Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Sensor-Sight Optical and Electronic Assembly

Active

Response Deadline10/14/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of the Navy, managed by DLA Aviation in Philadelphia, involves the high-precision assembly and integration of sensor and sight components for turret projects. The scope of work includes integrating optical sensors and sighting mechanisms, performing alignment and calibration according to reference 1S5X8 D3647120-1, and validating overall sensor functionality. The final deliverable is a fully assembled and calibrated internal assembly. To execute this contract, the provider must utilize clean-room assembly environments and high-precision optical alignment tools. Strict adherence to quality standards is mandatory, specifically requiring AS/EN/JISQ 9100 certification and CSI quality controls. The project falls under NAICS code 334418 and is based in Philadelphia, Pennsylvania.

General Info

Navy subcontract for high-precision sensor and sight assembly and calibration in Philadelphia.

Agency

Department Of The Navy → Pa DLA Aviation At Philadelphia

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

PHILADELPHIA, PA, 19111-5098, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRPA1-26-R-XB75.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TURRET,SENSOR-SIGHT — 1270016857990 — SPRPA126RXB75

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 7

subcontract

Response DeadlineOct 14

Submission deadline

Response Deadline

10/14/2026, 06:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Pa DLA Aviation At Philadelphia

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Pa DLA Aviation At Philadelphia

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs high-precision assembly and integration of sensor and sight components for prime contractors on DLA Aviation turret projects. Integrates optical sensors and sighting mechanisms, aligns and calibrates optics to reference 1S5X8 D3647120-1, and validates sensor functionality. Requires clean-room assembly and high-precision optical alignment tools. AS/EN/JISQ 9100 certification and CSI quality controls required. Delivers assembled and calibrated internal assembly.

Similar Contracts

Same NAICS industry code

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-0666

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-0662

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE4A5-27-T-0733

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

SWITCH SUBASSEMBLY

Solicitation # SPE7M8-27-T-0199

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 23 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-0613

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

ELECTRONIC COMPONENTS

Solicitation # SPE7M1-27-T-0758

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-0746

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

METER, FLOW RATE INDICA

Solicitation # SPE4A5-27-T-0621

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

FLASHER, THERMAL

Solicitation # SPE7M5-27-T-0418

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-0704

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-0637

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-0776

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of The Navy → Pa DLA Aviation At Philadelphia

Same awarding agency

RUDDER,AIRCRAFT — 1560014576482 — SPRPA127QZA10

Solicitation # SPRPA1-27-Q-ZA10

Solicitation SPRPA1-27-Q-ZA10, issued by DLA Aviation at Philadelphia on October 8, 2026, is a request for quotations for the procurement of an aircraft rudder, NSN 1560-01-457-6482. This item is designated as a Critical Safety Item (CSI) and is being solicited under Emergency Acquisition Flexibility Authority. The procurement is categorized as a small business-small purchase under NAICS code 336413. Delivery is required within 90 days, with terms specified as FOB Origin. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Past performance will be evaluated using the DoD Supplier Performance Risk System to assess item, price, and supplier risk. Technical requirements include strict adherence to MIL-STD-2073-1 for packaging, MIL-STD-129 for marking, and MIL-STD-147 for palletization. Because the item is a CSI, any departures from product definitions require an approved Request for Variance classified as major. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

TAB,TRIM,AIRCRAFT — 1560014559797 — SPRPA127QZA11

Solicitation # SPRPA1-27-Q-ZA11

Solicitation SPRPA1-27-Q-ZA11, issued by DLA Aviation at Philadelphia for the Department of the Navy, seeks quotations for aircraft trim tabs under NSN 1560-01-455-9797. This procurement is designated as a Critical Safety Item (CSI) and is being conducted under Emergency Acquisition Flexibilities. The government intends to make a single award to a responsible offeror, with evaluation criteria prioritizing past performance over price. Past performance will be assessed via the DoD Supplier Performance Risk System (SPRS), focusing on item, price, and supplier risk. Quotations are due by October 19, 2026, with a required delivery timeline of 90 days. The contractor must adhere to strict quality and technical standards, including ISO 9001 or SAE AS9100 quality management systems and NCSL Z540.3 or ISO 10012 calibration standards. Because the item is a CSI, any variance requests must be classified as major and require a contract modification prior to acceptance. Packaging and marking must comply with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for domestic and overseas shipments. Administrative requirements include electronic invoicing through the Wide Area Workflow (WAWF) system and compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

SERVOCYLINDER — 6615016516038 — SPRPA127QRA14

Solicitation # SPRPA1-27-Q-RA14

DLA Aviation at Philadelphia, acting for the Department of the Navy, issued solicitation SPRPA1-27-Q-RA14 on October 8, 2026, for the procurement of a servocylinder (NSN 6615-01-651-6038). This item is designated as a Critical Safety Item (CSI), and the procurement is categorized as a small business-small purchase under NAICS 334511. Quotations are due by October 23, 2026, with a required delivery timeline of 365 days. The contract is FOB Destination, though FMS deliveries are FOB Origin. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Past performance will be evaluated using the DoD Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. Technical requirements include compliance with ISO9000 or equivalent quality management systems and strict adherence to MIL-STD-2073, MIL-STD-129, and MIL-STD-130 for packaging, marking, and identification. All payment requests and receiving reports must be processed electronically via the Wide Area Workflow (WAWF) system. Inspection and acceptance will occur at the origin.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

DEADLINE

TORQUE TUBE ASSEMBL — 1680013538351 — SPRPA127QZA15

Solicitation # SPRPA1-27-Q-ZA15

Solicitation SPRPA1-27-Q-ZA15 is a request for quotations issued by DLA Aviation at Philadelphia for the procurement of Torque Tube Assemblies, identified by NSN 1680-01-353-8351 and part number 123CS11939-507. This is a spare buy only procurement set aside for small businesses and is being conducted under Emergency Acquisition Flexibility Authority. Quotations are due by October 19, 2026, with a required delivery timeline of 90 days. The government intends to make a single award based on the most advantageous offer, explicitly stating that past performance is considered more important than price. The contract mandates strict adherence to military standards, including MIL-STD-2073-1 for packaging, MIL-STD-129 for marking, and MIL-STD-147 for palletization. Inspection and acceptance will occur at the origin. Contractors must utilize the Wide Area Workflow system for electronic invoicing and payment requests. Key regulatory requirements include compliance with Buy American and Balance of Payments programs, safeguarding of covered defense information per DFARS 252.204-7012, and the provision of Material Safety Data Sheets for any hazardous materials delivered. No drawings are available for this solicitation.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

SWITCH,ELECTRONIC — 5895017288246 — SPRPA127QZA09

Solicitation # SPRPA1-27-Q-ZA09

Solicitation SPRPA1-27-Q-ZA09, issued on October 8, 2026, by DLA Aviation at Philadelphia for the Department of the Navy, is a fixed-price request for five electronic shelf-life switches (NSN 5895-01-728-8246). The contract requires delivery within 90 days on an FOB Destination basis. Award will be made to a single, technically acceptable offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important than price. The government will utilize the Supplier Performance Risk System to assess item, price, and supplier risks. Strict adherence to military standards is required, including MIL-STD-2073 for packaging, MIL-STD-129 for marking, and MIL-STD-130 for unique item identification. Specific packaging mandates include 1.5 inches of cushioning between the barrier bag and unit container, and a requirement that at least 85 percent of the Navy shelf-life remains upon receipt. Inspection and acceptance will occur at the origin. Contractors must use the Wide Area Workflow system for invoicing and payment requests. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, the Buy American program, and hazardous material identification.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Authorized Distribution of Aircraft Valve SupportsThis subcontract involves the supply of aircraft valve supports, specifically NSN 2840-01-497-3776 KF, for prime contractors supporting DLA Aviation projects under the Department of the Navy. The selected provider is responsible for procuring these components from approved manufacturers and managing all logistics to ensure FOB Destination delivery within a 90-day timeframe. Performance will take place in Philadelphia, with a response deadline set for November 6, 2026. To ensure compliance, the contractor must provide full provenance documentation and adhere strictly to MIL-STD-2073 and MIL-STD-129 standards. A critical requirement for the submission is the inclusion of an authorized distributor letter printed on the approved source's official letterhead. Final deliverables consist of the specified aircraft components and the necessary authorization letters.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Manufacturing of Aircraft Valve Supports (NSN 2840-01-497-3776 KF)This subcontract involves the manufacturing of aircraft valve supports under NSN 2840-01-497-3776 KF for prime contractors supporting DLA Aviation projects. The work is managed by the Department of the Navy through the Pa DLA Aviation office in Philadelphia. The selected provider must be a government-approved source of supply capable of utilizing precision machining and aerospace-grade materials to fabricate components. Strict adherence to quality and logistics standards is required, including the implementation of ISO 9000 quality systems and compliance with MIL-STD-2073 and MIL-STD-129 for packaging and marking. Finished supports are to be delivered FOB Destination. The response deadline for this opportunity is November 6, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Aerospace Component Calibration and CertificationThis subcontract for Aerospace Component Calibration and Certification supports prime contractors on DLA Aviation turret projects through the Department of the Navy. The selected provider will perform independent calibration and quality certification, specifically focusing on sensor-sight alignment and the verification of Critical Safety Item specifications. All work must be conducted using aerospace metrology tools and NIST-traceable calibration equipment, with the final delivery consisting of detailed calibration reports and Quality Certification documents. The project is based in Philadelphia and requires the contractor to hold AS/EN/JISQ 9100 certification. Interested parties must respond by October 14, 2026, regarding this opportunity which falls under NAICS code 541380.

Testing Laboratories and Services

POSTED

DEADLINE

Supply of Specialized Shipping Containers (B145-014809218)This subcontract involves the supply of specialized shipping containers, specifically model B145-014809218, to support prime contractors on DLA Aviation turret projects. Managed by the Department of the Navy through the Pa DLA Aviation office in Philadelphia, the contract requires the delivery of certified containers engineered for shock and vibration protection. All deliverables must strictly adhere to military packaging and marking standards MIL-STD-2073 and MIL-STD-129. The procurement falls under NAICS code 322214 and is centered in Philadelphia, Pennsylvania. Interested parties must note the response deadline of October 14, 2026, following the posting date of October 7, 2026.

Fiber Can, Tube, Drum, and Similar Products Manufacturing

POSTED

DEADLINE

Precision Machined Turret HousingThis subcontract for the Department of the Navy, managed by DLA Aviation in Philadelphia, involves the manufacture of structural housing and mechanical chassis for turret projects. The selected contractor will be responsible for the precision milling and turning of aerospace-grade titanium or aluminum, ensuring strict adherence to CAI tolerances and the application of necessary environmental surface treatments. To qualify, providers must possess AS/EN/JISQ 9100 certification and have access to specialized equipment, including 5-axis CNC mills and precision grinding machinery. The final deliverable consists of finished turret housings and chassis produced under NAICS code 332710, with performance taking place in Philadelphia.

POSTED

DEADLINE

MIL-STD-2073-1 Packaging and MarkingThis subcontract involves providing specialized military preservation, packaging, and marking services for prime contractors supporting DLA Aviation projects. The scope of work requires strict adherence to MIL-STD-2073-1 and MIL-STD-129 standards to ensure all items are properly prepared for military acceptance. This process includes the use of military-grade materials such as vapor-barrier bags, desiccants, and specialized crates as dictated by the specific Method of Preservation. The project is managed under the Department of the Navy for the Pa DLA Aviation office in Philadelphia, with performance taking place in Philadelphia, Pennsylvania. Interested parties should note the response deadline of November 6, 2026. The contract falls under NAICS code 488510 and focuses on delivering fully compliant, marked shipments ready for final military delivery.

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Towed Body Assembly (NSN 5895-01-164-4202 ZW)This subcontract, issued by the Department of the Navy via DLA Aviation in Philadelphia, requires the procurement or manufacture of one Towed Body Assembly under NSN 5895-01-164-4202 ZW. The selected provider must be a government-approved source of supply or an authorized distributor capable of utilizing aviation-grade materials and specialized assembly tooling. All work must adhere to ISO 9000 quality control standards to ensure the assembly meets strict technical requirements for prime contractors. The contract is categorized under NAICS code 336413, with the place of performance located in Philadelphia. The final deliverable is one completed Towed Body Assembly delivered FOB Destination. Interested parties must submit their responses by the deadline of November 6, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS