Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SHEET, METAL

Active
SPE7M2-26-T-5718Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7M2-26-T-5718.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHEET,METAL
METAL SHEET ALUMINUM ALLOY 0.063 INCH THICK 48 INCH WIDE 144
INCH LONG
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ015: QUALIFIED SUPPLIERS LIST FOR MANUFACTURERS (QSLM)/QUALIFIED
SUPPLIERS LIST FOR DISTRIBUTORS FOR
TROOP SUPPORT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
SPE7M2-26-T-5718
SECTION B
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
FULL AND OPEN COMPETITION APPLY
CRITICAL APPLICATION ITEM
TDP Rev C Gen 3 IAW BASIC NON GOVT STD SAE AMS4027P REVISION NR P DTD 04/01/2022 PART PIECE NUMBER: ALLOY 6061 TMPR T6
TDP Rev C Gen 3 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev C Gen 3 IAW REFERENCE NON GOVT STD ASTM B666/B666M-20 REVISION NR M DTD 11/01/2020 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017603906 0001 SH 38.000
NSN/MATERIAL:9535002321882
DELIVERY (IN DAYS):0120
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M2-26-T-5718
SECTION B
PR: 7017603906 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM B660 PACKING Z = IAW ASTM B660 MARKING IAW MIL-STD-129
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
ADDITIONAL MARKING REQUIREMENTS: WHEN THE
CONTRACT OR ORDER REFLECTS TWO UNITS
(EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.)
SHIPMENT MARKINGS SHALL INCLUDE THE
QUANTITY OF BOTH UNITS. THIS MARKING
DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/02/2026 Original Required Delivery Date:01/23/2027
SPE7M2-26-T-5718 NSN/Part Number: 9535-00-232-1882 Quantity: 38 SH Purchase Request: 7017603906QTY: 38 Delivery: 120 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331491
New
DIBBS
Aluminum Alclad Metal Plate SupplyThe contract calls for the supply of aluminum alclad metal plates compliant with SAE AMS4049N, ASTM B666/B666M-20, and ASTM B660-23 specifications, requiring the T651 temper condition and strict adherence to defined dimensions and surface finish standards. All materials must be properly marked as per regulatory requirements to ensure traceability, quality, and compliance throughout the fabrication and installation lifecycle. The plates are intended for use in aerospace and defense applications where material integrity and performance under operational stress are critical. This is a total small business set-aside subcontract under NAICS code 331491, exclusively available to small business concerns as defined by the SBA and governed by FAR 19.5. Responses are due by August 3, 2026, with the contract award expected to support operations at Robins AFB, Georgia, 31098-1887. The solicitation is managed by the Department of Defense under the Construction & Equipment MRO SVC I organization, and all submissions must be made through the DIBBS platform via the provided link. The requirement emphasizes timely delivery of certified material that meets exacting military and industry standards without deviation.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
Supply of Perforated Aluminum Alloy Sheet MetalThe contract calls for the manufacture and delivery of perforated aluminum alloy 5052-H32 sheets compliant with military and ASTM specifications, requiring strict adherence to defined dimensional tolerances and perforation patterns. The material must meet exacting quality and finish standards suitable for defense applications, with all production processes subject to verification against established technical requirements. Deliveries are to be made to a specified performance location in Bremerton, Washington, with the zip code 98314-6001, and the work falls under NAICS code 331491, classifying it as other aluminum rolling, drawing, and extruding. This is a subcontract opportunity, posted on July 22, 2026, with a deadline for responses set for August 3, 2026. It is administered by the Department of Defense through the Puget Sound organization, indicating its alignment with defense supply chain needs. Participation is open to qualified subcontractors capable of meeting the technical, material, and scheduling demands of the specification. All proposals must be submitted via the provided DIBBS link to be considered, and failure to meet any requirement in the perforation design, alloy composition, or dimensional accuracy will result in non-compliance.
PUGET SOUND

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
Aluminum Alloy Sheet Metal Supply (5052-H32)The contract involves the supply of 476 aluminum alloy 5052-H32 sheets, each measuring 0.063 inches in thickness and 48 inches by 96 inches in dimension, with full adherence to military and ASTM specifications. All materials must be properly marked in accordance with Defense Logistics Agency requirements to ensure traceability and compliance. The materials are intended for use in defense-related applications, requiring strict quality control and documentation. The solicitation is structured as a subcontract under the NAICS code 331491, indicating it falls within the nonferrous metal rolling, drawing, and extruding industry. The opportunity was posted on July 22, 2026, with a response deadline of August 3, 2026. Performance is to be carried out at a location in New Cumberland, Pennsylvania, with the zip code 17070-5002. The contract is managed under the Department of Defense, specifically through its Construction & Equipment MRO Svc I office. The procurement is accessible via the DIBBS system, and interested parties must submit proposals through the designated online portal before the deadline to be considered for award.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
ARMOR PLATEThis contract specifies the procurement of aluminum alloy armor plate measuring 1.250 inches thick, 48.00 inches wide, and 144.00 inches long, with a reference weight of 829.44 pounds per piece. The material must comply with ballistic testing standards per MIL-DTL-46027 and is designated as a critical application item. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and any deviation from this requirement must be explicitly stated. Non-compliant bids are subject to rejection and may carry criminal penalties. The plate must be supplied in whole-foot lengths only, with no test coupons allowed, and must strictly adhere to dimensional tolerances. Each unit must be permanently marked with the DLA contract number, NSN, specification revision, alloy grade, manufacturer details, heat and lot numbers, and dimensions using approved methods such as stenciling or stamping—adhesive labels are required for small bars and tubes under 0.250 inches in diameter. A Certificate of Quality Compliance and mill certification are mandatory for every shipment and must be forwarded to the DLA Troop Support Contracting Officer. The material must be packaged per MIL-STD-2073-1E and marked in accordance with MIL-STD-129R, including dual unit markings when applicable. Preservation and packing methods must follow ASTM B660-23 and specify ZZ for preservation and Z for marking. Delivery is required FOB origin within 167 days, with an original due date of January 15, 2027, and a needed ship date of January 18, 2027. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation incorporates multiple technical and quality requirements from the DLA Master List, and suppliers must comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Coverage under the QSL program waives certain inspection requirements, but all supplies must be traceable and fully compliant. Failure to meet any requirement, including marking, documentation, or supplier eligibility, will result in rejection of the product and potential contractual penalties.
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METALThis contract specifies the procurement of aluminum alloy sheet metal with precise technical and quality requirements, including a thickness of 0.063 inches, width of 48 inches, length of 96 inches, and a weight of approximately 28.16 pounds per sheet. The material must conform to alloy 5052 in temper H32 and meet specifications SAE AMS-QQ-A-250/24C, ASTM B666/B666M-20, and ASTM B660-23, with full compliance to the referenced Technical Data Package revisions. All sheets must be supplied in whole-foot lengths only, with no test coupons permitted, and must bear continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions. A Certificate of Quality Compliance with mill materials certification is mandatory for every shipment and must be submitted to both the customer and the DLA Troop Support Contracting Officer. Markings must be applied via stamping or stenciling, using waterproof, non-contaminating fluids, and must remain legible under normal handling; adhesive labels are required for small bars, tubes, and shapes under 0.250 inches in nominal OD. Compliance with MIL-STD-129 and MIL-STD-2073-1E packaging standards is required, including Level A preservation per ASTM B660 and special marking instructions where applicable. The Qualified Suppliers List for Distributors (QSLD) is strictly enforced, and only suppliers listed on the QSLD are eligible to respond; any deviation must be explicitly noted and may result in rejection or criminal penalties for unauthorized substitution. Delivery is FOB origin, with no quantity variance allowed, inspection and acceptance occurring at destination, within 17 days of order placement, to the designated DLA distribution facility in New Cumberland, PA. The original required delivery date is December 7, 2026, with a need ship date of August 21, 2026.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METALThe contract specifies the procurement of aluminum alloy metal plates measuring 0.375 inches thick, 36 inches wide, and 96 inches long, with a reference weight of 126.96 pounds per piece, manufactured to SAE AMS4027P Revision P and ASTM B666/B666M-20 and B660-23 standards, with temper T651. All material must be supplied in whole-foot lengths and strictly conform to the exact dimensions specified, with no test coupons permitted. Each plate must be continuously marked with the DLA contract delivery order number, NSN, specification number and revision, alloy grade and type, manufacturer’s name, heat and lot number, and dimensions, using stamping or stenciling methods that are legible, waterproof, stable, and non-contaminating. Adhesive labels are required for smaller bars, tubes, and shapes under 0.250 inches in nominal OD. A Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including robust corner and edge protection, full top and bottom coverage with fiberboard or better, and marking per MIL-STD-129 with special preservation methods per ASTM B660 and B666. This contract is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) under DLA Troop Support, and any quotation not based on an approved QSLD supplier must explicitly declare a deviation. Non-compliance with the QSLD requirement constitutes an unauthorized substitution and may trigger criminal penalties. Government inspection requirements are waived for QSLD-compliant suppliers, including COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006, except for Foreign Military Sales. The NSN 9535-00-495-7813 is to be delivered in 33 pieces (PM), FOB Origin, within 55 days, with a required delivery date of November 15, 2026. Inspection and acceptance occur at the destination facility in Tracy, California, with shipping addressed to DLA District San Joaquin. The unit price is $33.00 per piece, and the total contract
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METALThe contract specifies the procurement of aluminum alloy high magnesium metal plates measuring 0.375 inches thick, 60.00 inches wide, and 240.00 inches long, with a reference weight of 518.40 pounds per unit. The material must conform to ASTM B928/B928M-15 (R 2023), referenced drawing 14153 01735 Revision A, and quality assurance procedures outlined in QAP 13873, with full compliance to MIL-STD-129R for marking and packaging. Supplier eligibility is restricted to those listed on the Qualified Suppliers List for Distributors (QSLD), as mandated by DLA Troop Support, and quotations from non-approved distributors are considered deviations and may result in rejection. Every shipment must include a Certificate of Quality Compliance with mill certification, and continuous identification markings are required on each unit, including contract number, NSN, specification, alloy, grade, temper, manufacturer’s name, heat and lot number, and exact dimensions. Material must be supplied in whole-foot lengths only, with permissible marking methods limited to stamping or stenciling using non-contaminating, waterproof, and durable fluids. Packaging must comply with MIL-STD-2073-1E and ASTM B660 for preservation and marking, with special requirements for ZZ-coded packaging. The contract is a total small business set-aside under NAICS 331491, with 11 units required, delivered FOB origin to the DLA New Cumberland facility in Pennsylvania. Delivery is due within 167 days of award, with the original required delivery date set for September 10, 2026, and a need ship date of January 18, 2027. Inspection and acceptance occur at destination, with zero variance permitted in quantity.
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METALThe contract specifies the procurement of perforated aluminum alloy sheet metal with precise dimensional and technical requirements: 0.051 inch thickness, 36 inches wide, 96 inches long, with 0.188 inch diameter perforations spaced 0.438 inches center-to-center in a staggered vertical pattern. The material must conform to SAE AMS-QQ-A-250/8C and ASTM standards for alloy 5052 in H32 temper, and must be supplied in whole-foot lengths only without test coupons. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the QSLD are eligible for award, and any deviation must be explicitly declared. Unauthorized substitutions may result in criminal penalties. A Certificate of Quality Compliance must accompany each shipment, and continuous identification markings are required on every unit, including DLA contract number, NSN, specification revision, alloy, temper, manufacturer, heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material. Packaging must follow MIL-STD-2073-1E and ASTM B660 for preservation, with marking per MIL-STD-129R, and palletization adhering to DLA packaging requirements. The product is subject to destination inspection and acceptance, with no quantity variance permitted. The delivery address is the DLA Distribution Depot in Bremerton, WA, with a required delivery date of December 24, 2026, and the contract number is SPE8E4-26-T-1911. Technical and quality requirements are governed by the DLA Master List, and the contract is governed under defense information controls with applicable CDRLs and DD Form 1423 certification mandates.
PUGET SOUND

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METALThis contract specifies the procurement of a metal plate made of aluminum alclad with a 0.0075 inch cladding thickness on both sides, measuring 0.500 inches thick, 24 inches wide, and 72 inches long, weighing approximately 87.26 pounds per unit. The material must conform to SAE AMS4049N Revision N, ASTM B666/B666M-20, and ASTM B660-23 standards, with a temper of T651. Every shipment must include a Certificate of Quality Compliance, and the product must be marked on each unit with mandatory identifiers including the DLA contract delivery order number, NSN, specification number and revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stenciling or stamping, excluding die stamping, and must not contaminate the material. All plates must be supplied in whole-foot lengths only. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation methods per ASTM B660 and labeling per MIL-STD-129, including dual-unit markings for shipments with dual units of measure. The delivery is FOB origin, with inspection and acceptance at destination, and must be completed within 167 days, with an original required delivery date of February 25, 2027. The NSN is 9535-00-232-7551, quantity is 11 pounds per meter, and the purchase request is 7017585638. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and non-compliance constitutes an unauthorized substitution exposing the supplier to criminal and civil penalties. Quality conformance inspections and source inspection requirements are waived for QSLD-compliant suppliers. The solicitation is a total small business set-aside under NAICS code 331491, with a response deadline of August 3, 2026.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METALThis contract requires the delivery of 292 sheets of aluminum alloy 5052 in H32 temper, measuring 0.080 inches thick, 48 inches wide, and 96 inches long, with each sheet weighing approximately 35.75 pounds. All material must strictly adhere to the specified dimensions, with no test coupons permitted, and must be supplied in whole foot lengths only. The sheets must be certified with a Certificate of Quality Compliance, including mill material certification, and this documentation must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on every unit, requiring the DLA contract number, NSN, specification revision, alloy and temper, manufacturer name, heat and lot numbers, and dimensions, all applied via stamping or stenciling in legible, waterproof, and durable characters that do not contaminate the material. Packaging must comply with MIL-STD-2073-1E and ASTM B660 Level A requirements, using preservation code ZZ and marking code Z as specified, with palletization following DLA packaging standards and labeling per MIL-STD-129R. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and any deviation from this requirement must be explicitly declared; non-compliant products may be deemed unauthorized substitutions subject to criminal penalties. The contract is a total small business set-aside under NAICS code 331491, with delivery due in 22 days to the DLA Distribution Depot in Bremerton, WA, FOB origin, and no quantity variance permitted. Technical requirements are governed by multiple referenced standards including SAE AMS-QQ-A-250/8C, ASTM B666/B666M-20, ASTM B660-23, and MIL-STD-129R, with quality conformance inspection requirements waived for QSLD-compliant suppliers. The contract is issued under solicitation SPE8E4-26-T-1907 and includes covered defense information, with all documentation subject to DLA’s Master List of Technical and Quality Requirements.
PUGET SOUND

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
Federal
95--PLATE,METALThe U.S. Department of Defense, through DLA Troop Support, is soliciting quotes for 11 metal plates with NSN 9535010123426 under solicitation number SPE8E426T1918, which is a total small business set-aside classified under NAICS code 331491. The procurement is structured as a combined solicitation with all responsible small businesses eligible to submit electronic quotes, and hard copies of the solicitation are not available. The RFQ must be accessed electronically via the provided SAM.gov link, and digitized drawings and military specifications can also be retrieved or ordered electronically. Quotes are due by August 3, 2026, and the delivery point is W1A8 DLA Distribution with an anticipated delivery timeline of 167 days after award. The primary point of contact for inquiries is listed via email, with all correspondence directed to the buyer identified in Block 5 of the official solicitation document located under the Additional Information link. The office responsible for this procurement is based in Philadelphia, Pennsylvania.
DLA Troop Support

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
Federal
95--ARMOR PLATEThe U.S. Department of Defense through DLA Troop Support is soliciting quotes for 47 units of armor plate identified by NSN 9535014544727 under solicitation number SPE8E426T1925. This procurement is classified as a combined solicitation exclusively set aside for Women-Owned Small Businesses, with the NAICS code 331491 indicating classification under other fabricated metal product manufacturing. All responsible sources meeting the eligibility criteria may submit electronic quotes by the deadline of August 3, 2026, with deliveries required to W1A8 DLA Distribution within 167 days of award. The solicitation is exclusively available online via the SAM.gov portal, and no hard copies are provided; digitized drawings, military specifications, and standards must be accessed electronically. Proposals must be submitted electronically through the designated platform, and inquiries should be directed to the point of contact listed in the solicitation’s block 5 or via the provided DLA email address. Performance location details are unspecified, but the contracting office is based in Philadelphia, Pennsylvania.
DLA Troop Support

POSTED

2 days ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThis contract pertains to the procurement of an electrical plug connector, identified by part number 10-260390-07S and NSN 5935-00-490-4523, with a quantity of three units to be delivered within 35 days under solicitation SPE7M2-26-T-5745. The product must comply with military specification MIL-DTL-55330 and adhere to strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with no special markings required, and preservation methods specified in SPE7M2-26-T-5745 Section B. The item is classified as a restricted source requiring government engineering approval, and bare parts must be marked with the contract number, NAWC CAGE, and part number unless superseded by associated drawings. The contract prohibits the use of Class I ozone-depleting chemicals and strictly forbids the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, weapon systems, and specific navsea-approved reagents. Portable mercury-containing devices must feature shock-proof construction and secondary containment per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The item does not require unique identification per DFARS 252.211-7003(c)(1)(i), and all requirements are enforceable under the terms of the purchase request 7015894423, with a total contract value of $3.00 per unit.
Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332312
New
DIBBS
ROLLER, ENERGY ABSORThe item specified is a ROLLER, ENERGY ABSORBER with NSN 1710-00-045-7237, requiring a metal casting manufacturing process and associated tooling for production. Eight units are to be procured under solicitation SPE7M2-26-T-5712, with a response deadline of August 3, 2026, and delivery expected 211 days after order placement. The item is subject to strict export control regulations under either ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons regardless of location, and DFARS 252.225-7048 governs its handling. Access to controlled technical data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completed mandatory training on handling DOD export-controlled data, and formal approval from DLA. The place of performance is New Cumberland, PA, and the contracting activity is under the Department of Defense’s Nuclear Reactor Program. Primary point of contact is Alisha Blanton, reachable via email and phone for procurement inquiries.
Fabricated Structural Metal Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLUID
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, ELThe contract specifies the procurement of electrical insulation sleeving identified by NSN 5970000891454, with a total quantity of 3,584 feet split across three delivery lines of 31 feet, 1,541 feet, and 2,012 feet respectively. Delivery is required within 160 days from contract award, with FOB origin terms and a permitted quantity variance of plus or minus 10 percent. Inspection and acceptance occur at the destination, and all materials must be supplied on reels or spools, packaged per MIL-STD-2073-1E, labeled per MIL-STD-129, and palletized according to DLA packaging requirements. The product must comply with SAE AS23053/5 and AS23053C standards, and is classified as a qualified item under the QPL for electrical connector assemblies and contacts. Strict prohibitions ban intentional addition of mercury or mercury compounds, except for approved applications such as batteries, fluorescent lamps, sensors, or weapon systems, with portable mercury-containing devices required to have shock-proof housing and secondary containment as per NAVSEA 5100-003D. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and configuration changes require formal engineering change proposals or variance requests. Shipping destinations include Tinker AFB Oklahoma, Hill AFB Utah, and Robins AFB Georgia, each with specific parcel and freight addresses. The contract was issued under solicitation SPE7M2-26-T-5710 by the Department of Defense, Nuclear Reactor Program, with a response deadline of August 3, 2026.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, ROTARYThis contract is for the procurement of a rotary switch identified by NSN 5930013266810 and part number M15291/2-075, with a required quantity of 10 units. The item is classified as a critical application product and must comply strictly with military technical specifications MIL-DTL-15291/2C and MIL-DTL-15291H, both dated in 2022, and is subject to qualification on the Qualified Products List. All components must adhere to DLA’s master list of technical and quality requirements, with sampling governed by MIL-STD-1916 or comparable zero-based plans, requiring zero non-conformances unless otherwise contracted. Mercury and mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lamps, sensors, and authorized chemical reagents; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The use of ozone-depleting substances is fully prohibited without explicit written approval from the contracting officer. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with preservation governed by MIL-DTL-28786. Delivery is scheduled for 168 days after contract award, with FOB origin terms, no quantity variance allowed, and inspection and acceptance occurring at the destination. Shipping must be directed to DLA Distribution San Joaquin in Tracy, California, and transportation logistics follow DLAD Procurement Notes C19 and C20. The solicitation was issued on July 23, 2026, with responses due by August 3, 2026, and the original required delivery date is March 20, 2027, with a need ship date of January 19, 2027. The item falls under NAICS code 334419 and is procured by the Department of Defense’s Nuclear Reactor Program.
Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335313
New
DIBBS
HANDLE, MANUAL CHARGThis contract is for the procurement of 21 units of a manual charge handle identified by NSN 5925-00-622-2294, issued under solicitation SPE7M2-26-T-5723 with a response deadline of August 3, 2026, and a delivery requirement of 168 days after award. The acquisition is a total small business set-aside under FAR 19.5, classified under NAICS code 335313, and managed by the Department of Defense’s Nuclear Reactor Program. All supplies must comply with DLA packaging requirements and technical quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. The item must not contain mercury or mercury-containing compounds unless specifically exempted for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or approved chemical reagents by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. Additionally, no government identification may be removed from non-accepted supplies, and offerors must submit complete data packages for both the primary and alternate parts. The place of performance is specified as New Cumberland, Pennsylvania, with David Larsen of DLA serving as the primary point of contact.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332111
New
DIBBS
BAR, METALThe contract covers the procurement of 202 linear feet of corrosion-resistant cold-finish annealed round steel bar , 3 inches in diameter, with lengths strictly in whole feet between 10 and 12 feet, and a weight of approximately 24.03 pounds per foot. The material must conform to SAE AMS-QQ-S-763D Revision D and be classified as Class 304, CF, Annealed, Descal, with full compliance to referenced standards including ASTM A700-14, MIL-STD-129R, and SAE AMS2806. All units must be marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling methods that are legible, waterproof, and non-contaminating; adhesive labels are required for bars under 0.250 inches nominal OD. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with preservation methods compliant with ASTM A700 and special codes Z and ZZ for marking and packaging. Mercury and mercury-containing compounds are strictly prohibited in the material, preservation, packaging, and marking, except for exempted functional applications as specified by NAVSEA. Class I ozone-depleting chemicals are also banned. The supplier must be on the Qualified Suppliers List for Distributors (QSLD) under DLA Troop Support requirements, and non-compliance constitutes an unauthorized substitution with possible criminal penalties. The contract waives source inspection requirements for approved QSLD suppliers, and all deliveries are FOB origin with inspection and acceptance at destination. The shipment must be delivered within 168 days to the designated DLA distribution facility in New Cumberland, PA, with a permitted quantity variance of plus or minus 10%.
Iron and Steel Forging

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334519
New
DIBBS
CONTACTOR, MAGNETICThis contract is for the procurement of three magnetic contactor starters, designated by part number 6957ED14-4A and NSN 6110-00-872-1475, under solicitation SPE7M2-26-T-5708. The item is classified as a critical application and must comply with stringent quality and technical requirements outlined in the DLA Master List, including tailored higher-level quality provisions applicable to both manufacturers and non-manufacturers. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and all attributes must be verified at defined levels: VII for critical, IV for major, and II for minor. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking except under specific exempted uses such as batteries or instrumentation approved by NAVSEA, and any permissible mercury-containing devices must include a secondary containment system compliant with NAVSEA 5100-003D. The contract mandates full adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-PRF-23199 for preservation methods, with no use of mercury in any packaging materials. Items must be palletized per DLA packaging standards and marked with special requirement code ZZ. Delivery is FOB origin with a strict 168-day lead time, and the delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania. Zero variance is permitted in quantity, and inspection and acceptance occur at the destination. The unit of issue is each (EA), with a total contract value of $3.00 per unit. The original required delivery date is June 30, 2027, with a need ship date of January 19, 2027. All technical, quality, and logistics specifications are tied to the DLA’s authoritative documents and must be maintained in accordance with the latest applicable revisions in effect on the solicitation issue date.
Other Measuring and Controlling Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
PISTON, CONNECTORThe contract requires the delivery of 30 PISTON, CONNECTOR units with part number 626964-3R and NSN 1710-01-665-6304, under solicitation SPE7M2-26-Q-0665, with a delivery deadline of 729 days after award. Serialization is mandatory for both the parts and their packaging to ensure full traceability throughout the supply chain, and all serialized and lot-numbered items must be accounted for, including any material scrapped during production. Re-branding that obfuscates original markings such as part number, serial number, or CAGE code is strictly prohibited, and contractors must notify the DLA Contracting Officer if serialization is impractical due to size, material constraints, or excessive cost. Material Receipt Inspection (MRI) is required at NAVAIR LKE prior to final delivery, necessitating the inclusion of a Production Testing Inspection Report and complete material certification package with each part or shipment, especially if parts are shipped individually. All items must be delivered to the specified address at Joint Base MDL, NJ, attn: Drew Flast. Technical data associated with this item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and applying equally to foreign nationals employed by U.S. entities. Compliance with DFARS 252.225-7048 is required, and access to the controlled data is limited to contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and have received explicit approval from the DLA controlling authority. The item falls under NAICS code 336413, is managed by the Department of Defense’s Nuclear Reactor Program, and all bid responses must be submitted by July 30, 2026. The point of contact for inquiries is Kyle Barr, with delivery performance expected at a location in San Diego, CA.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334519
New
DIBBS
COMPASS, MAGNETIC, UNMOUThis contract is for the procurement of 1,665 magnetic, unmounted compasses with NSN 6605-00-553-8795 under solicitation SPE7M2-26-T-5749, issued as a total small business set-aside. Delivery is required within 161 days after award, with goods to be shipped FOB origin and inspected and accepted at the destination. All items must comply with rigorous technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality requirements and cybersecurity maturity model certification level 2 self-assessment compliance. The product specification is defined by TDP Rev B Gen 2 per drawing NFES1814 and quality assurance procedure QAP-106. Strict packaging requirements mandate adherence to MIL-STD-2073-1E, MIL-PRF-23199, and MIL-STD-129 for marking, labeling, and barcoding, with palletization governed by DLA packaging standards. Mercury and mercury-containing compounds are explicitly prohibited in the product, its preservation, packaging, and marking, except for approved functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or Navsea-specified reagents, which must include a secondary containment and be shock-proof under NAVSEA 5100-003D. The commodity is classified as a critical application item, with zero variance permitted in quantity. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of July 23, 2026 and original delivery deadline of July 6, 2027. All materials must conform to federal unit of issue standards, and transportation must follow DLA Procurement Notes C19 and C20. Contact for inquiries is David Larsen at the Department of Defense, Nuclear Reactor Program.
Other Measuring and Controlling Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333415
New
DIBBS
FILTER ELEMENT, AIR CONThe contract specifies the procurement of four air conditioning filter elements with NSN 4130-01-723-8128 for delivery within 168 days of award, under solicitation SPE7M2-26-T-5734 issued by the Department of Defense’s Nuclear Reactor Program. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date depending on acquisition size. Export control regulations apply as the item contains technical data subject to ITAR or EAR, prohibiting disclosure to foreign persons without authorization from the Department of State or Commerce, with access restricted to contractors holding JCP certification, having completed required DLA training, and being approved to handle such data. Configuration changes require formal engineering change proposals or variance requests, and non-accepted supplies must have all government identifiers removed. The point of contact for inquiries is David Larsen at david.larsen@dla.mil, with performance occurring in New Cumberland, PA 17070-5002.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
RELAY, SOLID STATEThis contract specifies the procurement of 18 solid state relays with part number 86031-001 and NSN 5945012914462, supplied by TE Connectivity Corporation under solicitation SPE7M2-26-T-5755. The requirement is for delivery in 234 days, FOB origin, with zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and DLA-specific packaging requirements, including palletization and marking per MIL-STD-129, with special marking code ZZ indicating unique contract conditions. The relays are designated as a critical application item and must adhere to strict configuration control and engineering change procedures. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified exemptions such as functional use in batteries, fluorescent lamps, sensors, weapon systems, and chemically defined reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. All individual unit packages must be marked in accordance with IPC/JEDEC J-STD-609 to clearly identify lead content and other material attributes, with placement specifications detailed in the standard. The delivery address is DLA Distribution Depot Hill in Hill AFB, Utah, and the required ship date is March 26, 2027, with the original delivery deadline set for April 9, 2027. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with the applicable revision controlled by the solicitation or award date depending on acquisition size.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details