Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on May 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

SECURITY PROGRAM AND COMPLIANCE SUPPORT SERVICES FOR THE PROTECTION OF PERSONNEL, INFORMATION, AND ASSETS

Closed
N0016426SNB59_0001Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
SLED
RFP/RFQ - On-Call Engineering Services for Torrington Transfer Station/NRRA
Solicitation # EDC 11- 2026 -01
The Northwest Hills Council of Governments (NHCOG) is soliciting proposals under solicitation number EDC 11- 2026 -01 for on-call engineering services to support the Torrington Transfer Station and the Northwest Resource Recovery Authority (NRRA). The agency seeks a qualified firm specializing in Municipal Solid Waste and Recycling Transfer Stations to provide technical analysis, facility and operational capacity assessments, site planning, and permitting assistance. These services are intended to support ongoing operations and inform the NRRA Strategic Plan and future capital investment decisions, ensuring compliance with CT DEEP General Permits. Interested firms must submit their proposals by November 30, 2026, at 11:00 AM. Submissions must include a project management plan, key personnel resumes limited to two pages, three relevant references, a technical approach, and a detailed project timeline. A fee proposal containing hourly rates or lump sum allocations must be submitted in a separate sealed envelope. Evaluation will be based on personnel qualifications, experience with multiuse trails and waste facility planning, the proposed project approach, and the fee schedule. Awardees must provide proof of workers compensation, liability, and vehicle insurance, including a waiver of subrogation and naming the State of Connecticut and NHCOG as additional insureds within ten days of the award. Required documentation also includes a Non-Collusion Affidavit and certifications of non-discrimination.
DAS Procurement

POSTED

about 12 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

The Naval Surface Warfare Center Crane Division is conducting market research through a Sources Sought/Request for Information (RFI) under amendment N0016426SNB59 Amendment 0001 to assess the availability and technical capabilities of SeaPort-NxG MAC holders—including both large and small businesses—to provide comprehensive Security Program and Compliance Support Services. This effort supports the Crane Security Services division and encompasses 13 distinct Task Areas covering information security, personnel security, physical security, industrial security, communications security, operations security, insider threat mitigation, emergency management, visitor and access control, and specialized support for the Special Security Office and sensitive intelligence-related contracting. The requirement is structured as a potential Cost-Plus-Fixed-Fee, Level of Effort contract with a one-year base and up to four option years, with an estimated total labor effort of 1,014,809 base hours annually, plus a 10% surge capacity, equating to approximately 106 FTEs per year. All services must be performed on-site at NSWC Crane, Indiana, with the sole exception of the Program Manager, who must reside within a 50-mile radius. The North American Industry Classification System code is 541330 (Engineering Services), with associated Product Service Codes R425 and R408 for professional engineering and program management support. Respondents must submit detailed capability statements addressing each Task Area, with particular emphasis on Task Area 7 (Physical Security), which has been further subdivided into General Physical Security, Lock Shop, Alarm Response Center, and Electronic Security System components. To be considered for potential small business set-asides, small business primes must demonstrate they can perform more than 50% of the work as the small business concern. All personnel must be U.S. citizens holding TOP SECRET clearances with eligibility for Sensitive Compartmented Information access; the contractor must maintain a TOP SECRET/SCI facility clearance, though no safeguarding of classified material at the contractor site is required per DD-254. Compliance with DFARS 252.239-7001, NIST SP 800-171, and SECNAV M-5239.2* is mandatory, and cybersecurity workforce certification requirements apply to all personnel performing IT or cybersecurity functions. Responses must be submitted electronically by May 26, 2026, to two designated Navy points of contact in Microsoft Office

General Info

NSWC Crane seeks Security Program support services with 1-year base, 4 option years, strict clearance.

NAICS

541330 - Engineering Services

Place of Performance

Crane, IN, 47522, USA

Set-Aside

NONE

Documents

4

A5_SOW-PWS-SOO_05.08.2026+DRAFT+FOR+POSTING.pdf

PDF

SOW+Labor+Mapping_05.08.2026.pdf

PDF

TASK+AREA+TABLE+1.pdf

PDF

TASK+AREA+TABLE+2.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseClosed
Posted

Sources Sought

Notice updated

The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Crane
Contacts2 people available
OfficeCRANE, IN, 47522-5001, USA
Office AddressCRANE, IN, 47522-5001, USA
Contacts
Heather Krout
Heather Howard

Full Description

Show more

N0016426SNB59 Amendment 0001


SOURCES SOUGHT/ REQUEST FOR INFORMATION (RFI) – SEAPORT ACTION


SECURITY PROGRAM AND COMPLIANCE SUPPORT SERVICES FOR THE PROTECTION OF PERSONNEL, INFORMATION, AND ASSETS


PSC R425/R408, NAICS 541330


AMS PID Number: N00164-25-RFPREQ-CR-105-0001


POST DATE: 11 MAY 2026, CLOSE DATE: 26 MAY 2026


INFORMATIONAL PURPOSE ONLY. Naval Surface Warfare Center (NSWC), Crane Division Contracting Department, Crane, IN, requests information from SeaPort-NxG MAC holders (Prime/Subcontractors) in reference to the attached Statement of Work (SOW) for planning and market research purposes.


This effort is in support of the Crane Security Services (Code 105) at NSWC Crane for non-personal professional support services including information security, personnel security, physical security, industrial security, communications security, operations security, and other supporting disciplines for the Security Division. This Task Order (TO) will support organizations and projects base-wide and will be pertinent to the Corporate Operations Department and its customers.


Requirements consist of the following task areas (TAs):


  • TA1: SECURITY FUNCTIONAL & COMPLIANCE SUPPORT
  • TA2: INFORMATION SECURITY (INFOSEC) SUPPORT
  • TA3: PERSONNEL SECURITY (PERSEC) SUPPORT
  • TA4: SECURITY EDUCATION, TRAINING, AND AWARENESS (SETA) SUPPORT
  • TA5: INDUSTRIAL SECURITY (INDUSEC) SUPPORT
  • TA6: INSIDER THREAT SUPPORT
  • TA7: PHYSICAL SECURITY (PHYSEC) SUPPORT
  • TA8: EMERGENCY MANAGEMENT SUPPORT
  • TA9: COMMUNICATIONS SECURITY (COMSEC) SUPPORT
  • TA10: SPECIAL SECURITY OFFICE (SSO) SUPPORT
  • TA11: SENSITIVE ACTIVITY & INTELLIGENCE-RELATED CONTRACTING SUPPORT
  • TA12: OPERATIONS SECURITY (OPSEC) SUPPORT
  • TA13: VISITOR AND ACCESS CONTROL SUPPORT, SECURITY COORDINATOR, AND SECURITY RESPOSE TEAM SUPPORT SERVICES

OPEN TO ALL CAPABLE SeaPort-NxG MAC HOLDERS, BOTH LARGE AND SMALL


The purposes of the Sources Sought/RFI amendment is to determine the availability and technical capability to provide the required services for each Task Area(s) which will determine the potential to set-aside all or some of the task areas for small business. The SOW has been updated to further specify the requirements for TA7 into four areas (General Physical Security, Lock Shop, Alarm Response Center (ARC), and Electronic Security System (ESS). Both Large and Small capable businesses should respond as this market research will be utilized to determine the contract strategy across all tasking areas.


The North American Industry Classification System (NAICS) Code identified for this requirement is 541330, Engineering Services. The Product Service Code (PSC) is:


  • R425-Support-Professional: Engineering/Technical
  • R408-Support-Professional: Program Management/Support

This notice is not a request for proposals and is not to be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. Responses will not be considered as proposals and no award will be made as a result of this notice.  The Government is not obligated to and will not pay for information received in response to this notice. Sources choosing to respond to this notice are wholly responsible for any costs/expenses associated with submitting a response. Respondents will not be notified of the results of this sources sought notice. The information obtained from submitted responses may be used in development of an acquisition strategy and future solicitation. When/if the Government issues an RFP, interested parties will be expected to thoroughly address the requirements thereof regardless of the circumstances surrounding this sources sought.


Services associated with this requirement are currently being procured via a portion of the following two task orders:


This is a direct follow on to:


Contract Number – N0017819D8321/N0016421F3015


Contractor - Precise Systems, Inc.


In addition, the Lock Shop and Electronic Security Systems (on-base) tasking included is currently being procured via:


Contract Number - N0017819D8470/N0016422F3002


Contractor – Science Applications International Corporation (SAIC)


Required Capabilities:


NSWC Crane is considering one, Cost-Plus-Fixed-Fee (CPFF), Level of Effort (LOE) type contract(s) with a one-year base and four (4) option years. In response to this Sources Sought, companies shall provide written capability statements that demonstrate their ability to successfully perform the required services for each Task Area. In order for the Government to consider setting aside any of the potential task areas, Small Business Primes, along with similar situated subcontractors, must show that they can perform more than 50% of the effort as the small business concern.  The total LOE is estimated at 106 FTEs per year or 1,014,809 hours plus 10% surge labor hours for the life of the contract. A summary of the labor mix is provided as an attachment. Also included is the overall percentage estimated of labor hours by Task Area.


Per the SOW, Paragraph 6.1, Place of Performance: All personnel are on Government site with the exception of the Program Manager. The Program Manager shall be within a 50-mile radius of NSWC Crane due to all personnel located at NSWC Crane.


Interested vendors shall complete the Task Area Tables attached and provide with their capability submission. The vendors shall use the “Experience with Tasking” column to further explain how they can meet the Level-of-Effort/Full-Time Employee (LOE/FTE) requirement for each Task Area and provide any previous contract references that are relevant that would be similar in scope and complexity. If there are subparagraphs within a Task Area that the vendor does not have the capability to meet, details should be provided in the Comments column. TA7 shall be filled out in further detail according to each of the TA7 Sections, see Table 2 attached.


For TA7, PHYSEC, the updated SOW (attached) sections out tasking for General Physical Security, Lock Shop, ARC, and ESS. Please address each section separately.


SECURITY REQUIRMENTS:


This Task Order will have security requirements for eligibility. In accordance with DFARS 252.239-7001, Information Assurance Contracting Training and Certification herein and SECNAV M-5239.2* dated June 2016, all personnel performing Cyber IT/Cybersecurity functions must be training and qualified.  In addition, personnel shall maintain the appropriate security clearance per SECNAV M-5510.30 to perform the tasks associated with their assigned positions.


The Contractor is required to maintain a TOP SECRET – SCI Facility Security Clearance level.  There is no safeguarding requirement for classified information/material in accordance with the DD-254. 


Responses:


Respondents should submit responses in electronic format either Microsoft Office Suite 365 or later compatible and/or Adobe 25.x or later compatible formats. The purpose of the sources sought is to identify all potential SeaPort-NxG sources to be capable of performing the resultant Task Order(s) via a fair consideration/opportunity limited to all SeaPort-NxG MAC holders (Prime/Subcontract). Therefore, only responses from SeaPort-NxG MAC holders will be considered as part of the market research.


Responses must:


  • Reference N0016426SNB59 Amendment 0001.
  • Be provided electronically only to Heather Krout @ email: contact@example.gov and Heather Howard @ email: contact@example.gov no later than 26 May 2026. It should be noted that telephone replies will not be accepted.
  • Include the name, position, telephone number, and e-mail address of the Industry Point of Contact (POC) for technical and contractual issues.
  • Be typed in Times New Roman font with 12-point type size and not exceed 10 pages. Task Area Tables 1 & 2 do not count against the 10 page limit. 
  • A page is considered as one side of a sheet 8 ½ inches by 11 inches.
  • Include the business size status of the prime and all anticipated team members.
  • MAC Contract Number.
  • Proprietary information, if any, must be clearly marked. To aid the Government in its review and evaluation, please segregate proprietary information. Classified material SHALL NOT be submitted.

  • Contractors are encouraged to submit requests for clarification of the tasking outlined that may not be clearly understood. ALL questions regarding this announcement shall be submitted in writing via e-mail to the Contract Specialist’s email address. Verbal questions will not be accepted. Questions shall not contain classified information.


ATTACHMENTS:


  • Draft SOW
  • Labor Mix Summary
  • TASK AREA TABLE 1
  • TASK AREA TABLE 2

More opportunities from Department Of Defense → Nswc Crane

Same awarding agency

NAICS: 336510
New
Federal
N0016426RGW20-PROCUREMENT OF DESIGN AND PRODUCTION OF FLAT RAILCARS-PSC 2220- NAICS 336510
Solicitation # N0016426RGW20
Solicitation N0016426RGW20 is an IDIQ contract issued by the NSWC Crane Warfare Center for the design and production of NSWC AIM Flatcars. The project involves the development and manufacture of a maximum quantity of nine railcars that must be fully commissioned and approved for use by the AAR. Key technical specifications include a lightweight car requirement of 116,000 pounds, truck axle loads not exceeding 60,000 pounds per axle, and adherence to AAR-M1001 Section C, Part II. The scope also incorporates specific load securement standards from WS20972 and MIL-SPC-810, and utilizes the Trident II AIM Flatcar / SSE Interface Drawing 5681514. The period of performance is structured over five years from the date of award. Delivery is required for three Strategic Weapons Facility locations, with risk handled under FOB terms. Evaluation criteria include a comparative analysis of delivery pricing for the three shipping locations and an assessment of past performance on non-federal government contracts related to rail car design and manufacture. Following several amendments to update the Statement of Work, revise requirement documents, and provide answers to offeror questions, the final closing date for proposal receipt was extended to November 25, 2026, at 2:00 PM EST. The primary point of contact for this procurement is Steven Junkins.
Railroad Rolling Stock Manufacturing

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 332812
New
Federal
SOLE SOURCE PAINT TRAINING
Solicitation # N0016427Q0007
Solicitation N00164-27-Q-0007 is a sole source procurement issued by NSWC Crane under FAR Part 12 for specialized paint application training for NGJ-MB Forward Radome systems. The government intends to award this contract to General Dynamics Mission Systems (CAGE: 04DG4) as the items are peculiar to one manufacturer. The objective is to establish a NavAir Depot Repair capability by providing NSWC Crane and NavAir personnel with 4 to 5 days of training at the GDMS Marion facility. This training will cover the full production painting process, including surface preparation, conductive primer application, base coat and top coat application, and final inspection. As part of the requirements, the supplier must provide one scrap NGJ-MB Forward Radome shell from LRIP 3 production for training purposes and provide detailed documentation of all materials used, including part numbers, brands, and expiration dates. The contract is a firm fixed price arrangement with a performance period of two weeks from the date of award receipt. Payment and invoicing will be processed electronically through the Wide Area Workflow system. The solicitation closed on November 2, 2026, and requires the contractor to maintain registration in the System for Award Management and comply with CMMC cybersecurity level requirements.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

1 day ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS