This Pre-Solicitation opportunity from Department Of Defense was posted on February 16, 2010. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Sewing Machines

Closed

H92239-10-R-0007Federal

Submission Closed02/25/2010, 04:59:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 423830

New

SLED

Firefighting Equipment and Accessory SupplyThe Firefighting Equipment and Accessory Supply subcontract, issued by the Walker County Board of Commissioners in Georgia, involves providing loose and mounted firefighting equipment for prime contractors working on Walker County Fire Rescue apparatus projects. The scope of work includes the supply and installation of an ISO complement of ladders, hard suction hoses, masterstream devices such as deck guns, and SCBA cylinders. All provided equipment must strictly adhere to ISO standards and NFPA requirements to ensure safety and operational compliance. Interested parties should note that the response deadline for this opportunity is November 24, 2026.

Walker County Board of Commissioners

POSTED

DEADLINE

Ventrac Mower Parts and Supplies VendorThe Ventrac Mower Parts and Supplies Vendor subcontract involves providing genuine or approved replacement parts to prime contractors for State Military Department projects located at the Birmingham Air Guard. The scope of work includes the procurement and delivery of essential maintenance items such as tires, spark plugs, engine oil, lubricants, drive and mower belts, air, fuel, and oil filters, batteries, and mower blades. All supplied materials must strictly adhere to the specifications detailed in the Ventrac Service Manual. This opportunity is associated with the Alabama Air MCA App 21B Facilities Operations and Maintenance Agreement under NAICS code 423830. The solicitation was posted on October 21, 2026, with a response deadline of October 28, 2026. The selected vendor is responsible for the timely delivery of all requested parts and materials directly to the facility.

Air MCA App 21B_Facilites Operations & Maintenance Agreement, State Military Department

POSTED

DEADLINE

Breathing Air Compressor Parts SupplierThe Breathing Air Compressor Parts Supplier subcontract involves providing essential replacement parts, filters, lubricants, and consumables for prime contractors working on West Midlands Fire and Rescue Authority projects. The scope of work includes the delivery of high-pressure valves, seals, gaskets, and OEM or approved equivalent filtration elements for oil, air, and carbon. A critical requirement of the contract is ensuring that all supplied materials strictly adhere to safety and purity standards necessary for human respiration. Managed by the West Midlands Fire and Rescue Authority under NAICS code 423830, the contract requires the supplier to deliver all specified parts and consumables directly to designated authority sites. Interested parties must submit their responses by the deadline of November 27, 2026.

West Midlands Fire and Rescue Authority

POSTED

DEADLINE

Kubota Mower Parts and SuppliesThis subcontract involves the procurement of genuine or approved replacement parts and consumables to support prime contractors on State Military Department projects at the Birmingham Air Guard. The scope of work requires the delivery of OEM or approved equivalent components, including tires, spark plugs, oil, belts, filters, batteries, and blades, specifically compatible with Kubota Model Z012111 and Model F3990 according to Kubota Service Manual specifications. Managed under the Alabama Air MCA App 21B Facilities Operations and Maintenance Agreement, the contract falls under NAICS code 423830. Interested parties must adhere to the response deadline of October 28, 2026, to provide the necessary supplies directly to the designated government site.

Air MCA App 21B_Facilites Operations & Maintenance Agreement, State Military Department

POSTED

DEADLINE

Obsolete Parts Resolution and Sourcing SpecialistThis subcontract opportunity, titled Obsolete Parts Resolution and Sourcing Specialist, involves the procurement of obsolete electronic components and materials to support prime contractors on US Air Force C-5 Digital Computer projects. The selected provider will be responsible for identifying alternative sources to address diminishing manufacturing sources and material shortages, ensuring that all replacement parts maintain the original quality, form, fit, and function. Deliverables include the replacement components themselves along with necessary certifications of equivalence. Managed by the Department of Defense under agency FA8538 Afsc Pzaab, the contract requires strict compliance with DFARS 252.204-7012. The work is to be performed in Warner Robins, Georgia, under NAICS code 423830. Interested parties must submit their responses by the deadline of November 20, 2026.

POSTED

DEADLINE

Supplier of Haskel Booster System Model #80512This subcontract involves the procurement of one Haskel Booster System Model 80512 to support prime contractors on NASA Shared Services Center projects. The selected supplier is responsible for providing the specific hardware along with a Certificate of Conformance to ensure the system adheres to all manufacturer specifications. The equipment and accompanying certification must be delivered to Building 2204 at the Stennis Space Center in Mississippi. This requirement falls under NAICS code 423830 and is managed through the National Aeronautics And Space Administration.

NASA Shared Services Center

POSTED

DEADLINE

Supply of Bulk Accessory KitThis subcontract involves the supply of Bulk Accessory Kits (NIIN 011000312) for prime contractors working on DLA Mechanicsburg aviation projects. The contractor is responsible for sourcing and kitting hardware in accordance with TDP Version No. 016, ensuring that all materials used are new and unissued. Strict adherence to military standards is required, specifically MIL-STD-129 for marking and MIL-STD-2073-1 for packaging. Additionally, the provider must maintain CMMC compliance and furnish all necessary Safety Data Sheets. The opportunity is categorized under NAICS code 423830 and is managed by the Department of Defense.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Authorized Distribution of Aviation Receiver-TransmittersThis subcontract, titled Authorized Distribution of Aviation Receiver-Transmitters, involves the procurement and supply of six newly manufactured receiver-transmitters for prime contractors supporting DLA Aviation supply contracts. The selected provider must procure new spares directly from approved original equipment manufacturers and provide official Authorized Distributor Letters on OEM letterhead to verify authenticity and sourcing. Operational requirements include the use of secure aviation component warehousing and access to the Wide Area Workflow system for administrative processing. The contractor is responsible for coordinating all shipping to designated DODAAC addresses in strict accordance with TAC2 protocols. This effort is managed under the Department of Defense through the Pa DLA Aviation office in Philadelphia under NAICS code 423830.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

ICCP System Materials SupplierThis subcontract, managed by DAS Procurement for the state of Connecticut, establishes a supplier for specialized Impressed Current Cathodic Protection hardware used in water storage tank projects for the Department of Correction. The selected supplier is responsible for the procurement and delivery of critical components, including new rectifiers, mixed metal oxide rope anode assemblies, magnetic mount reference electrodes, and underwater gland seals. All provided materials must strictly adhere to NACE/AMPP SP0388 and AWWA D104 industry standards. The contract specifies that all ICCP hardware components are to be delivered F.O.B. Destination to prime contractors. Interested parties must submit their responses by November 4, 2026, in accordance with the solicitation posted on October 21, 2026. The procurement falls under NAICS code 423830, focusing on the specialized supply of industrial hardware for state infrastructure maintenance.

POSTED

DEADLINE

Spill Clean-up Equipment and Supplies ProviderThis subcontract opportunity is for a Spill Clean-up Equipment and Supplies Provider to support prime contractors working on liquid waste transport projects for Butte County Public Works. The selected provider will be responsible for supplying essential spill containment and clean-up materials, including absorbent materials, booms, pads, and specialized containment equipment for vacuum hose connections. A primary requirement of the contract is the delivery and maintenance of fully stocked, compliant spill response kits kept on-vehicle to ensure adherence to environmental regulations. The project is based in Paradise, California, and falls under NAICS code 423830. Interested parties must submit their responses by the deadline of October 26, 2026. This engagement focuses on maintaining strict environmental safety standards during the transport of liquid waste within the jurisdiction of Butte County.

Butte County Public Works

POSTED

DEADLINE

Elevator Replacement Parts SupplierThe Elevator Replacement Parts Supplier subcontract involves providing specialized replacement parts and components to prime contractors working on municipal projects for the Town of Dracut, Massachusetts. The scope of work includes the delivery of OEM or approved equivalent cables, rollers, control board components, buttons, and sensors to various service locations. All supplied materials must strictly adhere to manufacturer specifications and established safety standards. This opportunity is managed by the Town Hall agency under NAICS code 423830, with performance taking place in Dracut. The solicitation was posted on October 21, 2026, and requires a response by November 4, 2026.

POSTED

DEADLINE

Dock Leveler Parts SupplierThis subcontract agreement establishes a partnership for the supply of replacement parts and components for dock levelers at Fort Indiantown Gap, supporting prime contractors on projects for the Pennsylvania Department of Military and Veterans Affairs. The scope of work includes the provision of essential hardware such as hydraulic cylinders, springs, lip assemblies, seals, and electronic controls. To ensure accurate cost-plus verification, the supplier is required to deliver itemized original parts invoices alongside the requested components. Operational compliance requires that all personnel entering the facility undergo mandatory criminal background checks. The contract is categorized under NAICS code 423830, with a response deadline set for November 4, 2026. The primary objective is the timely delivery of specified parts and corresponding documentation to maintain facility infrastructure.

Department of Military and Veterans Affairs

POSTED

about 16 hours ago

DEADLINE

in 13 days

General Info

Agency

Department Of Defense → Hq Usasoc Contracting

NAICS

423830 - Industrial Machinery and Equipment Merchant Wholesalers

Place of Performance

See Desciption above., NC, USA

Set-Aside

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedFeb 16

Presolicitation

Response DeadlineFeb 25

Deadline has passed

Submission Closed

02/25/2010, 04:59:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Hq Usasoc Contracting

Contacts1 person available

OfficeFORT BRAGG, NC, 28310-5200, USA

Organization / AgencyDepartment Of Defense → Hq Usasoc Contracting

Office AddressFORT BRAGG, NC, 28310-5200, USA

Contacts

Stephen D. CoseyContracting Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

The Government intends to release a solicitation in the next 30 days for the following: (17 ea)* Sewing Machine, Industrial: General Sewing: 301 Stitch; Light Duty, must use thread size A and E, with the ability to stitch 7 to 11 stitches per inch, with fabric puller. The sewing machine shall be noise/vibration absorbing; which will include a table, table stand, motor, foot pedal, automatic lubrication and reverse feed. (Consew 7360R or equivalent) (26 ea)* Sewing Machine, Industrial: General Sewing: 301 Stitch; Light Duty, must use thread size A and E, with the ability to stitch 7 to 11 stitches per inch. The sewing machine shall be noise/vibration absorbing; which will include a table, table stand, motor, foot pedal, automatic lubrication and reverse feed. (Consew 7360R or equivalent) (19 ea) Sewing Machine, Industrial: Zig-Zag: 308 Stitch; Heavy Duty, must use thread size E, with the ability to stitch 7 to 11 stitches per inch and 42 stitches per inch, width of stitch shall be 3/16", with special piping foot. The sewing machine shall be noise/vibration absorbing; which will include a table, table stand, motor, foot pedal, large bobbin, wide Zig-Zag reverse feed, automatic lubrication and reverse feed. (Consew 146RB-2A-1 or equivalent) (35 ea) Sewing Machine, Industrial: Zig-Zag: 308 Stitch; Medium Duty, must use thread size E and FF, with the ability to stitch 7 to 11 stitches per inch and 42 stitches per inch, width of stitch shall be 3/16" with special piping foot. The sewing machine shall be noise/vibration absorbing; which will include a table, table stand, motor, foot pedal, large bobbin, horizontal axis transverse rotary hook, reverse feed, automatic lubrication and reverse feed. (Consew 199RB-2A-1 or equivalent) (14 ea) Sewing Machine, Industrial: General Sewing: 301 Stitch; Heavy Duty, must use thread size 3, 5 and E; with the ability to stitch 5 to 8 stitches per inch and 4 to 6 stitches per inch, with 30 inch arm. The sewing machine shall be noise/vibration absorbing; which will include table stand, motor, foot pedal, centralized arm lubrication, reservoir-piled hooks with micrometric control valve, presser foot locking lever, reverse feed, safety clutch, front hand wheel. Ability to convert between 1 and 2 needle operation. (Consew 745R-30 or equivalent) (17 ea) Sewing Machine, Industrial: General Sewing: 301 Stitch; Medium Duty, must use thread size E and F; with the ability to stitch 7 to 11 stitches per inch. The sewing machine shall be noise/vibration absorbing; which will include a table, table stand, motor, foot pedal, centralized arm lubrication, reservoir-piled hooks with micrometric control valve, adjustable reverse feed, locking stitch regulator, and safety clutch. (Consew 206RB5 or equivalent) (19 ea) Sewing Machine, Industrial: Darning Lock Stitch; must use thread size A and E, with the ability to stitch 7 to 11 stitches per inch. The sewing machine shall be noise/vibration absorbing; which will include a table, table stand and motor. (Consew 207 or equivalent) (18 ea) Sewing Machine, Industrial: General Sewing: 301 Stitch; Light-Heavy Duty, must use thread size 5 and E; with the ability to stitch 5 to 8 stitches per inch and 7 to 11 stitches per inch, with 25" long arm. The sewing machine shall be noise/vibration absorbing; will include a table, table stand, motor, foot pedal, centralized arm lubrication, reservoir-oiled hooks with micrometric control valve, large horizontal axis rotary hook and bobbin, adjustable reverse feed, locking stitch regulator, front hand wheel and safety clutch. (Consew 206RBL-25 or equivalent) (24 ea) Sewing Machine, Industrial: 301 Stitch; double needle, must use thread size 5 and E, with the ability to stitch 7 to 11 stitches per inch, with raw edge right hand binder. The sewing machine shall be noise/vibration absorbing will include a table, table stand, motor, foot pedal, centra-lube, semi-automatic lubrication system, large vertical axis Hooks and bobbins, reverse feed, drop feed, needle feed, and alternating (walking) presser foot and safety clutch. (Consew 339RB-3 or equivalent) (20 ea) Sewing Machine, Industrial: Bartack/Box X; must use thread size E and F, with Box X clamp. Ability to 56 to 72 stitches per inch. The sewing machine shall be noise/vibration absorbing will include a table, table stand, motor, computer-controlled, high-speed, bartacking machine. The machine shall have electric thread tension control. The machine must be able to perform as a Bartack and Box X apparatus. The sewing machine shall be programmable to a minimum of 30 different Bartack/Box X formations. In addition the machine shall have the capability to insert 15 different stitch patterns into the program: (Juki LK-1900AHS or equivalent) Stitch per Inch Stitch Width X Length 56-72 3/16 X 3/16 Box X with Box X Clamp 56-72 3/8 X 3/4 Box X with Box X Clamp 28 1/8 X 1 1/8 28 5/8 X 3/16 42 1/8 X 5/8 42 1/8 X 3/4 42 1/8 X 1 42 1/8 X 1 1/4 42 1/8 X 7/8 42 1/8 X 1/2 56 1/8 X 1/2 56 1/8 X 1 1/4 56 1/8 X 1 1/8 56 1/8 X 7/8 56 1/8 X 5/8 (1 ea) Sewing Machine, Industrial: 301 Stitch; Heavy Duty Cylinder Arm, single needle drop feed, needle feed, walking foot, alternating presser feet lockstitch machine. Diameter of cylinder bed shall be 3 7/32". The sewing machine shall be noise/vibration absorbing will include table, table stand, motor, centra-lube, semi-automatic lubrication system, vertical axis rotary hook, reverse feed and safety clutch. (Consew 287RB or equivalent) (1 ea) Sewing Machine, Industrial: Zig-Zag: 308 Stitch; Heavy Duty, must use thread size E, with the ability to stitch 7 to 11 stitches per inch and 42 stitches per inch, width of stitch shall be 3/16", with 20 inch arm. Needle size shall be 135 X 17. The sewing machine shall be noise/vibration absorbing; which will include a table, table stand, motor, foot pedal, large bobbin, wide Zig-Zag reverse feed, automatic lubrication and reverse feed. (Consew RBL-2A-1 with 20 inch Arm or equivalent) (1 ea) Sewing Machine, Industrial: Overlock High Speed Double Needle with a needle gauge of 4.8. Shall have a needle-tread take-up mechanism; maximum speed of 7000 rpm; cartridge type oil filter and cooling fan; differential-feed micro-adjustment mechanism and an external adjustment mechanism for adjusting the feed dog inclination and increasing the differential feed ratio. The sewing machine shall be noise/vibration absorbing; which will include a table, table stand, motor, foot pedal. (Juki MO-6745S-ED4 or equivalent) (1 ea) Sewing Machine, Industrial: Computer-controlled, high-speed shape-tacking machine with a sewing area of 60 mm(L) X 100 mm (W). Shall have a high presser foot lift, double-capacity shuttle hook. Maximum sewing speed of 2,500 rpm. Shall be able to create linear, spline, arc, and circular stitches; create various types of zigzag stitches, offset stitches, double-forward stitches, automatic back-tuck, condensation stitches and overlapping stitches. The sewing machine shall be programmable to a minimum of 600 patterns, arrangement of move, copy, erase and symmetry functions and data can be input using function numbers on a control box. The sewing machine shall be noise/vibration absorbing; which will include a table, table stand, motor. (Juki 1930 series or equivalent) Stitch per Inch Stitch Width X Length 56-72 3/16 X 3/16 Box X with Box X Clamp 56-72 1 1/2 X 1 1/2 Box X with Box X Clamp 56-72 3/4 X 1 1/2 double row Box X with Box X Clamp 56-72 3/8 X 1 1/8 3-point WW with Clamp 56-72 1 1/2 X 4 4-point WW with Clamp 56-72 1 3/8 X 1 7/8 4-point WW with Clamp Delivery Schedule: 1. Fort Bragg, North Carolina (June 2010) 33 Sewing Machines 2. Fort Lewis, Washington (June 2010) 34 Sewing Machines 3. Fort Benning, Georgia (July 2010) 11 Sewing Machines 4. Hunter Army Airfield, Georgia (July 2010) 14 Sewing Machines 5. Fort Carson, Colorado (July 2010) 14 Sewing Machines 6. Fort Campbell, Kentucky (July 2010) 21 Sewing Machines 7. Birmingham, Alabama (August 2010) 13 Sewing Machines 8. Jackson, Mississippi (August 2010) 7 Sewing Machines 9. Camp Blanding (Stark), Florida (August 2010) 7 Sewing Machines 10. Camp Williams (Salt lake City), Utah(August 2010) 14 Sewing Machines 11. Ogden, Utah (August 2010) 11 Sewing Machines 12. Watkins, Colorado (September 2010) 7 Sewing Machines 13. Camp Dawson, West Virginia (September 2010) 11 Sewing Machines Training Requirements: Supplier shall provide basic sewing machine mechanic techniques. Supplier must have experience training individuals as sewing machine mechanics. Prior to training an outline of training will be provided to this office for approval. Minimum training requirements are: 1. Set timing on all machines. 2. Daily, weekly, and monthly preventive maintenance checks and services (PMCS). 3. Lubrication requirements per machine 4. Set-up of programmable sewing machine (Bartack and Box X or equivalent). Individual should be able to program any required stitch formation needed to accomplish a task according to the applicable Technical Manual. Ensure trained individual understands how to operate the machine to efficiently change between the 15 different stitch formations. 5. Special attention to setting the timing on the Sewing Machine, Industrial: General Sewing: 301 Stitch; Heavy Duty. Going from a 2 needle operation to a 1 needle operation and vice versa. 6. Training shall be conducted directly after set-up is complete. Training sites and maximum number of personnel to be trained: 1. Fort Bragg, North Carolina (12 PAX) 2. Fort Lewis, Washington (12 PAX) 3. Fort Benning, Georgia (9 PAX) 4. Hunter Army Airfield, Georgia (9 PAX) 5. Fort Carson, Colorado (6 PAX) 6. Fort Campbell, Kentucky (12 PAX) 7. Birmingham, Alabama (12 PAX) 8. Camp Williams, Utah (12 PAX) 9. Camp Dawson, West Virginia (9 PAX) Additional Requirements: 1. Supplier shall install and set-up all sewing machines upon arrival at the designated facilities. 2. Supplier shall present an optional cost to provide maintenance and repairs for years 2-5. 3. Supplier shall follow the delivery priority and time line. Earlier arrival is authorized.