This Government Contract opportunity from Mississippi was posted on August 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Sewer Condition Assessment Using CCTV, Sonar, and Laser Profiling

Closed

State & Local

Submission Closed08/24/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

DIBBS

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Third-Party Dimensional Inspection and CertificationThis subcontract for Third-Party Dimensional Inspection and Certification supports the DLA Weapons Support Aviation Supply Chain by providing independent quality assurance and dimensional verification for prime contractors. The scope of work focuses on verifying Class 3A and 3B threads in accordance with System 22 of FED-STD-H28/20, utilizing sampling plans based on MIL-STD-1916 or ASQ H1331. The selected provider must operate out of an ISO 9001 or SAE AS9003 certified facility and possess the necessary precision gauging tools to deliver detailed inspection reports and certifications of conformance. The project is categorized under NAICS code 541380 and will be performed in Cherry Point. Interested parties should note the response deadline of October 30, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Specialized Materials Testing Laboratory (Production Lot Test)This subcontract opportunity is for a Specialized Materials Testing Laboratory to perform Production Lot Testing for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider will execute tests according to procurement note E04 to verify the performance standards and material properties of torpedo components, with a specific focus on chemical testing for Otto Fuel compatibility. All work will be performed in Bremerton, Washington, and requires the delivery of formal test reports and certifications of compliance. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certifications and may require JCP certification to access necessary technical data. This requirement falls under NAICS code 541380. Interested parties must submit their responses by November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aviation Component Quality Inspection & CertificationThe Aviation Component Quality Inspection and Certification subcontract involves providing independent quality assurance and non-conformance testing for prime contractors supporting the DLA Weapons Support ASC. The selected provider will perform rigorous inspections using calibrated micrometers and CMM equipment in accordance with MIL-STD-1916 or ASQ H1331 to ensure zero-nonconformance. Additionally, the contractor is responsible for validating that all marking and packaging meet MIL-STD-129 and MIL-STD-2073-1E standards, ultimately delivering detailed quality inspection reports and certifications of conformance. To be eligible, contractors must hold AS9100 or ISO 9001 certifications and maintain CMMC Level 2 compliance. This opportunity is issued by the Department of Defense under NAICS code 541380. Interested parties must submit their responses by October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Thermal Cycling and Environmental Validation TestingThis subcontract for Thermal Cycling and Environmental Validation Testing involves performing environmental stress testing for prime contractors on DLA supply contracts. The scope of work requires validating the performance of observation windows across a temperature range of -55°C to 65°C, executing at least 100 cycles over a two-hour period using environmental test chambers. The testing must verify structural integrity and clarity in accordance with Navy drawing 1582AS124, culminating in the delivery of certified test reports for 18 units. The project is managed under the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Due to the nature of the technical data handling involved, the contractor must maintain CMMC Level 2 certification. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 2, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected contractor will perform Production Lot Testing for prime contractors on DLA supply contracts to verify the dimensions and material properties of machine thread bushings. All testing must be executed using specialized metrology and testing equipment in strict accordance with government standards, culminating in the delivery of a certified Production Lot Test report. The performance of this contract will take place in New Cumberland, Pennsylvania. Key compliance requirements include maintaining CMMC Level 2 certification and coordinating directly with government inspectors for destination acceptance. Interested parties should note the response deadline of October 30, 2026, for this opportunity categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing and Quality ValidationThis subcontract for First Article Testing and Quality Validation supports the DLA Weapons Support Land Supply Chain by providing initial validation and quality testing for prime contractors. The selected provider is responsible for producing two units for government testing at Robins Air Force Base in Georgia and generating detailed inspection reports for 402 MXSG/MXRILL. The project requires the use of precision measurement and test equipment RT001 and strict adherence to FAR 52.209-4 compliance standards. The final deliverables include the two test units and formal Factory Acceptance Test approval documentation. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Test (FAT) and Certification ServicesThis subcontract involves providing specialized testing and certification services for the DLA Weapons Support Active Devices Division. The primary objective is to conduct First Article Testing on a single prototype unit to ensure full compliance with MIL-DTL-24231/2E standards. The selected provider must utilize precision measurement and testing equipment and perform quality assurance inspections following either ASQ H1331 or MIL-STD-1916 sampling methods. The project deliverables include the return of the tested First Article Testing unit and a comprehensive First Article Test Report. Performance will take place in Tracy, California, under NAICS code 541380. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Third-Party Aerospace Quality Inspection and CertificationThis subcontract for Third-Party Aerospace Quality Inspection and Certification supports prime contractors on DLA Weapons Support ASC projects in Tracy, California. The selected provider will perform independent verification and inspection of critical flight hardware, utilizing attribute and variable inspection per MIL-STD-1916 and sampling plans per MIL-STD-105/ASQ Z1.4 to ensure zero non-conformance. All measurements must be conducted using calibrated CMM and NIST-standard tools, with the final delivery consisting of detailed inspection reports and Certificates of Conformance. To qualify for this engagement, the contractor must maintain ISO 9001:2015 or SAE AS9003 certification. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. Interested parties must submit their responses by the deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Third-Party Quality Assurance and Material TestingThis subcontract for Third-Party Quality Assurance and Material Testing supports the Department of Defense DLA Weapons Support ASC Commodities Division. The selected provider will perform independent sampling and testing of manufactured collars for prime contractors, with work performed at Robins Air Force Base. The scope of work involves conducting inspections based on MIL-STD-1916 or ASQ H1331 standards to verify critical, major, and minor attributes according to AQL requirements. Technical execution requires the use of specialized equipment, including CMM, hardness testers, and destructive testing tools. To qualify, the contractor must hold ISO 9001 or AS9100 certification and is responsible for delivering comprehensive inspection reports and quality certification documents. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Testing (PLT) for Torpedo ComponentsThis subcontract involves performing production lot testing for torpedo components to support prime contractors under the DLA Weapons Support Land Supply Chain. The primary objective is to validate that manufactured O-rings meet the quality and specifications outlined in the DIA Master List of Technical and Quality Requirements. This process utilizes aerospace and defense grade elastomer testing equipment to ensure all components adhere to strict industry standards. The selected provider will be responsible for delivering formal test reports and certifications of compliance for specific National Stock Numbers. Performance for this contract is centered in Bremerton, Washington, under NAICS code 541380. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Quality Inspection and Testing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days

AI Contract Overview

This subcontract opportunity, issued by MPTAP in Mississippi, involves performing comprehensive condition assessments of gravity-fed trunk sewer interceptors. The selected contractor will utilize CCTV, sonar, and laser profiling technologies to detect structural defects, identify sources of inflow and infiltration, and evaluate overall capacity issues within the sewer system. The solicitation was posted on August 10, 2026, with a response deadline of August 24, 2026. This project falls under NAICS code 541380, focusing on specialized surveying and mapping services to ensure the integrity and efficiency of the regional sewer infrastructure.

General Info

MPTAP seeks a contractor for CCTV and sonar assessments of Mississippi sewer interceptors.

Agency

Mississippi → MPTAP

NAICS

541380 - Testing Laboratories and Services

Place of Performance

MS, USA

Set-Aside

NONE

Documents

This scope was carved out of 3170036443.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

The City of Gulfport (Owner) will accept sealed statements of qualifications from qualified firms for professional engineering services in connection with the Citywide Sewer Interceptor Assessment and Implementation Project. To be considered, all rep

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 10

subcontract

Response DeadlineAug 24

Deadline has passed

Submission Closed

08/24/2026, 06:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyMississippi → MPTAP

ContactsNo contacts available

OfficeN/A

Organization / AgencyMississippi → MPTAP

Office AddressN/A

ContactsNo contact information available

Full Description

Conduct condition assessment of gravity-fed trunk sewer interceptors using CCTV, sonar, and laser profiling to identify structural defects, inflow and infiltration sources, and capacity issues.