Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Seismic Safety Compliance (Construction-Related Modifications)

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

All structural or construction-related modifications to parts infrastructure under this subcontract must adhere to California’s seismic safety standards as mandated by 49 CFR Part 41, ensuring that all work meets rigorous earthquake resilience requirements. The contract is issued by the Procurement Department of OmniTrans under the state of California and is classified under NAICS code 238910, indicating it pertains to other heavy and civil engineering construction activities. The solicitation was posted on July 24, 2026, with a firm deadline for responses set for July 28, 2026, at 10:00 PM Pacific Time. This is a subcontract opportunity without a specific set-aside designation, meaning it is open to all qualified contractors regardless of size or status. The place of performance and exact office address are not specified, but the work is tied to infrastructure within California. Bidders must review the full details via the provided vendor portal link to ensure compliance with all technical, safety, and procedural obligations.

General Info

California seismic standards required for civil construction subcontract under OmniTrans, open to all bidders, deadline July 28, 2026.

Agency

California → Procurement Department of OmniTransView Agency

NAICS

238910 - Site Preparation ContractorsView NAICS

Place of Performance

CA, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyCalifornia → Procurement Department of OmniTrans
ContactsNo contacts available
OfficeN/A
Organization / Agency
California → Procurement Department of OmniTrans
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Structural or construction modifications related to parts infrastructure must comply with California seismic safety standards under 49 CFR Part 41.

Similar Contracts

Same NAICS industry code

NAICS: 238910
New
SLED
SSC - Northwest Victoria Demolition - Victoria, TX, Northwest Phase 2, #0236The Texas A&M University System is soliciting competitive sealed proposals for the demolition, salvage of designated materials, and removal of debris at Northwest Victoria in Victoria, Texas, under solicitation number SSC-CSP-2026-06933. This project, designated as Northwest Phase 2, requires capable contractors to handle all aspects of site clearance including the safe dismantling of structures, recovery and salvage of usable items, and proper disposal of residual waste. The solicitation was posted on July 24, 2026, with proposals due by August 26, 2026, at 8:00 PM Central Time. Interested parties must review the attached Notice of Project for full details and information regarding a scheduled pre-proposal meeting to address questions and clarify requirements. The contract is managed through SSC Services for Education, with Eric Brewer of SSC serving as the primary point of contact, reachable via email at Eric.Brewer@sscserv.com or by phone at 979-224-4498. The work is to be performed in Victoria, Texas, under the oversight of the Texas A&M University System, which is acting on behalf of its partner organization. Proposals must comply with all technical, procedural, and safety standards outlined in the solicitation documents, accessible through the provided TX SmartBuy portal link. There is no set-aside classification listed, making this opportunity open to all eligible bidders regardless of business size or ownership status.
Texas A&M University System

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 238910
New
SLED
Demolition of Ten (10) Residential Structure, Beaumont, TexasThe City of Beaumont is seeking qualified contractors to perform the demolition and debris removal of ten residential structures located in Beaumont, Texas. The contract requires full provision of labor, equipment, materials, and supplies necessary to safely and thoroughly remove all structures and haul away resulting debris in compliance with applicable local, state, and federal regulations. Bidders must be prepared to meet all technical and operational requirements outlined in the solicitation, and must demonstrate the capacity to complete the work efficiently and in accordance with the city’s standards. The project is open to all eligible bidders without specific set-aside provisions, and performance is expected to occur entirely within the city limits of Beaumont. Proposals must be submitted by the deadline of August 14, 2026, at 4:00 PM Central Time, with the solicitation issued under reference number Ji0726-52 and publicly posted on July 24, 2026. All questions or communications regarding this bid should be directed to June Jordan, the primary point of contact, via email at june.jordan@beaumonttexas.gov or by phone at 409-880-3757. Interested parties can access full solicitation details through the city’s online bidding portal at the provided UI link. Contractors are advised to review all requirements carefully prior to submission to ensure complete and compliant responses.
City Of Beaumont

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 238910
New
SLED
Site Preparation and GradingThe contract entails comprehensive site preparation activities including clearing, excavation, grading, and erosion control measures for a building site near Range 7-1 at the Ethan Allen Firing Range. Work must adhere to established environmental and safety standards to ensure proper land modification and long-term stability of the area. The scope focuses solely on earthwork and land preparation services with no mention of construction or infrastructure beyond site readiness. The task is classified as a subcontract under NAICS code 238910, indicating specialized construction services related to site preparation. The solicitation was posted on July 24, 2026, with a firm deadline for responses set for September 1, 2026, at 6:00 a.m. The project is administered by the Vermont Department of Economic Development, and all work is to be performed at the specified location in Vermont, though no exact city or zip code is provided. Bidders must be prepared to meet all regulatory requirements for land disturbance and erosion prevention in a potentially sensitive or restricted military-adjacent area.
Department of Economic Development

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 238910
New
SLED
Site Preparation and GradingThe contract under the title Site Preparation and Grading involves the comprehensive clearing, grubbing, excavation, and grading of a site to establish a stable and level foundation suitable for subsequent hardscape and landscape installations. This work is essential to ensure proper drainage, structural integrity, and alignment with design specifications for outdoor improvements. The scope requires meticulous removal of vegetation, debris, and unwanted materials, followed by precise earthmoving and contouring to meet engineering requirements. The contract is classified as a subcontract with a NAICS code of 238910, indicating it falls under site preparation services. It is issued by the Department of Economic Development in Vermont, with a proposed response deadline of September 1, 2026. The posting date indicates the opportunity was made available in July 2026, and potential bidders must submit proposals prior to the specified deadline. The place of performance and point of contact details are not provided, but interested parties can access further information through the official Vermont business registry link. This opportunity is open without a specified set-aside designation, suggesting eligibility extends to all qualified subcontractors regardless of size or ownership status.
Department of Economic Development

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 238910
New
SLED
Glenwood Resource Center – Building Demolition – Phase IThe Glenwood Redevelopment Corporation is seeking qualified contractors to perform the first phase of demolition services at the Glenwood Resource Center Campus in Glenwood, Iowa, under solicitation number 005-RFB-2944-2027. Bids must be submitted by Wednesday, August 12th, 2026, at 2:00 PM Central Time, and all interested parties are required to register on the A&D Technical Supply Planroom website to access the full solicitation documents. The project is governed by the Iowa Department of Administrative Services, with the primary point of contact being Craig Trotter, reachable at 515-322-8593 or craig.trotter@das.iowa.gov. While the physical work is located in Glenwood, the contracting agency is based in Des Moines, Iowa, and the official bid opportunity is posted on the Iowa state procurement portal. Bidders are strongly encouraged to review the solicitation details on the A&D platform or contact the provided email for clarification prior to submission.
Department of Administrative Services

POSTED

1 day ago

DEADLINE

in 18 days
View Details
NAICS: 238910
New
Federal
Concrete and Foundation WorkThe contract pertains to the placement of footings and foundation concrete for the structural support of aircraft parking structures, under the NAICS code 238910 for Other Heavy and Civil Engineering Construction. It is a subcontract classified as a Total Small Business Set-Aside, exclusively available to small businesses as defined by the Small Business Administration under FAR 19.5. The work is to be performed at a location in Homestead, Florida, with a zip code of 33039, under the purview of the Department of Defense, specifically the FA6648 482 Lss Lgc office. The solicitation was posted on July 24, 2026, and responses are due by August 21, 2026, at 4:00 PM. The scope is limited to foundational concrete work directly supporting aircraft parking infrastructure, requiring specialized knowledge in structural concrete placement for high-load aerospace applications.
FA6648 482 Lss Lgc

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 238910
New
Federal
Excavation and Earthmoving ServicesThe contract calls for excavation, trenching, grading, and backfilling activities necessary to replace a weir structure, including the complete removal of the existing infrastructure and proper soil compaction to ensure structural integrity. All earthmoving services must be performed to meet technical specifications for site preparation and environmental stability, with attention to precision and safety standards during the removal and reconstruction phases. The work is limited to a single location in Alturas, California, with a zip code of 96101, and is subject to strict adherence to site-specific conditions and regulatory requirements. This is a subcontract classified under NAICS code 238910 for other heavy and civil engineering construction, and it is designated as a Total Small Business Set-Aside under SBA regulations, meaning only small businesses are eligible to bid. The solicitation was posted on July 24, 2026, with a response deadline of August 28, 2026, at 4:00 PM. The contracting entity is affiliated with the Department of the Interior under the Fws Construction & A/e - Bil/disaster office, though no specific point of contact or mailing address is provided. Bidders must comply with all federal subcontracting guidelines and ensure full compliance with the scope of work as outlined in the solicitation materials available via the provided SAM.gov link.
Fws Construction & A/e - Bil/disaster

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 238910
New
Federal
Site Excavation and GradingThe contract titled Site Excavation and Grading requires comprehensive earthwork operations to prepare land for two campsites and associated access roads, including the removal of topsoil, precise cut and fill activities, and final grading to ensure proper drainage. All work must meet strict site preparation standards to support safe, functional, and environmentally responsible campground infrastructure. The solicitation is designated as a Total Small Business Set-Aside under SBA regulations, ensuring eligibility is restricted to small businesses as defined by the FAR 19.5 guidelines. The North American Industry Classification System code 238910 applies, indicating the scope falls under site preparation services. Work is to be performed at Campbellsville, Kentucky, with a zip code of 42718, and the contract is issued under the Department of Defense through the W072 Endist Louisville office. The response deadline for submissions is August 13, 2026, at 3:00 PM, and the opportunity is posted as a subcontract with the solicitation available through the SAM.gov portal.
W072 Endist Louisville

POSTED

1 day ago

DEADLINE

in 19 days
View Details
NAICS: 238910
New
Federal
Excavation and Dewatering ServicesThe contract calls for excavation of trenches and installation of dewatering systems to support the placement of underground piping and valve chambers within the U.S. Embassy compound in New Delhi. Work is restricted to the embassy grounds with a postal code of 110021 and must comply with all security and operational standards applicable to diplomatic facilities. The NAICS code 238910 indicates this is a specialty trade contractor effort focused on site preparation and underground utilities. The solicitation is classified as a subcontract, meaning the prime contractor must manage and integrate this work within a broader construction or infrastructure project. The response deadline is August 11, 2026, at 8:30 AM, and proposals must be submitted prior to that time to be considered eligible. The contracting activity is under the U.S. Department of State, specifically through the Embassy in New Delhi, and all work must be performed on-site in accordance with federal standards and local regulations governing foreign government installations.
US Embassy New Delhi

POSTED

1 day ago

DEADLINE

in 16 days
View Details
NAICS: 238910
New
Federal
Dry Dock Elevator DismantleThe U.S. Navy’s Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility is conducting market research to identify qualified contractors capable of dismantling and packaging for disposal three legacy dry dock elevators, including two Champion US-10000-FP elevators and one Industrial Rack and Pinion Elevator, encompassing all structural components, platforms, landings, and electrical systems. This sources sought notice is strictly for informational and market assessment purposes and does not constitute a solicitation, request for proposals, or any obligation for the government to award a contract. The effort falls under NAICS code 238910 with a size standard of $19 million and is classified under P500 for salvage and demolition of structures. Submissions are voluntary, and the government will not reimburse costs incurred by respondents. Interested parties must provide detailed organizational information including name, address, contact details, CAGE code, Sam.gov Unique Entity ID, ownership type, and a tailored capability statement with supporting documentation demonstrating experience and capacity to perform the specified dismantling and disposal tasks. Responses must be submitted via email to jodie.l.tramuto.civ@us.navy.mil no later than 09:00 AM HST on July 28, 2026, and no telephone inquiries will be accepted. The government will use submitted information solely to assess industry capability and readiness, and no feedback or evaluations will be provided to respondents regardless of submission quality or content.
Pearl Harbor Naval Shipyard IMF

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 238910
New
Federal
Demolition and Disposal of Barn, Riesel, TexasThis solicitation, numbered 1232SA26Q1005, is a combined synopsis and request for quotation for the complete demolition and disposal of a wind-damaged barn located at Riesel, Texas, under the USDA Agricultural Research Service. It is issued as a Total Small Business Set-Aside under FAR 19.5, with the NAICS code 238910 and a size standard of $19.0 million, ensuring that only small business concerns are eligible to respond. The acquisition follows the commercial item procedures of FAR Part 12, with a firm-fixed-price contract anticipated upon award. All proposals must be submitted by July 30, 2026, and are evaluated using a Lowest Price Technically Acceptable (LPTA) source selection method, meaning the lowest-priced offeror that meets minimum technical acceptability and past performance standards will be selected. Technical acceptability requires a detailed approach and demonstration of capability through two recent, relevant projects, while past performance is assessed on quality, timeliness, cost control, and compliance. The work scope includes pre-demolition utility disconnection, mechanical dismantling, segregation and proper disposal of five debris categories, a two-pass magnetic sweep within a 150-foot radius, and site restoration to original contours. All activities must comply with Texas DEQ regulations for construction and demolition debris, OSHA standards including on-site presence of a 30-hour trained superintendent, and federal procurement rules. The contractor is responsible for recycling scrap metal through licensed facilities, submitting disposal manifests, coordinating with site personnel to avoid damage to research assets, and contacting 811 before any ground disturbance. Security and information safeguarding requirements include compliance with FAR 52.240-92 and 52.240-93, as well as USDA-specific Personal Identity Verification policies for personnel. The contract incorporates clauses addressing trafficking in persons, contractor code of conduct, subcontracting restrictions, accelerated payments to small business subcontractors, and various certifications including Buy American, employment eligibility, and anti-discrimination compliance. Performance must be completed within 60 days of award, with FOB Destination terms applying, and final acceptance will occur at the Riesel, Texas site by an Authorized Government Representative. Offerors must be registered in SAM.gov with a valid UEI, and all proposals must be submitted to the USDA ARS Acquisition and Property Division in Beltsville, Maryland. Site coordination and inquiries should be directed to Kyle T
USDA Ars Afm Apd

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 238910
New
SLED
Earthwork and Excavation ServicesThe contract titled Earthwork and Excavation Services solicits subcontractors to perform comprehensive site preparation activities including excavation, backfilling, and subgrade preparation for buildings, utilities, and pavements. Work is to be conducted at various locations across Michigan, with no specific city or zip code designated, indicating a broad geographic scope for project execution. The contracting entity is DTMB under the Michigan state agency, and the work falls under NAICS code 238910, which categorizes it as other foundation, structure, and building exterior contractors. The opportunity is posted as a subcontract with no set-aside designation, meaning it is open to all qualified vendors regardless of business size or ownership status. Proposals must be submitted by the response deadline of August 12, 2026, at 6:00 PM eastern time, following an initial posting date of July 24, 2026. There is no designated point of contact provided in the data, and the physical address for the office or agency is not specified, suggesting that communication and submission will likely be handled electronically through the provided Michigan state procurement portal link. All work must comply with standard industry practices for earthwork and subgrade preparation, ensuring that site conditions are properly established to support subsequent construction phases. Contractors are expected to bring the necessary equipment, personnel, and expertise to meet contractual obligations across multiple, unspecified job sites throughout the state.
DTMB

POSTED

2 days ago

DEADLINE

in 18 days
View Details

More opportunities from California → Procurement Department of OmniTrans

Same awarding agency

NAICS: 238990
New
SLED
Prevailing Wage & Payroll Compliance (Davis-Bacon Act)This contract requires strict adherence to the Davis-Bacon Act for all labor performed in connection with installation or integration work, mandating payment of prevailing wages as determined by the U.S. Department of Labor for the specific geographic location of the project. All contractors and subcontractors must ensure their workers are compensated at the federally mandated rates and submit certified payroll records on a weekly basis to demonstrate full compliance. The work is classified under NAICS code 238990, indicating it involves other specialty trade contractors, and is structured as a subcontract under the Procurement Department of OmniTrans in California. Compliance is non-negotiable, with failure to meet wage or reporting requirements potentially leading to contract termination or financial penalties. All labor activities must be conducted in accordance with federal prevailing wage standards, and the contractor is responsible for verifying wage rates, maintaining accurate records, and submitting certified payroll documentation in a timely manner. The response deadline for this solicitation is July 28, 2026, at 10:00 PM Pacific Time.
All Other Specialty Trade Contractors

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 423120
New
SLED
Disadvantaged Business Enterprise (DBE) Participation ComplianceThe contract requires DBE-certified suppliers to provide parts, logistics, or fabrication services in support of a larger project, with the explicit goal of achieving 1% DBE participation by dollar value of the contract. Participation is mandatory and must be documented to demonstrate compliance with federal and state disadvantaged business enterprise requirements. Suppliers must be officially certified as DBEs and must perform meaningful work in their respective areas of expertise to count toward the participation target. The contract is structured as a subcontract opportunity under NAICS code 423120, indicating a focus on wholesale trade of motor vehicle supplies and new parts. All responses must be submitted by the deadline of July 28, 2026, at 10:00 PM Pacific Time, and the opportunity is managed by the Procurement Department of OmniTrans under the state of California. The project’s place of performance and point of contact details are not specified, but vendors are directed to the provided online portal for additional information and submission procedures.
Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 533110
New
SLED
Performance and Payment Bonding ServicesThe contract requires the provision of surety bonds at 100% of the contract value to secure both performance and payment obligations, ensuring full financial protection for the project. A 5% bid guarantee is mandatory, which must be submitted by applicants to demonstrate financial commitment and reduce risk during the bidding process. This requirement applies to all proposers seeking to participate in the subcontract under the Performance and Payment Bonding Services solicitation issued by the Procurement Department of OmniTrans in California. The solicitation is open for responses until July 28, 2026, at 10:00 PM, with a posting date of July 24, 2026, indicating a short four-day window for submissions. The NAICS code 533110 categorizes the service under Surety Bonding Services, aligning with the nature of the bonding requirements. The contract is classified as a subcontract, meaning the successful bidder will operate under a larger procurement structure managed by the agency. The location of performance and point of contact details are not specified, but the offering is accessible through the provided vendor portal link for further submission guidelines and documentation.
Lessors of Nonfinancial Intangible Assets (except Copyrighted Works)

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 423120
New
SLED
Supply of Replacement Bus Parts (Mechanical & Electrical Components)The contract is for the procurement and delivery of mechanical and electrical replacement parts required for transit buses, covering critical systems such as engines, transmissions, braking systems, lighting, heating and ventilation, and control modules. These components are essential for maintaining operational readiness and extending the service life of the transit fleet, with the scope focused exclusively on replacement parts rather than new vehicles or major overhauls. The work involves timely and reliable supply chain management to ensure parts are available when needed for scheduled maintenance or emergency repairs. Submitted as a subcontract under NAICS code 423120, the solicitation is managed by the Procurement Department of OmniTrans in California, with responses due by 10:00 PM on July 28, 2026. All deliveries must meet specified technical and quality standards to ensure compatibility and safety across the transit bus fleet, and performance is expected to align with the operational demands of a public transportation system. The contract will require vendors to demonstrate capacity for consistent inventory availability, efficient logistics, and adherence to industry specifications for bus components.
Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 423860
New
SLED
07-24-26 MISC Bus PartsThis solicitation, RFQ-PRC27-07242026, is a request for quotes for miscellaneous bus parts issued by the Procurement Department of Omnitrans in California, funded by the Federal Transit Administration under the U.S. Department of Transportation. Quotes must be submitted electronically via Omnitrans’ Online Bidding System by July 28, 2026, and remain valid for 30 days with no guarantee of usage or award. Bidders are required to provide unit pricing that includes all costs except sales tax, core charges, and shipping/freight, with prices stated as FOB destination. Unit prices take precedence over total calculations, and errors in pricing will not be disallowed. Bidders must disclose any core charges in comments and comply with lead times specified for each line item if awarded. Awards may be split among the lowest responsive, responsible bidders based on inventory availability and overall benefit to Omnitrans. All purchase orders issued under this RFQ will incorporate Omnitrans’ Standard Purchase Order Terms and Conditions, and awarded vendors must confirm receipt within 24 hours; failure to meet lead times may result in order cancellation. The contract is subject to extensive federal regulatory compliance, including the Davis-Bacon Act requiring payment of prevailing wages and submission of weekly certified payroll records, the Copeland Anti-Kickback Act, Buy America provisions for materials, and Disadvantaged Business Enterprise participation goals of 1% of contract value. Contractors must also comply with civil rights requirements under Title VI, ADA accessibility standards, environmental regulations including the Resource Conservation and Recovery Act, seismic safety standards under 49 CFR Part 41, and whistleblower protections. All contract records are subject to public disclosure under the California Public Records Act, and contractors are prohibited from engaging in lobbying activities or making campaign contributions during the bid and contract period. Deliveries must be made to Omnitrans’ receiving department in San Bernardino, CA, with packing slips including the purchase order number, item description, and part number accompanying each shipment. All invoices, shipping notices, and correspondence must clearly display the purchase order number. Bonding requirements mandate a 5% bid guarantee and 100% performance and payment bonds. The solicitation does not specify a contract value due to the absence of line-item pricing or quantity data, and there is no guaranteed volume. No formal contracting officer or technical representative contact information is provided, but oversight responsibilities lie with Omnitrans and the Federal Transit Administration, which retains audit and compliance
Transportation Equipment and Supplies (except Motor Vehicle) Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 3 days
View Details
New
SLED
Parts Washers

POSTED

3 days ago

DEADLINE

in 26 days
View Details
NAICS: 541512
SLED
FAREBOX REPLACEMENTOmnitrans is soliciting proposals to replace its existing fare collection system through RFP ITS26-42, with responses due by September 16, 2026. The procurement is aimed at modernizing the agency’s fare technology to improve efficiency, reliability, and rider experience across its transit network in California. The contract falls under the State, Local, and Education (SLED) category, with the Procurement Department of Omnitrans serving as the issuing agency and Rick Barone designated as the primary point of contact for inquiries. All proposals must be submitted via the provided online portal before the deadline, and the system replacement will be implemented across all service areas operated by Omnitrans, though specific performance locations are not detailed. Interested vendors should ensure their submissions address technical specifications, implementation timelines, support infrastructure, and compliance with industry standards for transit fare systems.
Computer Systems Design Services

POSTED

11 days ago

DEADLINE

in about 2 months
View Details
NAICS: 541110
SLED
General Counsel Legal ServicesOmnitrans, through its Procurement Department in California, is seeking a single law firm to serve as its primary legal counsel under a dedicated core team of attorneys, providing comprehensive legal support across operational, regulatory, contractual, and business matters. The solicitation, RFP-ADM26-31, was posted on July 9, 2026, with responses due by August 13, 2026, at 11:00 PM Pacific Time, and is targeted at state and local government entities under the SLED classification. The selected firm must be prepared to deliver consistent, high-quality legal services aligned with the agency’s strategic objectives, with all work performed within California under the oversight of OmniTrans. Primary point of contact for inquiries is Rick Barone, reachable via email at rick.barone@omnitrans.org or phone at 909-379-7204, with additional details available through the online portal at the provided link.
Offices of Lawyers

POSTED

17 days ago

DEADLINE

in 19 days
View Details
NAICS: 485310
SLED
ON DEMAND MOBILITY RIDESHARE PROGRAMThe Procurement Department of Omnitrans in California is soliciting proposals for an On-Demand Mobility Rideshare Program to provide transportation services specifically for seniors and individuals with disabilities. Interested parties must demonstrate professionalism, responsiveness, and the ability to deliver reliable on-demand rideshare solutions that meet the unique needs of this population. The solicitation, numbered RFP-SDD26-33, was posted on June 23, 2026, with submissions due by August 6, 2026, at 11:00 PM Pacific Time. The program aims to enhance mobility access across the service area, with performance expected within the jurisdiction of Omnitrans in California. Proposers must be prepared to comply with all program requirements, including service standards, safety protocols, and equity considerations for vulnerable riders. Cody Leslie of the Omnitrans Procurement Department serves as the primary point of contact for inquiries regarding the RFP and can be reached via email at cody.leslie@omnitrans.org or by phone at 909-379-7122. The solicitation is open to qualified vendors under a state and local government entity procurement framework, and all proposals must be submitted through the official portal accessible at the provided uiLink. There is no specified set-aside classification, and while the NAICS code is not indicated, proposers should ensure their qualifications align with transportation and mobility services standards. Successful bidders will be expected to integrate seamlessly with existing Omnitrans systems and deliver scalable, accessible, and timely transportation options to support the community’s most vulnerable populations.
Taxi and Ridesharing Services

POSTED

about 1 month ago

DEADLINE

in 12 days
View Details