This Government Contract opportunity from Department Of Energy was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Seismic Qualification and Testing Services

Closed

Federal

Submission Closed07/28/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Federal

First Article Testing and Inspection (NDT)This subcontract, issued by the Department of Defense through DLA Mechanicsburg, involves performing non-destructive First Article Testing and inspection for prime contractors. The scope of work requires conducting NDT on a single sample unit utilizing methods such as X-ray, ultrasonic, dye penetrant, or magnetic particle inspection. The selected provider must develop and submit test procedures in accordance with the Contract Data Requirements List. To qualify, personnel must hold ASNT Level II or III certification. The final deliverables for this engagement include the approved test procedures and a comprehensive First Article Test/Inspection report. The solicitation was posted on October 19, 2026, with a response deadline of November 16, 2026, under NAICS code 541380.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Hardware Inspection and Quality ValidationThe Hardware Inspection and Quality Validation subcontract, issued by the Department of Defense through DLA Mechanicsburg, involves providing independent inspection and quality assurance testing for prime contractors. The selected provider will perform technical acceptability testing for detector accuracy using specialized calibration tools and testing rigs. Key deliverables include the submission of detailed inspection reports and formal certifications of technical acceptability. To qualify, contractors must hold recognized quality certifications such as ISO 9001 or AS9100 and are required to maintain all inspection records for 365 calendar days following delivery. This opportunity falls under NAICS code 541380, with a response deadline set for November 6, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Third-Party Inspection and Certification

POSTED

DEADLINE

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation (MTC) is soliciting quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material (ACM) floor tiles in the Warehouse, Warehouse Storage Area, and Gymnasium. Specifically, the project may require the removal and disposal of approximately 2,000 square feet in the warehouse, 1,600 square feet in the storage area, and 600 square feet in the gymnasium. All work must be performed by contractors possessing all required State of Illinois licenses and certifications, utilizing accredited laboratories, and adhering to federal, state, OSHA, and EPA regulations. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. To be considered for the best-value award, offerors must submit a completed bid sheet, supplier packet including a W-9 and self-certification form, proof of insurance, and three professional references by October 21, 2026. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Revision 31, and includes various FAR clauses regarding equal opportunity, small business utilization, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis to MTC.

POSTED

DEADLINE

Asbestos Surveying, Air Monitoring, and Laboratory AnalysisThis subcontract agreement establishes a partnership with Home Group to provide specialized asbestos identification and monitoring services across various domestic and commercial housing projects. The scope of work includes conducting management, refurbishment, demolition, and re-inspection surveys to locate asbestos-containing materials, as well as performing air monitoring and laboratory analysis through accredited facilities. All activities must be executed in strict compliance with HSG264 standards to ensure safety and regulatory adherence. The service provider is responsible for delivering comprehensive survey reports, official air monitoring certificates, and detailed laboratory analysis results to the prime contractors.

POSTED

DEADLINE

First Article Testing (FAT) and Quality ComplianceThis subcontract, titled First Article Testing (FAT) and Quality Compliance, involves providing technical testing and reporting services for prime contractors under DLA supply contracts. The scope of work requires the testing of five initial Objective Flip Cover units to ensure full compliance with DLA Master List specifications and source-controlled drawings. These evaluations must be conducted using specialized testing equipment to verify quality and technical standards. The primary deliverable is a formal First Article Test report, which must be generated and submitted within 90 days of the contract award. This project is managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, with the place of performance located in New Cumberland.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, focuses on First Article Testing and Quality Validation. The selected provider will perform critical quality assurance services for prime contractors on DLA supply contracts, specifically conducting dimensional inspections via CMM metrology and material verification within testing laboratories. Additional responsibilities include the verification of manufacturing process sheets and the provision of quality assurance surveillance for sub-venders. To ensure compliance with aerospace industry requirements, the contractor must adhere to AS9100 or equivalent quality standards. The primary deliverables for this engagement are the First Article Testing Report and a comprehensive Quality Certification package. Performance for this contract is centered at Tinker AFB, and the response deadline for the solicitation is October 26, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test services supports prime contractors under the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The scope of work involves performing First Article Testing to validate initial production units, ensuring they meet strict dimensional requirements of 0.170 thickness, 0.380 height, and 0.435 width. Additionally, the contractor must verify material integrity to ensure no splicing or gluing has occurred, utilizing precision measurement tools and material analysis equipment to confirm compliance. The project is categorized under NAICS code 541380 and will be performed in Tracy, California. The primary deliverables include a comprehensive First Article Test report and a formal certification confirming that all units adhere to the Statement of Work. Interested parties should note the response deadline of October 29, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Quality Inspection and Sampling Services for Critical Aerospace ComponentsThis subcontract for Quality Inspection and Sampling Services for Critical Aerospace Components supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for performing zero-based sampling and quality inspections for prime contractors on aerospace procurements, specifically focusing on turbine engine components. The scope of work includes executing sampling plans according to MIL-STD-1916 or ASQ H1331 to ensure part authenticity and strict compliance with Boeing specifications for critical application items. The service provider will utilize precision measurement tools to verify components and is required to deliver detailed inspection reports and sampling certifications. Performance for this contract takes place in New Cumberland, Pennsylvania. The solicitation was posted on October 18, 2026, with a response deadline of October 26, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

First Article Testing and Validation for Electrical AssembliesThis subcontract involves performing specialized first article testing and validation for electrical assemblies on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work focuses on executing validation tests for NSN 5995-01-676-1147 in accordance with RT001 standards and specific technical data. The selected provider must coordinate closely with Government Quality Assurance Representatives for in-process verification and is required to deliver a formal written First Article Test Report upon completion. To be eligible, contractors must hold JCP certification for handling ITAR and EAR data and maintain certification in either SAE AS9003 or ISO 9001. The work is designated under NAICS code 541380 and will be performed in Tracy, California. Interested parties must submit their responses by October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Test (FAT) EvaluationThis subcontract, issued by the Department of Defense via Depot Hill, requires the performance of First Article Testing for a solenoid valve with NSN 4810-01-044-9244. The selected contractor will utilize laboratory equipment to verify the performance and tolerances of the first production unit, ensuring it meets all necessary specifications. This process involves close coordination with the Engineering Support Activity for final approval and culminates in the delivery of a validated sample unit and a comprehensive FAT report. The project is based at Hill AFB and falls under NAICS code 541380. Due to the handling of Controlled Unclassified Information, the contractor must maintain CMMC Level 2 certification. Interested parties must respond by October 29, 2026.

POSTED

DEADLINE

Production Lot Testing (PLT) ServicesThis subcontract for Production Lot Testing services is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The selected provider will perform quality conformance validation for prime contractors on Defense Logistics Agency supply contracts, specifically focusing on the execution of Production Lot Tests. This work involves using electrical testing equipment, such as signal analyzers and multimeters, to verify NSN part number accuracy, signal integrity, and serial cable continuity in accordance with established DLA quality assurance standards. The scope of work culminates in the delivery of a formal certification of quality conformance or a detailed test report. Performance for this contract is located in Tracy, California, under NAICS code 541380. Interested parties must note the response deadline of October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

in 7 days

AI Contract Overview

The Department of Energy, specifically the Western Upper Great Plains Region, is seeking a subcontractor to provide independent engineering validation and testing services. The primary objective of this contract is to certify that a power circuit breaker complies with IEEE 693-2018 High-Level Seismic Qualification standards. To achieve this certification, the selected provider must perform comprehensive shake table testing and finite element analysis. This opportunity is designated as an SBA set-aside under NAICS code 541380. The solicitation was posted on July 14, 2026, with a response deadline set for July 28, 2026. Interested parties can find further details through the provided FedConnect portal.

General Info

DOE seeks subcontractor for seismic qualification testing and analysis of power circuit breakers.

Agency

Department Of Energy → Western Upper Great Plains Region

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Not specified

Set-Aside

SBA

Documents

This scope was carved out of 89503426QWA001299.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SPARE AND GRANITE FALLS 38 KV BREAKERS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 14

subcontract

Response DeadlineJul 28

Deadline has passed

Submission Closed

07/28/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Energy → Western Upper Great Plains Region

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Energy → Western Upper Great Plains Region

Office AddressN/A

ContactsNo contact information available

Full Description

Independent engineering validation and testing to certify that the power circuit breaker meets IEEE 693-2018 High-Level Seismic Qualification standards, including shake table testing and finite element analysis.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS