to conduct inspections to verify compliance. Distribution of any Navy-provided documents is governed by one of seven distribution statement codes, and access to certain controlled documents requires formal request and approval. Contractors are encouraged to register for automated notifications through NAVSUP WSS to track contract actions and should provide a valid contact email for follow-up communications.
SPRMM1 DLA Mechanicsburg

POSTED

about 10 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333618
New
Federal
ARM ASSY ROCKERThe contract pertains to the procurement of an ARM ASSY ROCKER under solicitation N0010426QBW21, issued by the Navsup Weapon Systems Support Mechanic office within the Department of Defense. The solicitation requires strict adherence to technical documentation referenced in the Individual Repair Part Ordering Data (IRPOD), which is mandatory for vendor review and forms the core of technical compliance. Compliance with specified revisions of drawings, specifications, and standards is required unless explicitly approved in writing by the Contracting Officer, and contractors must use full document revisions without mixing elements from different versions. Quality assurance responsibilities are defined within the IRPOD, mandating that vendors maintain an inspection system acceptable to the government and retain all inspection records for the duration of the contract and beyond. Packaging must conform to MIL-PRF-23199 and related cleanliness standards, with specific clarification provided on the use of MIL-DTL-24466 green poly bags and the removal of fire retardant packaging requirements. Mercury or mercury-containing compounds are strictly prohibited in any material delivered under this contract. All contractual documents are considered officially issued upon electronic transmission, including email or facsimile, and the government’s acceptance of a proposal constitutes mutual agreement. Pricing submitted must remain valid for 60 days post-closing unless otherwise specified, and all proposals must comply with mandatory clauses including cybersecurity maturity model certification, equal opportunity provisions for veterans and workers with disabilities, small business representations, and security exclusions. The order of precedence for resolving contractual conflicts clearly prioritizes contract amendments, then schedule items, followed by terms and conditions, IRPOD, STRs, drawings, and specifications. Delivery and compliance timelines are tied to the end-of-contract date, with a Certificate of Compliance per DI-MISC-81356 to be submitted at time of material delivery. Technical data requirements are specified through DD Form 1423, with detailed guidance on data item descriptions, inspection and acceptance codes, distribution limitations, and pricing groups. Vendors must register on the BPMI e-commerce portal to access required technical documents and are obligated to request waivers or deviations in advance with full technical justification and supporting data. Non-compliant submissions will be returned without review.
Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333618
New
DIBBS
Supply of Crankshafts for Compressors (NSN 4130003934915)The contract entails the supply and delivery of ten crankshafts designated for use in compressors under the National Stock Number 4130-00-393-4915, with strict adherence to military packaging and marking standards to ensure compatibility and traceability within Department of Defense supply chains. All items must meet defined technical and quality requirements consistent with military specifications, and the contractor is expected to comply fully with handling, labeling, and documentation protocols required for government logistics systems. The solicitation is issued as a subcontract under the NAICS code 333618, which covers other engine equipment manufacturing, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The opportunity was posted on July 19, 2026, with a firm deadline for responses set for July 30, 2026, indicating a timeline typical for defense procurement cycles. While specific performance locations and points of contact are not provided, the work will be carried out under the broader scope of Defense Logistics Agency operations. Interested parties must submit proposals through the official DIBBS platform, accessible via the provided UI link, and ensure all submissions are completed prior to the stated deadline to be considered for award.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
Airtronic Burner Supply and CalibrationThe contract involves the supply of Airtronic brand burners accompanied by comprehensive calibration services and technical integration support to ensure seamless operation within existing systems. Performance must adhere strictly to established combustion efficiency benchmarks and emissions standards, ensuring environmental and operational compliance across all deployed units. The work is subcontracted under the Department of Defense, managed by the Defense Logistics Agency, and falls under NAICS code 333618, which classifies it within the manufacturing of other commercial and service industry machinery. The contract is set to be executed with performance obligations tied to federal mandates, though specific delivery locations and contact details are not provided in the data. The posting date indicates this solicitation was made in July 2026, with the referenced award number pointing to an active procurement under the DIBBS system.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 333618
New
DIBBS
Airtronic Diesel Burner SupplyThe contract involves the supply of Airtronic diesel burners specifically designed for use in military field kitchen heating systems, ensuring reliable and efficient thermal performance in operational environments. These burners are critical components that support the preparation of hot meals under field conditions, contributing to troop readiness and sustainment. The contract is issued as a subcontract under the Department of Defense, with the Defense Logistics Agency serving as the overseeing organization, and is classified under NAICS code 333618, which pertains to other heating equipment manufacturing. The award is tied to the delivery order SPE3SE26F0798 under the master contract SPE3SE26D0003, and the work is intended to support defense operations without specified geographic limitations. The contract was posted on July 19, 2026, and is part of an ongoing effort to maintain and replenish essential logistics equipment for field kitchen units. There is no set-aside designation indicating the contract is reserved for small businesses or other specific categories, and no point of contact or place of performance details are provided. The delivery scope includes a quantity of 60 units, as referenced in the contract details. The supplier must meet strict military specifications for durability, fuel efficiency, and safety under harsh environmental conditions, and the burners are expected to function reliably without infrastructure support in forward-deployed locations.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 333618
New
DIBBS
Camshaft Manufacturing and Supply for DoD ApplicationThe contract entails the manufacturing, inspection, packaging, and delivery of a single camshaft identified by NSN 2815014780091, specifically engineered to meet military specifications for integration into Department of Defense engine systems. The work must be completed to exacting standards ensuring operational reliability under demanding conditions, with all processes including final inspection conducted in accordance with required defense protocols. The delivery term is FOB origin, meaning the contractor assumes responsibility for the item until it is loaded onto the transporting vehicle at their facility, after which risk and custody transfer to the government. Inspection of the camshaft will occur at the destination location to verify compliance with technical and quality requirements prior to acceptance. The solicitation is classified as a subcontract under NAICS code 333618, indicating involvement in other engine equipment manufacturing. It was posted on July 19, 2026, with a response deadline of July 30, 2026, and originates from the Land Supply Chain organization within the Department of Defense, with performance expected to be linked to Alameda, CA, 94501. Although no point of contact or set-aside details are provided, contractors must ensure full compliance with defense acquisition regulations and readiness to support military logistics timelines. All submissions must be made through the designated DIBBS platform to be considered valid.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
COVER, THERMOSTATICThe contract pertains to the procurement of eight thermostatic covers with NSN 2815014860463 under solicitation SPE7L1-26-T-848Z, with a total contract value of $64.000 at a unit price of $8.000 per item. Delivery is required within five days of the award date, with FOB origin terms designating the contractor’s shipping point as the point of title and risk transfer, and the final delivery destination being the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The item must conform to the DLA Master List of Technical and Quality Requirements referenced by RA001 and RP001, which govern packaging, preservation, and marking standards. Packaging must adhere to MIL-STD-2073-1E with a clean/dry preservation method, no additional preservation materials, and unit containers designated as E5 with intermediate containers labeled DO; palletization follows DLA’s RP001 guidelines. Labeling and marking must comply with MIL-STD-129, including mandatory UCC/ANSI 128 or GS1 DataBar barcode compliance, and no special markings beyond standard provisions are required. The product is strictly prohibited from containing intentionally added mercury or mercury compounds except for functional uses in batteries, sensors, or certain instruments as permitted under NAVSEA 5100-003D, requiring shock-proof construction and secondary containment for any portable mercury-containing devices. All supplies must be free of hexavalent chromium and comply with DFARS requirements for hazardous material identification, cybersecurity, and contractor information safeguarding, including adherence to NIST SP 800-171 and safeguarding covered defense information under 252.204-7012. The contract includes numerous FAR and DFARS clauses governing equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, cyber incident reporting, subcontracting, inspection, default, payment acceleration for small businesses, electronic invoicing via WAWF, and restrictions on acquisition of defense items from communist Chinese military companies. Inspection and acceptance occur at origin under FAR 52.246-2, with the government responsible for inspection. Contractors must hold a valid UEI and CAGE code and declare their size status, and any affirmative response regarding covered defense telecommunications equipment triggers additional disclosures. Submission is mandatory through the DLA Internet Bid Board System by July 3
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
MUFFLER, EXHAUSTThe contract pertains to the procurement of one exhaust muffler with NSN 2990-01-597-2881 and part number 60-0014, sourced from ISON EQUIPMENT CO INC SUPERIOR, under solicitation SPE7L1-26-T-852K. The item must be delivered within 20 days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly adhere to ASTM D3951 as modified by the DLA Master List of Technical and Quality Requirements, with all labeling and packaging in compliance with MIL-STD-129. Palletization must follow RP001 DLA Packaging Requirements, and the unit of issue is one each. The delivery address is the Naval Facilities Engineering and Expeditionary Warfare Center in Port Hueneme, CA, and shipment must be sent via the fastest traceable means—parcel post is prohibited. The required delivery date is July 13, 2026, and the contract references specific DLA technical standards that supersede any conflicting requirements. The point of contact is Kristina Derry, and the contract falls under NAICS code 333618 for the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
DEFLECTOR, DIRT AND LIQThe contract pertains to the procurement of deflectors for dirt and liquid, identified by NSN 2815-01-323-5942, with a total requirement of 16 units divided between two line items: nine units at $9.00 each and seven units at $7.00 each. Delivery is required within five days of shipment, with FOB origin terms, and all items must be delivered to the specified address at Fort Campbell, Kentucky. The products must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications including ASTM D3951, and packaging must adhere strictly to MIL-STD-129 labeling and RP001 palletization standards. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval. All shipments must be sent via the fastest traceable method, excluding parcel post, and must be marked with the designated military freight code and project identifiers. Inspection and acceptance occur at the destination, with zero variance allowed in quantity. The contract is issued under solicitation SPE7L1-26-T-850J with a required delivery date of July 16, 2026, and is governed by Department of Defense procurement protocols.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
ENGINE BLOCK ASSEMBThe contract is for the procurement of 10 diesel engine block assemblies under solicitation SPE7L5-26-T-4526, with a delivery deadline of 159 days after award, targeting a need ship date of January 6, 2027, and an original delivery date of January 9, 2027. The items are to be delivered FOB destination to Tinker Air Force Base, Oklahoma, with packaging and preservation strictly governed by MIL-STD-2073-1E and MIL-STD-2073-1D, requiring individual unit packaging with QUP=001, floating bags, desiccants, humidity indicators, and immobilization within containers to prevent transit damage. All packaging must comply with ASTM D4169 Distribution Cycle 18, Level II, Criterion 3, and include approved cushioning and blocking materials. Preservation must follow Method Code 53 (CLNG/DRY), ensuring corrosion prevention and excluding materials incompatible with operational fluids or excessively difficult to remove. Marking and labeling adhere to MIL-STD-129 and MIL-STD-129R, mandating serial number tracking on all container levels, special handling codes such as Arrow Up, Center of Balance, and Open for Inspection, and compliance with HazCom standards for hazardous materials. Barcoding is required for logistics tracking, and radioactive material labeling applies if activity exceeds specified thresholds. Technical data associated with the item is subject to ITAR or EAR export controls, restricted to contractors with approved JCP certification, completed DLA export training, and DLA authorization. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization, and configuration changes must be managed via formal engineering change proposals. The contractor must maintain a quality system certified to SAE AS9003 or tailored ISO 9001, with zero non-conformances required for acceptance. Inspection and acceptance occur at destination under FAR 52.246-2, and invoicing is exclusively through WAWF. The contract includes clauses on equal opportunity, combating trafficking, employment eligibility verification, safeguarding defense information, whistleblower protections, disclosure of information, and accelerated payments to small business subcontractors. The solicitation references socioeconomic program representations for small, HUBZone, WOSB, EDWOSB, and SDVOSB businesses, with mandatory Unique Entity ID and CAGE code submissions. The estimated contract value is approximately
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
MUFFLER, EXHAUSTThe contract specifies the procurement of one muffler, exhaust with NSN 2990-01-546-8453 and part number 04-19936-000 for Daimler Truck North America LLC under solicitation SPE7L1-26-T-851W. The requirement is for delivery within 20 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and, where applicable, take precedence from DLA’s Master List of Technical and Quality Requirements, with labeling and marking strictly following MIL-STD-129. Unit packaging and palletization adhere to RP001 DLA Packaging Requirements. The shipment is designated for delivery to Coastal Riverine Squadron Eleven Det Bangor in Silverdale, WA, and must be sent via fastest traceable means, explicitly excluding parcel post. A RDD 777 shipment designation and M/F number R570926188BH45 are provided, with the original required delivery date set for July 20, 2026. The contract references DLA procedural notes C19 and C20 for transportation and first destination handling. The contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
MANIFOLD, EXHAUSTThis contract specifies the procurement of one exhaust manifold with NSN 2815-01-735-9195 and part number Z026118-0 from STEYR MOTORS NORTH AMERICA, INC., under solicitation SPE7L1-26-T-852M. Delivery is required within five days of award, delivered FOB origin with zero tolerance for quantity variance, and inspection and acceptance will occur at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Palletization must adhere to DLA packaging standards, and the unit of issue is each. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. Transportation must follow DLA procedure notes C19 and C20, using the fastest traceable means—parcel post is prohibited. The item is destined for DDG 125 USS JACK H. LUCAS in San Diego, with shipment coordinated via RDD 999/NMCS and VSM for vendor use. The original required delivery date is July 16, 2026, and the contract was posted on July 19, 2026, with a response deadline of July 30, 2026. The NAICS code is 333618, and the responsible contracting office is under the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 484220
New
DIBBS
Logistics and Delivery to DLA Distribution SitesThe contract entails the transportation of hazardous battery shipments to DLA distribution centers, requiring strict adherence to safety and regulatory standards for handling dangerous goods. All movements must be supported by compliant documentation and executed through the WAWF invoicing system to ensure full financial and logistics accountability. The work is scoped for delivery to the designated performance location in Tracy, CA, with the NAICS code 484220 indicating a focus on truck transportation of hazardous materials. As a subcontract, this opportunity is open to qualified vendors who can meet the Department of Defense’s operational and compliance requirements, with proposals due by July 30, 2026. The contracting activity falls under DLA San Joaquin, a unit of the Department of Defense responsible for logistics and supply chain support across military installations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541330
New
DIBBS
Shelf-Life Management and Inspection ServicesThe contract requires comprehensive shelf-life management and inspection services with strict zero tolerance for non-conformance, ensuring all incoming and outgoing materials undergo rigorous verification to confirm compliance with established lifecycle standards. All processes must include full documentation that is audit-ready, demonstrating traceability, accuracy, and adherence to quality protocols throughout the supply chain. The work involves systematic checks to validate expiration dates, storage conditions, and product integrity prior to release or distribution, with an emphasis on preventing the use or movement of expired or degraded items. Performance is to be executed at the Tracy, California location with a 95304-5000 zip code, and the contract is classified as a subcontract under NAICS code 541330 for scientific and technical consulting services. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026. The awarding agency is the Department of Defense through DLA Dist San Joaquin, and contractors must be prepared to support defense logistics with uncompromising quality controls and complete transparency in recordkeeping to meet federal audit requirements.
Engineering Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 561990
New
DIBBS
Hazardous Materials Packaging and LabelingThe contract requires specialized packaging, labeling, and documentation for AGM batteries classified as hazardous materials, adhering strictly to military and federal regulatory standards. The work must ensure safe handling, transportation, and compliance with all applicable hazardous materials regulations, including proper markings, placarding, and accompanying paperwork to meet Department of Defense and DOT requirements. The placement of performance is in Tracy, California, with a zip code of 95304-5000, indicating the physical location where services will be rendered or materials delivered. This is a subcontract opportunity under NAICS code 561990, which covers other support activities for transportation, and it is administered by the DLA Dist San Joaquin under the Department of Defense. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, leaving a narrow window for interested parties to submit proposals. The focus is on precision in compliance, safety, and adherence to government-mandated protocols for hazardous material logistics, with no set-aside designation specified, meaning all eligible contractors may compete.
All Other Support Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335911
New
DIBBS
Supply of AGM Jump Start BatteriesThe contract requires the manufacture or commercial supply of AGM jump start batteries compliant with NSN 6130016180951, ensuring full adherence to Defense Logistics Agency standards. The batteries must maintain a minimum 24-month shelf life under specified storage conditions and meet all technical, quality, and documentation requirements mandated by the Department of Defense. Performance and delivery are to be executed at the designated location in Tracy, California, with the zip code 95304-5000 serving as the primary place of performance. The contract is structured as a subcontract under NAICS code 335911, which classifies it within the battery manufacturing sector. All proposals must be submitted by the response deadline of July 30, 2026, with the solicitation posted on July 19, 2026. The contracting activity is managed by DLA Dist San Joaquin, operating under the broader authority of the Department of Defense. There is no set-aside designation, meaning the contract is open to all qualified suppliers without preference based on business size or owner demographics. Interested parties must access the official solicitation portal via the provided DIBBS link to obtain complete technical specifications, submission guidelines, and compliance documentation necessary for participation.
Storage Battery Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Freight Logistics (FOB Origin to Tracy, CA)The contract requires the transportation of a packaged valve from its origin to the Defense Logistics Agency warehouse in Tracy, California, under FOB Origin terms, meaning the buyer assumes responsibility for the shipment once it leaves the origin point. The delivery must be completed no later than October 5, 2026, ensuring timely fulfillment of the logistical requirement. The NAICS code 484220 designates this as a freight transportation arrangement, specifically for trucking services, indicating that ground transport is the expected mode of delivery. The contracting agency is the DLA Dist San Joaquin under the Department of Defense, with the place of performance clearly identified as Tracy, CA, with ZIP code 95304-5000. This is a subcontract opportunity with a response deadline of July 30, 2026, and the solicitation was posted on July 19, 2026, allowing potential vendors a limited window to prepare and submit their bids.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 811411
New
DIBBS
Military-Compliant Marking, Labeling, and Bar-CodingThe contract requires full compliance with MIL-STD-129 for the marking and barcoding of military equipment and supplies, ensuring standardized identification for logistics and inventory tracking across the Department of Defense supply chain. All labels must include accurate, legible barcodes and descriptive information as mandated by the standard, and hazardous materials must be labeled in strict accordance with OSHA's Hazard Communication standards, including proper hazard classification, pictograms, and safety data sheet alignment. If radioactive materials are involved, additional regulatory labeling requirements must be met. The work is to be performed at the designated location in Tracy, California, with a zip code of 95304-5000. The solicitation is classified as a subcontract under NAICS code 811411, with a response deadline of July 30, 2026, and was posted on July 19, 2026, by DLA Dist San Joaquin under the Department of Defense.
Home and Garden Equipment Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of military-compliant packaging and preservation services adhering to MIL-STD-2073-1E standards, ensuring items are protected through air evacuation, dry climate control, enclosed containerization, and jute cloth cushioning to meet rigorous defense requirements. All packaging must be palletized in accordance with DLA RP001 specifications to ensure safe handling, transport, and storage. The work is to be performed at the designated place of performance in Tracy, California, with a zip code of 95304-5000. This subcontract opportunity, issued under NAICS code 493190 by the Department of Defense through DLA Dist San Joaquin, is open for responses until July 30, 2026, with a solicitation posted on July 19, 2026. All parties must comply fully with the technical and procedural requirements outlined to fulfill the terms of this defense-related packaging obligation.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
Supply of 3-Inch Check Valve with Flanged Ends and Position IndicatorThe contract solicits the supply of a single 3-inch check valve featuring flanged ends and a built-in position indicator, designed to operate at a maximum pressure rating of 300 PSI. The valve must strictly comply with Griswold part number specifications and adhere to NAVSEA mercury restrictions, ensuring environmental and safety compliance for naval applications. Delivery is required to the place of performance in Tracy, California, with a ZIP code of 95304-5000, under a subcontract arrangement managed by DLA Dist San Joaquin, a branch of the Department of Defense. The procurement falls under NAICS code 332911, indicating it pertains to other fabricated metal product manufacturing. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026, and all submissions must align with the technical and regulatory requirements outlined in the contract.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Safety Data SupportThe contract requires comprehensive hazardous materials compliance and safety data support for valve components, with a primary focus on verifying the absence of mercury and other prohibited substances such as hexavalent chromium. Providers must deliver accurate Safety Data Sheets (SDS) and detailed hazardous material declarations that align with regulatory standards, ensuring that all components meet strict environmental and safety requirements throughout the supply chain. The work is critical to maintaining compliance with federal mandates and supporting the safe handling, use, and disposal of defense-related equipment. This subcontract is issued by the Department of Defense through DLA Dist San Joaquin, with performance obligations centered in Tracy, California, at the zip code 95304-5000. The solicitation, posted on July 19, 2026, requires responses to be submitted by July 30, 2026, under the NAICS code 541620, indicating environmental consulting and related services. Participation is expected from entities capable of providing technical documentation and verification processes that confirm adherence to restricted substance regulations, ensuring the integrity and legality of valve components used in defense systems.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of packaging, preservation, and labeling services for valves in full compliance with military standards, specifically for shipment by the Defense Logistics Agency. All items must be labeled with 2D Data Matrix barcodes and include appropriate hazardous materials labeling to ensure regulatory compliance. The work must be performed to meet the stringent requirements set by the Department of Defense for logistics and supply chain integrity. Performance of this subcontract is designated to occur in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026. The contract falls under NAICS code 561910, which pertains to other support activities for transportation. The agency responsible is DLA Dist San Joaquin under the Department of Defense, and all activities must align with the technical and procedural mandates required for military logistics operations.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
Precision Valve Manufacturing and SupplyThe contract requires the manufacture and delivery of eleven poppet-type disk valves identified by NSN 4820012924298, all of which must fully comply with applicable military specifications. Compliance includes stringent requirements for traceability of materials and components, adherence to quality assurance protocols, and strict control of hazardous materials throughout the production process. The valves are to be produced under a subcontract arrangement with a response deadline of July 30, 2026, following a solicitation posted on July 19, 2026. The work is assigned to NAICS code 332913, which classifies it under Other Metal Valve and Pipe Fitting Manufacturing, and the place of performance is set at Tracy, California, with a ZIP code of 95304-5000. The contracting activity is managed by the DLA Dist San Joaquin under the Department of Defense, indicating the critical nature of the valves for defense applications.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and NIST SP 800-171 ImplementationThe contract requires the implementation and thorough documentation of NIST SP 800-171 security controls across systems that handle covered defense information, ensuring compliance with federal cybersecurity standards for protected data. This includes configuring technical, administrative, and physical safeguards aligned with the framework to protect sensitive information from unauthorized access, disclosure, or compromise. The contractor must conduct a formal assessment of these controls, validate their effectiveness, and submit the assessment results to the Department of Defense Supplier Performance Risk System to demonstrate compliance and maintain eligibility for defense-related work. Performance is mandated at a designated location in Tracy, California, with a zip code of 95304-5000, and the work scope falls under NAICS code 541512, indicating it pertains to computer systems design services. The contract is structured as a subcontract, with a response deadline of July 30, 2026, and was posted on July 19, 2026. The contracting activity is under the Defense Logistics Agency San Joaquin, operating within the Department of Defense, emphasizing the critical nature of cybersecurity readiness for defense supply chain partners. Failure to meet requirements or submit accurate assessment data may result in loss of contract eligibility or penalties.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details