This Solicitation opportunity from New Hampshire was posted on August 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SERVICE BODY, CRANE, AND LIFT GATE (SUPPLY AND INSTALL)

Closed

9cbb43fb-fd06-4759-83fb-fe15eb77714dState & Local

Submission Closed08/12/2026, 02:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Naval Information Warfare Systems

POSTED

DEADLINE

16' Box Truck Body Fabrication and InstallationThis subcontract involves the fabrication and installation of a 16 foot aluminum box body for vehicle projects benefiting the Blue Valley Unified School District 229. The technical specifications require the installation of 2 inch nominal flat pine flooring supported by 3 inch I-Beam crossmembers, Utiliplate sidewalls with bonded seams, an aluminum bulkhead featuring a Shindog Door, and a 72 inch roll-up rear door. The final deliverable is a fully upfitted 16 foot aluminum box truck that strictly adheres to ICC regulations and Federal Motor Vehicle Safety Standards. This project falls under NAICS code 336212, with a response deadline set for October 28, 2026.

Blue Valley School District

POSTED

DEADLINE

18' Walk-In Step Truck Body Fabrication and InstallationThis subcontract involves the fabrication and installation of a specialized 18-foot walk-in body for vehicle projects benefiting the Blue Valley Unified School District 229. The scope of work includes the delivery of a fully upfitted mail delivery truck equipped with dash-mounted worktables, a translucent roof, LED lighting, and a 48,000 BTU heater and defroster. Additionally, the contractor is responsible for fitting backup cameras and rear grated step bumpers. All work must strictly adhere to ICC regulations and Federal Motor Vehicle Safety Standards to ensure legal and operational compliance. The project is categorized under NAICS code 336212, with a response deadline set for October 28, 2026.

Blue Valley School District

POSTED

DEADLINE

Dump Body Fabrication and Installation (2-3 Ton)This subcontract agreement involves the fabrication and installation of dump bodies for prime contractors supporting Kneehill County vehicle procurement projects. The scope of work requires the installation of a complete dump body assembly and hydraulic lift systems onto provided 2-3 ton regular cab and chassis units featuring dual rear wheels, culminating in the delivery of a fully completed dump truck. The project is managed by Kneehill County under NAICS code 336212. Interested parties must submit their responses by the deadline of November 20, 2026, following the posting date of October 16, 2026.

POSTED

DEADLINE

Medium Duty Crew Cab 4x4 Dump Truck SupplierThis subcontract opportunity is for the supply and delivery of two new medium-duty crew cab 4x4 trucks for the Town of Newmarket. The selected provider must be an authorized dealer or manufacturer capable of integrating 12-foot dump boxes onto the chassis and delivering the fully operational vehicles F.O.B. Destination. The solicitation was posted on October 16, 2026, with a response deadline of November 13, 2026. This project falls under NAICS code 336212 and is intended for prime contractors managing vehicle procurement projects for the municipality.

POSTED

DEADLINE

Supply of ALS-Equipped Polaris/ASAP CartsThis subcontract agreement involves the procurement or leasing of two specialized medical utility vehicles, specifically ASAP or Polaris carts or equivalent models, to support prime contractors on Jefferson Parish Government parade projects. These vehicles must be capable of transporting medical personnel and equipment through crowd-dense environments and must meet all standard vehicle safety certifications to ensure they are functional and medical-ready upon delivery. The opportunity is managed by the Jefferson Parish Government in Louisiana under NAICS code 336212. Interested parties must submit their responses by the deadline of October 29, 2026, following the posting date of October 16, 2026.

Jefferson Parish Government

POSTED

DEADLINE

Secure Transport Vehicle Modification and SupplyThis subcontract, titled Secure Transport Vehicle Modification and Supply, involves the provision and configuration of vehicles designed for the secure transport of inmates for prime contractors working on City of Indianapolis and Marion County projects. The scope of work includes modifying vehicle interiors to ensure physical separation between agents and passengers, installing specific partitions for male, female, and juvenile populations, and integrating necessary safety equipment to deliver fully configured, turn-key transport solutions. All vehicles must strictly adhere to DOT and FMCSA safety standards to ensure legal and operational compliance. This opportunity is managed by the Purchasing Division of Indiana under NAICS code 336212. The solicitation was posted on October 16, 2026, with a response deadline set for November 5, 2026.

POSTED

DEADLINE

IFB #26039-073.28 - Hydraulic Lowering Utility Trailers

Solicitation # 49267

The New York State Thruway Authority is soliciting bids from qualified contracting firms to supply hydraulic lowering utility trailers. These trailers are intended for operational use across the Authority's divisions located in Albany, Buffalo, New York City, and Syracuse. This solicitation, identified as IFB #26039-073.28, was posted on October 16, 2026, with a response deadline of October 21, 2026. The procurement falls under NAICS code 336212 and is managed by the Procurement Services division of the New York State Thruway Authority.

New York State Thruway Authority - Procurement Services

POSTED

DEADLINE

Lowboy Trailer SupplierThis subcontract opportunity is for the supply of a heavy-duty lowboy trailer to support prime contractors on equipment procurements for the Bureau of Indian Affairs. The required unit must meet or exceed TrailKing TK110HDG specifications, featuring a 110,000 lb capacity concentrated in 12 feet, three 25,000 lb axles, and an air-ride suspension system with adjustable ride height. The selected supplier is responsible for delivering one fully operational trailer to Fort Thompson, South Dakota. This procurement is designated as an Indian Small Business Economic Enterprise set-aside under NAICS code 336212. The solicitation was posted on October 16, 2026, with a response deadline of October 30, 2026. The contract falls under the jurisdiction of the Department of the Interior.

Bureau Of Indian Affairs

POSTED

DEADLINE

23--TANDEM AXEL CARGO TRAILER W/ BAY DOORS

Solicitation # 140GG027Q0003

Solicitation 140GG027Q0003 is a total small business set-aside request for quotation issued by the USGS Anchorage for the procurement of one enclosed tandem axle cargo trailer to serve as a mobile shop and storage unit. The trailer must meet strict technical specifications, including a minimum dimension of 8'x14' with at least 7' of internal headroom, a GVWR of 9,500 lbs, and an internal payload capacity of approximately 6,800 lbs or more. Key requirements include locking bay doors on the rear for forklift loading, internal tie-downs for loads exceeding 4,000 lbs, LED brake lights, and a roof load rating specifically designed to withstand Alaskan snow loads. The procurement is governed by the lowest priced technically acceptable criteria and requires the product to be manufactured in the USA by an American business in accordance with Buy American regulations. Offerors must be active in the System for Award Management and provide their Unique Entity Identifier with their quote. Submissions must include the country of manufacture, estimated delivery date, and FOB destination shipping costs. Quotes are due by October 22, 2026, and must be submitted electronically to the Contracting Officer. Payment for the award will be processed through the Department of the Treasury's Invoice Processing Platform.

Usgs Contracting Activity

POSTED

DEADLINE

Lowboy Trailer for Crow Creek Agency GPRO

Solicitation # 140A0127Q0055

The Bureau of Indian Affairs, under the Department of the Interior, is soliciting quotes for a lowboy trailer to support the Crow Creek Agency in the Great Plains Region. This procurement is a 100 percent set-aside for Indian Small Business Economic Enterprises (ISBEE), requiring a signed and completed IEE Representation Form for eligibility. The government seeks a commercial product, specifically a TrailKing TK110HDG or equivalent, featuring a capacity of at least 110,000 lbs concentrated in 12 feet, three 25,000 lb axles with air-ride and adjustable ride height, and a hydraulic detachable non-ground-bearing gooseneck. Additional specifications include a deck length of at least 25 feet 9 inches, a 102 inch deck width, approximately 24 inch loaded deck height, 8 inch ground clearance, 31 inch front loading ramps, and Apitong or Oak raised decking. The trailer must also include a hydraulic power wet kit, LED lights, and DOT electrical components. The contract will be awarded as a Firm-Fixed-Price purchase order, with delivery required within 60 days after receipt of the order to the BIA Crow Creek Agency in Fort Thompson, South Dakota. Evaluation is based on the ability to meet or exceed the technical specifications and administrative compliance, including the submission of a valid Unique Entity ID and the IEE Representation Form. Invoicing must be processed electronically through the U.S. Department of the Treasury's Invoice Processing Platform (IPP) and is subject to approval and acceptance by the Government Contracting Officer's Representative. The solicitation is governed by FAR Subpart 12.6 for commercial products and includes standard clauses regarding the Buy American Act and restrictions on certain foreign purchases.

Bureau Of Indian Affairs

POSTED

DEADLINE

Zero-Emission School Bus SupplierThis subcontract agreement establishes a partnership for the supply or lease of zero-emission school buses to support prime contractors working on Seattle Public Schools projects. The scope of work requires the delivery of a fleet consisting of Type A and Type C buses that strictly adhere to statutory zero-emission requirements and comply with all Washington state and federal safety standards. A critical component of the contract is the mandate for accessibility, requiring all vehicles to meet ADA Title II and Section 508 standards, including the installation of wheelchair lifts. Interested parties must submit their responses by November 12, 2026, to provide these qualifying vehicles for the district's transportation needs.

Seattle Public Schools

POSTED

4 days ago

DEADLINE

in 24 days

AI Contract Overview

This state-level procurement solicitation by the New Hampshire Department of Administrative Services (DAS) seeks a vendor to supply and install a service body, crane, and lift gate on a Ford F-350 chassis. The scope of work includes the installation of a 1,500-lb capacity aluminum liftgate and a 3,200-lb capacity wireless crane, both featuring specific technical requirements such as electric hydraulic pumps, 360-degree rotation, and specialized coatings like LINEX. All equipment must meet manufacturer specifications or approved equivalents and comply with the Worker's Right to Know Act (RSA 277-A). The project is designated as FOB Destination, with the vendor performing the installation at their own location and the state managing vehicle transport. The contract is awarded based on a Lowest Price Technically Acceptable (LPTA) methodology, where the primary evaluation factor is the total cost, provided the vendor meets all technical specifications and responsibility requirements. Bids must be submitted electronically by August 12, 2026, and the final delivery and installation must be completed by October 31, 2026. Key administrative requirements include providing SAM.gov or DUNS registration, maintaining general liability and workers' compensation insurance, and offering a warranty of at least one year. Payments are processed via ACH following state inspection and acceptance of the equipment.