This Solicitation opportunity from Department Of Defense was posted on September 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SEMICONDUCTOR DEVICE, D

Closed

SPE7M1-26-Q-1415Federal

Submission Closed09/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334413

New

DIBBS

Supply of Electronic Component (NSN 5962-01-324-1267)This subcontract involves the manufacture and supply of four units of electronic component NSN 5962-01-324-1267 for prime contractors supporting DLA supply contracts. The components must be produced in accordance with Basic Drawing NR 67268 5962-87669 and TDP Rev A Gen 1, with strict adherence to IPC/JEDEC J-STD-609 for marking and MIL-STD-2073-1E and MIL-STD-129 for packaging. Managed by the Department of Defense under the DLA Weapons Support Active Devices Division, the contract requires full supply chain traceability per DLAD Procurement Note C03 and the submission of all necessary test reports. The performance of the contract is centered in Columbus, Ohio, under NAICS code 334413.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Specialized Connectors and WiringThis subcontract involves the supply of raw materials, specialized connectors, shielding, and high-grade wiring to prime contractors supporting the DLA Weapons Support ASC Commodities Division. A primary focus of the agreement is the sourcing of components for Kongsberg part number 60269836-02. To maintain the integrity of these critical applications, the provider must deliver certified electronic components accompanied by Certificates of Conformance. The contract mandates strict adherence to the Buy American Act and DFARS standards for the prevention of counterfeit parts. Operating under NAICS code 334413, the project is managed by the Department of Defense. The solicitation was posted on October 27, 2026, with a response deadline set for November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Semiconductor Device (Thyristor)This subcontract through the DLA Weapons Support Active Devices Division involves the manufacture or procurement of three semiconductor thyristors intended for prime contractors supporting FMS Taiwan. The devices must strictly adhere to NSN 5961-01-115-2436, Teledyne Drawing 6A2027, and Reference Drawing NR 90911 22D1246 Revision E. Quality assurance requires Gross Leak testing conducted per MIL-STD 750 using FC-40 fluid, with all final deliveries accompanied by the necessary test documentation. Compliance and traceability are critical components of this agreement, requiring adherence to NIST SP 800-171 standards and DLAD Procurement Note C03. The contract falls under NAICS code 334413 and is managed by the Department of Defense. Interested parties must meet the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supplier of Electronic Shielding Gaskets (NSN 5999-01-297-9595)This subcontract involves the supply of two electronic shielding gaskets for prime contractors supporting DLA supply contracts. The supplier is responsible for manufacturing or sourcing gaskets that strictly adhere to NSN 5999012979595 specifications. All deliverables must be packaged according to RP001 and marked in compliance with MIL-STD-129. The contract requires strict adherence to safety and environmental regulations, specifically 29 CFR 1910.1200 for hazardous materials and DFARS 252.223-7008 concerning hexavalent chromium. Managed by the Department of Defense under the DLA Weapons Support Maritime Supply Chain, the performance of this contract is centered in Tobyhanna. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Capacitor Assembly Supplier (NSN 5910-01-732-9561)This subcontract involves the manufacture or sourcing of four specialized capacitor assemblies for the DLA Weapons Support ASC Commodities Division. The assemblies must strictly adhere to Northrop Grumman part number 6D33520G01 and NSN 5910-01-732-9561 specifications. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 334413. Compliance requirements include a CMMC Level 2 Self-Assessment and adherence to the Buy American and Balance of Payments Program. Quality assurance must be maintained through sampling per MIL-STD-1916 or ASQ H1331. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

RF Cable and Connector SupplyThis subcontract involves the supply of high-grade RF coaxial cabling and precision connectors for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work specifically requires materials that meet the specifications for part number 06-1-17-040-0FL, including the delivery of raw cabling and connectors along with necessary Certificates of Conformance to ensure full traceability. To maintain compliance with federal regulations, all provided materials must be of domestic origin in accordance with the Buy American Act and the Berry Amendment. The performance of this contract is centered in Albany, and the procurement falls under NAICS code 334413.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplemental Small Arms-Fragmentation Protective Armor SupplyThis subcontract, titled Supplemental Small Arms-Fragmentation Protective Armor Supply, involves the manufacture or sourcing of 18 units of fragmentation-resistant armor identified by NSN 2540015634524. The armor must be constructed from ballistic-grade ceramic, composite, or steel materials to protect against small arms and fragmentation, ensuring strict compliance with NSN technical specifications and Department of Defense quality assurance standards. Managed by the DLA Weapons Support LSO Combat Vehicles and Armament under the Department of Defense, the contract supports prime contractors delivering on Army supply contracts. The place of performance is located in New Cumberland, Pennsylvania. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026, falling under NAICS code 334413.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Semiconductor Device, Diode (NSN 5961-01-583-6570)This subcontract through the Department of Defense DLA Weapons Support ASC Supplier OEM Division requires the procurement of 40 units of Semiconductor Device Diodes, part number 30-251-11AA. The hardware must strictly adhere to NSN 5961-01-583-6570 specifications, including compliance with MIL-PRF-81705 and rigorous ESD and EMI protection standards. Lead finishes must be marked according to IPC/JEDEC J-STD-609 and MIL-STD-129 guidelines. The successful provider must ensure full supply chain traceability and utilize approved ESD packaging for delivery. Additionally, the contract mandates a CMMC Level 2 self-assessment to meet security requirements. Performance for this requirement is centered in New Cumberland, Pennsylvania, under NAICS code 334413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of DC-to-DC Converters (NSN 6130-01-684-6957)This subcontract involves the procurement and delivery of four DC-to-DC converters, specifically part NSN 6130-01-684-6957, for prime contractors serving the Defense Logistics Agency. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Eligible providers must maintain a valid CAGE code and Unique Entity Identifier while ensuring full compliance with DFARS regulations regarding prohibited defense telecommunications equipment. Suppliers are required to guarantee the domestic origin of the components and provide comprehensive details regarding the brand, manufacturer, and model of the delivered units.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Fixed Wire Wound Resistors (NSN 5905010615805)This subcontract involves the supply of five fixed wire wound inductive resistors meeting NSN 5905010615805 specifications for prime contractors supporting DLA supply contracts. The work is managed by the Department of Defense under the DLA Weapons Support Maritime Supply Chain ESOC Buys, with the place of performance located at Hill AFB. The contractor is required to adhere to strict military and industry standards, including marking per MIL-STD-129 and packaging according to MIL-STD-2073-1E. Additionally, unit package marking for component lead finish must comply with IPC/JEDEC J-STD-609. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Digital Microcircuits (NSN 5962016772770)This subcontract, issued by the Department of Defense under the DLA Weapons Support Active Devices Division, involves the supply of seven digital microcircuits identified by NSN 5962016772770. The components must be delivered to Columbus, Ohio, and must strictly adhere to IPC/JEDEC J-STD-609 for marking and MIL-STD-2073-1E for packaging. To ensure quality and authenticity, the provider must comply with the DLA Counterfeit Detection and Avoidance Program standards. All deliverables must be accompanied by comprehensive traceability documentation and detailed test reports to verify compliance with the specified technical requirements.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

RF Connectors and High-Frequency Cable SupplyThis subcontract opportunity is for the supply of high-frequency coaxial cables and RF connectors to support prime contractors under the DLA Weapons Support Land Supplier Opns Engines. All provided materials must strictly adhere to TDP Rev B Gen 2 and associated reference drawings, ensuring the delivery of certified raw materials and components. The contract is designated as a Total Small Business Set-Aside under NAICS code 334413. Compliance with the Buy American Act and DFARS restrictions regarding covered telecommunications equipment is mandatory. Performance for this Department of Defense requirement will take place in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 21 hours ago

DEADLINE

in 12 days

AI Contract Overview

Solicitation SPE7M1-26-Q-1415 is a total small business set-aside issued by DLA Land and Maritime for the procurement of eight semiconductor diodes, specifically part number JANTX1N6628US under NSN 5961-01-452-8408. This is a firm-fixed-price requirement with a delivery schedule of 274 days after the order is placed. Inspection and acceptance will occur at the point of origin. The award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to technical and quality standards, including the Qualified Manufacturers List and Qualified Suppliers List of Distributors for semiconductor devices. Key requirements include the retention of supply chain traceability documentation and compliance with MIL-PRF-19500R. Packaging must meet MIL-STD-129 and MIL-DTL-19491 standards, with specific requirements for DOD qualified electrostatic discharge and electromagnetic interference protection per MIL-PRF-81705. Additionally, components must be marked according to IPC/JEDEC J-STD-609 for lead finish and handled at approved protective workstations to prevent lead damage. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

General Info

DLA Land and Maritime seeks eight semiconductor diodes via small business set-aside.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN

NAICS

334413 - Semiconductor and Related Device Manufacturing

Place of Performance

JOR

Set-Aside

SBA

Documents

SPE7M1-26-Q-1415 RFQ

21 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 3

Solicitation

Response DeadlineSep 17

Deadline has passed

Submission Closed

09/17/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

Office AddressUSA

Contacts

BRANDON ANDERSON

contact@example.gov

+1 (555) 000-0000

Full Description

SEMICONDUCTOR DEVICE,DIODE.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ007: QUALIFIED MANUFACTURERS LIST (QML) INTEGRATED CIRCUITS, HYBRID
MICROCIRCUITS, AND SEMICONDUCTOR DEVICES DLA MARITIME
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ014: QUALIFIED SUPPLIERS LIST OF DISTRIBUTORS (QSLD) AND QUALIFIED
TESTING SUPPLIERS LIST (QTSL) FOR FEDERAL SUPPLY CLASS (FSC) 5961
SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
MICROCIRCUITS. THIS IS A QUALIFIED ITEM. QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE M01 "QUALIFIED SUPPLIERS FOR FEDERAL SUPPLY CLASS (FSC)
5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
MICROCIRCUITS" APPLY.
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-19500R(1) REVISION NR R DTD 02/06/2026 PART PIECE NUMBER: JANTX1N6628US
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 5961-01-452-8408 8.000 EA $ _______________ $ ______________
SEMICONDUCTOR
DEVICE,DIODE
PRICING TERMS: Firm Fixed Price
SPE7M1-26-Q-1415
SECTION B
SUPPLY/SERVICE: 5961-01-452-8408 CONT'D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
FOB: ORIGIN DELIVERY DATE: 274 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:K3 CUSH/DUNN MAT:P4 CUSH/DUNN THKNESS:C
UNIT CONT:B9 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PRESERVATION AND PACKAGING SHALL BE IAW THE LATEST REVISION OF MILITARY SPECIFICATION: MIL-DTL-19491, FOR SEMICONDUCTOR DEVICES. UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961
SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
MICROCIRCUITS
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from
SPE7M1-26-Q-1415
SECTION B
SUPPLY/SERVICE: 5961-01-452-8408 CONT'D
ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals. ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
BULK BREAK POINT:
W81NMJ
0055 AD BN 02 CO F MAINTENANC
FB5808 ROYAL JORDANIAN AIR FORCE
UNIT 61817 AWCF SSA GCSS ARMY
MUWAFFAQ SALTI AB
JO
RDD 555 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
W81NMJ
SPE7M1-26-Q-1415
SECTION B
SUPPLY/SERVICE: 5961-01-452-8408 CONT'D
0055 AD BN 02 CO F MAINTENANC
FB5808 ROYAL JORDANIAN AIR FORCE
UNIT 61817 AWCF SSA GCSS ARMY
MUWAFFAQ SALTI AB
JO
MARKFOR
W81NMJ
0055 AD BN 02 CO F MAINTENANC
FB5808 ROYAL JORDANIAN AIR FORCE
UNIT 61817 AWCF SSA GCSS ARMY
MUWAFFAQ SALTI AB
JO
M/F: (TCN) W81NMJ61080051
RDD: 555
PROJ: 9AL TP 1
SUPP ADD: W81NMJ SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 01
DIC: A01 DIST: ADV: FC: Z9
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7016523442 0001 N/A N/A N/A 04/27/2026

SPE7M1-26-Q-1415 NSN/Part Number: 5961-01-452-8408 Quantity: 8 EA Purchase Request: 7016523442QTY: 8 Delivery: 274 days ADO