Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SHAFT, SHOULDERED

Active
SPE7L2-26-T-0616Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 12 units of a SHAFT, SHOULDERED with NSN 3040-01-529-5127 under solicitation SPE7L2-26-T-0616, with a delivery deadline of 165 days after award. Full and open competition applies, and all technical and quality requirements referenced by R or I numbers must be sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition size. The item is subject to strict prohibitions on Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized by specification. Export control regulations under ITAR or EAR apply to associated technical data, restricting disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The contractor must adhere to tailored quality requirements, configuration change management via engineering change proposals, and inspection and acceptance at the manufacturer’s origin. Cybersecurity compliance requires CMMC Level 2 certification by a certified third-party assessment organization. Covered defense information is subject to RD002, and all government identification must be removed from non-accepted supplies. The place of performance is Tracy, California, with the primary point of contact being Shaun Sehgal of the Department of Defense’s Land Supplier Operations Wheeled Vehicles.

General Info

Procure 12 shrouded shafts, delivery in 165 days, CMMC Level 2, ITAR/EAR controlled, Tracy, California.

Agency

Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLESView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L2-26-T-0616 for DLA Land and Maritime Wheeled Vehicles

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES
View Agency Profile
Office AddressUS
Contacts
Shaun Sehgal
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHAFT,SHOULDERED
SHAFT, SHOULDERED
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
USE LATEST REVISIONS OF ALL SPECIFICATIONS AND STANDARDS
FULL AND OPEN COMPETITION APPLY
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be
SPE7L2-26-T-0616
SECTION B
exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3040-01-529-5127 Quantity: 12 EA Purchase Request: 7017775967QTY: 12 Delivery: 165 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
CLAMP, HUB
Solicitation # SPE7L1-26-T-947J
The contract pertains to the procurement of six CLAMP, HUB units under solicitation SPE7L1-26-T-947J, with a firm delivery deadline of 20 days after order placement. The acquisition is governed by stringent Department of Defense standards, including compliance with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, where the applicable revision is controlled by the solicitation issue date. Cybersecurity requirements mandate CMMC Level 2 certification through an approved Third-Party Assessment Organization, ensuring robust information protection practices. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Contractors must hold a valid US/Canada Joint Certification Program credential, complete mandatory DOD export control training, and receive explicit approval from DLA to access controlled data, with DFARS 252.225-7048 fully applicable. Additionally, government identification must be removed from any non-accepted supplies. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 333613. Point of contact is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
BREATHER
Solicitation # SPE7L3-26-T-168Y
This contract pertains to the procurement of one unit of item NSN 3040017239146, identified by part number 227-0590 manufactured by CATERPILLAR INC, under solicitation SPE7L3-26-T-168Y. The delivery is required within 20 days of award, with shipment to be delivered FOB origin and inspected and accepted at the destination. The item must comply with all DLA packaging requirements as specified in RP001 and MIL-STD-2073-1E, including packaging codes, materials, and marking standards per MIL-STD-129 with no special marking required. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes must be pre-approved unless explicitly authorized by specification. The item has no shelf life requirement. The delivery address is NMCB ONE at 477 MCKINNEY AVENUE, BLDG 200, GULFPORT MS 39501-5000, with a required shipment by the fastest traceable means—parcel post is prohibited. The purchase request number is 7017785989, and the unit of issue is EA with a total price of one dollar. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date. The contract is set for performance under a federal acquisition system, with the point of contact being Lee Miller at DLA, and the anticipated original delivery date is August 10, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
LEVER, MANUAL CONTROL
Solicitation # SPE7L1-26-T-944P
This contract is for the procurement of a manual control lever, identified by NSN 3040-00-330-3262 and purchase request 7017775854, with a total quantity of 51 units to be delivered FOB origin within 273 days. The item is classified as a restricted source item requiring government engineering source approval and is defined by multiple Army drawings and technical data packages, some of which specify chemical agent resistant coatings in lieu of original finish requirements. The contract enforces stringent quality and compliance standards, including adherence to MIL-STD-130N for identification marking, MIL-STD-2073-1E for packaging, and MIL-STD-1916 or equivalent zero-based sampling plans with zero non-conformances required for acceptance. All components must originate from qualified suppliers listed on approved Qualified Products Lists or Qualified Manufacturers Lists, and the use of ozone depleting chemicals is strictly prohibited. The product is designated a critical application item and must conform to ISO 9001:2015 and tailored higher-level quality requirements, with inspection and acceptance occurring at origin. The contract requires submission of a first article for approval, with specific packaging and marking instructions, including bold red “FIRST ARTICLE” labeling on the outer container and advance notice to the testing facility. Specialty metal regulations apply due to the nature of the item, and packaging must meet DLA requirements including preservation level, wrap materials, and palletization per RP001. This solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 333613, with a response deadline of August 20, 2026, and unit price set at $51.00 per unit with no variance allowed in quantity.
LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L3-26-T-169L
The contract specifies the procurement of a shaft with a shoulder, identified by NSN 3040-01-696-8685 and part number HAN8598-1, with a single unit quantity required for delivery within 20 days after contract award. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. All items must comply with MIL-STD-2073-1E packaging standards, including specific packaging methods, materials, and unit container codes, with marking conforming to MIL-STD-129 and no special marking applied. Palletization must adhere to DLA packaging requirements, and shipment must be sent via traceable freight methods—parcel post is explicitly prohibited. The delivery address is the Navy Logistics Center in Mechanicsburg, Pennsylvania, and the shipment is tracked under project ZNH TP 3 with a required delivery date of June 16, 2026. The contract explicitly prohibits the use or incorporation of Class I ozone-depleting chemicals and mandates that any substitute chemicals be submitted for approval unless already authorized by specification. Mercury and mercury-containing compounds are banned from intentional addition or direct contact with supplied hardware, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and certain chemical reagents approved by NAVSEA, with portable fluorescent lamps and instruments containing mercury requiring shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions determined by acquisition size and solicitation amendments. All terms are bound to the solicitation number SPE7L3-26-T-169L, issued under the DoD’s authorized unit of issue, with primary point of contact at DLA for inquiries.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIG
Solicitation # SPE7L3-26-T-169K
This contract is for a rigid connecting link with NSN 3040-41-000-2692 and part numbers 40009963 from General Dynamics Land Systems and Z002009-0 from Steyr Motors AG, requiring delivery of one unit within 20 days of contract award. The item must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required and palletization adherence to DLA packaging requirements. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The product has no shelf life limitation. Shipment must be sent to the Military Sealift Command at 9284 Balboa Avenue, San Diego, CA 92123-5000, with transportation protocols governed by DLA procedural notes C19 and C20. The contract is tied to solicitation SPE7L3-26-T-169K, with a required delivery date of August 5, 2026, and was posted on August 9, 2026, with a response deadline of August 20, 2026. The NAICS code is 333613, and the contracting office is under the Department of Defense’s Land Supplier Operations Vehicle Support, with point of contact Lee Miller at DLA.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE7L3-26-T-169S
This contract solicitation under SPE7L3-26-T-169S requires strict compliance with first article testing and production lot testing protocols for item NSN/Part Number 0001S00000061, with a quantity of 29 units and a delivery timeline of 684 days ADO. The contractor must test one unit of the specified item and submit a complete first article test report within 120 calendar days of contract award, providing written notice to the contracting officer and quality assurance representative at least 14 days prior to shipment for government final acceptance testing. The government will respond within 30 days of receiving the report with conditional approval, approval, or disapproval. Production lot testing follows first article approval and requires the contractor to supply two randomly selected samples from the production lot for government testing, with sample size subject to approval if the specified quantity is ZZ. The contractor must cover all costs associated with samples consumed or destroyed during testing and ensure all units are shipped to the designated DLA facility in Columbus, Ohio, via traceable means with proper labeling and documentation including signed DD Forms 1222 and 250, test results, certifications, drawings, and a prepaid return shipping label. All documentation must comply with MIL STD 129 and include proprietary rights assertions. The solicitation is restricted to Women-Owned Small Businesses and includes no Fast Pay provision, with testing and submission procedures governed by FAR 52.209-3 and associated supplemental requirements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-26-U-0560
The contract is a sole-source, small business set-aside indefinite-delivery contract under solicitation SPE7L1-26-U-0560 for the supply of 87 straight shafts identified by NSN 3040013270143 and part number 16-12373-000, issued by the Department of Defense’s Land Supply Chain under a total small business set-aside classification per FAR 19.5. The contract is governed by DLA’s Master List of Technical and Quality Requirements, which supersedes all other specifications including ASTM D3951, and requires all packaging and marking to align with MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement, including proper palletization and labeling with the correct Unit of Issue and Quantity per Unit Pack. Items must be delivered FOB origin within 127 days of delivery order issuance, with inspection and acceptance occurring at the destination; no quantity variance is permitted. The contract prohibits the inclusion of ozone-depleting chemicals, hexavalent chromium, and covered defense telecommunications equipment, and mandates compliance with cybersecurity standards including safeguarding covered defense information and reporting cyber incidents under DFARS 252.204-7012. Contractors are required to submit electronic invoicing via WAWF and provide UEI and CAGE codes, while adhering to affirmative representations regarding small business status and any prior provision of covered defense telecommunications equipment. The total contract ceiling is $350,000 with an estimated annual quantity of 87 units, and while the unit price is not stated, deliveries are non-firm and triggered by individual delivery orders. All packaging must comply with hazardous material labeling requirements under 29 CFR 1910.1200 and MIL-STD-129, and the contract includes clauses governing equal opportunity, combating human trafficking, employment eligibility verification, whistleblower rights, and restrictions on subcontracting for commercial items. Proposals must be submitted by August 24, 2026, via DLA’s DIBBS portal and cFolders for technical data, with primary point of contact Jennifer Payne at DLA.
LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
ACTUATOR, MECHANICAL, NO
Solicitation # SPE7L3-26-T-169P
This contract pertains to the procurement of a mechanical actuator with the NSN 3040-01-734-3067 and part number JE10612-101 from Juniper Elbow Co. Inc., requiring delivery of 15 units under solicitation SPE7L3-26-T-169P. The item is classified as a critical application item and must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, as identified by R or I numbers. The contract explicitly prohibits the use of Class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for permitted functional uses such as in batteries, fluorescent lights, sensors, controls, weapon systems, or specific chemical reagents authorized by NAVSEA; portable devices containing mercury must meet shock-proof and double-containment requirements per NAVSEA 5100-003D. All packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special codes applied. The units are to be delivered FOB origin, inspected and accepted at destination, with no variance allowed in quantity. The delivery deadline is 137 days from the contract award, with an original required delivery date of May 5, 2027, and a needed ship date of January 5, 2027. The consignee is DLA Distribution San Joaquin in Tracy, California, and transportation instructions follow DLAD Proc Notes C19 and C20. Item Unique Identification is not required per customer request, and the unit of issue is each, aligned with ANSI X12 standards.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
GEAR CLUSTER
Solicitation # SPE4A0-26-T-4217
The contract pertains to the procurement of a GEAR CLUSTER item with NSN 3020-00-916-3550 and part number 75331-2, supplied by HONEYWELL INTERNATIONAL INC., under solicitation SPE4A0-26-T-4217. Three units are required at a unit price of $3.00, for a total price of $9.00, with delivery due within five days FOB origin. Inspection and acceptance occur at the origin, and the quantity variance is strictly zero percent, meaning no overruns or underruns are permitted. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific preservation methods, packaging materials, and coding specified, and palletization must adhere to DLA packaging requirements. Marking is to follow standard guidelines without special codes. The item is designated as a critical application item with no shelf life requirement, and item unique identification is not mandated per customer request, with DFARS 252.211-7003(c)(1)(i) applying. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling protocols aligned to MIL-STD-1916 or ASQ H1331 Table 1, or comparable zero-based plans, where critical, major, and minor attributes are assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively. Documentation for source approval, cybersecurity compliance at CMMC Level 2, and removal of government identification from non-accepted supplies are required. Delivery is to be shipped to the Tainan Branch Warehouse in Taiwan, with freight details and forwarding instructions governed by DLAD procedural notices. The contract includes specific government-use codes and reference identifiers, and the required delivery date is set for September 11, 2024, with the solicitation issued on August 9, 2026, and responses due by August 17, 2026, under the NAICS code 333613 for mechanical power transmission equipment manufacturing.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L3-26-T-170C
The contract is for six straight shafts identified by NSN 3040-00-179-7113 under solicitation SPE7L3-26-T-170C, with a delivery deadline of 79 days after order. The item falls under NAICS code 333613 and is being procured by the Department of Defense through the Land Supplier Operations Vehicle Support office. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless amended. Export control regulations apply due to the presence of technical data subject to ITAR or EAR, prohibiting any export including disclosure to foreign persons without prior authorization from the Department of State or Commerce. Only authorized DLA contractors with JCP certification, completed training on handling DOD export-controlled data, and approved access through the DLA questionnaire may receive this technical data. The solicitation opened on August 9, 2026, and responses are due by August 20, 2026, with performance location in Anniston, Alabama, and primary point of contact listed as Karen McCarley.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
GEAR CLUSTER
Solicitation # SPE4A0-26-T-4218
This contract pertains to the procurement of a gear cluster identified by part number 75331-2 and NSN 3020-00-916-3550, with a single unit requirement to be delivered within five days from the origin. The item is designated as a critical application item with no shelf life requirement, and item unique identification is not mandated per the service customer’s request, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract, with applicable revisions tied to the solicitation or award date depending on acquisition size. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging codes and methods outlined, including dry preservation and designated unit and intermediate containers. Palletization follows DLA packaging standards and no special marking is required. Inspection and acceptance occur at origin, with zero nonconformances required in sampling under MIL-STD-1916 or comparable zero-based plans unless otherwise defined, and unspecified attributes are treated as major. The contract includes cybersecurity compliance obligations under CMMC Level 2 self-assessment and covered defense information directives. Delivery is to Tainan, Taiwan, via the Parts-Attach General Depot, with freight forwarding managed under DLA procedural notes. The contract is issued under solicitation SPE4A0-26-T-4218, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Aviation Supply Chain ESOc Buys office.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
CONTROL ASSEMBLY, PUSH-
Solicitation # SPE7L4-26-U-1069
The contract pertains to the procurement of eight units of a Control Assembly, Push-Pull, identified by NSN 3040-01-297-3396, under solicitation SPE7L4-26-U-1069, issued by the Department of Defense’s LSO Combat Vehicles and Armament office. The contract is structured as an indefinite-delivery contract with a minimum order of one unit and a total maximum value of $350,000, with no firm quantity commitments beyond that. Delivery is required within 127 days of award, with FOB Origin pricing and destination inspection and acceptance performed by the government. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, effective as of the award date, and include adherence to MIL-STD-2073-1E for packaging and preservation, and MIL-STD-129 for marking, labeling, and barcoding with IUID compliance for each item. Packaging must use preservation method 33 and material 49, with grease-barrier wrap and direct order containers. The contract imposes stringent compliance obligations, including prohibition of Class I ozone-depleting chemicals, which supersedes all specification requirements but does not diminish product performance expectations—any substitute chemicals require prior approval. Cybersecurity requirements mandate CMMC Level 2 certification for the contractor and a C3PAO assessment, along with full compliance with NIST SP 800-171 and DFARS 252.204-7012 for safeguarding covered defense information. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons without prior government authorization; access is limited to contractors holding approved US/Canada Joint Certification Program status, having completed DLA’s export-controlled data training and questionnaire. Contractors must also maintain active SAM registration, comply with employment eligibility and anti-trafficking requirements, and use WAWF for all invoicing and receiving reports. Additional obligations include submission of Safety Data Sheets for any hazardous materials, adherence to hazard communication standards, and compliance with DFARS 252.204-7018 on prohibited telecommunications equipment. Small business representations and socioeconomic certifications are required, including UEI and CAGE code disclosures. The contract allows for changes under FAR 52.243-1, pricing adjustments under 252.243-700
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES

Same awarding agency

NAICS: 541690
New
DIBBS
Export-Controlled Technical Data Management
Other Scientific and Technical Consulting Services

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541330
New
DIBBS
Technical Data Package (TDP) and Drawing Compliance Support
Engineering Services

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Precision Machining of Shoulder Shaft (NSN 3040015295127)
Precision Turned Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 238320
New
DIBBS
Painting and Coating ServicesThe contract for Painting and Coating Services encompasses comprehensive interior and exterior painting tasks, including priming, coating, and the application of specialty finishes to meet specified performance standards. All work must be performed at the designated place of performance in Tracy, California, with ZIP code 95304-5000, and is classified under NAICS code 238320, which pertains to painting and wall covering contractors. The solicitation is structured as a subcontract and was posted on August 5, 2026, with a response deadline of August 17, 2026. The contracting activity is linked to the Department of Defense through its organizational entity, Land Supplier Operations Wheeled Vehicles, indicating the work supports military or defense-related infrastructure needs. There is no set-aside designation specified, and the point of contact information is not provided in the posting. Interested parties must submit proposals via the official DIBBS portal using the solicitation number SPE7L226T0591.
Painting and Wall Covering Contractors

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 238350
New
DIBBS
Drywall and Acoustical Ceiling InstallationThe contract pertains to the installation of gypsum board walls and suspended acoustical ceiling systems for a Department of Defense project under the NAICS code 238350, classifying it as a subcontract for construction of building equipment. The work is scheduled to take place in Tracy, California, with a zip code of 95304-5000, and is being managed by the Land Supplier Operations Wheeled Vehicles division. The solicitation was posted on August 5, 2026, with bids due by August 17, 2026, indicating a twelve-day window for proposers to submit responses. The project does not specify a set-aside type or additional agency details beyond the parent department, and the point of contact information is not provided. Interested parties must access the solicitation through the DIBBS portal via the provided link to obtain full requirements and submission guidelines.
Finish Carpentry Contractors

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 238220
New
DIBBS
Fire Protection and Sprinkler System InstallationThe contract seeks a subcontractor to design and install comprehensive fire sprinkler systems, encompassing piping, sprinkler heads, alarm mechanisms, and standpipes, with all work to be performed at Tracy, California, with a ZIP code of 95304-5000. The solicitation is classified under NAICS code 238220, indicating it pertains to plumbing, heating, and air-conditioning contractors, and is issued by the Department of Defense under the organization name LAND SUPPLIER OPNS WHEELED VEHICLES. The opportunity was posted on August 5, 2026, and responses are due by August 17, 2026, with no set-aside provisions designated. All technical and operational requirements must align with fire protection standards as specified in the solicitation, and the successful bidder must be prepared to execute installation work at the designated location without deviation. The full details and submission guidelines can be accessed through the provided DIBBS portal link.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 238160
New
DIBBS
Roofing and Waterproofing ServicesThe contract awards subcontracted services for the installation of low-slope membrane roofing and waterproofing systems on above-grade building components at a facility in Tracy, California, with a zip code of 95304-5000. The work falls under NAICS code 238160, which classifies roofing contractors, and is issued under the Department of Defense as the overseeing agency through its Land Supplier Operations Wheeled Vehicles division. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, and is intended to be awarded as a subcontract rather than a direct government contract. The place of performance is clearly defined, and the contract involves specialized labor to ensure durable, weather-resistant roofing solutions critical for military or defense-supported infrastructure. All proposals must be submitted through the DIBBS platform using the provided reference number SPE7L226T0591, though no point of contact information is listed in the solicitation.
Roofing Contractors

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 332312
New
DIBBS
Structural Steel Fabrication and ErectionThe contract involves the fabrication and on-site erection of structural steel framing for a multi-story office building located in Tracy, California, with a ZIP code of 95304-5000. The work is classified under NAICS code 332312, indicating it is a subcontract for structural metal fabrication and erection services. Performance is required at the specified location, and all work must comply with federal standards applicable to Department of Defense projects. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, leaving a limited window for interested parties to submit proposals. The contracting agency is the Department of Defense under the organizational name LAND SUPPLIER OPNS WHEELED VEHICLES, suggesting this effort supports military or defense-related infrastructure development. The opportunity is open as a subcontract, meaning the successful bidder will likely work under a prime contractor to complete the structural steel components necessary for the building’s framework.
Fabricated Structural Metal Manufacturing

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 238220
New
DIBBS
HVAC System InstallationThe contract involves the installation of a comprehensive heating, ventilation, and air conditioning system, including all associated ductwork, chillers, boilers, and control systems. This subcontract is tied to a Department of Defense initiative under the agency name LAND SUPPLIER OPNS WHEELED VEHICLES, with performance required at a specified location in Tracy, California, zip code 95304-5000. The work falls under NAICS code 238220, categorizing it as building equipment contractors specializing in HVAC installation. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is accessible through the DIBBS platform. No set-aside classification has been designated, and no point of contact details are provided within the data.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 238110
New
DIBBS
Concrete Formwork and PlacementThe contract entails the complete formwork, reinforcement, and pouring of structural concrete for foundations, slabs, and elevated decks as part of a subcontract under the NAICS code 238110. Work is to be performed at a location in Tracy, California with a zip code of 95304-5000, and all activities must align with military construction standards set by the Department of Defense under the agency name LAND SUPPLIER OPNS WHEELED VEHICLES. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, requiring qualified subcontractors to submit proposals within this window. This subcontract is not set aside for any specific small business category and is open to all eligible contractors capable of delivering high-specification concrete placement services in compliance with defense requirements. Participation requires adherence to technical specifications for structural integrity, safety protocols, and schedule milestones tied to the broader construction projects managed by the military agency.
Poured Concrete Foundation and Structure Contractors

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems InstallationThe contract involves the installation of comprehensive plumbing and piping systems for a multi-story office building, encompassing water supply, drainage, waste, and vent piping. The work is classified under NAICS code 238220 and is structured as a subcontract, with the place of performance located in Tracy, California, specifically at zip code 95304-5000. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The contracting agency is the Department of Defense, operating under the organizational title LAND SUPPLIER OPNS WHEELED VEHICLES, indicating this project supports military or defense-related infrastructure needs. All work must comply with applicable plumbing codes and standards for commercial buildings, and performance is expected to meet the technical and safety requirements set forth by federal guidelines for defense-related construction projects.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 561730
New
DIBBS
Landscaping and Erosion ControlThe contract encompasses landscaping and erosion control services for a Department of Defense project, specifically including site landscaping, sod installation, erosion control measures, and temporary seeding. Work is to be performed in Tracy, California, with a zip code of 95304-5000, and is classified under NAICS code 561730, which pertains to landscaping services. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, indicating a narrow window for submission. This is a subcontract opportunity, meaning it is intended for vendors to provide services under a prime contractor rather than directly to the government. The agency responsible is LAND SUPPLIER OPNS WHEELED VEHICLES, operating under the broader Department of Defense structure. While no point of contact or set-aside details are provided, the location and scope suggest the work supports infrastructure or facility development requiring environmental compliance and aesthetic improvements.
Landscaping Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details