Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Sensor Calibration Certificate Services

Active

Federal

Response Deadline07/29/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Sensor Calibration Certificate Services requires the provision of both physical and electronic calibration certificates for each delivered sensor, ensuring full traceability to national standards. This subcontract, issued under NAICS code 541380 by the Department of Defense through the agency W6QK Acc-Apg, is focused on maintaining precise measurement integrity for sensors used in defense-related applications. Calibration documentation must meet rigorous quality and compliance requirements to guarantee accuracy and reliability across all delivered units. The solicitation was posted on July 22, 2026, with a response deadline of July 29, 2026, indicating a short turnaround for proposals. Performance is to be carried out at Aberdeen Proving Ground, a key U.S. military installation, emphasizing the critical nature of the calibration services in support of national defense operations. No specific set-aside designation is listed, and no point of contact information is provided, requiring potential bidders to refer to the official SAM.gov portal for further details and submission guidelines.

General Info

Provide physical and electronic sensor calibration certificates traceable to national standards for defense use at Aberdeen Proving Ground.

Agency

Department Of Defense → W6QK Acc-ApgView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Aberdeen Proving Ground, MD, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineJul 29

Submission deadline

Response Deadline

07/29/2026, 12:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Apg

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Acc-Apg

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provision of physical and electronic calibration certificates for each delivered sensor, traceable to national standards.

Similar Contracts

Same NAICS industry code

FY26 FR0 DFS/PHL - QCI Annual Pipette CalibrationThe contract pertains to the annual calibration of pipettes under the Forensic Sciences Division of the District of Columbia for the fiscal year 2026. It is listed as a forecast notice with no solicitation number assigned, indicating it is a preliminary indication of intent to procure services rather than an active solicitation. The agency responsible is the District of Columbia’s Forensic Sciences (DFS) and the service will be performed at a location yet to be specified. There is no NAICS code, type of set-aside, or organization type provided, suggesting the procurement is not currently restricted or categorized under federal small business or other set-asides. The posting date is July 23, 2026, and no point of contact information is available. Interested parties should monitor the official procurement portal for updates or formal solicitations as the fiscal year approaches.

Forensic Sciences (DFS)

POSTED

about 8 hours ago

DEADLINE

FY26 FR0 DFS/PHL - Gerstel VOC Service AgreementThe contract titled FY26 FR0 DFS/PHL - Gerstel VOC Service Agreement is a forecasted service agreement under the Forensic Sciences (DFS) division of the District of Columbia, targeting fiscal year 2026. It pertains to the provision of VOC service support, likely involving instrumentation or analytical services related to volatile organic compound detection and monitoring, which is critical for forensic and environmental testing operations. The contract is posted as a forecast on July 23, 2026, indicating it is a preliminary notice for upcoming procurement activity rather than an active solicitation. No solicitation number, NAICS code, set-aside details, or agency organization type have been specified, and there is no listed place of performance or point of contact, suggesting the document is in early planning stages. The absence of detailed geographic or organizational identifiers implies that further information will be released in a formal solicitation. The official notice is accessible through the District of Columbia’s contracts portal, but no deadlines, funding amounts, or vendor eligibility criteria are currently available. Stakeholders are urged to monitor the portal for future updates or formal requests for proposals.

Forensic Sciences (DFS)

POSTED

about 8 hours ago

DEADLINE

FY26 FR0 DFS/PHL - Nanopore Service AgreementThe contract titled FY26 FR0 DFS/PHL - Nanopore Service Agreement is a forecasted procurement under the Forensic Sciences division of the District of Columbia, targeting services related to nanopore technology for forensic applications in fiscal year 2026. No solicitation number has been issued yet, and the contract is currently in the pre-solicitation phase with no detailed award information, set-aside preferences, or NAICS code provided. The work is expected to be performed within the District of Columbia, though the exact location remains unspecified. There is no identified point of contact for inquiries, and the agency has not yet released information regarding the scope of services, technical requirements, or performance metrics. Interested parties should monitor the official portal via the provided UI link for future updates, including the release of a formal solicitation, eligibility criteria, submission deadlines, and any additional specifications related to nanopore sequencing services for forensic analysis.

Forensic Sciences (DFS)

POSTED

about 8 hours ago

DEADLINE

Forensic AssuranceThe District of Columbia’s Forensic Sciences division has posted a forecast for forensic assurance services related to proficiency tests, scheduled for future procurement activity beginning July 23, 2026. This action is intended to support the ongoing quality and reliability of forensic testing protocols through external evaluation mechanisms, though specific details regarding scope, deliverables, or timelines have not yet been defined. The opportunity is currently categorized as a forecast with no solicitation number assigned, indicating it is in the planning phase and not yet open for bid. The contracting entity is the Forensic Sciences division operating under the District of Columbia government, with no set-aside designation, NAICS code, or organization type specified at this time. The place of performance and point of contact information are incomplete, and no physical address or contact details are provided in the posting. Interested parties should monitor updates via the provided UI link for subsequent solicitation notices, as further information including requirements, deadlines, and submission guidelines will likely be released closer to the anticipated procurement date.

Forensic Sciences (DFS)

POSTED

about 8 hours ago

DEADLINE

FY26 FR0 DFS/PHL - O2Si Proficiency TestThe contract titled FY26 FR0 DFS/PHL - O2Si Proficiency Test is a forecasted procurement under the Forensic Sciences division of the District of Columbia, aimed at securing services related to a proficiency test for the O2Si system. This initiative is designed to evaluate and validate the accuracy and reliability of forensic testing procedures, ensuring adherence to quality standards within the lab environment. While the solicitation number and NAICS code are not specified, the posting date indicates this opportunity is anticipated for fiscal year 2026, allowing vendors and service providers time to prepare potential proposals. The place of performance and organizational details such as the specific office address, point of contact, and type of set aside remain unspecified, suggesting the information is still under development or will be released in a subsequent solicitation. The forecast is accessible through the District of Columbia’s contracts portal, providing interested parties a link to monitor updates and future announcements. This forecast signals an upcoming requirement for a structured proficiency evaluation program critical to maintaining forensic accreditation and operational integrity within the laboratory services of the Department of Forensic Sciences.

Forensic Sciences (DFS)

POSTED

about 8 hours ago

DEADLINE

FY26 FR0 DFS/PHL - Thermo Fisher ABI 7500 Fast Dx Service AgreementThe contract relates to the FY26 Forensic Sciences Division service agreement for the Thermo Fisher ABI 7500 Fast Dx instrument, which is anticipated to support forensic DNA analysis operations within the District of Columbia. This forecast notice indicates a future procurement opportunity for ongoing maintenance, calibration, and technical support services for the specified laboratory equipment, ensuring operational continuity and compliance with forensic standards. The posting date reflects an early-stage announcement intended to provide industry visibility into upcoming fiscal year requirements rather than an active solicitation. The agency responsible is the Forensic Sciences Division under the District of Columbia government, and the service is expected to be performed at the agency's facility, though specific location details are not provided. No set-aside status, NAICS code, or point of contact information is included, suggesting this is a preliminary notice rather than a formal request for proposals. Interested vendors should monitor the official portal for follow-up solicitations to submit bids when the full RFP is issued, as this forecast is not a binding obligation but a planning tool for potential suppliers.

Forensic Sciences (DFS)

POSTED

about 8 hours ago

DEADLINE

Air Monitoring StationThe District of Columbia’s Energy and Environment Agency is forecasting a grant opportunity under the Inflation Reduction Act to support ambient air monitoring through mobile platforms, with a funding allocation of $350,000 dedicated to the procurement of equipment and parts for a mobile air monitoring program. This initiative aims to enhance real-time environmental data collection across the city by deploying mobile units equipped with advanced sensors and diagnostic tools to assess air quality in diverse and high-priority locations. The grant will enable the acquisition of hardware necessary for deploying, maintaining, and upgrading mobile air monitoring stations, ensuring accurate, consistent, and scalable data gathering to inform public health and pollution mitigation efforts. Although the solicitation number and specific NAICS code are not yet available, the opportunity is posted under the agency’s public procurement portal with a future anticipated issuance date, indicating that interested parties should prepare for submission in the coming months. The place of performance is not yet specified but is expected to encompass various neighborhoods within the District of Columbia, prioritizing areas with elevated pollution levels or community health concerns. The program underscores a commitment to environmental justice and data-driven policymaking, leveraging federal funding to expand local capacity for monitoring and responding to air quality threats. Technical specifications for equipment and performance requirements will likely be detailed in subsequent formal solicitations.

Energy and Environment (DOEE)

POSTED

about 8 hours ago

DEADLINE

ISO AccreditationThe District of Columbia’s Chief Medical Examiner’s Office has issued a forecast for ISO Accreditation, indicating an upcoming procurement opportunity aimed at achieving or maintaining international standards for quality and operational excellence. The posting, made on July 23, 2026, is classified as a forecast and does not currently represent an active solicitation, meaning no formal bids are being accepted at this time. The contract is not associated with a specific NAICS code, set-aside designation, or contracted organizational type, leaving the scope of eligible vendors open but likely targeting accreditation bodies or consultants with expertise in ISO certification processes. The place of performance and agency address details are unspecified, suggesting that services may be delivered remotely or on-site at the OCME’s facilities in Washington, D.C. Interested parties should monitor the provided UI link for future solicitation updates, as the formal request for proposals is expected to be released at a later date.

Chief Medical Examiner (OCME)

POSTED

about 8 hours ago

DEADLINE

Security OperationsThe District of Columbia Corrections agency has posted a forecast for a security operations contract related to PREA audits, scheduled to be available for solicitation in 2026. This opportunity is intended to secure services for conducting compliance audits under the Prison Rape Elimination Act, ensuring facilities adhere to federal standards for the prevention, detection, and response to sexual abuse in detention environments. While specific solicitation details such as set-aside type, NAICS code, and contact information are not yet provided, the contract will require the contractor to perform comprehensive assessments across correctional facilities under the agency’s jurisdiction. The place of performance and organizational details remain unspecified, but the work is expected to take place within jurisdictional correctional facilities managed by the District of Columbia. Potential vendors should monitor the official procurement portal for the upcoming solicitation, as the posting serves as a preliminary notice to allow industry preparation. The lack of a solicitation number and point of contact indicates this is a planning-stage forecast, and interested parties are encouraged to track updates through the provided UI link for official release of requirements, deadlines, and submission guidelines.

Corrections (DC)

POSTED

about 8 hours ago

DEADLINE

FY 26-DOEE-LSHHD-Mold Inspection EquipmentThe District of Columbia’s Energy and Environment agency is forecasting a procurement for equipment to conduct mold inspections under the fiscal year 2026 initiative, designated as FY 26-DOEE-LSHHD-Mold Inspection Equipment. This action is part of the agency’s broader environmental and public health efforts to monitor and address indoor air quality concerns across District properties. Although the solicitation number, NAICS code, and set-aside details are not yet specified, the procurement is intended to acquire specialized tools and devices necessary for accurate mold detection, sampling, and analysis, which will support inspections in public and regulated buildings. The place of performance and organizational details are not provided, but the work will be conducted within the District of Columbia. The forecast was posted on July 23, 2026, and is accessible through the District’s contracts portal, indicating a planned acquisition timeline consistent with fiscal year 2026 budget cycles. No point of contact information is listed, suggesting this is a preliminary forecast and not a formal solicitation. Interested vendors should monitor the official portal for future updates, including the official RFP release, technical specifications, delivery requirements, and evaluation criteria. The equipment will likely need to meet industry standards for reliability, precision, and compliance with environmental health protocols, with an emphasis on usability by trained personnel in diverse building environments.

Energy and Environment (DOEE)

POSTED

about 8 hours ago

DEADLINE

Expert WitnessThe District of Columbia Attorney General’s Office has posted a forecast for expert witness services related to independent medical evaluations and written reports, with the opportunity scheduled for posting on July 23, 2026. This procurement is intended to secure qualified professionals who can produce objective, clinically grounded medical assessments and detailed written reports to support legal proceedings. The services will be performed in the District of Columbia, though specific location details are not provided, and there is no set-aside information or NAICS code listed, indicating this is an unclassified forecast intended for early industry awareness rather than an active solicitation. There are no designated points of contact listed yet, and interested parties are directed to the official procurement portal for future updates as the opportunity evolves toward a formal solicitation.

Attorney General (OAG)

POSTED

about 8 hours ago

DEADLINE

FY26 FR0 DFS/PHL - CAP Proficiency TestThe contract titled FY26 FR0 DFS/PHL - CAP Proficiency Test is a forecasted opportunity issued by the Forensic Sciences division of the District of Columbia, indicating a planned procurement for a proficiency test related to forensic analysis. Although the solicitation number is not yet assigned and the document is marked as a forecast, it signals intent to procure services in support of the College of American Pathologists (CAP) accreditation requirements, likely involving calibration, validation, or external quality assessment for laboratory testing procedures. The posting date of July 23, 2026, suggests this is part of the fiscal year 2026 planning cycle, and no set-aside type or NAICS code has been specified at this preliminary stage. There is no designated point of contact listed, and the place of performance and office address fields are left blank, indicating that logistical details are still pending or may be determined during the formal solicitation phase. The contract is accessible via a public portal link, allowing interested vendors to monitor its progression toward a formal request for proposal. As a forecast, this document serves as an early indicator for potential bidders to prepare for upcoming requirements related to forensic laboratory proficiency testing under CAP standards, with further details expected upon release of the full solicitation.

Forensic Sciences (DFS)

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Apg

Same awarding agency

Final Inspection, Packaging, and FMS Shipment PreparationThe contract requires the execution of a final quality inspection, followed by packaging in full compliance with MIL-STD-129 standards, including proper barcoding for traceability and inventory management. The successful vendor must coordinate the full lifecycle of FMS shipment preparation, ensuring all items are properly documented, secured, and dispatched to Morocco in accordance with international military logistics protocols. This work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and falls under the NAICS code 488999 for other support activities for transportation. The solicitation was posted on July 22, 2026, with a firm response deadline of August 11, 2026, at 2:00 p.m. Eastern Time. The performing agency is the Department of Defense, specifically under the office W6QK Acc-Apg, and the scope of work is tied to foreign military sales obligations, emphasizing precision, timeliness, and regulatory adherence. All activities must be conducted to support U.S. defense exports, with no alternative place of performance specified beyond the final destination in Morocco. The nature of the contract demands strict compliance with military standards and the ability to navigate international shipping requirements without direct oversight from the contracting office.

All Other Support Activities for Transportation

POSTED

DEADLINE

Supply of U.S.-Sourced Tactical Textile MaterialsThe contract solicits the supply of U.S.-sourced domestic raw materials essential for the production of plate carriers, including COYOTE TAN nylon fabric, webbing, hook-and-loop fasteners, zippers, and padding. All materials must be domestically manufactured and meet the required specifications for durability, performance, and color consistency to support tactical gear applications. The procurement is structured as a subcontract under a Total Small Business Set-Aside, restricted exclusively to small businesses as defined by the SBA, and falls under NAICS code 313320 for textile mill products. The opportunity was posted on July 22, 2026, with responses due by August 11, 2026, at 2:00 PM Eastern Time. The contracting activity is managed by the Department of Defense under the office designation W6QK Acc-Apg, with performance expected to support defense-related supply chains. Although specific delivery locations and point of contact details are not provided, the procurement emphasizes U.S. origin and compliance with small business set-aside regulations to promote domestic manufacturing capacity.

Fabric Coating Mills

POSTED

DEADLINE

Manufacturing of Berry Compliant Plate Carrier VestsThe contract calls for the full manufacturing of 230 COYOTE TAN plate carrier vests in Small, Medium, and Large sizes, encompassing all stages of production including cutting, sewing, quality control, labeling, and packaging. The project is subject to Berry Amendment compliance, ensuring that all materials and components originate from the United States, and is designated as a Total Small Business Set-Aside under SBA guidelines, reserving full eligibility for small business concerns. The work must be performed in accordance with military-grade specifications and delivered to meet stringent quality standards expected by the Department of Defense. The solicitation, issued under the NAICS code 315990 for Other Apparel and Accessory Manufacturing, is managed by the W6QK Acc-Apg office within the Department of Defense. Bids are due by August 11, 2026, and the opportunity was posted on July 22, 2026. The contract is structured as a subcontract and does not specify a location for performance, though all manufacturing must comply with federal procurement regulations and be completed within the prescribed timeline. Participation is restricted to certified small businesses, and the successful vendor will be responsible for end-to-end production with full accountability for deliverables and compliance.

Apparel Accessories and Other Apparel Manufacturing

POSTED

DEADLINE

Anodized Aluminum Mounting Base SupplyThe contract involves the supply of anodized aluminum mounting bases designed for sensor attachment, featuring precision-threaded holes including two 8-32 and one 10-32 thread configurations. These components are intended for use in defense-related applications and must meet strict material and finish specifications to ensure durability, corrosion resistance, and dimensional accuracy. The solicitation is categorized as a subcontract under NAICS code 332322, which corresponds to fabricated metal product manufacturing, and is linked to the Department of Defense through the agency name W6QK Acc-Apg, with performance required at Aberdeen Proving Ground. Interested vendors must submit responses by the deadline of July 29, 2026, with no set-aside provisions specified, meaning the opportunity is open to all eligible contractors regardless of business size or status.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Custom Cable Assembly Supply (9-Pin Jack to Pigtail, 30ft)The contract seeks the supply of custom 30-foot cable assemblies designed to connect a 9-pin jack to a pigtail configuration, specifically for sensor integration applications. These assemblies must meet precise technical requirements to ensure reliable signal transmission and compatibility with existing sensor systems, with all units expected to be manufactured to standardized specifications for consistent performance in field conditions. The work is tied to Department of Defense operations at Aberdeen Proving Ground, indicating the assemblies will support critical defense or testing infrastructure. The solicitation is issued as a subcontract under NAICS code 335999, which covers other electrical equipment and component manufacturing, and has a response deadline of July 29, 2026. The posting date is July 22, 2026, allowing a seven-day window for interested parties to submit proposals. The contract does not specify any set-aside status or demographic preferences, nor does it identify the primary contracting agency beyond the operational office W6QK Acc-Apg. All submissions must align with the defined technical scope, and performance obligations will be fulfilled at Aberdeen Proving Ground, with no additional location details provided.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Triaxial DC Accelerometer Supply (200G Range)The contract is for the supply of Dytran Model 7603D7 triaxial DC accelerometers with a 200g measurement range, intended for use by the Department of Defense under the agency name W6QK Acc-Apg. The opportunity is structured as a subcontract with a NAICS code of 334511, indicating it falls under semiconductor and other electronic component manufacturing. The solicitation was posted on July 22, 2026, with a response deadline of July 29, 2026, requiring vendors to submit proposals within this window. Performance of the contract is specified to take place at Aberdeen Proving Ground, aligning with the Defense Department’s testing and evaluation facilities. There is no set-aside designation or additional description provided for small business or other program preferences, and no point of contact information is included in the posting. The contract opportunity can be accessed through the SAM.gov platform using the provided link.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Triaxial DC Accelerometer Supply (50G Range)The contract involves the supply of ten Dytran Model 7603D5 triaxial DC accelerometers, each rated for a 50g measurement range, to be delivered to the Department of Defense under the agency name W6QK Acc-Apg. The solicitation, classified as a subcontract, was posted on July 22, 2026, with a response deadline of July 29, 2026, and falls under the NAICS code 334511 for other measuring and controlling device manufacturing. Performance of the contract is specified to occur at Aberdeen Proving Ground, indicating the end use is tied to defense-related testing or instrumentation needs at this location. The contract does not specify a set-aside type or point of contact, and no additional details about delivery schedules, payment terms, or technical specifications beyond the model and g-range are provided in the available data.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Triaxial DC Accelerometer Supply (±40G, Integral Cable)The contract pertains to the supply of ten Dytran Model 7533A7-05 triaxial DC accelerometers, each configured with a ±40G measurement range and a 5-foot integral cable. These units are intended for use in high-precision vibration and shock monitoring applications, likely supporting defense-related testing or instrumentation needs. The equipment must meet exact technical specifications, and the delivery is expected to align with the performance location at Aberdeen Proving Ground. This is a subcontract solicitation published on July 22, 2026, with a response deadline of July 29, 2026. The North American Industry Classification System code 334511 indicates the procurement falls under the manufacturing of instruments and related products for measuring and testing. The procuring entity is the Department of Defense through its W6QK Acc-Apg office, and no set-aside classification has been designated for this opportunity. Interested parties must submit proposals by the stated deadline to ensure consideration for award.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Export Compliance and CMMC SupportThis contract requires strict adherence to ITAR and DFARS export control regulations to ensure the secure handling and transfer of controlled technical data and defense-related information. The contractor must also prepare and submit complete CMMC Level 2 self-assessment documentation, demonstrating implementation of required cybersecurity practices and processes aligned with the Cybersecurity Maturity Model Certification framework. Additionally, the contractor must be prepared to support and facilitate a third-party assessment by a C3PAO after award, ensuring readiness for audit and verification of compliance. The contract is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with a NAICS code of 541618 for other scientific and technical consulting services. It is issued by the Department of Defense under the agency name W6QK Acc-Apg, with a submission deadline of August 1, 2026, and an initial posting date of July 22, 2026.

Other Management Consulting Services

POSTED

DEADLINE

Technical Data, IUID, and Documentation SupportThe contract titled Technical Data, IUID, and Documentation Support is a small business set-aside subcontract under the NAICS code 541611, issued by the Department of Defense through the W6QK Acc-Apg office. It requires the contractor to prepare and submit comprehensive documentation including IUID lists, warranty terms, technical compliance narratives, and proof of CMMC certification to meet federal regulatory and acquisition standards. All deliverables must align with specific technical and compliance requirements to ensure full adherence to Department of Defense protocols and data integrity standards. The solicitation was posted on July 22, 2026, with a firm response deadline of August 1, 2026, at 4:00 PM Eastern Time. This opportunity is exclusively available to small businesses as defined by the SBA’s Total Small Business Set-Aside provisions under FAR 19.5, ensuring preference for eligible small business concerns. The place of performance and point of contact details are unspecified in the provided data, suggesting logistics and communication will be coordinated post-award. Contractors must be prepared to demonstrate immediate capacity to fulfill all documentation obligations under tight timelines and stringent compliance benchmarks.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Supply of NVD Spare Parts Kits (Batteries, Pouches, Accessories)The contract involves the supply of 310 complete spare parts kits for the AN/PVS-7B night vision device, ensuring comprehensive functionality through inclusion of batteries, carrying pouches, spare components, and necessary accessories. All kits must meet exacting specifications to support operational readiness and maintenance of military-grade night vision equipment. The solicitation is designated as a total small business set-aside under SBA guidelines, restricting eligibility to qualified small businesses as defined by the Federal Acquisition Regulation. The North American Industry Classification System code 339999 categorizes this procurement under other miscellaneous manufacturing, indicating the specialized nature of the components being supplied. The contract was posted on July 22, 2026, with a firm response deadline of August 1, 2026, at 4:00 p.m. The award will be made through a subcontract arrangement under the Department of Defense, with the contracting office identified as W6QK Acc-Apg. While specific performance location and point of contact details are not provided, the procurement is part of a broader effort to sustain and equip military personnel with reliable night vision systems. Interested parties must ensure full compliance with small business certification requirements and technical specifications to qualify for consideration.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of Gen III Image Intensifier Tubes (Spare)The contract calls for the supply of eight spare Gen III image intensifier tubes featuring green phosphor and a minimum resolution of 60 line pairs per millimeter, designed specifically for compatibility with AN/PVS-7B night vision systems. These components are critical for maintaining operational readiness and are subject to strict technical specifications to ensure performance consistency across military-grade equipment. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only certified small businesses are eligible to respond, reinforcing federal efforts to support small business participation in defense contracting. The North American Industry Classification System code 334511 identifies the industry as photographic and cinematographic equipment and supplies manufacturing, aligning with the specialized nature of the product. The opportunity was posted on July 22, 2026, with a firm response deadline of August 1, 2026, at 4:00 PM, leaving a narrow window for qualified vendors to submit proposals. The contracting office, operating under the Department of Defense and identified as W6QK Acc-Apg, is responsible for overseeing the procurement, though no specific point of contact or physical delivery location is provided in the data. The contract does not specify a place of performance beyond the agency’s jurisdiction, and no additional terms such as delivery timelines, warranty provisions, or payment conditions are included in the available information. Bidders must ensure full compliance with technical requirements and small business certification to be considered.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE