Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SHAFT, STRAIGHT

Active
SPE4A5-26-T-303CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a straight shaft identified by part number 392184-7 and NSN 3040-01-544-1203, with a quantity of 14 units to be delivered FOB origin in accordance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. The item is classified as a critical application item under Lockheed Martin Corp and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, indicated by R or I numbers. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stipulated, and attributes are to be classified with corresponding verification levels or AQLs. Packaging must adhere to DLA-specific guidelines including palletization and the use of specified preservation methods and materials, with no special marking required. Delivery is required within 171 days of order placement, with an original required delivery date of May 13, 2027, and a need ship date of January 17, 2027. The destination for delivery is the DLA Distribution San Joaquin facility in Tracy, California, with inspection and acceptance occurring at the destination. No quantity variance is permitted, and the unit price is $14.00 per unit for a total contract value of $196.00. The contract is issued under solicitation number SPE4A5-26-T-303C, with a response deadline of July 29, 2026, and is categorized under NAICS code 333613. Transportation instructions are governed by DLA procedural notes C19 and C20, and the unit of issue is EA as defined by DLA standards. The point of contact for the contract is Hope Scott of the Department of Defense’s ASC Supplier Operations OEM Division.

General Info

14 units of part 392184-7, $14 each, deliver to Tracy CA by Jan 17, 2027, FOB origin, MIL-STD compliant.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-303C.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Hope Scott
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHAFT,STRAIGHT
SHAFT,STRAIGHT
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
LOCKHEED MARTIN CORP 98897 P/N 392184-7
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017571590 0001 EA 14.000
NSN/MATERIAL:3040015441203
DELIVERY (IN DAYS):0171
SPE4A5-26-T-303C
SECTION B
PR: 7017571590 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:GB CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/17/2027 Original Required Delivery Date:05/13/2027
SPE4A5-26-T-303C NSN/Part Number: 3040-01-544-1203 Quantity: 14 EA Purchase Request: 7017571590QTY: 14 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGThe contract is for the procurement of a rigid connecting link with NSN 3040-01-453-7810 and part numbers 17B9F1112-551 from The Boeing Company and 4609-551 from Tyee Aircraft Inc, under solicitation SPE7L4-26-U-0984. The item is classified as a critical application component for military use and is subject to stringent technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. The contract specifies a quantity of 15 units at a unit price of $15.00, for a total value of $225.00, with zero variance allowed in quantity. Delivery is required within 259 days FOB origin, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-129 for marking and labeling, palletization must adhere to RP001 DLA Packaging Requirements, and all packaging must also meet ASTM D3951 unless overridden by the DLA Master List. The item is procured under DLA Direct CONUS coverage, and the unit of issue is each. The contract was posted on July 21, 2026, with proposals due by August 5, 2026, under NAICS code 333613, and is managed by the Department of Defense’s Combat Vehicles and Armament office, with Heather Kessler as the point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGThe contract is for the procurement of two rigid connecting links for the main landing gear of military equipment, identified by NSN 3040-00-001-3669, with a delivery requirement of 427 days after award. The technical specifications require adherence to SAE AMS-A-225 instead of QQ-A-225, surface roughness compliant with ASME B46.1, geometric tolerancing per ASME Y14.5, and marking in accordance with MIL-STD-130 in place of IM-8. Ozone-depleting chemicals are strictly prohibited, and any substitutions must be approved unless explicitly permitted by the specifications. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; only contractors with approved JCP certification, completed DLA training, and authorized access may receive the controlled data. Cybersecurity maturity is mandated at CMMC Level 2, and the contractor must comply with DLA’s packaging standards, tailored quality requirements, and configuration change management through formal engineering change proposals. Inspection and acceptance must occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. Full and open competition applies, with no set-aside, and all technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements in effect at the RFP issue date. The contracting activity is the Department of Defense, Land Supplier Operations Vehicle Support, with the point of contact listed as Karen McCarley, and performance is designated to Jacksonville, Florida.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
GEAR, SPECIAL
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
CASING, FLEXIBLE SHAThe contract pertains to the procurement of a flexible shaft casing assembly, identified by part number 10053603 and NSN 3040-01-525-0768, with a quantity of four units. The item is classified as a critical application item and is being procured under DLA Direct, CONUS coverage, with delivery required within 177 days FOB origin. The quantity is fixed with no variance allowed, and both inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence over this standard. All packaging and labeling must conform to MIL-STD-129, and palletization must adhere to the DLA Packaging Requirements for Procurement. The unit of issue is each, with a total contract value based on an estimated quantity, and the item is not guaranteed to be purchased by the IDC. The contract is issued under solicitation SPE7L3-26-U-0639, with a response deadline of August 5, 2026, and is classified under NAICS code 333613. The contracting office is the Department of Defense, Land Supplier Operations Vehicle Support, with Stephen Weaver as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
COLLAR, SHAFTThe contract is for the procurement of one collar, shaft with NSN 3040-01-658-5553 and part number 4325320 from OSHKOSH DEFENSE LLC, issued under solicitation SPE7L1-26-T-856M. The item must be delivered in a single unit within 121 days to the designated location in Albany, Georgia, under FOB origin terms, with no tolerance for quantity variance. All packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container specifications, while marking must adhere to MIL-STD-129 with no special marking codes required. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date based on acquisition size. Delivery must be directed to the DLA Distribution Management Office in Albany, Georgia, and the required delivery date is July 20, 2026, with a submission deadline for responses on August 3, 2026. The contract falls under NAICS code 333613 and is managed by the Department of Defense’s Land Supply Chain organization, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
BALL JOINTThe contract is for the procurement of a ball joint with NSN 3040-01-600-1867 and part number 2998K321 from McMaster-Carr Supply Co, under solicitation SPE7LX-26-U-8915, with a total quantity of 16 units at a unit price of $16.00, resulting in a total price of $256.00. The requirement is designated as a Total Small Business Set-Aside under NAICS code 333613, and delivery must be made within 49 days FOB origin with no tolerance for quantity variance. All items must be packaged and marked in strict compliance with MIL-STD-129 and ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence over any material standard. Inspection and acceptance occur at the destination point, and packaging must follow DLA’s Packaging Requirements for Procurement (RP001), including palletization standards. The U/I is EA and the QUP is specified as 001, meaning each unit pack contains one item. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. Primary point of contact is Theodore Misiolek, reachable via phone or email. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation issue date for simplified acquisitions. The item is covered under DLA Direct, CONUS, and the contract explicitly states that the estimated quantity may not be fully purchased by the IDC. All documentation and labeling must conform to the referenced standards and DLA directives without exception.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
BRAKE, BASEThis contract is for the procurement of 21 units of BRAKE, BASE with NSN 3040-01-165-4444 under solicitation SPE7LX-26-U-8900, a total small business set-aside classified under NAICS code 333613. The delivery is due within 99 days after contract award, with responses due by August 5, 2026. The specification incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions controlled by the solicitation issue date for simplified acquisitions. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The product must not contain any Class I ozone-depleting chemicals, and any substitutions require prior approval unless explicitly authorized by the specification. Inspection and acceptance are to occur at origin, and configuration changes must be managed through an Engineering Change Proposal with formal request for variance if deviations are necessary. Technical data associated with this item is subject to export controls under ITAR or EAR, with restrictions on disclosure to foreign persons both domestically and abroad, requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed required DLA training and questionnaires. The contracting office is the Strategic Acquisition Program Directorate within the Department of Defense, with Theodore Misiolek as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGIDThis solicitation, SPE7L1-26-T-859R, is a Women-Owned Small Business Set-Aside for 168 rigid connecting links with a delivery requirement of 505 days after award, under purchase request 7017440434. Offerors must comply with stringent domestic sourcing rules, including the Berry Amendment, Buy American Act, and applicable DFARS clauses, with a lowered Berry threshold of $150,000, requiring full disclosure of any non-domestic materials used. The use of additive manufactured parts is prohibited unless explicitly approved by the contracting officer, and any such proposal will be deemed ineligible for award. Offerors are strongly encouraged to provide quantity ranges in their quotes due to the unpredictable and fluctuating nature of procurement needs, as fixed quantities may lead to administrative inefficiencies unless under Auto IDC. A “No Bid” submission is required on DIBBS for those planning to quote after the closing date to avoid assumption of non-procurability. All offerors must represent that they will not supply covered telecommunications equipment or services prohibited under FAR 52.204-24 or DFARS 252.204-7016. Small business joint ventures must submit required certifications for eligibility under applicable set-aside categories. Contractors must register through DLA’s new Account Management & Provisioning System (AMPS) within two months to gain access to the Vendor Shipment Module, and those using VSM WebServices must implement schema updates by April 23, 2025, or lose shipping capability. Fast Pay is not applicable, and all submissions must be made via DIBBS with full compliance to the specified clauses and representations.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
RING, ROD, PISTONThe contract pertains to the procurement of 11 units of RING, ROD, PISTON with NSN 3040-01-348-1517 under solicitation SPE4A5-26-T-300M, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 171 days of award, with responses due by July 29, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment specifies a later revision. Packaging must comply with DLA procurement standards, and government identification must be removed from non-accepted supplies. Physical identification of bare items is required, though Item Unique Identification is not mandated per the Service customer's request. Export control provisions apply to technical data associated with this item, which is subject to ITAR or EAR regulations; disclosure to foreign persons, including foreign nationals within the U.S., is restricted and requires prior authorization. Access to this controlled data is limited to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and been approved by DLA. The place of performance is Tinker AFB, Oklahoma, and inquiries may be directed to Rasulbek Kilichev at the provided contact information.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
GEAR RACKThe contract pertains to the procurement of a single gear rack, part number 895-28365, manufactured by Moog Inc. for use in a hydraulic rotary actuator model FS-895, identified by NSN 3020-01-159-2738. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with any applicable R or I numbers governing specifications. The supplier must adhere to DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking needed. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components such as batteries, instruments, or weapon systems, and any permitted mercury-containing devices must meet Navy specifications for containment and shock protection. The supply must be shipped within 20 days of contract award, delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. Freight must be sent by the fastest traceable means, not parcel post, to the designated receiving facility at Silverdale, Washington, with all packaging palletized according to DLA requirements. Cybersecurity maturity model certification Level 2 self-assessment is required, and the contract mandates removal of government identification from non-accepted supplies. The required delivery date is July 17, 2026, with a solicitation response deadline of August 3, 2026.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHTThe contract specifies the procurement of one straight shaft, identified by NSN 3040-01-551-7822 and part number TYUW33008B, under solicitation SPE7L4-26-T-5734, with a required delivery within 20 days of contract award. The item must be delivered FOB destination, with no tolerance for quantity variance, and is subject to inspection and acceptance at the delivery point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit containerization, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and shipment must be made via traceable transport methods, explicitly prohibiting parcel post. The destination is the USS JOHN PAUL JONES DDG 53 at FPO AP 96669, with shipment reference RDD 777 and supplier identifier YNCG03. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, with revision control tied to the solicitation or award date depending on acquisition size. The contract enforces strict compliance with DoD unit of issue standards and mandates use of the DLA Vendor Shipping Module for logistics coordination. The original delivery deadline is July 16, 2026, and the point of contact is Anna-Rachelle Betts at DLA, with additional Federal use codes and administrative data applicable for internal tracking.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
RACK, PISTON, ACTUATOThe contract pertains to the procurement of a rack, piston actuator identified by NSN 3040-01-117-4775 and manufacturer part numbers 28916 and 895-28365 from MOOG INC. Only one unit is required, with a strict delivery requirement of 20 days from contract award, FOB origin, and no variance allowed in quantity. The item is classified as a critical application, subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which must be adhered to as of the solicitation or award date depending on acquisition size. The use of mercury or mercury-containing compounds is strictly prohibited unless explicitly exempted for functional components such as batteries, fluorescent lighting, sensors, or weapon systems, and even then, portable mercury-containing devices must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with specific preservation, marking, and palletization standards, and the item must be shipped via the fastest traceable means—parcel post is explicitly prohibited. Delivery is to be made to the receiving officer at Building 7000, Door 12, Silverdale, WA, with a required delivery date of July 17, 2026. The contract is issued under solicitation SPE7M4-26-T-271X, with a response deadline of August 3, 2026, and is administered by the Department of Defense’s Fluid Handling Division, with Blake Tushar as the point of contact.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336415
New
DIBBS
TAPE, DRIVE, RETICLEThe contract solicitation is for 178 units of TAPE, DRIVE, RETICLE with NSN 1430-01-318-3414, under solicitation number SPE4A5-26-T-302G, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. The requirement is governed by a suite of technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on the acquisition size. The item is subject to specific packaging standards, documentation mandates for source approval, and the mandatory removal of government identification from non-accepted supplies. Physical identification and marking of the bare item are required, though Item Unique Identification is not mandated per the service customer’s instruction. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals located in the U.S. or overseas, and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed mandatory DLA training on export-controlled data handling, and formal approval from the DLA controlling authority. Delivery is required within 171 days after award, with performance to occur in New Cumberland, Pennsylvania, 17070-5002. The solicitation closes on July 29, 2026, and the NAICS code is 336415. All correspondence and inquiries should be directed to Rasulbek Kilichev at the provided contact information.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
SEALING STRIPThe contract pertains to the procurement of a sealing strip with NSN 6610-00-126-6113 and part number 10201-004, under solicitation SPE4A5-26-T-303K, requiring delivery of 11 units within 333 days from the contract date, with delivery terms FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RP001 for packaging, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for physical identification and bare item marking. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must meet MIL-STD-2073-1E standards with specific preservation methods, materials, and unit containment as detailed, and marking must comply with MIL-STD-129 without special markings. Palletization adheres to DLA packaging requirements, and shipment is directed to the parcel post address in Tracy, California. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The contract specifies the unit of issue as each (EA), with a total price of $11.00, and identifies Hien-Van Trinh as the primary point of contact for the Department of Defense’s ASC Supplier Oper OEM Division.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333914
New
DIBBS
SHAFT ASSEMBLYThe contract pertains to the procurement of two shaft assemblies with NSN/part number 4320-00-731-6506 under solicitation SPE4A5-26-T-304G, issued by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required within 171 days after award, and the solicitation closes on July 29, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions. The supplier must comply with documentation obligations for source approval, cybersecurity requirements under CMMC Level 2, DLA packaging standards, and physical marking guidelines. Government identification must be removed from non-accepted supplies, and item unique identification is not required as specified by the service customer under DFARS 252.211-7003. Covered defense information applies, and the material has no shelf life constraint. Measuring and test equipment must be adequately maintained and calibrated. The place of performance is New Cumberland, Pennsylvania, with Courtney Minor as the primary point of contact.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVEThe contract is for a spacer sleeve item with part number 741073CL13 and NSN 5365016879226, under solicitation SPE4A5-26-T-302M, requiring delivery of one unit within five days to Fort Irwin, California. The item is classified as a critical application and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking specifications per MIL-STD-129. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and the item must not bear government identification if not accepted. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels based on criticality. FAA airworthiness approval is mandated via CDRL RQ019, and preservation, packaging, and marking adhere to DLA and FAA-specific rules. The item must be shipped via the fastest traceable means, excluding parcel post, with delivery FOB origin and inspection and acceptance taking place at destination. The contract includes no quantity variance and specifies no unique item identification per customer request. The supplier, RTX Corporation, must meet all technical data package requirements referenced in QAP 13873, with an expiration of the contract data requirement set for January 14, 2025, and the required delivery date is July 15, 2026.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
GIMBAL AND BRACKETThe contract specifies the procurement of three Gimbals and Brackets with part number 1878032 and NSN 6605-00-089-9500 under solicitation SPE4A5-26-T-299F, with a total contract value of $9.00 and a delivery requirement of 171 days from award, to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. All items must comply with MIL-STD-2073-1E for preservation and packaging, MIL-STD-129 for marking, and DLA packaging requirements, with no special marking required and no palletization beyond standard practices. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The contract references technical and quality standards from the DLA Master List, mandates zero-defect sampling under MIL-STD-1916 or comparable zero-based plans, and assigns verification levels of VII, IV, and II for critical, major, and minor attributes respectively. The supplier must adhere to CMMC Level 2 cybersecurity self-assessment requirements, implement configuration change management procedures, and prohibit the intentional use of mercury or mercury-containing compounds in any component, preservation, packaging, or marking, except for specific exempted applications defined by NAVSEA which must include secondary containment. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i), and all supplies must be cleared of government identification if not accepted. The original required delivery date is March 10, 2027, with a need ship date of January 17, 2027.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
PYROMETER, INDICATINGThe contract pertains to the procurement of one indicating pyrometer, identified by NSN 6685-01-350-9216 and part number 4200-001-001, supplied by King Nutronics Corporation as a commercial off-the-shelf item. Delivery is required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no quantity variance permitted. The item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special markings required. Packaging and preservation must adhere to DLA requirements and explicitly prohibit the use of mercury or mercury compounds in any form during preservation, packaging, or marking, except for functional uses in specific instruments or batteries as outlined by NAVSEA. Mercury-containing portable lamps and instruments must include shockproof design and a secondary containment boundary. The supplier must provide Safety Data Sheets aligned with OSHA’s revised Hazard Communication Standard and conforming labels per 29 C.F.R. 1910.1200, and ensure employee training on these requirements. Inspection and acceptance occur at the destination, with no need for item unique identification. The contract was issued under solicitation SPE4A5-26-T-301F, with a response deadline of July 29, 2026, and a required ship date of January 17, 2027.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325998
New
DIBBS
SCALE REMOVING COMPThe contract specifies the procurement of a scale removing compound identified by NSN 6850-12-382-7353 and commercial part number 56.00.562, supplied in container units with each container holding 100 tabs for a total of 150 tabs per container. A total of 216 containers are required to be delivered FOB destination within 144 days of contract award, with no tolerance for quantity variance. The product is classified as a commercial off-the-shelf item, and original manufacturer commercial packaging is mandatory—repackaging is prohibited. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code ZZ for unique requirements, and palletization must adhere to DLA packaging standards. The supplier must provide GHS-compliant Safety Data Sheets and approved product labels, which must be reviewed and approved by technical personnel before contract award, with copies submitted to the DLA Aviation HMIRS office. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined. The material has no shelf life restriction. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, CA, with transportation governed by DLA procedural notes C19 and C20. The solicitation is a total small business set-aside under NAICS code 325998, with a response deadline of July 29, 2026, and an award expected under contract number SPE4A5-26-T-301W.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325110
New
DIBBS
PROMOTER, CHEMICAL AThe contract is for the procurement of PROMOTER, CHEMICAL A, a commercial off-the-shelf (COTS) item identified by NSN 6850-01-719-2762 and part number AP-1, supplied by ANDPAK, INC in cases containing twelve 11.0 fluid ounce cans each. A total of nine cases are required under solicitation SPE4A5-26-T-304N, with delivery due within 20 days FOB destination. Strict packaging and marking standards apply, including compliance with MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and DLA packaging requirements, with special handling codes for hazardous materials and Type I shelf-life labeling. The item has a non-extendable 12-month shelf life requiring specific markings per special code 32. Mandatory documentation includes approved Safety Data Sheets and OSHA hazard warning labels, which must be reviewed and approved by technical personnel prior to award and submitted to the DLA Aviation HMIRS office. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and all attributes are assigned verification levels or AQLs as defined. All shipments must be sent via traceable freight, not parcel post, to the designated Nellis AFB delivery address. The contract incorporates applicable technical and quality requirements from the DLA Master List, with inspection and acceptance occurring at the destination and zero tolerance for quantity variance.
Petrochemical Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, COMPOUND PRESSThis contract specifies the procurement of a GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATOR with NSN 6685011318107 and part number SC4MC30CWRCNA, under solicitation SPE4A5-26-T-301Z, with a total quantity of 125 units to be delivered FOB origin within 219 days. The item is classified as a critical application item and must comply with technical specifications outlined in MIL-G-18997E and quality assurance procedures QAP-106. Mandatory adherence to DLA packaging requirements, MIL-STD-2073-1E preservation methods, and MIL-STD-129 marking standards is required, including special marking as a delicate instrument. Mercury and mercury compounds are strictly prohibited in all phases of manufacturing, packaging, and preservation except for specific functional uses such as batteries, lighting, or instruments approved by NAVSEA, and portable devices containing mercury must include shockproof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at origin, with no quantity variance permitted. Item Unique Identification is not required per the Service customer’s request. A separate first article test line item is included with one unit designated for testing; pricing for this line item is required, but no award will be made if the test is waived. The contract is a total small business set-aside under NAICS 334519, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must comply with all referenced technical, quality, and environmental restrictions set forth in the DLA Master List of Requirements, and transportation logistics follow DLAD Proc Note C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
DOOR, TROUGHThe contract pertains to the procurement of one unit of a door and trough assembly identified by NSN 4010-01-584-6194 and part number 5251292, sourced from ED ETNYRE & CO. The item is a wire rope assembly with no shelf life requirement and must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Packaging must adhere to MIL-STD-2073-1E with specific procedures for preservation, including preservative method 10, clean and dry conditions, and no cushioning material. Marking requirements follow MIL-STD-129, and palletization must meet DLA Packaging Requirements for Procurement. The delivery point is FOB origin with inspection and acceptance occurring at destination, and no quantity variance is permitted. The required delivery date is November 17, 2026, with a lead time of 110 days from order, and the shipment is directed to DLA Distribution San Joaquin at Tracy, California. The solicitation number is SPE4A5-26-T-303Y, issued under a federal procurement, with the point of contact being Hien-Van Trinh of the Department of Defense’s ASC Supplier Operation OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROOVEDThis contract specifies the procurement of a grooved coupling and clamp, identified by NSN 5340-01-714-1224 and part number NV1021906T001, for a quantity of three units under solicitation SPE4A5-26-T-298B. The item is classified as a critical application item supplied by Hamilton Sundstrand Corporation and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging, marking, and inspection standards set by MIL-STD-2073-1E and MIL-STD-129. All packaging and preservation methods must adhere to DLA’s RP001 guidelines, prohibiting the use of mercury or mercury-containing compounds in preservation, packaging, or marking, with specific exceptions for functional uses in batteries, instruments, sensors, and weapon systems as defined by NAVSEA. Mercury-containing portable lamps and instruments must include a secondary containment boundary and be shock-proof in compliance with NAVSEA 5100-003D. Delivery is required FOB origin within 171 days of contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract mandates strict adherence to DLA packaging and marking procedures, with no special marking required and palletization conforming to DLA standards. The delivery deadline is January 17, 2027, with the original required delivery date set for January 17, 2028. All shipments must be addressed to the DLA Distribution facility at DDSP New Cumberland and transportation logistics must follow DLAD Proc Notes C19 and C20. The contract was posted on July 21, 2026, with responses due by July 29, 2026, under NAICS code 332510 for industrial machinery manufacturing.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, TANGThe contract is for a single washer, tang, identified by NSN 5310-00-089-4828, under solicitation SPE4A5-26-T-301L, with a required delivery within 20 days after award. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date based on acquisition size. Packaging must comply with DLA standards, non-accepted supplies must have government identification removed, and bare items must be physically marked as required. Sampling inspection follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances mandated unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All unspecified attributes are treated as major. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026, and performance is to be delivered to JBPHH, HI, 96853-1801. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with Anthony Nickens listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details