Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

SHEET, METAL

Open
SPE7M0-27-T-1413Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This procurement, solicitation SPE7M0-27-T-1413, is for the supply of one cold-rolled copper-nickel alloy metal sheet with dimensions of 0.187 inches thick, 48.00 inches wide, and 96.00 inches long. The contract is a small business set-aside issued by the DLA Weapons Support Maritime Supply Chain, with delivery required to the Puget Sound Naval Shipyard IMF in Bremerton, Washington. The material must adhere to strict dimensional requirements, and test coupons are not permitted. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory, and only listed suppliers are eligible for award. The contractor must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Rigorous marking and packaging standards apply, including adherence to MIL-STD-129 and MIL-STD-2073-1E, requiring waterproof continuous identification markings such as the DLA contract delivery order number, NSN, and manufacturer details. Packaging must include robust four-corner and side-edge protection with fiberboard coverage. Inspection and acceptance are conducted at the destination. The procurement incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, cybersecurity safeguarding of covered defense information, and the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing.

General Info

Procurement of one copper-nickel alloy metal sheet for the Puget Sound Naval Shipyard.

NAICS

331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

Place of Performance

1400 FARRAGUT AVE, BREMERTON, WA, 98314-5001, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

Read the document

Due in 13 days

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 13 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 1 solicitation documentRead every page
  • AI contract breakdown13 sections, Uniform Contract Format
  • Buyer contactEmail
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUSA

Full Description

Show more
SHEET,METAL
SHEET, METAL
COPPER-NICKEL ALLOY, COLD ROLLED
0.187 IN THK, 48.00 IN W, 96.00 IN LG
278.33 LB/SH (REF)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
SPE7M0-27-T-1413
SECTION B
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO) No sheets will be accepted unless they conform to exact dimensions per the item description: Test coupons are not allowed.
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3) SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD, AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-C-15726F(1) NOT 1 REVISION NR F DTD 12/24/2020 PART PIECE NUMBER: COMP 70-30, CR,SOFT TEMPER
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26210 REVISION NR DTD 07/29/2026 PART PIECE NUMBER:
SPE7M0-27-T-1413
SECTION B
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-C-3993C NOT 2 REVISION NR C DTD 09/20/1999 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AMS-STD-185A REVISION NR A DTD 03/01/2014 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018966832 0001 SH 1.000
NSN/MATERIAL:9535002231892
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:00 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW MIL-C-3993 PACKING Z = IAW MIL-C-3993 MARKING IAW MIL-STD-129
ADDITIONAL MARKING REQUIREMENTS: WHEN THE CONTRACT OR ORDER REFLECTS TWO UNITS (EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.) SHIPMENT MARKINGS SHALL INCLUDE THE QUANTITY OF BOTH UNITS. THIS MARKING DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
UNIT OR INTERMEDIATE UNIT CONTAINER PACKAGING REQUIRES:
- ROBUST FOUR CORNER MATERIAL PROTECTION
- FULL COVERAGE MATERIAL SIDE EDGE PROTECTION
SPE7M0-27-T-1413
SECTION B
PR: 7018966832 PRLI: 0001 CONT’D
FIBERBOARD OR BETTER TOP AND BOTTOM FULL COVERAGE MATERIAL PROTECTION
PARCEL POST ADDRESS:
N4523A
PUGET SOUND NAVAL SHIPYARD IMF
1400 FARRAGUT AVE
BREMERTON WA 98314-5001
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N4523A
PUGET SOUND NAVAL SHIPYARD IMF
MAINT FAC REC OFFICER BLDG 514
1400 FARRAGUT AVE
BREMERTON WA 98314-5001
US
M/F: (TCN) N4523A63034067
RDD: 310
PROJ: LO3 TP 1
SUPP ADD: Y DMI SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: 9B ADV: FC: F3
Need Ship Date:00/00/0000 Original Required Delivery Date:11/04/2026
SPE7M0-27-T-1413 NSN/Part Number: 9535-00-223-1892 Quantity: 1 SH Purchase Request: 7018966832QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331491
New
Federal
13-8 Mo Stainless Steel Welding Wire, AMS 5840, 0.045" Diameter, Spool
Solicitation # PR507991
Oak Ridge National Laboratory, managed by UT-Battelle LLC, is soliciting firm fixed price quotes for the procurement of 1,200 lbs of aerospace-grade 13-8Mo stainless steel welding wire. The material must be manufactured to AMS 5840 specifications with a diameter of 0.045 inches. Supplies may be delivered in standard 33 lb spools or 500 lb drums. While Weldtool is the specified brand, technically equivalent products are acceptable, though domestic sources are strongly preferred. Offerors must be authorized resellers and provide material certifications, SDS data sheets, and an authorized reseller letter. The procurement is governed by standard commercial terms and conditions under the Simplified Acquisition Threshold, including mandatory flow-down clauses from DOE Prime Contract No. DE-AC05-00OR22725. Key regulatory requirements include compliance with the Buy American Act, NIST SP 800-171 cybersecurity controls, and FAR 52.204-25 regarding prohibited telecommunications equipment. Shipping is FOB Destination for domestic orders and Delivered at Place for international shipments. Final acceptance is based on receipt inspection and a review of material certifications. Proposals must include a firm fixed price, a proposed delivery schedule, and completed abbreviated representations and certifications.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 331491
New
Federal
95--BEAM,STRUCTURAL
Solicitation # SPRPA127RZA37
Solicitation SPRPA127RZA37 is a negotiated request for proposal issued by DLA Aviation at Philadelphia for the procurement of structural beams, specifically part number 6532E776-5 (NIIN 015099974). This item is designated as a Critical Safety Item (CSI) used in crucial shipboard systems for aircraft launch and recovery, meaning that any defective material could result in serious personnel injury or loss of life. Consequently, the requirement mandates engineering source approval by the Naval Air Systems Command. Offerors not previously approved must submit a comprehensive source approval request, including configuration drawings and process sheets, to be eligible for award. The government will evaluate offers based on price, delivery timeframe, and past performance, with past performance weighted as more important than price. The contract includes a potential reverse auction and requires strict adherence to quality standards, including ISO 9001 or equivalent. Technical requirements specify 100 percent inspection for all critical and major characteristics, as well as mandatory First Article Testing (FAT) for one uncoated unit. Non-destructive testing must be performed by NADCAP or ISO 17025 accredited laboratories. Administrative requirements include electronic invoicing via Wide Area Workflow (WAWF) and packaging in accordance with MIL-STD-2073 and MIL-STD-129. The solicitation is issued under NAICS code 331491 with a small business size standard of 900 employees. All manufacturing and inspection records for these critical safety items must be maintained by the contractor for seven years. Proposals are due by December 14, 2026.
Pa DLA Aviation At Philadelphia

POSTED

1 day ago

DEADLINE

in 27 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

Get AI-powered intelligence on this solicitation and the ones like it

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS