Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Sheet Metal Materials and Components Supply

Active

State & Local

Response Deadline08/27/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of pre-fabricated and raw sheet metal components such as flashings, gutters, downspouts, and trim, all of which must comply with SMACNA, ASTM, and specific project requirements to ensure quality and performance. These materials are essential for building envelope systems and must meet exacting industry standards for durability, corrosion resistance, and dimensional accuracy. The solicitation is issued as a subcontract under NAICS code 332322, indicating the focus is on sheet metal work fabrication, and is managed by the Iowa agency with no set-aside designation. Bidders must submit responses before the deadline of August 27, 2026, at 7:00 PM, with the solicitation posted on August 2, 2026. The place of performance and agency office address details are not specified, suggesting flexibility in delivery or centralized procurement management. All proposals must be submitted through the designated online portal at the provided URL, and no point of contact is listed, implying that inquiries should be directed through the platform. Participation is open to qualified suppliers capable of fulfilling volume requirements and adhering to technical specifications without deviation.

General Info

Supply pre-fabricated sheet metal components meeting SMACNA and ASTM standards by August 27, 2026, via online portal.

Agency

IowaView Agency

NAICS

332322 - Sheet Metal Work ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 27

Submission deadline

Response Deadline

08/27/2026, 07:00:00 PM UTCin 24 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyIowa

ContactsNo contacts available

OfficeN/A

Organization / Agency

Iowa

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of pre-fabricated or raw sheet metal components including flashings, gutters, downspouts, and trim meeting SMACNA, ASTM, and project specifications.

Similar Contracts

Same NAICS industry code

Manufacture and Supply of PAD EYE (NSN 5340012194533)The contract requires the fabrication, packaging, labeling, and delivery of 50 precision metal PAD EYE components identified by NSN 5340012194533, adhering strictly to military and Defense Logistics Agency specifications. All work must be performed to ensure full compliance with technical standards for functionality, durability, and traceability, with final delivery targeted to the place of performance in New Cumberland, Pennsylvania, zip code 17070-5002. The contract falls under NAICS code 332322, indicating it is classified as a subcontract within the forged and stamped metal product manufacturing sector, and is issued by the Department of Defense under the LAND SUPPLY CHAIN organization. The solicitation was posted on August 2, 2026, with a firm response deadline of August 13, 2026, requiring all proposals to be submitted before that time. The contract is not set aside for any specific small business category and is procured through the DLA’s DIBBS portal, with the official UI link provided for submission and documentation purposes. No point of contact details are listed, and all communication or queries must follow standard DLA subcontract procedures outlined in the solicitation documentation accessible via the provided link.

LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Electrical Backshell and Cable Clamp Adapter ManufacturingThe contract involves the manufacture and supply of twelve units of electrical backsheets and cable clamp adapters identified by NSN 5935011580041, requiring full compliance with military specifications for packaging, preservation, marking, and hazard communication. These components are critical for military-grade electrical systems and must meet stringent quality and durability standards to ensure operational reliability in demanding environments. The work is classified as a subcontract under NAICS code 332322, indicating the focus on wiring device manufacturing, and is being managed by the Department of Defense through its Maritime Supply Chain ESOC Buys office. Performance of the contract is specified to occur at a location in JBER with a ZIP code of 99505-4600, and all delivery and compliance requirements must be fulfilled by the response deadline of August 13, 2026. The solicitation was posted on August 2, 2026, and interested parties are expected to submit proposals through the official DIBBS platform before the deadline.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

Supply of Access Covers (NSN: 5340011800621)The contract requires the manufacture and supply of five metal access covers identified by NSN 5340011800621, with strict adherence to Department of Defense packaging, preservation, and marking standards as mandated by the Defense Logistics Agency. All units must meet specified technical and logistical requirements to ensure compatibility and readiness for military use. The opportunity is structured as a subcontract under NAICS code 332322, targeting industrial manufacturers capable of producing defense-compliant components. Performance is designated for Tracy, California, with a ZIP code of 95304-5000, indicating the delivery and distribution point for the completed items. The solicitation was posted on August 2, 2026, with a response deadline set for August 13, 2026, allowing interested parties approximately eleven days to submit proposals. The contracting entity is the Land Supplier Operations Engines division within the Department of Defense, and the opportunity is accessible via the DIBBS portal using the provided link. No set-aside designation or specific small business preferences are indicated, meaning the contract is open to all qualified contractors regardless of size or status. Compliance with DLA standards and timely delivery to the specified location are critical to meeting contractual obligations.

LAND SUPPLIER OPNS ENGINES

POSTED

about 19 hours ago

DEADLINE

Manufacture and Supply of Switchplate Cover (NSN: 1285012126490)The contract calls for the fabrication and delivery of a precision metal switchplate cover identified by NSN 1285012126490, manufactured to meet rigorous military specifications. The product must comply with all applicable MIL-STD requirements for materials, dimensions, finish, and performance, ensuring reliability in demanding operational environments. Packaging and labeling must adhere strictly to Department of Defense standards to facilitate proper handling, storage, and identification throughout the logistics chain. Delivery is expected to a military address in FPO with ZIP code 96677, and the work falls under NAICS code 332322 for fabricated metal product manufacturing. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and is structured as a subcontract under the Maritime Supply Chain division of the Department of Defense.

MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305015645336)The contract calls for the manufacture and delivery of 31 units of machine screws identified by NSN 5305015645336, with strict adherence to federal and military standards for packaging, labeling, and hazardous materials handling. All components must meet required specifications to ensure compatibility and safety in defense applications, and the delivery location is specified as Tracy, California, with a zip code of 95304-5000. The procurement is classified as a subcontract under the NAICS code 332322, which corresponds to other fabricated wire product manufacturing, indicating the work involves precision fabrication of threaded fasteners for government use. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, leaving a limited window for qualified suppliers to submit proposals. The contracting authority is the ASC Commodities Division under the Department of Defense, underscoring the critical nature of the items for military operations. There is no set-aside designation, meaning any eligible subcontractor may bid, and no point of contact is listed in the data, suggesting proposals must be submitted through the official DIBBS portal linked in the notice. Compliance with packaging and labeling requirements is non-negotiable, as failure to meet these standards could result in rejection of the entire supply.

ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Precision Fabrication and Assembly of Tool Storage HolderThe contract entails the precision fabrication and assembly of a tool storage holder in strict accordance with a military technical data package and associated engineering drawings. Work includes all required metal cutting, forming, welding, and final assembly operations to meet rigorous defense standards. The project is classified as a subcontract under NAICS code 332322, targeting specialized metal fabrication services for defense applications. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and performance will be conducted under the oversight of the Department of Defense, specifically the LAND SUPPLIER OPNS VEHICLE SPT organization. All deliverables must adhere to government specifications without deviation, ensuring full compliance with military requirements for durability, functionality, and quality.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

Precision Metal Fabrication – Angle Bracket ManufacturingThe contract pertains to the precision manufacturing of an angle bracket conforming to NSN 5340016019507, encompassing all necessary fabrication processes including cutting, bending, drilling, and surface finishing to meet stringent military specifications. The work is classified under NAICS code 332322, indicating it falls within the scope of fabricated metal product manufacturing, and is structured as a subcontract under the Department of Defense’s Defense Logistics Agency. Production must adhere to exacting military standards to ensure dimensional accuracy, structural integrity, and durability under operational conditions. The contract was posted on August 1, 2026, and the place of performance and point of contact details are unavailable, but the procurement reference links to a DIBBS award record for tracking and compliance purposes.

Defense Logistics Agency

POSTED

DEADLINE

Safety Barriers, Fencing, and Crowd Control SupplyThe contract calls for the supply and installation of temporary safety barriers, fencing, stanchions, and crowd control systems designed to encircle the rink perimeter, ensuring compliance with public safety regulations and resistance to adverse weather conditions. All materials and components must meet approved standards for durability, stability, and crowd management, with a focus on preventing accidental access and maintaining orderly spectator movement during events. The installation must be performed with precision to accommodate the unique layout of the rink and accommodate anticipated crowd sizes without compromising safety or accessibility. This is a subcontract opportunity issued by the Parks and Recreation Department of the City of Santa Fe Springs in California, with a posted date of August 1, 2026, and a deadline for responses set for September 3, 2026, at 9:00 PM. The NAICS code 332322 indicates the work falls under fabricated metal product manufacturing, specifically focusing on structural metal fabricating. The contract does not specify a set-aside designation, and no point of contact information is provided. Interested parties must review the full details through the provided vendor portal link to submit proposals that align with the requirements for timing, materials, and on-site execution.

Parks and Recreation Department of City of Santa Fe Springs

POSTED

DEADLINE

in about 1 month

Field Device Enclosure & Cabinet SupplyThe contract seeks the supply of NEMA-rated traffic control cabinets and enclosures designed to protect roadside electronic equipment in harsh outdoor conditions, ensuring reliable operation of traffic management systems. These enclosures must meet stringent environmental and durability standards to safeguard sensitive electronics from weather, dust, moisture, and physical damage across Texas roadways. The solicitation is structured as a subcontract with a response deadline of August 24, 2026, and is categorized under NAICS code 332322, which pertains to the manufacturing of electrical and electronic manufacturing equipment. The Texas Department of Transportation is the contracting agency, and performance is expected to support infrastructure projects throughout the state. While specific delivery locations and quantities are not detailed, the requirement emphasizes compliance with NEMA standards for outdoor use, indicating a focus on technical specifications related to ingress protection, material quality, and environmental resilience. Subcontractors must be prepared to meet all technical, logistical, and quality assurance benchmarks to successfully fulfill the order and support the state’s traffic control modernization efforts.

Texas Department of Transportation

POSTED

DEADLINE

Stainless Steel Toilet Partitions and Access PanelsThe contract entails the supply and installation of stainless steel toilet partitions and access panels meeting SS 304 or SS 316 specifications, with strict requirements for corrosion resistance and surface finish to ensure durability in high-moisture restroom environments. The work must comply with industry standards for material quality and craftsmanship, ensuring long-term performance and hygiene compliance in public facilities managed by the California Department of Parks & Recreation. Performance is required in Contra Costa County, with a response deadline of September 2, 2026, and the opportunity is issued as a subcontract under NAICS code 332322, which pertains to architectural and structural metals manufacturing. The solicitation was posted on July 31, 2026, and is accessible via the CalE procure platform. All submissions must meet technical and compliance criteria outlined in the solicitation, and contractors are expected to deliver turnkey solutions including delivery, installation, and final inspection to meet the agency’s operational and safety standards.

California Department of Parks & Recreation

POSTED

DEADLINE

in about 1 month

Steel Doors and Frames Supply and InstallationThe contract requires the supply and installation of steel doors and frames that meet ANSI/SDI A250.4 and A250.10 standards, ensuring compliance with industry-specific performance, safety, and durability requirements. All components must feature prime painted surfaces and be capable of meeting stringent physical endurance criteria to withstand operational demands over time. The work is classified as a subcontract under NAICS code 332322 and is being procured by the Texas Department of Public Safety. Proposals must be submitted by August 14, 2026, with the solicitation posted on July 31, 2026, through the Texas SmartBuy portal. The place of performance and specific location details are not specified, but performance is expected to support state facilities under the agency’s jurisdiction.

Department of Public Safety

POSTED

DEADLINE

Supply of Impact Dog Crate (Aircraft-Grade Aluminum Enclosure)The contract entails the manufacture and delivery of a custom K-9 dog crate designed to meet the demanding requirements of Baltimore County law enforcement operations. The crate must be constructed from aircraft-grade aluminum with military-grade hardware to ensure maximum durability and resilience under extreme conditions. Precision-drilled ventilation is required to maintain optimal airflow for the canine’s safety and comfort, while a secured locking mechanism must prevent unauthorized access and withstand forceful impacts. The unit is intended for operational use by police K-9 units and must conform to strict standards for reliability, safety, and performance in high-stress environments. The solicitation was posted on July 31, 2026, with responses due by August 12, 2026, and is classified as a subcontract under NAICS code 332322, which covers forged steel and other metal stamping. The contracting entity is the Baltimore County Police Department operating under Maryland state jurisdiction, though specific office details and point of contact information are not provided. The place of performance and delivery location are unspecified, but the crate must be capable of deployment across the county’s operational zones. All components must be procured, fabricated, and assembled to guarantee compliance with the specified material and structural requirements without deviation.

Police Department

POSTED

DEADLINE

More opportunities from Iowa

Same awarding agency

Site Safety and Temporary ControlsThis contract, titled Site Safety and Temporary Controls, outlines the requirements for installing and removing temporary fencing, barriers, and access controls to ensure site security and public safety during construction activities. The work is classified under NAICS code 238990, indicating it pertains to other specialty trade contractors, and is structured as a subcontract opportunity. The contract was posted on August 2, 2026, with a response deadline of August 27, 2026, at 7:00 PM. The issuing agency is the State of Iowa, with no specific city or address details provided for the office or place of performance, indicating the location may vary depending on project needs. Interested parties must submit their proposals through the designated online portal before the deadline, and while no set-aside provisions are specified, the opportunity remains open to qualified subcontractors meeting the safety and operational requirements for temporary site control systems.

All Other Specialty Trade Contractors

POSTED

about 19 hours ago

DEADLINE

Architectural Sheet Metal InstallationThe contract calls for the supply and installation of architectural sheet metal components including flashings, gutters, downspouts, roof edge assemblies, and trim, all of which must be fabricated and installed in strict accordance with SMACNA standards, the International Building Code, and the specific manufacturer's guidelines. All work is expected to meet high-quality performance and durability requirements, ensuring long-term weather protection and structural integrity for building envelopes. The subcontract is part of a larger construction effort under the Iowa agency, with materials and labor required to align with industry best practices for metal roofing and drainage systems. The solicitation was posted on August 2, 2026, with responses due by August 27, 2026, and falls under the NAICS code 238210 for roofing contractors. The place of performance and exact project location are not specified in the provided data, but the work will be carried out under the oversight of the Iowa agency through the SciQuest bidding platform. Subcontractors must be prepared to comply with all technical specifications, safety protocols, and contractual obligations associated with public infrastructure projects in Iowa, and should note that no set-aside provisions are designated for this opportunity.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 19 hours ago

DEADLINE

Independence Mental Health Institute Infirmary Building Roof Replacement

Solicitation # RFB951900-01

The Iowa Department of Administrative Services is soliciting bids for the removal and replacement of the roof on the Infirmary Building at the Independence Mental Health Institute located at 2277 Iowa Avenue in Independence, Iowa. The project involves replacing primarily asphalt shingles along with sections of flat roofing and is scheduled to commence on September 28, 2026, with an expected completion date of May 28, 2027. Bids must be submitted electronically through the IMPACS Electronic Procurement System no later than 2:00 p.m. on Thursday, August 27, 2026, and must include a bid security amounting to five percent of the total bid value, submitted as a bid bond, cashier’s check, or certified check from a solvent U.S.-chartered bank. Late submissions will not be accepted. A public bid opening will occur at 3:30 p.m. on the same day via a Microsoft Teams meeting and teleconference, accessible through a provided link and dial-in number. The state reserves the right to reject any or all bids and to waive any irregularities if doing so serves the best interest of Iowa. All bidders must adhere to state and federal affirmative action and equal employment opportunity requirements, and the project is exempt from Iowa sales tax with no Davis Bacon wage requirements applicable. Bidders are required to submit any product substitution requests by 10:00 a.m. on August 20, 2026, in accordance with Section 01 2500 Substitution Procedures, even if specifications do not explicitly permit equivalents. An optional pre-bid meeting is scheduled for August 13, 2026, at 10:00 a.m. at the Independence Mental Health Institute’s Plant Operations Building, which includes a site review of the Infirmary Building and is strongly encouraged for all potential bidders. Bidding documents, including updated drawings and the project manual dated July 31, 2026, prepared by 10Fold Architecture + Engineering, are available for purchase through Rapids Reproductions during regular business hours. Questions regarding the solicitation must be directed to the issuing officer, Michael Bradbury, by August 20, 2026, via phone or email. This procurement is issued under solicitation number DASIowa-RFB951900-01 and is open for competitive bidding without a specific set-aside

Roofing Contractors

POSTED

about 19 hours ago

DEADLINE

Specialty Fabrication of Piping ComponentsThe contract titled Specialty Fabrication of Piping Components entails the off-site manufacture of piping spools, bends, and assemblies designed to minimize the need for on-site welding, particularly in confined and challenging work environments. By shifting significant fabrication work to controlled shop conditions, the initiative aims to enhance safety, improve quality control, and accelerate project timelines. The work falls under NAICS code 332311, indicating it is classified as pipe fitting and related manufacturing, and the nature of the agreement is structured as a subcontract. The solicitation was posted on August 1, 2026, with a firm response deadline of August 17, 2026, at 7:00 PM. The contracting entity is the State of Iowa, with no specific city, state, or postal address details provided for either the agency or the place of performance. All submissions and inquiries must be directed through the provided online portal at https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=DASIowa.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

Pipe Insulation and Thermal ProtectionThe contract titled Pipe Insulation and Thermal Protection involves the installation of high-temperature insulation on steam piping to enhance safety and improve energy efficiency within facilities operated by the state of Iowa. This subcontract is issued under NAICS code 238290, which corresponds to other building equipment contractors, indicating the work requires specialized trade expertise in thermal protection systems. The solicitation was posted on August 1, 2026, with proposals due by August 17, 2026, at 7:00 PM, allowing interested parties a sixteen-day window to submit bids. The place of performance is not explicitly defined, suggesting work may occur at multiple Iowa state facilities where steam piping systems require insulation upgrades. Although no specific point of contact or set-aside provisions are listed, the contract is managed under the Iowa agency’s procurement system, accessible through the provided online portal for submission and inquiries.

Other Building Equipment Contractors

POSTED

DEADLINE

Piping System Testing and CommissioningThe contract pertains to the post-installation testing and commissioning of a reworked steam piping system, specifically requiring hydrostatic testing to verify structural integrity, comprehensive leak detection to ensure system seal integrity, and operational verification to confirm proper functionality under real-world conditions. All work must adhere to industry standards for steam systems and be completed following the installation of modified or replacement piping components to guarantee safety and efficiency before the system is returned to service. The solicitation is classified as a subcontract with a NAICS code of 541330, indicating it relates to engineering services, and is issued by the Iowa agency with a response deadline of August 17, 2026. The work must be performed at the site where the steam piping system has been reworked, though specific location details are not provided. Interested parties must submit their proposals by the listed deadline to be considered, and all testing activities are expected to be documented thoroughly to satisfy regulatory and operational compliance requirements.

Engineering Services

POSTED

DEADLINE

Steam Control Valve and Actuator InstallationThe contract is for the supply, removal, and installation of steam reducing and actuated valves, with full responsibility for alignment, bolting, and integration into the existing steam system. All work must meet precise technical standards to ensure operational safety and efficiency, and the contractor is expected to manage the entire process from delivery to final commissioning. The scope includes handling old valves, installing new components, and verifying system compatibility and performance under steam pressure conditions. This subcontract is issued by the State of Iowa with a solicitation posted on August 1, 2026, and responses due by August 17, 2026. The North American Industry Classification System code 332912 identifies the work as related to other fabricated metal product manufacturing, specifically fitting and other fabricated pipe fittings. The place of performance is not specified beyond the state level, and there is no set-aside designation. Interested parties must access the bid portal via the provided link to review full requirements and submit proposals.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Steam Piping System Rework and WeldingThe contract entails a complete rework of the steam piping system located in the basement of a correctional facility operated by the state of Iowa. The scope includes the full removal of existing piping, fabrication and installation of new fittings, precision welding, rigorous pressure testing to ensure system integrity, and final reinstallation in accordance with safety and operational standards. All work must comply with industry best practices and must be executed without disrupting the facility’s essential operations, given the critical nature of the location. The project is classified under NAICS code 238220, indicating it falls under plumbing, heating, and air-conditioning contracting, and is issued as a subcontract opportunity with no set-aside provisions. Bids are due by August 17, 2026, and interested parties must submit through the specified online portal prior to the deadline.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Mount Pleasant Correctional Facility - Building 20 Automated Valve Refit

Solicitation # 005-RFB-2942-2027

The Iowa Department of Administrative Services is soliciting competitive bids for welding and piping services to refit Building 20 at the Mount Pleasant Correctional Facility with a new automated steam valve system to support heating in the MLO Building. The contract requires the full scope of work including demolition of existing steam pressure-reducing valves and piping, fabrication and installation of a new 4-inch steam header with six 2-inch threaded outlets, installation of new actuated valves with isolation and union fittings, routing of a 4-inch relief line to the building exterior, tie-in of the water heater to both high- and low-pressure steam systems, and reintegration of existing steam backfeed piping. All work must comply with applicable codes, involve certified welding, and include proper structural supports, wall penetrations with fire and weather sealing, and full testing and commissioning. The contractor must provide as-built drawings, manufacturer documentation, operation and maintenance manuals, and a commissioned test report. The work is expected to commence in mid-to-late August 2026 with substantial completion by September 30, 2026, and includes a mandatory site visit on August 11, 2026. Bids must be submitted by August 17, 2026, through the designated online portal, with bidders required to certify and resubmit any amendments received prior to the deadline. The contract will be non-exclusive, allowing the Lead Agency and participating entities to procure similar services through other means. Contract performance begins upon execution of the agreement and expires after successful completion of testing, commissioning, and invoice submission. A one-year warranty covers all materials and workmanship, obligating the contractor to repair or replace any defective components at no cost to the Agency. Failure to do so may result in the Agency using funds to hire an alternative vendor and charging the original bidder. The solicitation, numbered DASIowa-005-RFB-2942-2027, is open to qualified bidders and does not guarantee exclusive award; the Agency retains full discretion in selecting contractors based on responsiveness, competitiveness, and conformance to technical requirements.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Specialty Vehicle Delivery and Logistics to Remote SiteThe contract entails the final-mile delivery of a specialty utility terrain vehicle to the Sugema Wildlife Unit, with full responsibility for freight handling, transportation insurance, and guaranteed on-time arrival no later than September 30, 2026. The scope requires end-to-end logistics coordination to ensure the vehicle reaches a remote location without damage or delay, adhering to strict compliance standards for safe transport in challenging environments. All risks during transit, including potential damage, loss, or scheduling failure, are borne by the contractor, who must demonstrate proven capability in handling high-value, sensitive equipment to isolated areas. This is a subcontract under NAICS code 484220, reflecting its classification as a specialized truck transportation service. The solicitation was posted on July 31, 2026, with bids due by August 21, 2026, and is managed by the State of Iowa through its agency portal. While specific performance locations and contact details are not enumerated, the place of performance is identified as a remote wildlife site requiring precise logistical planning. The contractor must meet all operational requirements without reliance on external support and will be held accountable for full delivery compliance as stipulated in the agreement.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Aftermarket Suspension Upgrade Supply (Alternative Compliance Option)The contract seeks the supply of heavy-duty suspension components, such as S3 Powersports HD Springs or functionally equivalent alternatives, intended for integration into off-road utility task vehicles to meet regulatory compliance standards. Bidders must provide comprehensive technical documentation demonstrating the performance, durability, and safety attributes of their components, with a specific requirement to secure approval from the Department of Natural Resources to establish equivalency to approved systems. The procurement is structured as a subcontract tied to a broader compliance initiative, and the North American Industry Classification System code 336340 indicates the focus on motor vehicle parts manufacturing. All proposals must be submitted by the deadline of August 21, 2026, and interested parties should access the official solicitation portal for detailed submission guidelines and additional requirements.

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE

Supply of Heavy-Duty Utility Task Vehicle (UTV) with Upgraded SuspensionThe contract requires the supply and delivery of one new 2026 Can-Am Defender 6x6 Limited or an equivalent utility task vehicle (UTV) equipped with heavy-duty suspension, an enclosed cab, full HVAC capability, a winch, and a reinforced front bumper. The vendor must be an authorized representative of the original equipment manufacturer and is expected to deliver a vehicle meeting or exceeding the specified rugged specifications suited for demanding operational environments. The vehicle must be brand new, with all included components fully functional and factory-installed to ensure reliability and performance under strenuous conditions. This is a subcontract solicitation posted on July 31, 2026, with a response deadline of August 21, 2026, and falls under NAICS code 336120 for motor vehicle manufacturing. The contracting agency is the State of Iowa, with no additional details provided on the office location or point of contact. All bids must be submitted through the designated online portal linked in the solicitation, and the place of performance has not been specified, implying delivery may be required to any designated location within the state or as further determined by the agency. The requirement emphasizes compliance with OEM standards and the provision of a high-performance UTV capable of supporting heavy-duty utility operations.

Heavy Duty Truck Manufacturing

POSTED

DEADLINE