Security System Design and Integration II (SSDI II)

1. Introduction/Purpose This announcement is for informational purposes only. No response to this PUBLIC ANNOUNCEMENT is required. The purpose of this announcement is to provide interested parties with planned milestones associated with the acquisition. This is not a Screening Information Request or a Request for Proposals of any kind. The FAA is not seeking or accepting unsolicited proposals. If a solicitation is issued, it will be announced on the FAA’s Contract Opportunities web page. It is your responsibility to monitor the site for the release of a solicitation. 2. Preliminary Acquisition Dates The below dates are preliminary milestones and are subject to change without notice. RELEASE DRAFT SIR FOR COMMENTS JULY 2017 INDUSTRY DAY AUGUST 2017 RELEASE SIR NOVEMBER 2017 CONTRACT AWARD MARCH 2018 3. Requirement The FAA has a requirement to perform the complete technical refresh of security systems at staffed facilities.Technical Refresh can vary from the replacement of fully integrated Physical Access Control System (PACS), Surveillance System, and Perimeter Intrusion Detection System, to replacing intercoms and door hardware. Access control systems must meet Homeland Security Presidential Directive-12 (HSPD-12) and National Institute of Standards and Technology (NIST) Federal Information Processing Standards (FIPS) requirements and be on the General Services Administration (GSA) approved parts list. Access control devices for small facilities will be networked to shared security servers. All facilities must be able to be remotely monitored by the FAA’s Physical Security Enterprise Management System (PSEMS) which can manage alarms, alarm video, and Personal Identity Verification (PIV) cardholder access. The FAA’s current PSEMS includes Kaplogic (Aegis 3), TI (Entrypoint), JCI (P2000), and Pelco subsystems. The prospective company must provide a Commercial-Off-the-Shelf PACS, as well as design, integration, procurement, installation, documentation, and testing and training for the integrated system and each system, subsystem, or component. There are approximately 1,100 staffed facilities that will require some level of technical refresh during the contract period of performance. The anticipated period of performance is a total of ten years, including a 2-year base and four 2-year options. 4. Incumbent Contractor This is a follow-on contract to the Security Systems Design and Integration Contract (DTFAWA-08-D-00010) held by Versar Security Systems, LLC, located in Springfield, Virginia.. If you're viewing this announcement from a source other than Federal Aviation Administration Contract Opportunities (FAACO), visit https://faaco.faa.gov/index.cfm/announcement/view/27569 to view the original announcement.