Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SHEET, LIFT-DRAW

Active
SPE2DH-26-T-5551Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of disposable lift-draw sheets, specifically white synthetic spunlace material measuring 80 inches by 40 inches, designed for safe patient transfer from hospital beds to gurneys or stretchers. These sheets must be highly absorbent yet not waterproof and capable of supporting up to 1300 pounds, with a unit of issue consisting of 50 sheets per package. Three packages are required under purchase request 7017631831, and delivery must be completed within 20 days after award. The NSN and part number are 6530-01-503-8750, and bidders must clearly state the source and part number being offered. The solicitation, identified as SPE2DH-26-T-5551, was posted on July 28, 2026, with responses due by August 4, 2026, and is governed by DLA packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The place of performance is Fort Bliss, Texas, 79918-2527, with point of contact Tina Vu at DLA. The contract falls under NAICS code 423450 and is issued by the Department of Defense’s Medical Supply Chain FSH.

General Info

Procure 150 white synthetic spunlace lift sheets, 80x40 in, 1300 lb capacity, deliver to Fort Bliss in 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

21287 LIGHT INFANTRY AVENUE, FORT BLISS, TX, 79918-2527, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5551.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHEET,LIFT-DRAW
SHEET, LIFT-DRAW
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
LIFT-DRAW SHEET WHITE DISPOSABLE 80 IN. X 40 IN.
..
OVERALL LENGTH 80.000 INCHES NOMINAL
OVERALL WIDTH 40.000 INCHES NOMINAL
..
LIFT SHEET FOR HOSPITAL BED AND OR O.R.
TABLE TO TRANSFER PATIENT FROM BED
TO GURNEY OR STRETCHER
..
HIGHLY ABSORBENT, NOT WATERPROOF, MADE FROM
SYNTHETIC SPUNLACE MATERIALS
..
DISPOSABLE
..
STRONG ENOUGH TO HOLD UP TO 1300 LBS
..
UNIT OF ISSUE = PG OF 50
..
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6530-01-503-8750 Quantity: 3 PG Purchase Request: 7017631831QTY: 3 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
GOWN, HOSPITAL PATIENTThe contract specifies the procurement of 10 hospital patient gowns in size large, designed as unisex garments made from cotton/polyester fabric with an overlap back and back ties, featuring butterfly sleeves and engineered for intravenous use. Each gown is sold as a single unit, and bidders must clearly indicate the source and part number being supplied to ensure compliance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Government identification must be removed from any supplies that are not accepted. The item is identified by NSN 6532-01-434-3880 under purchase request 7017631850, with a delivery requirement of 20 days after order. The solicitation number is SPE2DH-26-T-5559, posted on July 28, 2026, with responses due by August 4, 2026. The contracting activity is managed by the Department of Defense under the Medical Supply Chain FSH, with performance occurring at Fort Bliss, Texas, and primary point of contact being Tina Vu via email and phone provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
ATROPINE SULFATE INAtropine Sulfate Injection, USP, is a sterile, nonpyrogenic, preservative-free, and non-DEHP product supplied in a 5 mL single-dose syringe with a 20-gauge by 1.5-inch protected needle featuring a male Luer lock adapter. Each milliliter contains 0.1 mg of atropine sulfate monohydrate and 9 mg of sodium chloride, resulting in a total of 0.5 mg of atropine per syringe. The medication is indicated for subcutaneous, intramuscular, or intravenous administration and is labeled RX only. The product must be stored at controlled room temperature between 20°C and 25°C (68°F to 77°F) and has a non-extendable shelf life of 24 months. Packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all DLA Master List of Technical and Quality Requirements take precedence over commercial packaging standards. The product is regulated by the FDA and is supplied by Pfizer Inc with NDC code 00409-4910-34. The contract, issued under solicitation number SPE2DP-26-T-4325, requires delivery of one pallet (PG) containing ten units to Fort Bragg, North Carolina, within 20 days of order placement, FOB destination. No quantity variance is permitted, and inspection and acceptance occur at the delivery point. The material is not classified as hazardous under FED-STD-313 and must be commercially packaged in accordance with ASTM D3951, unless overridden by DLA requirements. All packaging must be marked and labeled per DLA specifications, palletized as per RP001, and shipped via traceable means, excluding parcel post. The delivery is mandated for July 29, 2026, with the contract awarded to the Department of Defense, Medical Supply Chain Pharm FSA, and all technical, quality, and packaging specifications are governed by the DLA Master List in effect on the solicitation issue date. A referral must be sent via EBS to confirm bidder and manufacturer details prior to award.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
LIDOCAINE HYDROCHLOLidocaine Hydrochloride and Epinephrine, USP, is a parenteral injectable pharmaceutical product containing a 2 percent concentration of lidocaine hydrochloride and a 1:50,000 dilution of epinephrine bitartrate, supplied in 1.7 mL single-dose cartridges. Each unit of issue consists of a package of 50 cartridges, organized in five blisters of ten per cardboard box. The product must be stored at controlled room temperature below 25°C (77°F), protected from light, and must not be frozen. It is regulated by the FDA and has a non-extendable shelf life of 18 months as a Type I (Code K) item. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must ensure the product is sealed, protected from damage, and shipped in suitable commercial containers to guarantee safe delivery. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award date depending on acquisition type. This procurement is issued under Solicitation Number SPE2DP-26-T-4333 by the Department of Defense’s Medical Supply Chain Pharm FSA. One pack (PG) of 50 cartridges is required, with a delivery requirement of five days after award, delivered FOB destination to JBER, Alaska. The NSN is 6505-01-576-2767 and the purchase request number is 7017631646. The product must be supplied by an approved manufacturer with part number NDC66312-0181-16 or equivalent, and shipment must adhere to all DLA packaging standards, including commercial packaging for medical items and specific marking requirements. No quantity variance is permitted, and inspection and acceptance occur at the destination. The required delivery date is July 29, 2026, and the response deadline for the solicitation is August 3, 2026. The contracting officer must submit a referral in EBS for confirmation, including manufacturer and bidder details. Transportation and delivery logistics are governed by DLA procedural notes C19 and C20, with the point of contact for inquiries being Timothy McCauley.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
TOLNAFTATE CREAMTolnaftate Cream, USP, is a 1% topical antifungal cream supplied in tubes containing 15 grams each, with the unit of issue being a tube (TU). The product has a total shelf life of 36 months, and at the time of receipt by the first government activity, there must be a minimum of 31 months of remaining shelf life. It must be stored at controlled room temperature between 20-25°C (68-77°F), with short-term excursions allowed between 15-30°C (59-86°F) in accordance with USP standards. The cream is manufactured by Taro Pharmaceuticals U.S.A., Inc., with NDC 51672-2020-01, and is regulated by the FDA. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific references to RA001, RP001, RQ001, RS020, and RS001, which mandate compliance with FDA and DoD packaging, labeling, and shelf-life protocols. The product must be packaged in accordance with Commercial Packaging Standards as specified in the procurement document, with each unit sealed in a protective container and shipped in suitable exterior containers to ensure safe delivery via commercial carrier at the lowest rate to the designated destination. Packaging and marking must adhere strictly to Medical Marking Standard No. 1, superseding MIL-STD-129, and all labels must include required government identifiers. The shipment of 20 tubes is to be delivered FOB destination within 20 days, with no quantity variance permitted. Transportation must be via traceable means, excluding parcel post, and the item is to be delivered to the specified location in Bogalusa, Louisiana. The contract requires confirmation through EBS referral to the product specialist, ensuring proper vendor and manufacturer validation prior to award, and all documentation must comply with DLA’s acquisition and logistics directives, including palletization and hazardous material standards where applicable.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
PAD, SPLINE SPLINTThe contract is for the procurement of disposable PAD, SPLINE SPLINT units designed for use on the forehead restraint strap to prevent contamination from body fluids. Each package contains ten pads and is associated with the SK-300 SPLINE SPLINT II TRANSPORT SYSTEM, identified by the NSN 6530-01-265-3583, with a unit of issue of one package per ten units. The product is governed by specific technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements under identifiers R and I numbers, and must comply with DLA packaging regulations and protocols for removing government identification from non-accepted supplies. Bidders are required to clearly state the source and part number being supplied, with the specified NSN for this item being 6530-01-507-9533, and the quantity requested is one package under purchase request 7017631805. Delivery must be completed within 20 days after order, and the solicitation is issued under contract number SPE2DH-26-T-5560, with responses due by August 4, 2026. The procurement falls under NAICS code 423450, is managed by the Department of Defense through the Medical Supply Chain FSH, and the performance location is Fort Stewart, Georgia. Primary point of contact is Tina Vu, reachable via email and phone provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
SHOES, SHOWERThe contract specifies the procurement of adult shower shoes with a cross strap to secure the shoe in place, featuring a 0.750 inch sole, size small, and black color made from synthetic rubber with a non-slip surface. These items are packaged in units of 72 pairs per package and are identified by NSN 6532-01-469-7517. The order quantity is one package, with a delivery requirement of 20 days after award. The solicitation number is SPE2DH-26-T-5567, posted on July 28, 2026, with responses due by August 4, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance mandatory. The packaging must meet DLA packaging standards, and non-accepted supplies must have all government identification removed. The procurement is under the NAICS code 423450, managed by the Department of Defense’s Medical Supply Chain FSH, with performance occurring at Fort Bliss, Texas, and primary point of contact being Tina Vu at DLA.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
BASIN, WASHThis contract specifies the procurement of a 7-quart capacity, natural color basin made of corrosion-resistant steel for use in medical applications, identified by NSN 6530-00-771-0105 and associated part numbers from multiple suppliers including Medical Action Industries, Cardinal Health, VWR, and Polar Ware. The item is not regulated by the FDA and must be packaged in accordance with commercial standards as outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and units must be sealed to prevent damage during transit. Each unit must be packed in suitable shipping containers capable of safe delivery by common carrier at the lowest possible rate to the designated destination. The delivery is required within 20 days FOB destination, with no quantity variance permitted, and inspection and acceptance occur at the delivery point. The item is to be delivered to the 1AD Sustainment Brigade SSA at Fort Bliss, Texas, and must be shipped by traceable means excluding parcel post. The contract requires bidders to specify the manufacturer’s name and part number being offered and mandates that all packaging meet the DLA Packaging Requirements for Procurement, including palletization standards. The solicitation number is SPE2DH-26-T-5569, with a response deadline of August 4, 2026, and the required delivery date is July 30, 2026. The U.S. Department of Defense, through DLA Troop Support, is the issuing authority and has designated the primary point of contact for inquiries.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
SHOES, SHOWERThe contract is for the procurement of shower shoes designed for adult use, specified as size large, color black, constructed from synthetic rubber with a non-slip sole measuring 0.750 inches and featuring a cross strap design. The item is packaged in units of 72 pairs per package, with a single package to be delivered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible through the official DLA website, and compliance is mandatory. The removal of government identification from non-accepted supplies is also required under this procurement. The item is identified by NSN 6532-01-469-7520 under purchase request 7017631794, with a delivery deadline of 20 days after order placement. The solicitation number is SPE2DH-26-T-5554, issued on July 28, 2026, with responses due by August 4, 2026. The procurement is classified under NAICS code 423450 and falls under the Department of Defense, specifically managed by the Medical Supply Chain FSH. Performance location is Fort Bliss, Texas, 79918-2527, with Tina Vu as the primary point of contact. The contract is part of a federal procurement initiative via the DIBBS system, with no set-aside designation applied.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
MASK, RESPIRATORThe contract specifies the procurement of N95 respirators, identified by NSN 6515-01-422-5282, with a unit of issue of one box containing 120 units. Each respirator must meet the TC-84A-0006 certification for infection control and must have a shelf life of 60 months, with no more than nine months elapsed between the manufacturer’s production date and the delivery date to the government. All units must be individually sealed in commercial packaging designed to prevent damage and packaged in commercial shipping containers suitable for safe transport via common carrier at the lowest cost to the delivery point. Labeling must comply with Medical Marking Standard No. 1, including the manufacturer date, expiration or retest date, contract number, and lot number, and must reference the latest revision of MMS1A. Storage requirements mandate that respirators remain in original packaging, protected from contamination, dust, sunlight, temperatures outside the range of -4°F to +86°F, and humidity exceeding 80%. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The contract, identified as SPE2DS-26-T-279L, requires bidders to specify the source and part number being supplied and is set for delivery within five days of award to Suffolk, Virginia.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
Federal
Maintenance of Medical Gas & Vacuum (MGV) Systems-NIHThe National Institutes of Health, through its Office of Research Facilities, intends to award a Firm-Fixed-Price Indefinite-Delivery/Indefinite-Quantity contract for comprehensive inspection, testing, maintenance, repair, and related support services for Medical Gas and Vacuum Systems, Laboratory Air and Vacuum Systems, Instrument Air Systems, Variable Frequency Drives, and associated outlets, valves, and alarms at the NIH Clinical Center in Bethesda, Maryland. The contract has a base period of one year starting August 21, 2026, followed by four one-year option periods and a final six-month option period, with a maximum total performance duration of five years and six months extending through February 20, 2032. All work must comply with industry standards including NFPA 99 and ASSE Series 6000, and must ensure uninterrupted patient care and research operations. The contractor is required to provide ASSE-certified personnel, including ASSE 6010/6020/6040 technicians and access to an ASSE 6030 Medical Gas Systems Verifier, along with an on-site project manager and sufficient staffing depth and surge capability to meet operational demands. Emergency response must include a two-hour assessment and forty-eight-hour repair capability, and all activities must be documented through electronic reporting, preventive maintenance records, as-built documentation, and annual reports. This acquisition is a Total Small Business Set-Aside under NAICS Code 423450, and award will be made using a Best Value Tradeoff process under FAR Part 15, where non-price factors are significantly more important than price. Proposals must demonstrate technical capability, past performance in healthcare or research facility environments, and a robust staffing and quality control approach, with key personnel commitments and organizational charts required. Offerors must be registered in SAM.gov, complete all required representations and certifications, and submit proposals in three volumes—Technical, Past Performance, and Price—meeting strict page limits and formatting requirements, all in searchable PDF format and emailed to the Contracting Officer by the deadline of July 27, 2026. The contractor must adhere to stringent safety, insurance, and compliance mandates including Buy American provisions, Anti-Trafficking requirements, CUI safeguarding per Executive Order 13556, and compliance with the Service Contract Act wage determinations. All deliverables must be packaged and marked per government specifications, invoicing must follow electronic submission through the Treasury IPP, and
NIH A E Construction

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
Federal
Purchase of Lifepak CR2 4G (SIM) Defibrillators
US Consulate Frankfurt

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 423450
New
Federal
Replacement of Existing Steris Autoclave
National Institutes Of Health Olao

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 339113
New
DIBBS
TRAINING AID, CHEST SEAThis training aid is designed for use with the HYFIN chest seal system, providing realistic practice for applying both vented and occlusive chest seals on human skin and training manikins. It replicates the exact template of the HYFIN vent chest seal but features a less aggressive adhesive to ensure reliable adhesion during training without compromising surface reuse or skin safety. The product enables proper training of wound preparation and seal placement, including the accurate positioning of the vent over a simulated injury. Each seal comes individually packaged with a gauze pad for cleaning the application site prior to use, and the product is latex free to accommodate users with sensitivities. The unit of issue is a package containing two seals, and the item is identified by NSN 6910-01-690-8679 with a purchase request quantity of 30 seals across five packages. The solicitation is issued under contract number SPE2DH-26-T-5565 by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 4, 2026, and a required delivery within five days of award. Bidders must specify the source and part number of the product being offered. Compliance with DLA technical and quality requirements, packaging standards, and procedures for removing government identification from non-accepted supplies is mandatory. The product will be delivered to Monroe, Louisiana, and inquiries should be directed to Tina Vu at the provided contact information. The NAICS code 339113 identifies the classification as medical equipment manufacturing, and the acquisition is governed by DLA’s master list of technical and quality requirements effective on the solicitation issue date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
INDICATOR, STERILIZAThe product is a steam biological indicator designed for rapid and reliable monitoring of sterilization processes at 270°F and 275°F using gravity-displacement steam sterilizers. It features a self-contained design with a super rapid readout capability of just 50 seconds when used with the 3M Attest Auto-Reader 490, making it suitable for both qualification testing and routine monitoring. Storage should be maintained under normal room conditions between 49°F and 86°F, and it must not be stored near sterilants or other chemicals to ensure integrity. Each unit of issue is a box containing fifty indicators. The item is identified by NSN 6530-01-654-3553, with a purchase request for three boxes and a delivery requirement within five days of award. The solicitation is issued under contract number SPE2DH-26-T-5574, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH through the DLA. Bidders must specify the source and part number supplied, and the acquisition is subject to applicable technical, quality, and packaging requirements as defined in the DLA Master List of Technical and Quality Requirements. The contract includes provisions for removal of government identification from non-accepted supplies and applies covered defense information protocols. The place of performance is in Suffolk, Virginia, with Tina Vu listed as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
FILE, PULP CANAL, DENThis contract specifies the procurement of 36 sets of ready-steel K-files for endodontic use, each set containing six pre-sterilized stainless steel instruments with square cross-sections, sized 45 to 80 and measuring 25 millimeters in length. The files feature non-cutting safe-ended batt tips, pre-inserted silicon stops for depth control, and color-coded ergonomic handles designed for secure grip and precise tactile feedback during root canal cleaning, unclogging, and shaping procedures. Manufactured from premium stainless steel, these instruments are engineered for durability, sharpness, and resistance to fracture, making them suitable for high-demand clinical environments. The product is classified as a TYPE I (CODE S) item with a non-extendable shelf life of 60 months, and must comply with all DLA packaging, quality, and technical requirements as defined in the DLA Master List. The item is identified by NSN 6520-01-718-2167 and is subject to covered defense information protocols. Bidders are required to clearly state the source and part number being supplied. The solicitation is issued by the Department of Defense under the Medical Supply Chain FSH, with a response deadline of August 4, 2026, and delivery expected within five days of award to Suffolk, Virginia, 23435-5000.
Dental Equipment and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 316210
New
DIBBS
SHOES, SHOWERThe contract specifies the procurement of adult shower shoes with a cross strap for secure fit, featuring a 0.750 inch rubber synthetic sole, in black color, and designed to be non-slip. These items are packaged in units of 36 pairs per package and are identified by the NSN 6532-01-469-7522, with a single package quantity ordered under purchase request 7017637091. The solicitation, numbered SPE2DH-26-T-5566, was posted on July 28, 2026, with responses required by August 4, 2026, and delivery must be completed within 20 days after delivery order issuance. The item falls under NAICS code 316210 and is being procured by the Department of Defense through the Medical Supply Chain FSH office, with performance required at Fort Bliss, Texas, 79918-2527. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and compliance with DLA packaging standards and the removal of government identification from non-accepted supplies is mandatory. Primary point of contact for inquiries is Tina Vu, reachable via phone or email provided.
Footwear Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331313
New
DIBBS
LITTER, NONRIGID, POLELEThe contract specifies the procurement of three nonrigid, poleless litters designed for shoulder carry with quick-release straps, each capable of supporting a minimum weight capacity of 450 pounds. When unpacked, the litter measures 65 inches by 23 inches, and when packed, it must compress to dimensions of 10 inches by 7 inches by 1.5 inches thick, with a black finish. The item is classified under NSN 6530-01-600-7741 and is identified by manufacturer part number PHL-K-B from TACMED SOLUTIONS, LLC. It is regulated by the FDA as a Class I medical device under regulation 880.6900, requiring compliance with registration, listing, labeling, and GMP standards, even though a 510(k) premarket notification is not mandated. All units must be marked in accordance with the latest edition of the Medical Marking Standard No. 1, superseding MIL-STD-129, and packaging must meet DLA Packaging Requirements for Procurement (RP001) and MIL-STD-2073-1E standards. Each litter must be individually sealed in a commercial unit container and packed in suitable shipping containers that ensure safe, low-rate transport to the designated destination. Delivery is required within 84 days to APO AE 09227-0000, with the original delivery date set for July 28, 2026; no quantity variance is permitted. All items are subject to inspection and acceptance at the destination, and shipment must comply with DLA transport procedures including freight shipping to the specified facility in Kaiserslautern, Germany, with special attention to the medical marking standard and commercial packaging requirements for secure delivery.
Alumina Refining and Primary Aluminum Production

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
DISPOSAL CONTAINER,The contract calls for the procurement of 20 disposal containers specifically designed for the safe handling and disposal of hypodermic needles and syringes. Each container must measure between 6 to 7 inches in length and 1 to 2 inches in diameter, feature a securable cap, and include a lift-off cover to ensure safe containment and prevent accidental exposure. The product is identified by NSN 6530-01-645-6923 and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The contract also notes that Covered Defense Information may apply, requiring compliance with relevant data protection protocols. Delivery is required within 20 days of award, with performance location specified as Fort Bliss, Texas, 79918-2527. The solicitation, identified as SPE2DH-26-T-5564, was posted on July 28, 2026, with responses due by August 4, 2026. It falls under NAICS code 339113 for medical and surgical instrument manufacturing and is a federal procurement managed by the Department of Defense through the Medical Supply Chain FSH. Tina Vu is the primary point of contact, reachable via email and phone, with additional details available through the DIBBS portal. No set-aside classification is indicated, and the procurement is open to all qualified vendors meeting the specified technical, quality, and logistical requirements.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
GEL, TRANSMISSION, ULTRAThe contract specifies the procurement of 250 mL squeeze bottles of transmission gel for ultrasound applications, packaged in cases of 12 bottles per pack for a total of two packs. The gel is an aqueous, viscous, tinted formulation designed to be non-sensitizing, bactericidal, non-irritating to skin, non-injurious to transducers, non-flammable, and non-corrosive, with a pH range of 6.50 to 6.95. It is intended exclusively for use in ultrasound procedures and must meet strict shelf-life requirements: a non-extendable shelf life of 60 months from date of manufacture, with no more than nine months allowed to elapse between manufacturing and government delivery. All items must be marked in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, and bidders must provide the source and part number being offered. The NSN is 6525-00-529-3346, with a purchase request number of 7017631791 and a delivery requirement of 20 days after award. The solicitation number is SPE2DH-26-T-5553, posted on July 28, 2026, with responses due by August 4, 2026. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, with performance to be delivered to Fort Bliss, ZIP 79918-2527, and primary contact is Tina Vu at Tina.Vu@dla.mil or 445-737-1120.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
MOUNTING MEDIUM, MICROSThe contract specifies the procurement of a synthetic resin mounting medium for microscopy, with a refractive index of 1.52 when dry and a 60 percent solution in toluene or xylene, sold in 1-ounce bottles. Each unit must have a shelf life of 12 months, and no more than two months may have passed between the date of manufacture and delivery to the government. Packaging must comply with commercial standards, using sealed unit containers to prevent damage and exterior shipping containers suitable for safe delivery via common carriers at the lowest rate, including export packaging when required. All items must be labeled with the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number, adhering to Medical Marking Standard No. 1, which supersedes MIL-STD-129. The product is identified by NSN 6640-00-935-1485, with a unit of issue of one bottle equivalent to eight drops, and must be sourced with clear specification of the part number and manufacturer. Delivery is required within 20 days to Fort Bliss, Texas, under solicitation SPE2DH-26-T-5555, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, and all applicable defense information safeguards in place.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
MANIKIN, RESUSCITATIONThe contract specifies the procurement of a single set of an adult CPR training manikin designed for intermediate-level resuscitation instruction, featuring a medium skin tone and gender-neutral design to support inclusive training environments. The manikin is equipped with an integrated CPR rate monitoring system that uses LED indicators to visually guide correct compression rates between 100 and 120 per minute and emits an audible click when chest depressions reach the appropriate depth for effective compressions. It operates on two AA batteries and includes ten replacement face shield/lung bags and a durable nylon carry case for storage and transport. The unit is classified under the NSN 6910-01-708-0577 and must comply with all applicable DLA packaging and technical quality requirements as defined in the DLA Master List of Technical and Quality Requirements. Delivery is required within 20 days of award, with performance occurring at Norfolk, Virginia, under the procurement reference 7017638336 and solicitation SPE2DH-26-T-5572, which was posted on July 28, 2026, with responses due by August 4, 2026. The acquisition is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details