Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

SHAFT, DRIVE

Active
SPE7L3-27-T-1635Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7L3-27-T-1635 is a request for quotations issued by the DLA Weapons Support Land Supplier Opns Vehicle Spt for the procurement of seven drive shafts, identified by NSN 3040-99-723-4318 and part number 2A058-0395. The required delivery date is August 16, 2027, with a delivery window of 276 days after receipt of order. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, where both inspection and acceptance will take place. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. It explicitly prohibits the use of Class I ozone-depleting chemicals and requires compliance with the Buy American Act and the Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Key regulatory clauses are incorporated, such as DFARS 252.204-7012 for cybersecurity and safeguarding covered defense information, as well as various FAR sections regarding equal opportunity and hazardous material identification. Quotations were due by November 12, 2026.

General Info

DLA request for seven drive shafts for delivery to Pennsylvania by August 2027.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

333613 - Mechanical Power Transmission Equipment Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT
Office AddressUSA
Contacts
Karen McCarley
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHAFT,DRIVE
SHAFT,DRIVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
IPECO HOLDINGS LIMITED K9075 P/N 2A058-0395
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018861627 0001 EA 7.000
NSN/MATERIAL:3040997234318
DELIVERY (IN DAYS):0276
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7L3-27-T-1635
SECTION B
PR: 7018861627 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GB CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:08/16/2027 Original Required Delivery Date:08/16/2027
SPE7L3-27-T-1635 NSN/Part Number: 3040-99-723-4318 Quantity: 7 EA Purchase Request: 7018861627QTY: 7 Delivery: 276 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
Webbing Strap Supplier (NSN 5340-14-553-5890)This subcontract involves the supply of seven specialized webbing straps for prime contractors supporting Department of Defense Land and Maritime supply contracts. The supplier is responsible for manufacturing or sourcing the straps in strict accordance with NSN 5340-14-553-5890 and the DLA Master List of Technical and Quality Requirements. Key compliance mandates include adherence to the Berry Amendment for domestic textile sourcing and MIL-STD-130N for property identification. The work is associated with the Land Supply Chain agency and will be performed at Robins Air Force Base.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-27-T-1774
Solicitation SPE7L1-27-T-1774 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of one straight shaft, identified by NSN 3040012578753 and Parker-Hannifin Corporation part number 905892. This critical application item is required to be delivered FOB Destination to the USNS Leroy Grumman (T AO 195) at FPO AE 09570. The required delivery date is October 16, 2026, with a specified delivery lead time of 20 days. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E for packaging, RP001 for palletization, and MIL-STD-129 for marking. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, per NAVSEA 5100-003D. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Offerors must comply with the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Notably, the government will not evaluate offers utilizing additive manufacturing unless specifically authorized. Quotations were due by October 30, 2026, and should be submitted via DIBBS.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L1-27-T-1770
Solicitation SPE7L1-27-T-1770 is a fixed-price request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of two shoulder pump shafts. The required items, identified by NSN 3040010333054 and Sauer-Danfoss part number 3102211, are intended for use on Air Force Type AS32MK3 Bomb Lifts, Model 69J51566-1. This is a Foreign Military Sales requirement for Turkey, with the final shipping destination located in Kayseri, TR, via a freight forwarder in Secaucus, NJ. The contract mandates a delivery period of 20 days after order, with an original required delivery date of October 22, 2026. Inspection and acceptance will occur at the point of origin. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, and palletization must follow DLA requirement RP001. Notably, parts produced using additive manufacturing processes are ineligible for award. Compliance requirements include adherence to the Buy American Act and the Berry Amendment, with specific disclosure required for non-domestic materials. The contractor must utilize the Wide Area Workflow system for electronic invoicing and payment requests. Key regulatory clauses are incorporated, including DFARS 252.204-7012 for safeguarding covered defense information and various FAR sections governing fixed-price supply contracts and equal opportunity employment.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 333613
New
DIBBS
GEARSHAFT, FACE
Solicitation # SPE4A6-27-T-5819
Solicitation SPE4A6-27-T-5819, issued by the DLA Weapons Support ASC Commodities Division on October 23, 2026, is a request for quotations for 14 units of Face Gearshafts, identified by NSN 3040003173199 and Honeywell Aerospace US LLC part number 365083-1. This procurement falls under NAICS code 333613 and is not a small business set-aside. The required delivery date is January 27, 2028, with a need ship date of April 20, 2027, and a delivery timeline of 171 days after order. Shipping is FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill at Hill AFB, Utah. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Key compliance requirements include CMMC Level 2 Self-Assessment, adherence to the Buy American and Balance of Payments Program, and registration via the Account Management and Provisioning System to access the Vendor Shipment Module. Payment requests and receiving reports must be processed electronically through Wide Area Workflow. Quotes must be submitted via the DIBBS system and may not include parts made using additive manufacturing unless specifically authorized.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 333613
New
DIBBS
GEAR CLUSTER, ANTI-BACK
Solicitation # SPE7L4-26-T-6998
Solicitation SPE7L4-26-T-6998, issued by DLA Land and Maritime for Combat Vehicles and Armament, is for the procurement of three anti-backlash spur gear clusters. This critical application item is identified by NSN 3020-01-223-0927 and part number CN00012 from Roller Bearing Co of America, Inc. The required delivery date is June 2, 2027, with a delivery period of 246 days after order. Shipping is FOB Origin, while inspection and acceptance will take place at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 Self-Assessment and the safeguarding of covered defense information. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. All payment requests and receiving reports must be processed electronically through Wide Area WorkFlow. Offerors must comply with the Buy American Act and the Berry Amendment, and all quotes are to be submitted via the DLA Internet Bid Board System.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 333613
New
Federal
High Precision Inline Helical Planetary Gearbox FabricationThis subcontract involves the fabrication of 10 custom high-precision inline helical planetary gearboxes for prime contractors supporting DLA Maritime projects in Bremerton. The scope of work requires the production of PS Series Custom PS90-050-S2 gearboxes according to specific manufacturer and Olympus Controls part numbers. Technical modifications include the integration of stainless steel screws, the machining of thru-holes on output shafts, and a strict no lubrication configuration. The project is managed under NAICS code 333613 for the Department of Defense. To ensure security and regulatory adherence, the contractor must maintain compliance with NIST SP 800-171 standards and the Buy American Act. The final deliverable consists of 10 fully modified gearboxes meeting all specified technical requirements.
DLA Maritime - Puget Sound

POSTED

2 days ago

DEADLINE

in 21 days
View Details
NAICS: 333613
New
Federal
CUSTOM GEARBOX
Solicitation # SPMYM227Q1115
Solicitation SPMYM227Q11150001 is a total small business set-aside for the procurement of 10 custom high precision inline helical planetary gearboxes (PS Series Custom PS90-050-S2) for the DLA Maritime Puget Sound. This urgent requirement is a firm fixed price contract with a requested delivery date of November 20, 2026, shipped FOB Destination to the Puget Sound Naval Shipyard in Bremerton, Washington. The award will be granted to the technically acceptable offeror most advantageous to the government, based on a combination of unit price and past performance as evaluated via the Supplier Performance Risk System. To be considered responsive, bidders must submit a signed and completed solicitation via email to the primary point of contact, Karl Lindley, by September 28, 2025, at 7 AM. Key requirements include compliance with NIST SP 800-171 for non-COTS items, adherence to ASTM-D-3951 for commercial packing, and MIL-STD-130 for unique item identification. Invoicing must be processed electronically through Wide Area Workflow. The solicitation incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and specific safeguarding requirements for covered defense information.
DLA Maritime - Puget Sound

POSTED

2 days ago

DEADLINE

in 21 days
View Details
NAICS: 333613
New
DIBBS
Bevel Gearshaft Manufacturing (NSN 3040007880240)This subcontract involves the manufacture of 14 high-precision bevel gearshafts under NSN 3040007880240 for the TF-33 Aircraft Engine, supporting DLA supply contracts. The work is managed by the Department of Defense through the DLA Weapons Support Land Supply Chain and will be performed at Tinker AFB. Production must strictly adhere to Drawing NR 77445 410906, Revision F, utilizing precision CNC machining and gear grinding. Due to the nature of the components, the contractor must comply with Air Force Critical Safety Item standards and RQ009 inspection requirements. Mandatory qualifications include Government engineering source approval and CSI certification to ensure all delivered gearshafts meet rigorous safety and quality specifications.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
MIL-SPEC Waterproof Packaging for O-RingsThis subcontract involves providing specialized packaging services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work focuses on the delivery of O-rings sealed in medium duty, waterproof, greaseproof, and opaque bags. All packaging must strictly adhere to MIL-DTL-117, Type II, Class C, Style 1 and MIL-STD-2073-1E packaging data requirements. The project is associated with NAICS code 333613 and will be performed at Tinker AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors delivering supply contracts for the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The scope of work involves the professional packing, marking, and palletization of shipments using industrial equipment and MIL-SPEC materials. All activities must strictly adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 DLA Packaging Requirements for palletization, including the application of hazardous labels in accordance with DFARS 252.223-7001. The performance of these services will take place in New Cumberland, Pennsylvania, with the final objective of delivering shipments ready for transport to San Diego, California. The opportunity is categorized under NAICS code 333613, with a response deadline set for November 9, 2026.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
Supply of Machine Screws (NSN 5305-00-054-4471)This subcontract involves the supply of 3,352 machine screws for prime contractors under the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The required components must meet NSN 530500054471 and Type I, Class 2S specifications for Slotted Flat Head screws with an 82 degree angle, plus or minus 2 degrees. Performance will take place in Bremerton, Washington, with delivery coordinated through the First Destination Transportation program. Eligible providers must maintain an active CAGE code and SAM registration to participate. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026. This procurement falls under NAICS code 333613.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 333613
New
DIBBS
Preformed Mechanical Felt FabricationThis subcontract involves the fabrication of 29 units of preformed mechanical felt for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Ops. The manufacturing process must strictly adhere to TDP Rev B Gen 2 and Basic Drawing NR 13873 RE-016523257 Revision D. Performance will take place in New Cumberland, Pennsylvania. To qualify for this project, the manufacturer must hold ISO 9001:2015 certification and FAA Airworthiness Approval. Additionally, all delivered components must feature IUID marking in compliance with MIL-STD-130. The solicitation was posted on October 29, 2026, with a response deadline of November 5, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 423830
New
DIBBS
Supply of Cylinder Slave (NSN 2590-01-495-7218)This subcontract involves the procurement and delivery of one Cylinder Slave, part number 53.0300.1000, for prime contractors supporting DLA Weapons Support projects. The required components are sourced from Terex Cranes Germany GmbH and must be delivered FOB Origin. The contractor is required to adhere to strict Department of Defense standards, including Item Unique Identification per MIL-STD-130, marking and labeling per MIL-STD-129, and packaging guidelines per ASTM D3951 and RP001. All deliverables must comply with the DLA Master List of Technical and Quality Requirements.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
Supply of Preformed Packing (NSN 5330-01-721-0524)This subcontract involves the manufacture or sourcing of 750 units of preformed packing, specifically part number 5330-01-721-0524, for the DLA Weapons Support Land Supplier Opns Vehicle SPT. The components must be of domestic origin and packaged in medium duty, waterproof, greaseproof, opaque bags in strict accordance with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1 standards. The contractor is required to hold US/Canada Joint Certification Program certification to be eligible for this project. Performance will take place in Tracy, California, under NAICS code 339999, supporting prime contractors within the Department of Defense.
All Other Miscellaneous Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 488510
New
DIBBS
International Military Packaging and Freight ServicesThis subcontract for International Military Packaging and Freight Services supports prime contractors under the DLA Weapons Support Land Supplier operations. The scope of work involves providing specialized military-grade packaging, loading, stowing, and bracing of equipment in strict accordance with ASTM D3951 and RP001 standards, with marking and labeling compliant with MIL-STD-129. The logistics component requires managing the international transport of materials to a bulk break point at Camp Zama, followed by final delivery to the Kyoga-Misaki Communication Site in Kyoto, Japan. This Department of Defense requirement falls under NAICS code 488510 and is managed by the DLA Weapons Support Land Supplier Office.
Freight Transportation Arrangement

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
Cylinder Tilt with Side Shift Assembly (NSN 2590-01-495-7222)This subcontract involves the procurement of one complete Cylinder Tilt with Side Shift assembly, identified by NSN 2590-01-495-7222, for prime contractors supporting the Department of Defense DLA Weapons Support Land Supplier operations. The assembly must be manufactured or procured in strict accordance with Terex Cranes Germany GmbH part number 53.0600.0800 specifications. Key compliance requirements include the implementation of IUID marking as mandated by MIL-STD-130 and DFARS 252.211-7003. Additionally, the provider is required to submit all necessary material certifications and process operation sheets to ensure quality and technical adherence. The opportunity is categorized under NAICS code 333999.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Gasket Supply (NSN 5330-01-677-5529)This subcontract involves the supply of 79 asbestos-free gaskets under NSN 5330-01-677-5529 for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The contractor is responsible for manufacturing or sourcing the gaskets according to technical drawings, conducting Product Verification Testing, and providing all necessary material certifications and process operation sheets. Strict adherence to military standards is required for the final delivery, including packaging in waterproof, greaseproof, opaque bags per MIL-DTL-117 and marking shipments according to MIL-STD-129 and MIL-STD-2073-1E. The performance of this contract is centered in New Cumberland, Pennsylvania, with the final delivery consisting of the 79 gaskets accompanied by the required certifications and drawings.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 333618
New
DIBBS
MANIFOLD, EXHAUST
Solicitation # SPE7L3-27-T-1042
Solicitation SPE7L3-27-T-1042 is a total small business set-aside issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of 81 exhaust manifolds, identified by NSN 2815-01-434-5184 and Renk America LLC part number E9AR108-0070. This critical application item is being acquired under the First Destination Transportation program with an original required delivery date of April 3, 2027, and a need ship date of April 6, 2027. Offers must be submitted via the DIBBS portal based on FOB Origin terms, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List and requires packaging and marking in accordance with MIL-STD-2073-1E and MIL-STD-129. Palletization must follow RP001 requirements. Administrative compliance includes electronic invoicing through the Wide Area WorkFlow system and adherence to various FAR and DFARS clauses, including those regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of covered defense telecommunications equipment. All hazardous materials must be labeled according to the Hazard Communication Standard.
Other Engine Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336370
New
DIBBS
BRACE, FENDER
Solicitation # SPE7L3-27-U-0023
Solicitation SPE7L3-27-U-0023 is a Total Small Business Set-Aside issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of fender braces, specifically NSN 2510015772396 and Daimler Truck North America LLC part number FLT 1600 15MA. This requirement is for a Unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and an estimated quantity of 33 units. Delivery is required within 41 days after order, with shipping terms set as FOB Destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List Technical and Quality Requirements taking precedence. Palletization must comply with RP001. Inspection and acceptance will occur at the destination. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Additionally, the contract mandates compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information.
Motor Vehicle Metal Stamping

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332999
New
DIBBS
GRILLE, RADIATOR, VEHICU
Solicitation # SPE7L3-27-U-0024
Solicitation SPE7L3-27-U-0024 is a total small business set-aside issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of vehicular radiator grilles, specifically Daimler Truck North America LLC part number A17-20035-000, NSN 2510-01-576-5277. The requirement is for an estimated quantity of 12 units under an Indefinite Delivery Contract with a maximum value of 350,000.00 dollars. Delivery is required within 41 days after receipt of order, with inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring palletization complies with DLA requirement RP001. Technical and quality requirements are governed by the DLA Master List, which takes precedence over general packaging standards. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation also incorporates various DFARS and FAR clauses regarding cybersecurity, the safeguarding of covered defense information, and domestic material restrictions under the Buy American Act.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336992
New
DIBBS
CYLINDER SLAVE
Solicitation # SPE7L3-27-Q-0086
Solicitation SPE7L3-27-Q-0086 is a small business set-aside request for a firm fixed price contract to procure one Cylinder Slave, identified as NSN 2590-01-495-7218 and Terex Cranes Germany GmbH part number 53.0300.1000. The procurement is managed by the DLA Weapons Support Land Supplier Operations Vehicle Support. Delivery is required within 52 days after receipt of order, with the final destination and inspection point located in Japan at the USALRCTR Camp Zama and the Kyogamisaki Communication Site. The contractor must adhere to strict technical and quality standards, including Item Unique Identification in accordance with MIL-STD-130 and the prohibition of Class I ozone depleting chemicals. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Award will be based on the best value, evaluating price, offered delivery, and past performance. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
HINGE, DOOR, VEHICULAR
Solicitation # SPE7L3-27-U-0026
Solicitation SPE7L3-27-U-0026 is a request for quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of vehicular door hinges, specifically Daimler Truck North America LLC part number WWS 50036-3420, NSN 2510015766278. This is a total small business set-aside under NAICS code 332999, intended to result in a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000.00 dollars. The estimated annual quantity is 9 units, though this is an estimate and not a guaranteed purchase. Quotations are based on price for the estimated annual demand and must be submitted via the DLA Internet Bid Board System. The contract requires delivery within 88 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements RP001, noting that the DLA Master List of Technical and Quality Requirements takes precedence. Environmental restrictions strictly prohibit the use of Class I Ozone Depleting Chemicals. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and equal opportunity.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7L3-27-T-1047
Solicitation SPE7L3-27-T-1047 is issued by the DLA Weapons Support Land Supplier Opns Vehicle SPT for the procurement of 192 feet of nonmetallic special shaped section seals, identified by NSN 5330-00-377-6524. The requirement allows for a quantity variance of plus or minus 10 percent, and offerors are encouraged to provide quantity ranges to accommodate demand volatility. Delivery is required within 104 days after receipt of order, with a designated delivery point at DLA Dist San Joaquin in Tracy, California. While the solicitation contains conflicting FOB terms, it explicitly instructs offerors to submit quotes based on FOB Origin. The contract mandates strict adherence to technical and security standards. Technical data is subject to export control under ITAR or EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed DLA export-control training. Security requirements include CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, specifically requiring items to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 326291
New
DIBBS
SEAL ASSEMBLY
Solicitation # SPE7L3-27-T-1050
Solicitation SPE7L3-27-T-1050 is a request for quotations from the DLA Weapons Support Land Supplier Ops Vehicle SPT for the procurement of 23 seal assemblies under National Stock Number 5330-01-180-2636. The items are to be delivered to the DLA Distribution Depot at Hill AFB, Utah, with a need ship date of June 7, 2027, and an original required delivery date of October 31, 2027. This is a restricted source item requiring engineering source approval by the Government Design Control Activity. To be eligible for award, offerors must possess an approved US/Canada Joint Certification Program certification and provide a Safety Data Sheet for any hazardous materials. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Because the items fall under Federal Supply Classifications 5330/5331 and are susceptible to UV deterioration, they must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. All supplied items must be free of asbestos. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. Quotes must be submitted via the DLA Internet Bid Board System.
Rubber Product Manufacturing for Mechanical Use

POSTED

2 days ago

DEADLINE

in 3 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS